PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Tooth Demineralization”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84Linked to original sources

Transmission electron microscopic appearance of dentin matrix in type II dentin dysplasia.

Dentin matrix of demineralized primary and permanent teeth with type II dentin dysplasia was studied by transmission electron microscopy. The coronal dentin of a maxillary third molar exhibited a normal structure. In the radicular dentin, tubules were few in number; the major part of the dentin was composed of thick, curvy bundles of cross-striated collagen fibers. In the most aberrant areas of the radicular dentin, coarse collagen fibers measuring up to 140 nm in thickness were observed. The dentin of the primary tooth showed a similar, but somewhat less irregular, structure.

Collagen↗

A clinical evaluation of guided tissue regeneration with a bioabsorbable matrix membrane combined with an allograft bone graft. A series of case reports.

THE PURPOSE OF THIS STUDY was to evaluate the clinical effectiveness of a surgical technique in treating periodontal defects. The technique combined tetracycline treatment of a root planed root, grafting of the osseous defect with a demineralized freeze-dried bone allograft combined with tetracycline and the placement of a bioabsorbable matrix membrane, made of polylactic acid softened with citric acid ester. Thirty defects were treated in 27 patients. Statistically significant changes, as a result of the surgical procedure, were observed in marginal recession (mean: 0.5 mm), probing depth reductions (mean: 5.7 mm), and attachment level gain (mean: 5.2 mm). No statistically significant difference existed between the results in the furcation and non-furcation groups. The defects with probing depths > or = 10 mm had a greater mean probing depth reduction (7.4 mm) and mean attachment level improvement (7.2 mm) than the defects with < 10 mm probing depths (probing depth reduction 4.5 mm and attachment level gain 3.9 mm). The proposed surgical procedure seemed to be an effective method to treat periodontal defects.

Adult↗

A comparison of glass-ionomer cement and calcium hydroxide liners in amalgam restorations.

This study compared the caries inhibition and microleakage of two liners under amalgam restorations. Thirty-two molars received mesio-occlusal and disto-occlusal Class II cavity preparations. Calcium hydroxide was randomly placed as a liner in one preparation of each tooth and glass-ionomer cement liner was placed in the other. Amalgam restorations were placed. Teeth were axially loaded and an acid-protective varnish was placed. Teeth were placed into artificial saliva for 3 months, thermocycled, and cycled through a caries challenge. Sections were obtained from 20 teeth and photographed under polarized light. The remaining teeth were placed in 2% basic fuchsin and sectioned. A t-test indicated that restorations with glass-ionomer cement liners exhibited significantly less demineralization and microleakage than did restorations with calcium hydroxide liners.

Calcium Hydroxide↗

Acquired acid resistance of dental hard tissues by CO2 laser irradiation.

OBJECTIVE: This investigation was performed to evaluate the effect of CO2 laser irradiation on the acquired acid resistance of dental hard tissues to artificial caries-like formation and the ultrastructure of lased areas was morphologically investigated in vitro. SUMMARY BACKGROUND DATA: In recent years, many studies have been carried out to evaluate the effect of the CO2 laser on the enhanced resistance to artificial caries formation of enamel. However, a limited number of papers concerning its effect on dentin have been published. METHODS: A CO2 laser of 10.6 microns wavelength was used to irradiate human enamel and dentin samples from 20 extracted human molar teeth, and samples were subjected to 2 microliters of 0.1 M lactic acid solution (pH 4.8) for 24 h at 36 degrees C. The parts per million (ppm) of calcium ion (Ca2+) dissolved in each solution was determined by atomic absorption spectrophotometry and the morphological changes were investigated by scanning electron microscopy (SEM). RESULTS: The lowest mean Ca2+ ppm was recorded in the samples irradiated at 3 W, followed by 2 W, 1 W, and unlased samples. SEM observation showed that the lased areas were melting with solidification of the smear layer. Even after acid demineralization, the lased surfaces were almost unchanged. CONCLUSIONS: The results of this study suggested that CO2 laser irradiation could sufficiently melt and solidify the enamel and dentin surfaces and thus enhance resistance to artificial caries-like formation.

Acids↗

Effect of topical F- solutions on caries-like lesions in root surfaces.

Topical F- solutions, NaF, SnF2, TiF4, or Fe-Al-NaF, were applied to root surfaces to examine the effect on caries-like lesions produced in vitro. Extracted premolars were treated with a solution for 10 min prior to a 20-day period in acid gel. The lesions were studied by microradiography and light microscopy, and concentration profiles of 12 elements were determined by secondary ion mass spectrometry. The results indicated that the solutions retarded the development of lesions. The greatest effect was obtained with TiF4 and SnF2 solutions. Element analyses revealed that high concentrations of F (up to 3.5%) accumulated in the outer third of the lesion and that SnF2 and TiF4 formed depots in the cementum, although both Sn and Ti also penetrated the lesion. NaF had a weaker effect on lesion formation, but induced a high F concentration in the demineralized zones. The Fe-Al-F solution affected the lesion only marginally and deposited a relatively low F concentration in the lesion, although Fe and Al penetration and depot formation were noted.

Adolescent↗

Use of an intra-oral model to evaluate 0.05% sodium fluoride mouthrinse in radiation-induced hyposalivation.

The present study was undertaken to evaluate the effect of a twice-daily topical application of a 0.05% NaF mouthrinse on de- and remineralization in the oral cavities of subjects suffering from radiation-induced hyposalivation. Six subjects each wore a bonded intra-oral appliance containing a sound and a demineralized human enamel slab for four weeks. During that period, the subjects used 0.05% NaF rinses, twice daily, instead of the 1.1% NaF gel that had previously been a part of their preventive regimen. Salivary flow rates, plaque pH profiles following a 10% sucrose rinse, S. mutans and lactobacillus counts, fluoride clearance, and enamel microhardness were determined during the study. Sound enamel samples displayed no evidence of demineralization, and the previously demineralized enamel showed remineralization in the outer 50 microns in three of the six subjects. The results suggest that a twice-daily oral rinse with 0.05% NaF can prevent demineralization and enhance remineralization in subjects with radiation-induced hyposalivation.

Bacteria↗

Accelerated reattachment with cementogenesis to dentin, demineralized in situ. I. Optimum range.

This study confirms an original report describing accelerated reattachment with cementogenesis to root dentin, surgically exposed and demineralized in situ. It additionally describes results of 250 experiments on over 1000 teeth in mongrel dogs and cats designed to identify an optimum range of demineralization related to type of agent, pH, and time of application. This optimum range consistently induces flap reattachment with cementogenesis, while demineralization rates above and below this range enhance reattachment relative to undermineralized controls, but do not consistently induce new cementum. Although most controls demonstrated some reattachment with partial cementogenesis, none produced complete repair as did properly demineralized root surfaces and approximately one-third showed spithelial migration to the apical borders of the wound. No demineralized teeth demonstrated this control result. Small species differences in the response to root demineralization and the degree of hypermineralization of roots adjacent to chronic periodontal pockets, may make optimum ranges determined in this animal study slightly low for human pocket reaattachment techniques.

Animals↗

[Trials of remineralization of artificially produced enamel lesions].

The purpose of the study was checking in vitro whether after application of calcifying preparations remineralization occurs of artificially damaged enamel prisms. The study was carried out on 32 enamel samples obtained from 8 human teeth. For remineralization saturated solutions were used of phosphate-calcium compounds in the form of fluid or gel. The degree of demineralization and remineralization of enamel was assessed on the basis of images of enamel breaks in JSM-50A scanning microscope. Partial remineralization of artificially damaged enamel was found. Detailed evaluation of the remineralization progress requires extension of investigation methods.

Calcium Phosphates↗

Bonding of mild self-etching primers/adhesives to dentin with thick smear layers.

PURPOSE: To compare the microtensile bond strength (microTBS) and the ultrastructure of resin-dentin interfaces of four self-etching systems that were applied to dentin with thick smear layers. METHODS: Human third molars were ground with 180-grit silicon carbide papers to expose deep coronal dentin. A 3-mm vertical slit was made along the diameter of each tooth to fit a glass cover slip, dividing each tooth into two bonding surfaces. Two 2-step, self-etching primers (ABF experimental system and Imperva Fluoro Bond) and two single-step, self-etching adhesives (One-Up Bond F and AQ Bond) were examined. Adhesives were applied to one side of the teeth passively, and to the other side with continuous agitation for the same self-etching period. Incremental composite buildups were performed and beams with cross-sectional areas of 0.81 mm2 were prepared for microTBS evaluation. Demineralized, bonded specimens were processed for TEM examination. RESULTS: Two-way ANOVA showed that both the adhesive type and the application mode significantly affected microTBS results. However, the interaction of these two factors was not statistically significant (P > 0.05). For each adhesive, agitation produced significantly higher microTBS than passive application. With passive application, all systems diffused through thick smear layers and formed thin hybrid layers in intact dentin. With continuous agitation, smear layers were completely dispersed or dissolved, and thicker hybrid layers with upstanding collagen fibrils were observed.

Analysis of Variance↗

On the chemical and physical nature of erosions and caries lesions in dental enamel.

The aim of the present paper was to study the relation between the development of enamel erosion and caries lesion. Intact teeth were exposed to a gently agitated 50 mM acetate buffer, with or without fluoride for various periods of time. Further, intact teeth were exposed to an agitated 0.2 M HCl solution. It was found that irrespective of experimental conditions the aqueous phase was initially unsaturated with respect to both hydroxyapatite and fluorapatite during which period fluorhydroxyapatite was dissolved. Histological examination showed that the dissolving apatite originated from the enamel surface and the resulting lesion exhibited the signs of a dental erosion. The depth of the erosive lesion was found to be a direct function of the amount of mineral dissolved before the aqueous phase became saturated with respect to fluorapatite. The calcium, phosphate and fluoride dissolved made the aqueous phase first saturated and later supersaturated with respect to fluorapatite and a reuptake of fluoride in the enamel began, now under development of a caries-like lesion with preservation of the surface layer over a subsurface demineralizing zone. The demineralization depended on the volume of the aqueous phase. In conclusion, in a closed system with a limited amount of unsaturated solution a double lesion, an erosion over a caries lesion, will develop according to the changing saturation with respect to fluorapatite.

Apatites↗

Effects of demineralization depth on microtensile bond strength to human dentin.

PURPOSE: To evaluate the effect of different phosphoric acid concentrations (10% and 37%) on the microtensile bond strengths (microTBS) of three dentin adhesive systems with different solvents (ethanol, acetone, or none). MATERIALS AND METHODS: Eighteen third molars divided into six groups were ground flat to expose superficial dentin, which was polished to 600-grit. The bonding procedure was initiated using either of two phosphoric acid gels (10% and 37%). Three adhesive systems - Single Bond (SB), Prime & Bond NT (NT), and One Coat Bond (OC) - with different solvents (ethanol, acetone, or none, respectively) were used. After adhesive application, a cylinder of composite resin was built up. After 24 h water storage, each tooth was serially sectioned into thin rectangular sections (or "sticks") parallel to the long axis and with a mean cross-sectional area of 0.4 mm2. microTBS were determined using an Instron universal testing machine. Data were analyzed using two-way ANOVA and Duncan's test. RESULTS: Mean bond strengths ranged from 66.1 MPa for 10%/ H3PO4 and SB to 43.8 MPa for 37% H3PO4 and OC. SB and OC tended to have slightly higher bond strengths when 10% H3PO4 was used. NT with 37% H3PO4 had a significantly higher microTBS (54.6 MPa) than NT with 10% H3PO4 (44.4 MPa). CONCLUSION: Etching dentin with 37% H3PO4 resulted in a significantly higher mean microTBS for the acetone-based adhesive NT. For both the ethanol- and water-based adhesive (SB) and the solvent-free adhesive (OC), acid concentration did not significantly affect bond strength.

Acetone↗

Demineralization resistance and tensile bond strength of four luting agents after acid attack.

Resistance to acid demineralization provided by luting agents adjacent to enamel was evaluated for four different luting agents: composite resin, glass ionomer, polycarboxylate, and zinc phosphate cement. Cement solubility and enamel demineralization after acid attack at pH 3.0 were measured radiographically and calculated using computer-aided design. Tensile bond strength of a miniature crown seated on an accurately prepared preparation was evaluated after acid attack using an Instron instrument. Crown retention after 12 days was greater for the polycarboxylate (2,000 kg/m2) than the zinc phosphate cement (500 kg/m2). Crown retention for the glass ionomer (1,100 kg/m2) and composite resin luting agent (1,400 kg/m2) were similar statistically after 21 days of acid exposure. Cement washouts for zinc phosphate and polycarboxylate were similar, and were greater than either glass ionomer or composite resin luting agent. The amount of demineralization related to cements was, from greatest to least: zinc phosphate, polycarboxylate, composite resin, glass ionomer. Fluoride release was concluded to be initially effective in reducing enamel solubility in spite of cement solubility.

Composite Resins↗

Comparison of in vivo and in vitro demineralized dentin with phosphoric and maleic acid.

This article evaluated possible differences between dentin conditioned in vivo and in vitro with 10 percent maleic acid or with 36 percent phosphoric acid. Semispherical Class V cavities were prepared in vivo and in vitro at the cementum-enamel junction and were divided into four groups. After etching procedures, the in vivo samples were extracted and fixated in 10 percent buffered formaldehyde. Both the in vivo and in vitro samples were then fractured in two parts along their long axis, critical-point dried, and subsequently examined with SEM. Both the acids removed completely the smear layer and demineralized the dentin, leaving a layer of collagenous network. No morphological differences were found between in vivo and in vitro dentin samples.

Acid Etching, Dental↗

Effects of different pH values of citric acid solutions on the calcium and phosphorus contents of human root dentin.

In a group of mandibular incisors, the calcium and phosphorus contents of the cervical, middle, and apical thirds of the roots were determined using an electron microprobe analyzer, before and after treatment with citric acid solutions of different concentrations. The treated surfaces were examined using a scanning electron microscope. The relative calcium and phosphorus loss values obtained from the samples treated with pH 0.8, 1.1, 1.3, 1.5, and 1.7 solutions were significantly different from those obtained in the control group. The demineralizing effect of the pH 0.8 and pH 1.3 solutions was the same, with both of these being less effective than the pH 1.1 solution.

Acid Etching, Dental↗

Clinical evaluation of the use of decalcified freeze-dried bone allograft with guided tissue regeneration in the treatment of molar furcation invasions.

The purpose of this study is to evaluate the potential of decalcified freeze-dried bone allograft (DFDBA) combined with a barrier material in the treatment of human molar furcation defects (experimental) as compared to the barrier technique alone (control). Fifteen pairs of Class II or III furcation invasion defects comprised the study group. Measurements with calibrated periodontal probes were made to determine soft tissue recession, probing depth, and attachment levels. Defects from each pair were randomly selected to be treated with an expanded polytetrafluoroethylene membrane (e-PTFE) and DFDBA or the membrane alone. Additional measurements were made during surgery to determine crestal resorption, and vertical and horizontal open probing attachment. The membrane was removed 4 to 6 weeks post-insertion. Six months post-treatment, each site was surgically reentered and measurements repeated. Following either treatment, recession was minimal with statistically significant improvement in probing depth reduction and clinical attachment level gain favoring the combined technique. Hard tissue changes were comparable for alveolar crestal resorption, however, there was a distinct difference, statistically, for both horizontal and vertical bone repair favoring the use of the demineralized bone graft in combination with the e-PTFE membrane.

Bone Transplantation↗

The effect of ultrasonic irrigation before and after citric acid treatment on collagen fibril exposure: an in vitro SEM study.

The surface characteristics of periodontally diseased human teeth after two treatments were compared both before and after partial demineralization with citric acid. Thirteen teeth were obtained from patients with advanced periodontal disease. Three teeth were selected for control groups and 10 were used for experimental groups. All diseased root surfaces were identified and outlined. The roots were cut longitudinally into two sections. They were then scaled and root planed and the paired sections were separately classified into two control or two experimental groups. Three sections in control group 1 were rinsed by syringe with saline solution. The three sections in control group 2 were treated with ultrasonic irrigation. The 10 sections in experimental group 1 were rinsed by syringe with saline solution before and after citric acid application; the 10 sections in experimental group 2 were irrigated ultrasonically before and after citric acid application. The concentration of the citric acid was 25% (pH 1.62) and the immersion time was 3 minutes. The root samples were examined by scanning electron microscope. A significant amount of grinding debris covered on all the root surfaces in control group 1, whereas smear was removed in control group 2. The features of root surfaces of the two experimental groups differed considerably. All specimens in experimental group 2 exhibited collagen fibrils exposed as a consequence of citric acid etching. On the other hand, the smear layer was not thoroughly removed from the root surface in experimental group 1, which meant that few collagen fibrils were exposed after partial demineralization. From these results, ultrasonic irrigation before and after citric acid application improves exposure of collagen fibrils, which may be desirable for clinical success in periodontal regenerative therapy.

Acid Etching, Dental↗

Citric acid demineralization and subepithelial connective tissue grafts.

BACKGROUND: The present study was designed to evaluate the effect, if any, of citric acid root demineralization in the outcome of subepithelial connective tissue grafts performed to cover localized gingival recessions. METHODS: Thirty-six patients participated, each providing one gingival recession; 19 received citric acid demineralization, while 17 did not. All were treated surgically with subepithelial connective tissue grafts and followed for 6 months. At baseline and 6 months, the following parameters were recorded: plaque index, gingival index, recession height, probing depth, recession width, and amount of keratinized tissue. Data were analyzed statistically to 1) evaluate the results achieved with each procedure individually over time and 2) compare the results obtained with the 2 procedures after 6 months. RESULTS: Results showed significant reductions in recession height after 6 months independently of whether citric acid was applied or not (2.79+/-0.79 versus 2.56+/-0.73). Similarly, recession width was significantly reduced (3.74+/-1.19 versus 3.50 +/-0.73), and the width of keratinized tissue was significantly increased (2.47+/-1.6 versus 2.3+/-1.2). No significant changes in probing depth were found (-0.16+/-0.06 versus -0.13+/-0.81). No significant differences were found when both techniques were compared in any one of the parameters analyzed (all P >0.30). CONCLUSIONS: It is concluded that: 1) the subepithelial connective tissue graft procedure provides a satisfactory solution in the treatment of localized gingival recessions, and 2) citric acid demineralization does not affect the clinical outcome of the surgical technique.

Adolescent↗

Nonsurgical repair of furcal perforations: a literature review.

The important steps in the management of a furcal perforation are immediate action, adequate isolation, debridement, and sealing of the defect. Studies have shown that repair materials or underlying matrix material such as amalgam, Cavit, calcium hydroxide, glass ionomers, hydroxylapatite, tricalcium phosphate, and demineralized freeze-dried bone have not been able to produce consistent results. However, current research on new materials such as mineral trioxide aggregate may advance treatment modalities significantly for furcation repair.

Aluminum Compounds↗