SEARCH · PubMed Health

Results for “Particulate Matter”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources

PubMed2006

Influence of meteorological parameters on particulates and atmospheric pollutants at Taichung harbor sampling site.

Atmospheric aerosol particles and metallic concentrations, ionic species were monitored at the Experimental harbor of Taichung sampling site in this study. This work attempted to characterize metallic elements and ionic species associated with meteorological conditions variation on atmospheric particulate matter in TSP, PM2.5, PM2.5-10. The concentration distribution trend between TSP, PM2.5, PM2.5-10 particle concentration at the TH (Taichung harbor) sampling site were also displayed in this study. Besides, the meteorological conditions variation of metallic elements (Fe, Mg, Cr, Cu, Zn, Mn and Pb) and ions species (Cl(-), NO3 (-), SO4 (2-), NH4+, Mg2+, Ca2+ and Na+) concentrations attached with those particulate were also analyzed in this study. On non-parametric (Spearman) correlation analysis, the results indicated that the meteorological conditions have high correlation at largest particulate concentrations for TSP at TH sampling site in this study. In addition, the temperature and relative humidity of meteorological conditions that played a key role to affect particulate matter (PM) and have higher correlations then other meteorological conditions such as wind speed and atmospheric pressure. The parameter temperature and relative humidity also have high correlations with atmospheric pollutants compared with those of the other meteorological variables (wind speed, atmospheric pressure and prevalent wind direction). In addition, relative statistical equations between pollutants and meteorological variables were also characterized in this study.

Air Pollutants↗

PubMed1999

Binding assays in heterogeneous media using a flow injection system with an expanded micro-bed adsorption column.

Competitive binding assays have been performed in flow injection systems. To further increase the versatility of the system, and to enable it to deal with samples containing particulate matter, the adsorption step was designed as an expanded bed column. Immunochemical quantification of human serum albumin was chosen as a model system to use for the development of the technology. A competitive ELISA was set up using peroxidase labelled HSA as competing ligand. The introduction of the expanded bed immunosorption column made the system tolerant to samples containing suspended particulate matter. The analytical outcome is very similar to that from the packed bed system even though more time is required for each assay cycle. The capability of the system was tested by addition of increasing amounts of yeast cells. The results clearly indicate that the system is suitable e.g. for process monitoring of fermentations.

Adsorption↗

PubMed2002

Impact of particulate air pollutants on allergic diseases, allergic skin reactivity and lung function.

Elevated levels of particulate matter can exacerbate existing asthma and atopy, while evidence that it can promote the induction of atopy and asthma is limited. A cross sectional study was taken to compare the prevalence of eye, nose, ear and airway allergic symptoms, allergic skin sensitivity and lung function in 290 high school students with a history of high 24 hour average exposure to particulate matter less than 10 microm in diameter (PM10) = 170 microg/m3 versus low PM10 of 36 microg/m3 in central Bangkok. Multivariate analysis revealed an increased risk of eye and airway symptoms in groups exposed to higher PM10 levels (p = 0.003, and 0.05, respectively). Positive skin prick tests and a history of having a lawn at home were associated with nasal symptoms (p = 0.008 and 0.04, respectively). Mean FEF(25-75%) (forced expiratory flow that occurs during the middle 50% of the forced expiratory effort) was significantly lower in those who were exposed to higher PM10 levels (3.89 +/- 1 vs 4.42 +/- 0.9 l/sec, p < 0.001). A significant increase in days of school absence and medical expenses was associated with high PM10 exposure. It is concluded that chronic exposure to high PM 10 levels was significantly associated with increased prevalence of eye and airway symptoms and a decrement of FEF(25-75%) resulting in increase of school absence and medical expense.

Adolescent↗

PubMedDate not supplied

In vitro biomonitoring in polar extracts of solid phase matrices reveals the presence of unknown compounds with estrogenic activity.

Determination of estrogenic activity has so far mainly concentrated on the assessment of compounds in surface water and effluent. This study is one of the first to biomonitor (xeno-)estrogens in sediment, suspended particulate matter and aquatic organisms. The relatively polar acetone extracts from these solid phase matrices do not contain the well-known estrogenic compounds such as hormones, alkylphenols and phthalates. An in vitro 'estrogen receptor-mediated chemical activated luciferase gene expression' (ER-CALUX) assay was applied to samples from various locations in the Netherlands. Estrogenic activity measured in polar fractions of particulate matter and sediment extracts ranged from below detection limit to up to 4.5 pmol estradiol equivalents (EEQ)/g dry weight. Estrogenic activity in freshwater river sediments was up to five times higher compared to sediments from large lakes and coastal locations. Tissue extracts EEQs were determined in bream (Abramis brama), flounder (Platichthysflesus), freshwater mussels (Dreissena polymorpha) and marine mussels (Mytilus edulis). The highest biota EEQ levels were found in the freshwater zebra mussel (30 pmol EEQ/g lipid). One sample site showed greatly elevated EEQs in sediment and biota, which correlated with effects found in the wild populations of bream. The EEQ activity of the unknown compounds in the polar fraction mostly was much higher than the calculated EEQ levels based on known estrogens in the non-polar fraction (previously published data).

Animals↗

PubMed1982

Corrosion of gold alloys and titanium in artificial saliva.

Two types of gold alloys and one type of pure titanium have been submitted to corrosion in artificial saliva for periods of up to about 2 months. The release of copper, gold or silver from the gold alloys as well as titanium from the titanium matrix was measured with nuclear tracer technique. The physical/chemical state of the corrosion products of gold alloys referring to the ionic state or presence in particulate form has been examined retaining the particulate matter on a glass filter. Copper was observed to be mainly present in the ionic state. Considerable amounts of gold were observed to be retained on the glass filter explained by the presence of gold in particular form or as a component of a dispersed colloidal phase. The estimation of the release of titanium was registered by the tracer nuclide 46Sc assuming particulate matter to be deteriorated from the titanium surface.

Chemical Phenomena↗

PubMed1995

Measurement of acidic aerosol species in eastern Europe: implications for air pollution epidemiology.

A large number of studies have indicated associations between particulate air pollution and adverse health outcomes. Wintertime air pollution in particular has been associated with increased mortality. Identification of causal constituents of inhalable particulate matter has been elusive, although one candidate has been the acidity of the aerosol. Here we report measurements of acidic aerosol species made for approximately 1.5 years in Erfurt, Germany, and Sokolov, Czech Republic. In both locations, the burning of high-sulfur coal is the primary source of ambient air pollution. Twenty-four-hour average measurements were made for PM10, [particulate matter with an aerodynamic diameter (da) < or = 10 microns], as well as fine particle (da < 2.5 microns) H+ and SO4(2-) for the entire study. Additionally, separate day and night measurements of fine particle H+, SO4(2-), NO3-, and NH4+ and the gases, SO2, HNO3, HONO, and NH3 were collected with an annular denuder/filter pack system over a 7-month (late winter-summer) period with additional measurements during pollution episodes the following winter. At both sites, 24-hr SO2 (mean concentrations of 52 micrograms/m3, with peak levels of > 585 micrograms/m3) and PM10 (mean concentration 60 micrograms m3) concentrations were quite high. However, aerosol SO4(2-) concentrations (mean concentration of approximately 10 micrograms/m3) were not as great as expected given the high SO2 concentrations, and acidity was very low (mean concentration of < 1 microgram/m3, with peak levels of only 7 micrograms/m3). Low acidity is likely to be the result of NH3 neutralization and slow conversion of SO2 to SO4(2-).(ABSTRACT TRUNCATED AT 250 WORDS)

Acids↗

PubMedDate not supplied

[Effects of air pollution on human health and their importance in Mexico City].

The impact of air pollution on human health is a complicated problem. In this review, we describe the main health effects of exposure to ozone, carbon monoxide, sulfur dioxide, nitrogen dioxide, lead and particulate matter. Geographical characteristics of the metropolitan area of Mexico City that favor pollutant persistence with adverse effects on the population are described; the use of the Indice Metropolitano de la Calidad del Aire (IMECA), current norms, and present programs to diminish this problem are discussed. Evidence shows that through these actions, air quality has improved. However, some pollutants such as ozone and particulate matter, still exceed the standard. To further improve air quality in the city, existing programs should continue and multidisciplinary research, both basic and applied, is required.

Air Pollutants↗

PubMed2006

Field survey of trans-boundary air pollution with high time resolution at coastal sites on the Sea of Japan during winter in Japan.

An intensive field survey, with 6-h measurement intervals, of concentrations of chemical species in particulate matter and gaseous compounds was carried out at coastal sites on the Sea of Japan during winter. The concentration variation of SO(2)(g) and HNO(3)(g) were well correlated, whereas the NH(3)(g) concentration variation had no correlation with those of SO(2)(g) and HNO(3)(g). The NH(4) (+) (p)/non-sea-salt- (nss-)SO(4) (2 -)(p) ratio in particulate matter was mainly affected by the location of the sampling site. One or more concentration peaks of nss-Ca(2 +) for survey period were observed. Backward trajectories analyses for the highest nss-Ca(2 +) concentration peaks showed some inconsistency in pathways. We consider that insufficient mixing of the atmosphere and/or insufficient time for the transported air pollutants to react with those discharged locally are the most likely explanations for the discrepancies between the measured products [HNO(3)][NH(3)] and the calculated values.

Air Pollutants↗

PubMed2004

A screening-level assessment of the health risks of chronic smoke exposure for wildland firefighters.

A screening health risk assessment was performed to assess the upper-bound risks of cancer and noncancer adverse health effects among wildland firefighters performing wildfire suppression and prescribed burn management. Of the hundreds of chemicals in wildland fire smoke, we identified 15 substances of potential concern from the standpoints of concentration and toxicology; these included aldehydes, polycyclic aromatic hydrocarbons, carbon monoxide, benzene, and respirable particulate matter. Data defining daily exposures to smoke at prescribed burns and wildfires, potential days of exposure in a year, and career lengths were used to estimate average and reasonable maximum career inhalation exposures to these substances. Of the 15 substances in smoke that were evaluated, only benzene and formaldehyde posed a cancer risk greater than 1 per million, while only acrolein and respirable particulate matter exposures resulted in hazard indices greater than 1.0. The estimated upper-bound cancer risks ranged from 1.4 to 220 excess cancers per million, and noncancer hazard indices ranged from 9 to 360, depending on the exposure group. These values only indicate the likelihood of adverse health effects, not whether they will or will not occur. The risk assessment process narrows the field of substances that deserve further assessment, and the hazards identified by risk assessment generally agree with those identified as a concern in occupational exposure assessments.

Benzene↗

PubMed2002

Source extraction information from air quality data monitored in an Argentinean steel mill.

A statistical analysis of a series of ambient air concentrations of suspended particulate matter (SPM) and NO2 is presented. Measurements were taken at four sites that belong to an Argentinean steel mill and in another site located in its vicinity. The air pollutants were measured during a three-week exploratory sampling. The monitoring sites were selected on the basis of relevant characteristics of the emission sources and the corresponding climatological statistics of the last decade. Suspended particulate matter with aerodynamic diameter of less than 10 microm (PM10) and NO2 were continuously measured at only one site, while 1-hr samples of NO2 and 24-hr samples of total SPM and SO2 were collected at the other sites. The registered concentrations show that SPM was the pollutant of major concern. A first estimate about the nature of the contribution of the different sources of particles and NO2 present in the area was obtained through the statistical analysis of measured concentration data coupled with prevalent meteorological variables.

Air Pollutants, Occupational↗

PubMed2005

Clearing the air: a model for investigating indoor air quality in Texas schools.

This pilot project focused on the assessment of indoor air quality at a local high school in Galveston, Texas, using methods based on guidelines for the U.S. Environmental Protection Agency's Indoor Air Quality Tools for Schools program. Tools for Schools, developed for evaluating and ensuring acceptable air quality for schools, takes a low-cost, minimal-involvement, primarily educational approach. The authors also compared the findings from this approach with the results of an air-sampling program. The overall goal was to determine if use of Tools for Schools was sufficient to identify conditions with the potential to cause adverse health effects. The primary objectives were to 1) establish an indoor air quality committee for the school to implement Tools for Schools assessments and management strategies, 2) collect air quality data in high-risk areas identified within the school by the indoor air quality committee, 3) collect outdoor air quality data at or in close proximity to the school, and 4) develop methods and instruments for assessing environmental risks associated with daily school attendance. Data were gathered on levels of formaldehyde and other volatile organic compounds (VOCs), ozone, particulate matter (PM10), mold, relative humidity, and temperature. Data values for each sampled pollutant were compared with federal standards, recommended values established by the American Conference of Governmental Industrial Hygienists for non-industrial populations, and effects screening levels developed by the Texas Commission on Environmental Quality. Levels of all VOCs except formaldehyde were found to be well within guidelines, as were ozone and particulate-matter levels. Mold, however, was widespread, including both common species and species associated with allergy and asthma, such as Aspergillus and Alternaria. In general, Tools for Schools provides an excellent foundation for a school indoor air quality program, although the authors did find it necessary to streamline data collection and did find that mold with the potential for adverse health effects was present, albeit not visible in some areas.

Air Pollutants↗

PubMed2001

Exhaust emissions from engines of the Detroit Diesel Corporation in transit buses: a decade of trends.

In the U.S.A., exhaust emissions from city buses fueled by diesel are not characterized well because current emission standards require engine tests rather than tests of whole vehicles. Two transportable chassis dynamometer laboratories developed and operated by West Virginia University (WVU) have been used extensively to gather realistic emission data from heavy-duty vehicles, including buses, tested in simulated driving conditions. A subset of these data has been utilized for a comprehensive introspection into the trends of regulated emissions from transit buses over the last 7 years, which has been prompted by continuously tightening restrictions on one hand, along with remarkable technological progress, on the other hand. Two widely used models of diesel engines manufactured by the Detroit Diesel Corporation (DDC) have been selected as a case-study for such an overview, based on full-scale, on-site testing of actual city buses, driven in accordance with the SAE J1376 standard of a Commercial Business District (CBD) cycle. The results provide solid, quantitative evidence that most regulated emissions from engines produced by DDC have declined over the years, especially with the transition from the 6V-92TA to the Series 50 models. This improvement is remarkable mainly for the emissions of particulate matter (PM), that are lower by over 70%, on average, for the Series 50 engines, though the emissions of nitrogen oxides (NOx) exhibit a reversed trend, showing a degradation of about 6%, on average, with the transition from 6V-92TA to the Series 50 engines. The expected trend of decreasing emission levels with the model year of the engine is clear and consistent for particulate matter (PM), hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOx), starting with the 1990 models, although it is not conclusive for carbon dioxide (CO2) emissions.

Air Pollution↗

PubMed1999

Use of acridine orange to evaluate chromatin integrity of human spermatozoa in different groups of infertile men.

To study the sperm chromatin compactness various methods, such as acidic aniline blue or acridine orange staining, have been applied. Due to its metachromatic properties, acridine orange dye fluoresces green with double- and red with single-stranded DNA. Samples (n = 181) were evaluated and grouped as follows: group I, normal recently fertile; group II, male having female partner with repeated early pregnancy loss; group III, male with varicocele; and group IV in-vitro fertilization and intrauterine insemination failures. Routine semen analyses were carried out in all the cases. Amorphous particulate matter as observed under phase contrast microscope was graded on the scale of nil to +4. Fixed smears were stained with an aqueous solution of acridine orange and viewed under a fluorescence microscope. Two hundred cells were counted and the percentage of fluorescence calculated. Groups II, III and IV exhibited significantly low green fluorescence compared with the control group. The study also indicates that increased amorphous particulate matter (indicating infection) might be one of the contributing factors to lower acridine orange stainability. Thus acridine orange staining can be used to evaluate the integrity of the nucleus, disorders of which can cause unexplained infertility or lower fertilization potential that may go undetected by routine analysis.

Acridine Orange↗

PubMed2001

"Optimally spaced" excimer laser coronary catheters: performance analysis.

BACKGROUND: Excimer laser angioplasty is a percutaneous treatment modality for management of selected patients with severe obstructive coronary artery disease. This technology entails application of multifiber catheters that vaporize intra-arterial plaque and thrombus with the 308-nm wavelength light. A coronary laser catheter ("OS") with increased space between its optic fibers (90 microns) at the tip was recently developed. The previous design used a closely packed fiber bundle ("CP") with a smaller space between the fibers (77 microns). We sought to determine the ablation characteristics of the new, OS design. METHODS: Experiments testing the new catheter and comparing it to the existing catheter included: (1) measurement of the laser output beam sizes and divergences; (2) evaluation of particulate matter generation during ablation of atherosclerotic tissue; (3) measurement of ablation hole sizes and tissue penetration rates; (4) histopathologic examination of laser-induced in vivo vessel wall injury. RESULTS: The new OS catheters produce a wider beam with higher divergence than the traditional CP catheters (6.7 degrees vs. 4.7 degrees, respectively). Testing two different levels of energy revealed the generation of a reduced number of particulate matter and shallower penetration depth with the OS catheter compared with traditional CP catheters. The OS catheters created a larger diameter of ablated hole than the CP catheters (for 2.0-mm catheters: 2.7 mm2 vs. 1.5 mm2, respectively, p = 0.01). Lasing with the OS catheters with slow advancement rates (0.2-0.5 mm/sec) resulted in creation of significantly larger-diameter holes than those produced at higher speeds (1-3 mm/sec). The in vivo vessel wall injury scores were similar among the two types of catheters tested. CONCLUSIONS: A new design of spaced optical fibers for coronary laser catheters provides increased tissue ablation in comparison to the traditional closely packed fibers catheter. Slow advancement rates during lasing with the new OS catheter are crucial for achievement of adequate plaque debulking.

Absorption↗

PubMed2006

Lead isotope ratios in urban road runoff.

Lead isotopic analyses of road runoff and airborne particulate matter have been carried out to elucidate sources of lead pollution at urban and suburban sites. While lead is often observed in road runoff in suspended form, suspended particle size had no relation to the lead isotopic distribution, as a result of comparison between runoff samples with total suspended solids and those with minute particles passed through a 75 microm sieve. Lead isotope ratios in airborne particulate matter in urban areas fell within a wider range than those in road runoff. Since there was little difference of the ratios between a heavy traffic-flow site and residential sites, airborne lead derived from vehicle exhaust was found to make little contribution to the contamination of road runoff. On the other hand, the ratios in road runoff at a suburban site showed the same range as those at an urban site. Lead in road runoff was therefore suggested to be produced on site by traffic related substances, such as tire wear, other than vehicle exhaust.

Air Pollutants↗

PubMed2004

Quantitative surface analysis of urban airborne particles by x-ray photoelectron spectroscopy.

X-ray photoelectron spectroscopy (XPS) has been used to determine the species present in urban particulate matter collected in the city of Cagliari (Sardinia, Italy) and in an industrial area near to Cagliari. Samples were collected on both cellulose and glass fiber filters. Elemental identification, chemical state and quantitative analyses of the examined samples indicated the presence of Na3AlF6, SiO2 and Al2O3 in the ratio 2:2:5, carbon and oxygen being the major components. The results obtained on NIST SRM 1648 urban particulate matter, before and after grinding, are also presented.

Air Pollutants↗

PubMed2004

Metal fractionation of atmospheric aerosols via sequential chemical extraction: a review.

This review surveys schemes used to sequentially chemically fractionate metals and metalloids present in airborne particulate matter. It focuses mainly on sequential chemical fractionation schemes published over the last 15 years. These schemes have been classified into five main categories: (1) based on Tessier's procedure, (2) based on Chester's procedure, (3) based on Zatka's procedure, (4) based on BCR procedure, and (5) other procedures. The operational characteristics as well as the state of the art in metal fractionation of airborne particulate matter, fly ashes and workroom aerosols, in terms of applications, optimizations and innovations, are also described. Many references to other works in this area are provided.

Journal Article↗

PubMedDate not supplied

Acute asthma exacerbations and air pollutants in children living in Belfast, Northern Ireland.

The incidence of childhood asthma, a common condition, is on the rise worldwide. Despite reductions in the emission of urban smoke, traffic pollution is now a major worldwide problem. Belfast, Northern Ireland, is an old industrial city with major pollution problems. In this study, the authors investigated the rates of acute asthma admissions to Belfast's major children's emergency department. The admissions were studied, relative to day-to-day fluctuations in thoracic particulate matter, sulfur dioxide, nitrogen dioxide, nitric oxide, oxides of nitrogen, ozone, carbon monoxide, benzene, temperature, and rainfall. Daily admissions for acute asthma at the emergency department of the Royal Belfast Hospital and average daily pollution were recorded for the 3-yr period between January 1, 1993, and December 31, 1995. The authors used Poisson regression to assess independent association(s). Individually, small associations were seen for thoracic particulate matter (relative risk = 1.10), sulfur dioxide (relative risk = 1.09), nitrogen dioxide (relative risk = 1.11), nitric oxide (relative risk = 1.07), oxides of nitrogen (relative risk = 1.10), carbon monoxide (relative risk = 1.07), and benzene (1.14); no associations were noted between meteorological factors (temperature and rainfall) or ozone and asthma emergency-department admissions. The authors adjusted for the aforementioned parameters, and benzene level was the only variable associated independently with asthma emergency-department admissions in children. Benzene may be a more reliable method of measuring exposure to vehicle exhaust emissions than measurements of other pollutants.

Acute Disease↗