SEARCH · PubMed Health

Results for “surface modification”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87Linked to original sources

PubMed2005

Effects of particle size and surface coating on cellular uptake of polymeric nanoparticles for oral delivery of anticancer drugs.

This study evaluated cellular uptake of polymeric nanoparticles by using Caco-2 cells, a human colon adenocarcinoma cell line, as an in vitro model with the aim to apply nanoparticles of biodegradable polymers for oral chemotherapy. The feasibility was demonstrated by showing the localization and quantification of the cell uptake of fluorescent polystyrene nanoparticles of standard size and poly(lactic-co-glycolic acid) (PLGA) nanoparticles coated with polyvinyl alcohol (PVA) or vitamin E TPGS. Coumarin-6 loaded PLGA nanoparticles were prepared by a modified solvent extraction/evaporation method and characterized by laser light scattering for size and size distribution, scanning electron microscopy (SEM) for surface morphology, zeta-potential for surface charge, and spectrofluorometry for fluorescent molecule release from the nanoparticles. The effects of particle size and particle surface coating on the cellular uptake of the nanoparticles were quantified by spectrofluorometric measurement. Cellular uptake of vitamin E TPGS-coated PLGA nanoparticles showed 1.4 folds higher than that of PVA-coated PLGA nanoparticles and 4-6 folds higher than that of nude polystyrene nanoparticles. Images of confocal laser scanning microscopy, cryo-SEM and transmission electron microscopy clearly evidenced the internalization of nanoparticles by the Caco-2 cells, showing that surface modification of PLGA nanoparticles with vitamin E TPGS notably improved the cellular uptake. It is highly feasible for nanoparticles of biodegradable polymers to be applied to promote oral chemotherapy.

Administration, Oral↗

PubMed2005

Anterior cruciate ligament regeneration using braided biodegradable scaffolds: in vitro optimization studies.

The anterior cruciate ligament (ACL) is the most commonly injured intra-articular ligament of the knee, and limitations in existing reconstruction grafts have prompted an interest in tissue engineered solutions. Previously, we reported on a tissue-engineered ACL scaffold fabricated using a novel, three-dimensional braiding technology. A critical factor in determining cellular response to such a graft is material selection. The objective of this in vitro study was to optimize the braided scaffold, focusing on material composition and the identification of an appropriate polymer. The selection criteria are based on cellular response, construct degradation, and the associated mechanical properties. Three compositions of poly-alpha-hydroxyester fibers, namely polyglycolic acid (PGA), poly-L-lactic acid (PLLA), and polylactic-co-glycolic acid 82:18 (PLAGA) were examined. The effects of polymer composition on scaffold mechanical properties and degradation were evaluated in physiologically relevant solutions. Prior to culturing with primary rabbit ACL cells, scaffolds were pre-coated with fibronectin (Fn, PGA-Fn, PLAGA-Fn, PLLA-Fn), an important protein which is upregulated during ligament healing. Cell attachment and growth were examined as a function of time and polymer composition. While PGA scaffolds measured the highest tensile strength followed by PLLA and PLAGA, its rapid degradation in vitro resulted in matrix disruption and cell death over time. PLLA-based scaffolds maintained their structural integrity and exhibited superior mechanical properties over time. The response of ACL cells was found to be dependent on polymer composition, with the highest cell number measured on PLLA-Fn scaffolds. Surface modification of polymer scaffolds with Fn improved cell attachment efficiency and effected the long-term matrix production by ACL cells on PLLA and PLAGA scaffolds. Therefore based on the overall cellular response and its temporal mechanical and degradation properties in vitro, the PLLA braided scaffold pre-coated with Fn was found to be the most suitable substrate for ACL tissue engineering.

Absorbable Implants↗

PubMed2005

Construction of anti-adhesive and antibacterial multilayer films via layer-by-layer assembly of heparin and chitosan.

Chitosan as an antibacterial agent and heparin as an anti-adhesive agent were alternatively deposited onto aminolyzed poly(ethylene terephthalate) (PET) films to construct anti-adhesive and antibacterial multilayer films. The contact-angle and UV data verified the progressive buildup of the multilayer film by alternate deposition of the polyelectrolytes. The properties of multilayer films were investigated by contact angle, atomic force microscopy (AFM), lateral force microscopy (LFM) and UV spectra. The results of initial adhesion of Escherichia coli (E. coli) on PET substrates showed that the number of E. coli adhered onto the control PET was in a much greater extent than onto the chitosan/heparin multilayer films, and the number of adhesive bacteria decreased with a decrease in assembly pH. The in vitro antibacterial test indicated that a multilayer of chitosan/heparin could kill the bacteria effectively. The number of viable bacteria decreased by 7% after 7 h in contact with the control PET films, but by 46-68% for the multilayer-modified PET films. Only 3-8% of the cells were viable for the multilayer-modified PET films after 24h. It is interesting to find the assembly pH has a remarkable effect on the antibacterial property of the multilayer. The number of viable bacteria on the multilayer assembled at pH = 3.8, 2.9 and 6.0 decreased by 68%, 58% and 46%, respectively. Such an easy processing and shape-independent method to prepare an anti-adhesive and antibacterial surface may have good potential for surface modification of cardiovascular devices.

Anti-Bacterial Agents↗

PubMed2005

Bone tissue engineering evaluation based on rat calvaria stromal cells cultured on modified PLGA scaffolds.

Using natural materials to coat the scaffolds used for tissue-engineered bone-repair techniques is expected to increase osteoblast adhesion to the scaffold and to express normal physiological function. To test this hypothesis, we therefore modified poly(DL-lactic-co-glycolic acid) (PLGA) substrate by coating it with natural biomaterial solutions of collagen, chitosan, or N-succinyl-chitosan, and then used these three combinations as scaffolds to evaluate their effects on osteoblast attachment, proliferation, and differentiation. The results demonstrated that the pore size of scaffolds ranging from 125-500 microm did not affect the osteoblast phenotype; however, the surface modification of the scaffolds coated with these natural biomaterials did. Collagen increased cell attachment and proliferation, but chitosan and N-succinyl-chitosan decreased them. Chitosan and N-succinyl-chitosan increased differentiation, but collagen decreased it. These results provide us a new strategy for modifying microenvironments to increase osteoblast adhesion, proliferation, and differentiation on PLGA scaffolds, a strategy that might be useful for tissue regeneration.

Animals↗

PubMed2006

The use of poly(l-lactide) and RGD modified microspheres as cell carriers in a flow intermittency bioreactor for tissue engineering cartilage.

The use of biodegradable microcarriers as initial supports for tissue engineering has been demonstrated to be advantageous for maintaining a differentiated cell phenotype; the high surface area also allows rapid cell expansion. Poly l-lactide (PLLA) is a significant member of a group of polymers regarded as bioresorbable and has been widely used for manufacturing 3D scaffolds for tissue engineering. In this study, the hypothesis that PLLA microspheres could be surface modified using RGD peptide sequences to improve the cell adhesion and function of those cells in contact with PLLA was tested. Using this type of approach it may be possible to generate larger structures that contain a high cell number relative to the amount of polymer, whilst remaining free from mass transport limitations. PLLA microspheres were prepared using an oil-in-water solvent-evaporation technique and then an RGD-motif was incorporated onto the microspheres surface by conjugation to improve cell attachment and function. Both PLLA and GRGDSPK modified PLLA microspheres were used as cell microcarriers for chondrocytes cultured in a flow intermittency bioreactor. At the same time, the degradation of the microspheres has been studied after 7, 14, 21, 28, 35, 49 and 56 days. The molecular weight of the PLLA microspheres was determined by Gel Permeation Chromatography. The morphology was assessed by scanning electron microscopy, and the thermal properties determined by Differential Scanning Calorimetry. It was demonstrated that the RGD modified and pure PLLA microspheres degraded gradually at a steady rate over the experimental period, which would provide a controlled degradation profile, both could serve as cell microcarriers because of their thermal and mechanical stabilities. The microspheres with RGD surface modification enhanced cell adhesion and increased the cell numbers in the microspheres aggregates.

Bioreactors↗

PubMed2006

Stem cell-based tissue engineering with silk biomaterials.

Silks are naturally occurring polymers that have been used clinically as sutures for centuries. When naturally extruded from insects or worms, silk is composed of a filament core protein, termed fibroin, and a glue-like coating consisting of sericin proteins. In recent years, silk fibroin has been increasingly studied for new biomedical applications due to the biocompatibility, slow degradability and remarkable mechanical properties of the material. In addition, the ability to now control molecular structure and morphology through versatile processability and surface modification options have expanded the utility for this protein in a range of biomaterial and tissue-engineering applications. Silk fibroin in various formats (films, fibers, nets, meshes, membranes, yarns, and sponges) has been shown to support stem cell adhesion, proliferation, and differentiation in vitro and promote tissue repair in vivo. In particular, stem cell-based tissue engineering using 3D silk fibroin scaffolds has expanded the use of silk-based biomaterials as promising scaffolds for engineering a range of skeletal tissues like bone, ligament, and cartilage, as well as connective tissues like skin. To date fibroin from Bombyx mori silkworm has been the dominant source for silk-based biomaterials studied. However, silk fibroins from spiders and those formed via genetic engineering or the modification of native silk fibroin sequence chemistries are beginning to provide new options to further expand the utility of silk fibroin-based materials for medical applications.

Animals↗

PubMed2006

Manipulation and extraction of genomic DNA from cell lysate by functionalized magnetic particles for lab on a chip applications.

A novel approach for extracting living cells' genomic DNA materials utilizing functionalized magnetic particles (MPs) is reported in this investigation. This strategy is amenable to handle bio-samples in a miniaturized environment and it offers a possibility to separate and purify DNA from other cell lysate mixtures "on-chip", which is known to be a bottle-neck step in an integrated micro-total-analysis-system (muTAS). "Species-specific" genomic DNA of interest is captured by the MPs based on the hybridization interaction between the biotinylated probes modified MPs and a complementary region of the targeted genome. The genome DNA anchored on the particles can be separated from the rest of cellular mixtures by a simple buffer washing upon the exertion of external magnetic force. Surface modifications of MPs and hybridization conditions affecting the genome capturing efficiency are investigated. Extraction of genomic DNA from E. coli is demonstrated in a silicon/glass-based micro-reactor patterned with a platinum heater and sensors. On-chip extraction and manipulation of genomic DNAs illustrated in this study is a step forward toward a total integrated bioanalytical microsystem for crude cells/sample analysis.

Biosensing Techniques↗

PubMed2006

Bead-based microfluidic immunoassays: the next generation.

Microfluidic devices possess many advantages like high throughput, short analysis time, small volume and high sensitivity that fulfill all the important criteria of an immunoassay used for clinical diagnoses, environmental analyses and biochemical studies. These devices can be made from a few different materials, with polymers presently emerging as the most popular choice. Other than being optically clear, non-toxic and cheap, polymers can also be easily fabricated with a variety of techniques. In addition, there are many polymer surface modification methods available to improve the efficiency of these devices. Unfortunately, current microfluidic immunoassays have limited multiplexing capability compared to flow cytometric assays. Flow cytometry employ the use of encoded microbeads in contrast with normal or paramagnetic microbeads applied in current microfluidic devices. The encoded microbead is the key in providing multiplexing capability to the assay by allowing multi-analyte analysis. Using several unique sets of code, different analytes can be detected in a single assay by tracing the identity of individual beads. The same principle could be applied to microfluidic immunoassays in order to retain all the advantages of a fluidic device and significantly improve multiplexing capability.

Animals↗

PubMed2005

Electroosmotic flow in poly(dimethylsiloxane) microchannels.

This paper reports on the study of electroosmotic flow (EOF) in poly(dimethylsiloxane) (PDMS) microchannels on the basis of indirect amperometric detection method. Gradual increase of EOF rate in freshly prepared PDMS microchannels was observed with the running buffer of phosphate buffer solution (PBS). With the same concentration (10 mM) of PBS containing different cations and the same pH value (7.0) and, the time of the stable EOF in PDMS microchannels under the applied separation voltage of 1000 V was 49.8 s (Li+ -PBS), 57.1 s (Na+ -PBS), 91 s (K+ -PBS), respectively. Meanwhile, the different adsorption of cations (Li+, Na+ and K+) on hydrophobic PDMS wall was observed through their separation in PDMS microchannels. Such experimental results demonstrated that the EOF in PDMS microchannels came from the cations and anions adsorbed on PDMS wall. This study would not only help us understand the surface state of PDMS, but also provide a useful guidance for establishing the effective surface modification methods in PDMS microchip CE.

Dimethylpolysiloxanes↗

PubMed2006

Fully automated liquid chromatography-mass spectrometry determination of 17beta-estradiol in river water.

Surface modified molecularly imprinted polymers (SM-MIPs) for 17beta-estradiol (E2), utilizing 6-ketoecradiol as a pseudo template were prepared. MIPs for E2 were synthesized using 4-vinyl pyridine and ethylene dimethacrylate as a functional monomer and cross-linking agent, respectively. MIPs selectively retained E2 and provided excellent chromatographic resolution from interfering compounds inherent in river water sample matrices. Therefore, freshly prepared MIPs were applied to quantitative mass spectrometric (negative electrospray ionization mode) detection of low levels of E2 in river water sample. In order to pre-concentrate the target compound for HPLC analysis, column switching was coupled with a pretreatment column packed with the MIPs. The repeatability of actual determinations of river water sample, in which background E2 was not detected, spiked with 50 ng/L of E2 was 2.2% RSD with a detection limit and qualification limit of 1.8 and 5.4 ng/L, respectively. Surface modification of MIP particlefs packed in the pretreatment column provided selective affinity and on-line concentration of low levels of E2 while simultaneously eliminating sample matrix interference, resulting in a significant increase in sensitivity and reproducibility for liquid chromatography-mass spectrometry analysis of E2 in river water sample.

Chromatography, High Pressure Liquid↗

PubMed2006

Simultaneous determination of bisphenol A and its halogenated derivatives in river water by combination of isotope imprinting and liquid chromatography-mass spectrometry.

A restricted access media-molecularly imprinted polymer (RAM-MIP) for [2H16]bisphenol A (BPA-d16) was prepared by a multi-step swelling and polymerization method using 4-vinylpyridine as a functional monomer and ethylene glycol dimethacrylate as a cross-linker, followed by hydrophilic surface modification using glycerol dimethacrylate and glycerol monomethacrylate as hydrophilic monomers. The obtained RAM-MIP showed excellent molecular recognition abilities for BPA and BPA-d6 as well as BPA-d16 used as the template molecule, and good ones for tetrachlorobisphenol A (Cl4-BPA) and tetrabromobisphenol A (Br4-BPA). Next, the RAM-MIP was utilized for selective on-line pretreatment and enrichment of BPA, Cl4-BPA and Br4-BPA in a river water sample, followed by their separation and determination by LC-MS. The calibration graphs of BPA, Cl4-BPA and Br4-BPA, constructed using BPA-d6 as an internal standard, showed good linearity in the range of 12.5-200 pg/mL (r > 0.999) with a 2-mL injection of a river water sample. The inter-day precision data for the assay of BPA, Cl4-BPA and Br4-BPA at 25 pg/mL were 1.08, 3.67 and 1.58%, respectively. Furthermore, this method was successfully applied for the simultaneous determination of BPA and its halogenated derivatives in river water.

Benzhydryl Compounds↗

PubMed2006

Molecularly imprinted polymers for triazine herbicides prepared by multi-step swelling and polymerization method. Their application to the determination of methylthiotriazine herbicides in river water.

Uniformly-sized, molecularly imprinted polymers (MIPs) for atrazine, ametryn and irgarol were prepared by a multi-step swelling and polymerization method using ethylene glycol dimethacrylate as a cross-linker and methacrylic acid (MAA), 2-(trifluoromethyl) acrylic acid (TFMAA) or 4-vinylpyridine either as a functional monomer or not. The MIP for atrazine prepared using MAA showed good molecular recognition abilities for chlorotriazine herbicides, while the MIPs for ametryn and irgarol prepared using TFMAA showed excellent molecular recognition abilities for methylthiotriazine herbicides. A restricted access media-molecularly imprinted polymer (RAM-MIP) for irgarol was prepared followed by in situ hydrophilic surface modification using glycerol dimethacrylate and glycerol monomethacrylate as hydrophilic monomers. The RAM-MIP was applied to selective pretreatment and enrichment of methylthiotriazine herbicides, simetryn, ametryn and prometryn, in river water, followed by their separation and UV detection via column-switching HPLC. The calibration graphs of these compounds showed good linearity in the range of 50-500 pg/mL (r > 0.999) with a 100 mL loading of a river water sample. The quantitation limits of simetryn, ametryn and prometryn were 50 pg/mL, and the detection limits were 25 pg/mL. The recoveries of simetryn, ametryn and prometryn at 50 pg/mL were 101%, 95.6% and 95.1%, respectively. This method was successfully applied for the simultaneous determination of simetryn, ametryn and prometryn in river water.

Herbicides↗

PubMed2006

Resin characterization by electro-acoustic measurements.

The electro-acoustic effects, namely the ion vibration potential (IVP) and the colloidal vibration current (CVI), colloidal vibration potential (CVP) first described by P. Debye [P. Debye, J. Chem. Phys. 1 (1933) 13], are a result of charge separation of bound or free ions at different degrees by ultrasonic waves. Today commercial instruments are available to investigate liquid homogeneous and heterogeneous systems. In the present paper the application of this technique for the characterization of salts, protein solutions and resins for biochromatography is shown and valuable information about resins can be derived in a short time. Various resins were investigated with the following results: (1) the CVI magnitude is dependent of several parameters (such as particle size distribution, volume fraction, density difference); (2) the CVI is influenced by the surface modification of the resins. Polymeric modifications decrease the value of CVI. The CVI is generally lower for high capacity resins; (3) the measurement of the electro-acoustic effects can be used to detect small changes in resins. The CVI is dependent of the amount of adsorbed protein in "native" and denatured state.

Acoustics↗

PubMed2005

Functionality and stability of heparin immobilized onto poly(dimethylsiloxane).

Poly(dimethylsiloxane) (PDMS) has become an attractive material when working in the field of microfluidics, mainly because of the rapid prototyping process it involves. The increased surface volume ratio in microchannels makes the interaction between sample and material surface highly important, evident when handling complex biological samples such as plasma or blood. This study demonstrates a new grade of non-covalent heparin surface that adds efficient anticoagulant property to the PDMS material. The surface modification is a simple and fast one-step process performed at neutral pH, optimal when working with closed microsystems. The heparin formed a uniform and functional coating on hydrophobic PDMS with comparatively high level of antithrombin-binding capacity. In addition, long-term studies revealed that the immobilized heparin was more or less stable in the microchannels over a time of three weeks. Recalcified plasma in contact with native PDMS showed complete coagulation after 1h, while no fibrin formation was detected in plasma incubated on heparin-coated PDMS within the same time. In conclusion, we see the heparin coating developed and evaluated in this study as a tool that greatly facilitates the use of PDMS in microfluidics dealing with plasma or blood samples.

Antithrombins↗

PubMed2006

Colloidal crystallization of colloidal silica modified with ferrocenyl group-contained polymers in organic solvents.

Surface modification of colloidal silica with ferrocenyl-grafted polymer and colloidal crystallization of the particles in organic solvent were studied. Poly(methyl methacrylate-co-vinylferrocene)-grafted silica never formed colloidal crystals in polar solvent, such as acetone, acetonitrile, ethanol and N,N-dimethylformamide (DMF), while poly(methyl methacrylate-co-ferrocenyl acrylate)-grafted silica gave colloidal crystallization in DMF. The particles prepared by grafting of poly(N,N-dimethylacrylamide-co-vinylferrocene), with vinylferrocene (Vfc) mole fraction of 1/13 and 1/23, were observed to give the crystallization in ethanol and DMF over particle volume fraction of 0.058. Further, silica modified with copolymer of Vfc and N-vinyl-2-pyrrolidone, N-vinylcarbazole or N-isopropylacrylamide formed colloidal crystals in ethanol and DMF. Especially, poly(N-isopropylacrylamide-co-Vfc)-grafted silica, which was composed of the highest mole fraction of vinylferrocene, 1/3, afforded colloidal crystallization in ethanol over particle volume fraction of 0.053. Relatively high polar vinylferrocene copolymer grafting of silica resulted in colloidal polymerization in organic solvents.

Amides↗

PubMed2004

Polysaccharide-decorated nanoparticles.

Surface modified colloidal carriers such as nanoparticles are able to modulate the biodistribution of the loaded drug when given intravenously, but also to control the absorption of drugs administered by other routes. This review presents the different strategies to coat the surface of polymeric as well as inorganic nanoparticles with polysaccharides. Various physicochemical and biological methods have been described to demonstrate such surface modification. The medical applications, mainly in imaging cancer, of polysaccharide-coated nanoparticles are presented, including their abilities to increase the blood circulation time and to target specific tumoral tissues. It has been shown that these coatings allow also to improve drug absorption via nasal or ocular pathways, due the mucoadhesive and/or permeability enhancer properties of the polysaccharides. Finally, the ability of polysaccharide-coated nanoparticles to deliver DNA or oligonucleotides will be discussed.

Animals↗

PubMed2004

Prevention of catheter-related infections: the potential of a new nano-silver impregnated catheter.

Contaminated or infected catheters are a major source of nosocomial infections responsible for >40% of all episodes of nosocomial sepsis in acute-care hospitals. Antibiotics as well as surface modifications with, for example, hydrogels proved to be of little value in preventing the contamination of indwelling catheters. The even distribution of 10(12-13) activated silver nanoparticles per gram in various polymers, e.g. polyurethane and silicone, results in an excellent antimicrobial activity against a broad spectrum of organisms in vitro. Substantial reduction of incrustation of these catheters was also observed. These preliminary experimental data warrant clinical studies.

Biofilms↗

PubMed2006

Some aspects of drug eluting stents.

For the past few years, the cardiovascular stenting experienced an impressive growth. Beginning several years ago, however, it has come through with novel stent designing, manufacturing, and surface modification as well as drug delivery features. With the present dominance of drug eluting stent, this brief communication highlights a few of its characteristics to be useful in preventing restenosis.

Anticoagulants↗