PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Tooth Demineralization”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88Linked to original sources

Impact of modified acidic soft drinks on enamel erosion.

OBJECTIVE: To evaluate the enamel erosive potential of modified acidic soft drinks under controlled conditions in an artificial mouth. MATERIALS AND METHODS: From each of 144 bovine incisors one enamel sample was prepared. Labial surfaces of the samples were ground flat, polished and covered with adhesive tape, leaving an exposed area. The samples were distributed among four (A-D) groups for treatment with A: Coca-Cola, B: Sprite; C: Sprite light, D: orange juice. Either 1.0 mmol l(-1) calcium (Ca) or a combination (comb.) of 0.5 mmol l(-1) calcium plus 0.5 mmol l(-1) phosphate plus 0.031 mmol l(-1) fluoride was added to the beverages. Samples of each group were subdivided into three subgroups (-original; -Ca and -comb.) for treatment with original and modified drinks. De- and remineralization cycles were based on a standard protocol described earlier. Surface loss of the specimens was determined using profilometry after test procedure. RESULTS: In all subgroups, loss of enamel was observed. The enamel loss recorded for the samples rinsed with original Sprite and original orange juice was significantly higher compared with all other solutions (P = 0.001). Lowest enamel loss was recorded for the original Coca-Cola group (P = 0.001). With the exception of Coca-Cola, demineralization with the modified beverages led to significantly lower losses compared with the respective original solutions. CONCLUSION: Modification of the test soft drinks with low concentrations of calcium or a combination of calcium, phosphate and fluoride may exert a significant protective potential with respect to dental erosion.

Animals↗

Migration, attachment, and orientation of human gingival fibroblasts to root slices, naked and porous-surfaced titanium alloy discs, and Zircalloy 2 discs in vitro.

Cell migration, attachment, and orientation of cultured human gingival fibroblasts (HGF) were measured in relation to four types of specimens: Ti-6Al-4V alloy discs with either ground surfaces or porous structured surfaces, and Zr alloy discs (Zircalloy 2) with either ground surfaces or surfaces modified by being heated to form a thicker oxide cover. Surface-demineralized and non-demineralized root slices were used as controls. Initial cell attachment was measured by means of a 51Cr assay, and cell attachment and orientation following migration by an assay that measures development of the resulting refractile material in relation to the specimen. No significant difference between initial cell attachment to Ti alloy and control demineralized root slices could be detected after one hr using the 51Cr assay. However, with the second assay, cell attachment and orientation at three, seven, 10, and 14 days were significantly higher in relation to surface-demineralized root slices than to all of the metal discs and the non-demineralized root slices. While cell attachment to the surface-ground Ti alloy discs appeared to be higher than that to the porous-surfaced Ti alloy discs at three days and seven days, cell orientation to the porous-surfaced Ti alloy discs and the non-demineralized root slices at days 7, 10, and 14 was greater than that to all of the other metal discs. These data suggest that surface geometry could affect attachment and orientation of cells in vitro.

Alloys↗

[Scanning electronic microscopy analysis of the effect of bleaching solutions on fluorosed enamel].

The authors observed the bleaching of fluorosed human teeth with scanning electronic microscope (SEM). They found that the essence of the bleaching is the demineralization caused by the hydrochloric acid in the bleaching solutions. Physical grinding of the surface of the fluorosed enamel can accelerate the penetration of the solutions into enamel and shorten the bleaching time. The authors also observed the ultrastructural changes caused by the bleaching, and pointed out that the treatment of the bleached enamel surface is very important.

Fluorosis, Dental↗

A scanning electron microscope study of dentinal tubules from un-erupted human teeth.

Twelve fully-formed human third molars were obtained immediately after extraction, the roots removed, the crowns split into buccal and lingual portions fixed in Karnovsky solution and either left in the mineralized state or demineralized in a formic/citric acid solution. Specimens were dehydrated, critical point dried and examined by SEM. Demineralization of the teeth resulted in the loss of peritubular dentine and the appearance within each tubule of a sheet-like structure which extended from the predentine-dentine junction to the dentine-enamel junction. This sheet-like structure, here termed the lamina limitans, may play a role in the control of peritubular dentine formation.

Adult↗

Interfacial morphology of resin composite and shiny erosion lesions.

Ten shiny erosion lesions were divided horizontally, in vivo such that the gingival half was prepared and the incisal half remained unprepared. Both were etched simultaneously with 32% H3PO4 for 20 seconds, rinsed and restored using the All Bond wet technique and P50 composite. The teeth, which were extracted as part of a treatment plan, were sectioned vertically midway through the restorations. Polyvinyl siloxane impressions of the tooth/resin interface were taken and examined by SEM for the presence of gaps. The teeth were then demineralized and the fitting surfaces of the restorations were examined for resin penetration into the dentin. Results showed that there were no gaps present in any of the interfaces. The most proliferative and deep resin penetration occurred in the prepared/etched halves.

Bisphenol A-Glycidyl Methacrylate↗

Effect of fluoride on overdenture abutments.

This study evaluated the caries preventive effects of high concentrations of fluoride on overdenture abutment teeth. Twenty-four extracted caries-free teeth were randomly selected from a pool of patients aged 50-70 and prepared as for overdenture abutments. The teeth were sectioned mesiodistally into two halves. All surfaces on the teeth were painted with a protective varnish except for a window on the root surface and one on the cut dentin of the occlusal. The 48 root halves were randomly divided into four groups of 12 specimens. Each group received a different 4-minute treatment prior to being placed in a demineralizing solution for 6 hours. The treatment groups were (1) distilled H2O only; (2) 1,000 ppm F-; (3) 5,000 ppm F-; and (4) 10,000 ppm F-. The teeth were cycled for 6 hours in the demineralizing solution and 17 hours in a fluoride-free remineralizing solution for 17 days. Sections were cut at 100 +/- 10 microns through the windows. Standardized photomicrographs were made under polarized light using distilled H2O and quinoline as the imbibing media. Microradiographs were made of the same specimens and these were also photographed at the same magnification. The depths of the lesions were measured from drawings of the lesions projected on a digitizer screen. The amount of demineralization was calculated by subtracting the width of the mineralizing bands from the depth of the lesion. The conclusions were: (1) Lesions on the root surface were much shallower than on the occlusal; (2) A dose response to the fluoride concentration of the topical application was evident.

Aged↗

The effect of topical fluoride treatment on enamel fluoride uptake and the tensile bond strength of an orthodontic bonding resin.

Enamel demineralization occurring adjacent to directly bonded orthodontic attachments is of great concern to orthodontists. The topical application of fluorides to enamel surfaces before acid etching and the bonding of the attachments is not recommended by many investigators. The objective of this study was to determine the enamel fluoride acquired from various topical fluoride agents and to determine the effect of the acquired fluoride on the tensile bond strength of an orthodontic bonding system. Fifty extracted maxillary central incisors were mounted in cups and the facial surfaces of the crowns were polished on 600-grit silicon carbide paper. Enamel microbiopsies were performed just off the midpoint of each tooth. Ten teeth served as controls and received no topical fluoride treatment, while a similar number were treated with either APF, SnF2, Duraphat, or Fluor Protector. The teeth were suspended in synthetic saliva 4 minutes after fluoride application. The topical fluoride agents were removed after 24 hours and the teeth were again suspended in synthetic saliva at 37 degrees C for 7 days. Enamel biopsies were again performed just off the midpoint of each tooth on the side not previously biopsied. The enamel surfaces were etched for 1 minute and the tensile bond strength of Concise orthodontic bonding system to the etched enamel surfaces was determined. The enamel surfaces acquired significantly different amounts of fluoride from the topical fluoride agents, but the bond strengths to these surfaces were not significantly different. The results of this in vitro study suggest that the application of topical fluoride agents to enamel surfaces 7 days before the bonding of orthodontic attachments will not have an adverse effect on bond strength.

Acid Etching, Dental↗

Micro-tensile bond strengths of bonding agents to pulpal floor dentine.

AIM: The purpose of this study was to characterize the dentine surface of the pulpal floor and to determine the micro-tensile bond strengths of two dentine adhesive systems used in conjunction with a resin composite core material to pulpal floor dentine. METHODOLOGY: Thirty-six extracted human molars were cut horizontally with a slow-speed diamond saw to expose the pulp chamber and the pulp tissue was removed. Eight teeth were used to investigate characteristics of untreated and etched dentine surfaces of the pulpal floor using SEM. Twenty-eight teeth were randomly allocated to two groups, each of 14 teeth. In group 1, a 'one-bottle' system (Prime & Bond NT) was used as dentine bonding agent and in group 2, a self-etching-priming system (Clearfil SE Bond) was applied. Pulp chambers of both groups were then filled with resin composite core buildup (FluoroCore) and kept moist in tap water at 37 degrees C for 24 h. Samples were prepared for micro-tensile bond testing by sectioning each tooth vertically in the mid-pulpal floor region and shaped to an hour-glass form of 1 +/- 0.2 mm(2) area at the bonded interface. Micro-tensile bond strengths were determined using a universal testing machine at a crosshead speed of 1 mm min-1. Fractured surfaces were examined by SEM. RESULTS: The intact pulpal floor showed numerous calcospherites with variable tubule density and few accessory canals. Etching the pulpal floor with 34% phosphoric acid gel resulted in an irregular surface with patent dentinal tubules and the dome-shaped calcospherites mostly lost. With self-etching primer, the superficial dentine surface was less demineralized and little peritubular dentine matrix was removed. Mean bond strength for the self-etching-priming (Clearfil SE Bond) specimens was significantly greater than for 'one-bottle' (Prime & Bond NT) specimens (P< 0.05, Student's t-test). The fracture mode of Clearfil SE Bond specimens was mostly partial cohesive failure within dentine, whilst Prime & Bond NT specimens mostly showed partial cohesive failure in bonding resin/composite. CONCLUSIONS: Despite an irregular surface morphology and absence of a smear layer, bonding to pulpal floor dentine was weaker than previously reported for cut coronal dentine. The self-etching-priming system bonded more strongly than the 'one-bottle' system.

Acid Etching, Dental↗

[Therapeutic properties of proteins and peptides from colostrum and milk].

Colostrum and milk are rich in proteins and peptides which play a crucial role in innate immunity when transferred to the offspring and may accelerate maturation of the immune system in neonates. The immunotropic properties of these proteins prompted investigators research their potential application in prevention and therapy. Lactoferrin (LF) exhibits antibacterial, antifungal, antiviral, antiparasitice, and antitumoral activities. It is protective with regard to intestinal epithelium, promotes bone growth, and accelerates the recovery of immune system function in immunocompromised animals. LF was tried in the treatment of hepatitis C infection and the intestinal form of graft-versus-host disease (GvHD). A proline-rich polypeptide (PRP) demonstrated a variety of immunotropic functions, including the promotion of T-cell maturation and inhibition of autoimmune disorders. PRP, in the form of chewable tablets (Colostrinin) was recently found to improve or stabilize the health status of Alzheimer's disease patients. Casein and casein-derived peptides showed protective activities in enamel demineralization and as caries-preventing agents. The protein hydrolyzates were also protective in diabetic animals, reduced tumor growth, had antihypertensive activity and diminished colicky symptoms in infants. Glycomacropeptide (GMP), a peptide derived from kappa-casein, exhibited various antibacterial and antithrombotic activities. Alpha-lactalbumin (LA) demonstrated antiviral, antitumoral and anti-stress properties. LA-enriched diets were anxiolytic, lowered blood pressure in rats, prevented diarrhea, and led to a better weight gain in malnourished children. HAMLET, a complex of LA and oleic acid, was effective in patients with cutaneous papillomas. Lysozyme found application in infant formulas, the treatment of periodentitis, and the prevention of tooth decay. Milk enriched in lysozyme was used in feeding premature infants suffering from concomitant diseases. Interesting, antibacterial properties were exhibited by lactoperoxidase. Both lysozyme and lactoperoxidase required cooperative action with LF in combating bacteria. In conclusion, preparations derived from milk and colostrum are effective, easily bioaccessible, and safe, finding wide application in prevention and therapy for newborns and adults.

Adult↗

Comparative observations on the spacing of short-period (von Ebner's) lines in dentine.

The spacing of short-period incremental markings in dentine was measured in longitudinal ground sections and in longitudinal demineralized silver-stained sections of permanent human canines and premolars. Measurements were made (i) within 50 microm from the granular layer of Tomes (GLT), (ii) between 100 and 200 microm from the GLT, and (iii) in the axial plane of the tallest cusps. Median values for the spacing of calcospheritic lines closest to the GLT in the ground sections increased from 1.8 to 2.8 microm as the lines gradually coalesced into a laminar pattern beyond the GLT pulpally. Median values for the spacing of short-period lines in the cuspal dentine, where dentine formation is known to be fastest, were 4.1 microm. Markings in the demineralized sections were between 25 and 39% closer together, presumably due to contraction and shrinkage during specimen preparation. The spacings of short-period incremental lines measured on ground sections of non-human primate dentine (gibbon, siamang, orang) and on pig dentine, all between 100 and 200 microm from the GLT, clustered between 2.5 and 3.5 microm. Apart from gibbon dentine (in which spacings were closer together in this position than in the others), the distribution of measurements was not significantly different in pig, orang or human dentine. However, none of the data for the comparative samples presented here revealed spacings of short-period lines anywhere close to the 16 microm previously reported for circumpulpal dentine in animals. These data suggest that there may be many other animals where the mode and, to some extent, rate of dentine mineralization close to the root surface follows a common pattern. While data for the spacing of incremental markings in dentine provide no evidence for their periodicity, it is clear that the measurements made in the ground sections match the reported daily rates of mineralization at these locations, whereas those in demineralized silver-stained sections do not. Tissue shrinkage is probably a better explanation for this than the generally accepted view that they represent 12 h increments of dentine mineralization. This study provides a better basis for identifying and describing these lines, and for distinguishing them from other kinds of incremental markings in dentine.

Animals↗

Effect of fluoride concentration on remineralization of carious enamel: an in vitro pH-cycling study.

An in vitro pH-cycling experiment was carried out to investigate the effect of fluoride concentration on enamel demineralization and remineralization. Artificial caries lesions were formed in an acid-buffered solution and subjected daily to a 3-hour acid attack, a 5-min immersion in the test NaF solution (0, 1, 250, 500, 1,000, 1,750 and 2,500 ppm F), and to 21 h in an artificial saliva. Changes in mineral content were assessed weekly for 5 weeks using microradiography/microdensitometry. The lesions in the control group (0 ppm F) and the 1-ppm F group demineralized. Remineralization was significantly higher in the 500-ppm F group compared to the 250-ppm F group. However, higher fluoride concentrations did not produce any further significant increase in remineralization. Laminations were apparent in lesions subjected to the 250- and 500-ppm F solutions.

Bicuspid↗

Localized ridge maintenance using bone membrane.

The immediate placement of a dental implant into a fresh extraction socket has been limited in many instances by the quantity of bone that remains after the extraction. This article presents two clinical cases that demonstrate successful regeneration of alveolar ridges in which there was extensive loss of the buccal plate of bone. This lack of alveolar process impeded the immediate placement of dental implants into fresh extraction sockets. The surgical technique performed in these cases was based on the principles of guided bone regeneration using a demineralized freeze-dried bone membrane. The bone membrane acted as an efficient barrier that excluded the nonosteogenic tissues. Bone formation took place for the placement of endosseous dental implants 8 months after the procedures were initiated. These human clinical cases confirm positive results of previous animal findings.

Adult↗

Staining of residual caries under freshly-packed amalgam restorations exposed to tea/chlorhexidine in vitro.

Discoloration around restorations may lead practitioners to suspect recurrent caries. Dentists, using conventional optical and tactile criteria, often fail to render the enamel-dentine junction completely caries-free during cavity preparation. The aim of the present laboratory study was to test the hypothesis that such residual caries could take up stain from tea and hence affect clinical judgement on the presence of recurrent disease. Cavities were prepared in freshly extracted carious teeth and restored with amalgam. Specimens were then temperature cycled in tea and chlorhexidine or in tea alone to encourage leakage. Subsequent removal of restorations showed staining of parts of the enamel-dentine junctions and histological examination showed these stained areas to correspond to areas of demineralization. Similarly prepared caries-free teeth showed no such staining. Thus residual caries in teeth with leaking restorations can, in the laboratory, take up stain. If this were to happen in vivo, stained residual caries could subsequently be misdiagnosed as recurrent caries.

Chlorhexidine↗

Effect of two sodium fluoride dentifrices on fluoride uptake and remineralization in situ.

Two dentifrices containing 1100 ppm F from sodium fluoride in silica bases were compared to a placebo dentifrice in an in situ remineralization and fluoride uptake study. Fifteen subjects brushed artificially-formed caries lesions in 60 thin enamel sections and 30 enamel blocks with each dentifrice in a double-blind, randomized, cross-over study design. Analysis of the thin sections by quantitative microradiography before and after exposure to toothbrushing showed that the fluoride dentifrices produced 18.3% and 7.1% remineralization whereas use of the placebo resulted in 10.3% demineralization. The differences between all three dentifrices were statistically significant. Fluoride concentrations at the surface of the lesion increased from approximately 700 ppm F in untreated specimens to approximately 1800 ppm F in specimens treated with either of the two fluoride dentifrices. These data suggest that formulation differences may affect the anticaries activity of a dentifrice without being reflected by fluoride deposition.

Humans↗

Formation of afibrillar acellular cementum-like layers induced by alkaline phosphatase activity from periodontal ligament explants maintained in vitro.

Fibroblasts of the periodontal ligament, by their alkaline phosphatase (ALP) activity, are considered to play a role in the formation of acellular cementum. As a means of exploring this hypothesis, periodontal ligament explants from rat incisors were cultured in direct contact with bovine dentin slices in the presence of 10 mmol/L beta-glycerophosphate. Periosteal and pericardial tissue explants were maintained under similar conditions. After two weeks, the slices were harvested and processed for electron microscopic examination. Controls included periodontal ligament explants to which the ALP-inhibitor levamisole was added. The results suggest that only ALP-positive cultures from periodontal ligament and periosteum form mineralized layers along the dentin. After demineralization, layers consisted of fine filamentous or granular material of moderate electron-density and resembled afibrillar acellular cementum. Our findings support the hypothesis that periodontal ligament fibroblasts, by means of their ALP activity, play a pivotal role in the formation of acellular cementum.

Alkaline Phosphatase↗

Bonding to cervical sclerotic dentin: effect of acid etching time.

PURPOSE: The aim of this in vitro study was to evaluate the microtensile bond strengths (MTBS) of two total-etch one-bottle adhesive systems to natural cervical lesions with 2 different etching times (15 s vs 30 s). MATERIALS AND METHODS: Thirty-two human canines and premolars with saucer-shaped noncarious cervical defects were cleaned and randomly assigned to 4 groups. The adhesive systems - Single Bond (SB; 3M ESPE) or OptiBond Solo Plus (OP; Kerr) - were applied on cervical dentin after acid etching with the proprietary acid gel (35% or 37.5% phosphoric acid) for 15 s (manufacturer's instruction) or for 30 s. The respective hybrid composite was inserted in three increments and light cured. After 24 h water storage, the specimens were cut perpendicularly with a low-speed diamond saw (Isomet) to obtain slices with a cross section of ca 0.8 mm. After that, the slices were trimmed with a diamond bur to obtain a surface area of 0.7 +/- 0.05 mm2 (n = 12). MTBS was measured in a Bencor device with an Instron machine at a crosshead speed of 0.5 mm/min. The data were subjected to two-way ANOVA and Tukey's LSD post-hoc test (p < 0.05). RESULTS: MTBS are given in MPa (mean +/- SD), where means with the same superscript letter are not statistically different at p < 0.05: OP15 = 30.9 +/- 8.8ab, SB15 = 25.6 +/- 9.6bc, OP30 = 19.0 +/- 4.8c, SB30 = 35.9 +/- 11.0a. When data were pooled for "adhesive system", SB resulted in statistically higher bond strengths than OP (p < 0.043). "Acid etching time" had no significant effect (p < 0.766), but the interaction of the two main factors yielded significant differences (p < 0.0001). Extending etching time to 30 s resulted in a more predictable bond to noncarious cervical sclerotic dentin with SB, but resulted in lower MTBS with OP. CONCLUSION: Composite bonding to cervical sclerotic noncarious dentin may depend on acid demineralization capacity and bonding system. Knowing the etching demineralization rates of the commercially available acid etching seems to be an important factor for selecting the best acid-etching time of cervical sclerotic dentin.

Acid Etching, Dental↗

Ultrastructural demonstration of the carbohydrate in developing rat enamel using soybean agglutinin-gold complexes.

Fine structure and organic-inorganic relationships in early immature enamel, and the localization of N-acetyl-D-galactosamine in its matrix, were studied with a post-embedding demineralization and staining method, and a lectin-gold technique, respectively. Organic structures were observed that had similarities in shape but not in size to the original enamel crystals. Particles of colloidal gold coated with soybean agglutinin were scattered in the enamel region on the demineralized, unstained sections. After staining with uranyl acetate and lead citrate, gold particles were observed in close association with organic filamentous structures. These findings suggest that crystals of immature enamel are organic-inorganic structures, the organic structures of which contain N-acetyl-D-galactosamine.

Acetylgalactosamine↗

Comparison of solution- and gel-prepared enamel lesions--and in vitro pH-cycling study.

A variety of methods has been employed to produce artificial caries-like enamel lesions. The aim of this paper was to use a pH-cycling regime to compare the de-/remineralization behavior of lesions prepared by two methods. Lesions were produced by use of either an acidified undialyzed gelatin system or a buffered solution. Enamel sections, each containing four lesions, were allocated to four groups (A, B, C, D) and subjected to a daily pH-cycling regime of 16-hour demineralization and eight-hour remineralization. Groups A & B contained gelatin-prepared lesions, whereas Groups C & D contained solution-prepared lesions. To the remineralizing solutions used in Groups B & D, 2 ppm fluoride was added. The mineral content in the lesions was assessed, by means of microradiography/microdensitometry, at baseline and at intervals for six weeks. The lesions in all four groups exhibited net demineralization. In terms of the total mineral lost from the lesion (the delta z parameter), the demineralization rates of the solution-prepared lesions were significantly greater than those of the corresponding gelatin-prepared lesions. All sections in the non-fluoride groups showed subsurface demineralization in initially sound enamel, whereas only one section in the fluoride groups showed an area of mineral loss. Laminations in the mineral content profiles were apparent only in Group D. The results of this study indicate that the method of lesion preparation affects the subsequent behavior of lesions when exposed to de- and remineralizing protocols.

Bicuspid↗