PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Tooth Demineralization”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89Linked to original sources

Evaluation of the interface between one-bottle adhesive systems and dentin by Goldner's trichrome.

PURPOSE: To evaluate the hybrid layers in interfaces between dentin and six contemporary one-bottle adhesive systems using a nondestructive differential staining micro-technique. METHODS: The adhesive systems used in this study were divided to three groups based on hydrophilic/hydrophobic component ratios (i.e. ability to dissolve in water), from highest to lowest as follows: Group 1 (Dentastic UNO.DUO, PermaQuick PQ1) > Group 2 (One-Step, Primer&Bond NT) > Group 3 (Optibond Solo, Single Bond). The occlusal third of the crown was removed from 36 extracted, unerupted human 3rd molars. Smear layers were created by abrading the dentin with 600 grit SiC under water. The exposed dentin was treated with one of the adhesive systems per manufacturer's instructions. After 24 hours in water, 3-5 microm thin sections of the adhesive/dentin (adhesive/dentin ) interface were cut with a microtome and stained with Goldner's trichrome. Stained thin sections from each prepared tooth were imaged with light microscopy. RESULTS: The thickness and color difference of adhesive/dentin interfaces among these one-bottle adhesive systems were clearly visualized. The width of the hybrid layers varied, ranged from 4.1-9.2 microm for six adhesive systems. The color differences in the stained sections are reflected to the extent and degree to which the adhesive envelops the exposed collagen. Among these six bonding systems, resin encapsulation of collagen varied from highest to lowest as follows: Group 1 (UNO, PQ1) > Group 2 (OS, PBNT) > Group 3 (OP, SB). The differences in collagen encapsulation are dependent on the adhesive composition, or the ability to tolerate water during the infiltration of the wet demineralized matrix.

Azo Compounds↗

Bicarbonate-based powder and paste dentifrice effects on caries.

The effects of sodium bicarbonate-based powder and paste dentifrices on dental caries and Streptococcus sobrinus recoveries in rats were studied. Three S. sobrinus 6715-13WT infected groups of specific pathogen-free weanling rats, consuming a diet which contains 56% sucrose, were topically treated with either demineralized water, dentifrice paste, or dentifrice powder. Both the paste and powder contained 0.22% (w/w) NaF. All topical treatments were given for one min daily per rat, five days a week. Animals' teeth were swabbed for recovery of 6715-13WT and total recoverable flora. Recoveries of 6715-13WT were 75% lower from both powder-treated and paste-treated dentifrice than from water-treated rats' teeth (p less than 0.001). Total caries scores were 45% lower for the powder-treated and 43% lower for the paste-treated rats than the water-treated ones (p less than 0.01). The major portion of the caries inhibition was evident on smooth tooth surfaces, 68% for powder-treated and 65% for paste-treated by comparison with water-treated animals (p less than 0.01), although a lesser caries reduction was also evident in tooth fissures (sulci). Thus, both powder and paste formulations of a sodium bicarbonate-based dentifrice containing 0.22% NaF equally and potently inhibited caries in rats, challenged bacteriologically and dietarily to develop severe caries.

Animals↗

Orthodontic-restorative treatment of chipped or worn incisors.

PURPOSE: To evaluate the shear bond strength of esthetic adhesive restorations for worn or fractured incisal edges. MATERIALS AND METHODS: On 30 human extracted incisors the edge was reduced and a bevel was prepared in the thickness of enamel. Then, the incisal edges were restored, using a different adhesive system in each of the three groups to which the sample teeth had been randomly assigned. Group A: Scotchbond Multi-Purpose Plus, in combination with phosphoric acid, and Z100 as a restorative material. Group B: Scotchbond 1 after etching with phosphoric acid, plus Z100. Group C: F2000, a compomer, in combination with its Primer/Adhesive. The differences in the bond strength values among the three groups were tested for statistical significance. Also, the resistance to load of the restored teeth was compared with that of 10 intact incisors (Group D) (controls). A statistical analysis was performed to test the significance of the differences. RESULTS: No statistically significant difference in shear bond strength was found between Scotchbond Multi-Purpose Plus (17.6 MPa) and Scotchbond 1 (14.8 MPa), whereas F2000 gave significantly lower bond strength values (10.1 MPa). As compared with intact incisors, the teeth restored with either Scotchbond Multi-Purpose Plus or Scotchbond 1 did not perform significantly differently under load. On the other hand, the incisors restored with F2000 gave, as compared with the controls, a resistance to loads significantly lower and of a questionable reliability from a clinical standpoint. SEM observations performed on some of the samples revealed that when phosphoric acid was used to condition the substrate, a deep and uniform demineralization of the enamel was effected, and a mechanically retentive interlocking was created at the interface between resin and enamel. The Adhesive/Primer of F2000 was unable to produce an equally retentive morphology.

Acid Etching, Dental↗

SnF2 treatment of enamel, hydroxyapatite or brushite at 37 degrees C and 50 degrees C: an infra-red investigation.

The effect of 4% SnF2 on brushite, hydroxyapatite and powdered bovine enamel applied for short, 15 or 30 minute, periods was investigated using infra-red spectroscopy. It was found that brushite was converted into a fluoridated hydroxyapatite, a reaction which was both time and temperature dependent. The reactions of hydroxyapatite and powdered enamel with SnF2 were similar. There was a drop in the OH- peak intesities. X-ray diffraction analysis of these samples showed that F- ions occupied mainly OH positions in the hydroxyapatite lattice structure. In all reactions an increase in temperature from 37 degrees C to 50 degrees C increased the reaction speed by at least a factor 2. The most probable result of in vivi SnF2 application on sound enamel is the formation of a fluoridated hydroxyapatite together wity stannous complexes and amorphous CaF2. In demineralized areas some of the brushite is converted into a fluoridated hydroxyapatite as is some of the remaining hydroxyapatite. In the more protected area of an enamel lesion these reactions may well continue for some time after the topical fluoride application; Sn2F3PO4 may also therefore be formed.

Animals↗

Stability of citric acid solutions during a five month period.

The purpose of this study was to examine the effect of time, light and air exposure on the pH stability and demineralization ability of a standardized pH 1 citric acid solution. A 0.5 liter pH 1 citric acid solution was prepared and examined over a 5 month period. The results indicated that pH 1 citric acid and solutions prepared under the described conditions remained stable during the examination period with regards to all tested variables.

Air↗

On the physical chemistry of tooth enamel and the caries process.

A model is presented for the pathway of reactions of the mineral of tooth enamel during caries. It is based on a mathematical simulation of the caries process (van Dijk, Borggreven and Driessens, 1979) and knowledge about the variable solubility behaviour of calcium phosphates (Driessens, van Dijk and Borggreven, 1978). According to this model the surface of the crystals in the intact superficial layer of enamel will transform into a relatively pure fluor-hydroxyapatite; in the lesion a mineral with a brushite- or monetite-like composition will be formed, while at the bottom of the lesion an increasing amount of the original carbonatoapatite will be found. The experimental studies of Arends and Davidson (1975) and of Featherstone, Duncan and Cutress (1978) corroborate these results. The model also explains why demineralization take place at some distance under the enamel surface, and predicts that the intact superficial layer of enamel over a lesion becomes thicker with increasing pH of the plaque fluid and with its degree of saturation with respect to fluor- and hydroxyapatite (Larson, 1974 b). Sobel's finding (1960) that high-carbonate teeth are more susceptible to caries than low-carbonate teeth is consistent with the present model.

Apatites↗

Comparison of the iodide permeability test, the surface microhardness test, and mineral dissolution of bovine enamel following acid challenge.

The relationship among the iodide permeability (Ip) test, the surface microhardness (SMH) test, and enamel demineralization chemically analyzed as mineral loss was investigated using bovine enamel blocks. Demineralization periods of 0 (control) and 5, 15, 30, and 45 min using 0.05 mol/l lactate (pH 4.75) were chosen to approximate the acid challenge occurring during the intraoral enamel demineralization test. Mineral loss (Ca and PO4) was found to be directly proportional to dissolution time (r = 0.95). Changes (delta) in Ip and SMH each increased linearly over time (r = 0.58 and 0.64, respectively) and were similarly related to mineral loss (r = 0.60 and 0.65, respectively). The correlation between delta Ip and delta SMH was 0.55. When longer demineralization periods (60, 120, and 240 min) were included, the correlation between delta Ip and delta SMH was 0.68. We conclude that both the Ip test and the SMH test can be used as measures of the early stages of enamel dissolution.

Animals↗

Structure and microstructure of coronary dentin in non-erupted human deciduous incisor teeth.

The dentin structure of non-erupted human deciduous mandibular and maxillary central and lateral incisor teeth was studied employing light and scanning electron microscopy. For light microscopy, nitric-acid-demineralized and ground sections were used. The sections were stained by hematoxylin-eosin, picrosirius and azo-carmine methods, and ground specimens were prepared using a carborundum disk mounted in a handpiece. For SEM study, teeth were frozen in liquid nitrogen and fractured at longitudinal and transversal directions. Structurally, demineralization and ground methods revealed tubules with primary and secondary curvatures, canaliculi, giant tubules, interglobular dentin, predentin, and intertubular dentin. Scanning electron microscopy showed three-dimensional aspects of dentinal tubules, canaliculi, peritubular dentin, intertubular dentin, and predentin. This study contributes to knowledge about dentin morphology showing characteristics of teeth not yet submitted to mastication stress.

Dentin↗

[Establishment of immediate implant animal model in mongrel dog's fresh extraction socket].

The purpose of the study was to establish the animal models which had clinical characteristics in bone defect sizes around immediate implants. The mesial region of dogs' fresh extraction sockets were made with 3 mm x 3 mm x 5 mm size bone defects around implants with a round bur, then observed their osseous changes at 2 weeks, 4 weeks, 8 weeks, 12 weeks with and without demineralized freeze-dried bone allograft (DFDBA) filled. The results showed that the bone defects in DFDBA grafted group were substituted by new bone, but the defects in ungrafted group were only substituted to 3/5. Such animal models had the advantages of simple preparations and similar clinical characteristics, so they were beneficial to investigation of the immediate implantation.

Animals↗

[The development of initial enamel caries--a phenomenon of interfacial reactions].

The investigation deals with earliest chemical changes in outermost enamel surfaces during initial caries development. After in vitro demineralization of enamel samples in acidulated hydroxyethylcellulose solution (pH = 5.1) for periods between 1 and 288 h the Ca/P molar ratios were determined in depths of 0.04 micron using the Rutherford Backscattering spectroscopy. The measured Ca/P ratios oscillate around the initial value. This behaviour is interpreted as a combined de/remineralization process.

Calcium↗

Fibrin clot adhesion to dentin conditioned with protein constructs: an in vitro proof-of-principle study.

OBJECTIVES: Periodontal regeneration is contingent on the adsorption, uninterrupted adhesion, and maturation of a fibrin clot to a periodontally compromised root surface. Clot adhesion appears vitally dependent on the formation of a resilient union between the clot and the root surface. Root surface demineralization will remove a root surface smear layer exposing dentin tubules and collagen matrix for enhanced clot adhesion. Recently, protein constructs have been introduced to condition the root during periodontal surgery. The effect of such root conditioning on clot adhesion has not been clarified. The objective of this study was to evaluate clot adhesion to protein conditioned dentin surfaces. METHODS: Human dentin blocks (4 x 6 x 1 mm) were exposed to a saturated citric acid solution (CA) or a commercial ethylenediaminetetraacetic acid (EDTA) preparation using standardized protocols. Some dentin blocks were additionally conditioned with proteins, either bovine serum albumin (BSA) or an enamel matrix protein preparation (EMP). Fresh human whole blood was applied to the blocks. The blood was allowed to clot for 20 min. in a humidified chamber. The dentin blocks were rinsed 3 x 5 min. in phosphate-buffered saline under standardized conditions to test clot adhesion. They were then processed for scanning electron microscopy (SEM). Two masked examiners independently evaluated the SEM images. RESULTS: CA removed the dentin smear layer, exposing dentin tubules and collagen. EDTA appeared less efficacious leaving smear layer residues. The BSA or EMP application resulted in a surface morphology similar to that of a smear layer. Fibrin clot adhesion was best supported by the CA-treated dentin surface. Forces produced by the rinse protocol partially removed the fibrin clot from EDTA-treated surfaces. BSA- or EMP-treated surfaces poorly retained the fibrin clot. CONCLUSIONS: CA surface demineralization removes a dentin surface smear layer to promote adhesion of a fibrin clot. The EDTA gel appears less effective. Further conditioning of the dentin surface with protein constructs produces a surface morphology similar to that of the smear layer with poor fibrin clot retention.

Animals↗

Effect of thermal and mechanical load cycling on microtensile bond strength of a total-etch adhesive system.

To evaluate the effect of thermal and mechanical cycles on dentin bond strength to cervical margins of Class II restorations, 80 box-type Class II cavities were prepared on the surfaces of bovine incisors. The cavities were restored with Single Bond (3M-ESPE) and Z-250 composite (3M-ESPE) according to manufacturer's instructions. The incisors were divided into four groups: G1-Control, G2- Thermal cycling (2,000 cycles, 5 degrees C-55 degrees C), G3- Mechanical cycling (100,000 cycles; 50N) and G4- Thermal and mechanical cycling (2,000 cycles 5 degrees C-55 degrees C/100,000 cycles; 50N). The restorations were sectioned perpendicular to the cervical bonded interface into 0.7 +/- 0.2 mm-thick slabs. The slabs were further trimmed at the interface to 1.4 +/- 0.2 mm with a fine diamond bur to produce a cross-sectional surface area of 1 mm2. All specimens were then subjected to microtensile bond testing. Means and standard deviations were expressed in MPa. The bond strength data were analyzed by one-way ANOVA and Fisher's PLSD test (p<0.05). Fracture mode analysis was performed using SEM. Bond strengths were significantly lower when thermal and mechanical cycling were performed [G4-2.41 (8.57)] when compared to the other groups [G1-28.15 (14.03); G2-27.60 (10.14); G3-27.59 (8.67)]. No differences were observed among Groups 1, 2 and 3. Interfacial fracture of the control (G1) and thermocycling (G2) groups mainly occurred between the deepest portion of the adhesive resin and the top layer of the demineralized dentin (Interphase). Mixed failure was predominant and increased when mechanical cycling was applied (G3 and G4).

Acid Etching, Dental↗

Burnished versus nonburnished application of citric acid to human diseased root surfaces: the effect of time and method of application.

Citric acid (pH = 1) was applied passively or by vigorous burnishing for 3 or 5 minutes to diseased human root surfaces following root planning in vitro. Control surfaces were similarly treated with saline only. Teeth were fixed in glutaraldehyde, dehydrated, freeze-dried, and sputter coated with gold for scanning electron microscopic viewing. Results suggested that optimal exposure of collagen and demineralization occurred with the burnishing application of citric acid for 3 minutes. Although somewhat similar results were found with passive application for 5 minutes, the result of the burnishing application for 5 minutes was that the root was overdemineralized or that the exposed collagen was completely obscured by an amorphous layer that was suggestive of protein denaturization.

Citrates↗

[Root surface biocompatibility].

The optimal result of periodontal therapy is the regeneration of tissues previously destroyed by periodontal disease. In order for regeneration to occur, it is believed necessary to eliminate all root surface alterations. Preparation of the root surface include scaling and root planning, use of acids and other chemical and biological agents. Citric acid has been studied by several authors, but still remains in controversy the biological nature of its effects. In spite of this, the findings of some studies indicate that citric acid used on root surfaces results in: elimination of endotoxins; chemical, exposure of dentin collagen fibers; induction of cementogenesis by the exposed dentin; demineralization of root cementum; enhancement of fibroblast attachment when a plasma factor is used in addition to citric acid demineralization and influence on direction in which the epithelium initially starts to migrate. By the other hand root surface preparation by mean of scaling and root planning is an unpredictable procedure due to variables such as failure to remove the cementum on calculus debris in a clinical situation. New research is needed in order to obtain a predictable root conditioning procedure for a biological surface.

Citrates↗

A finite-difference computer model of solute diffusion in bacterial films with simultaneous metabolism and chemical reaction.

This finite-difference computer model is designed to simulate complex diffusion/reaction events in bacterial films. It is modular, each module mirroring closely a particular physical, chemical or biochemical factor. It is capable of handling > 20 diffusing/reacting species, but can be easily expanded or simplified to match particular systems. It was originally designed for modelling the events in dental plaque leading to tooth decay, but should find application in other fields. It allows for ion-exchange interactions with, for example, fixed charges on bacterial surfaces, which can act as pH and cation buffer sites. pH-dependent utilization of substrate is modelled implicitly, combining Michaelis-Menten kinetics with diffusion in a single iterative procedure. Advantages are given for computing diffusion of all other species explicitly using single-species diffusion coefficients, with charge-coupling by means of the algorithm Q-COUPLE. Activity corrections and enzyme pH-dependence are included. Chemical equilibria and mineral deposition/dissolution are computed iteratively node by node. The program is tested against some problems having analytical solutions, and an example is given of its application to demineralization of teeth as a result of bacterial action in dental plaque.

Algorithms↗

Establishment of acellular extrinsic fiber cementum on human teeth. A light- and electron-microscopic study.

The present study describes for the first time the development of early acellular extrinsic fiber cementum (AEFC) until its establishment on human teeth. Precisely selected premolars with roots developed to 50%-100% of their final length were prefixed in Karnovsky's fixative and most of them were decalcified in EDTA. Their roots were subdivided into about 10 blocks each, cut from the mesial and distal root surfaces. Following osmication, these blocks were embedded in Epon and sectioned for light- and transmission electron microscopy. Some blocks were cut non-demineralized. From semithin stained sections, the density of the collagenous fiber fringe protruding from the root surface was measured by using the Videoplan-system. After initiation of this fiber fringe and its attachment to the dentinal root surface followed by mineralization, the fringe gradually increased in length and subsequently became mineralized. Fringe elongation and the advancement of the mineralization front appeared to progress proportionally. Thus, in all stages of AEFC development, a short fiber fringe covered the mineralized AEFC. Its density remained constant, irrespective of AEFC thickness. The latter gradually increased and reached an early maximum of 15-20 microns in the cervical region. At this stage, the AEFC fringe appeared to fuse with the future dentogingival or other collagen fibers of the tooth supporting apparatus. Mineralization of the fringe commenced with isolated, spherical or globular centers, which later fused with the mineralization front and became incorporated in AEFC.

Adolescent↗

Reconstruction of the alveolar process by implantation of allogenic demineralized dentin.

Different materials have been used for reconstruction of the alveolar process. None of these, however, is perfect in every respect. Allogenic demineralized dentin has been shown to induce bone formation and to maintain the bone contour. In the present case this material was used to reconstruct a traumatic defect of the alveolar process in the region of the upper left incisors. The result was satisfactory, both esthetically and functionally. Additional cases and a longer period of observation will be necessary to assess the relevance of this finding.

Accidents, Traffic↗

Biological and medical significance of calcium phosphates.

The inorganic part of hard tissues (bones and teeth) of mammals consists of calcium phosphate, mainly of apatitic structure. Similarly, most undesired calcifications (i.e. those appearing as a result of various diseases) of mammals also contain calcium phosphate. For example, atherosclerosis results in blood-vessel blockage caused by a solid composite of cholesterol with calcium phosphate. Dental caries result in a replacement of less soluble and hard apatite by more soluble and softer calcium hydrogenphosphates. Osteoporosis is a demineralization of bone. Therefore, from a chemical point of view, processes of normal (bone and teeth formation and growth) and pathological (atherosclerosis and dental calculus) calcifications are just an in vivo crystallization of calcium phosphate. Similarly, dental caries and osteoporosis can be considered to be in vivo dissolution of calcium phosphates. On the other hand, because of the chemical similarity with biological calcified tissues, all calcium phosphates are remarkably biocompatible. This property is widely used in medicine for biomaterials that are either entirely made of or coated with calcium phosphate. For example, self-setting bone cements made of calcium phosphates are helpful in bone repair and titanium substitutes covered with a surface layer of calcium phosphates are used for hip-joint endoprostheses and tooth substitutes, to facilitate the growth of bone and thereby raise the mechanical stability. Calcium phosphates have a great biological and medical significance and in this review we give an overview of the current knowledge in this subject.

Animals↗