SEARCH · PubMed Health

Results for “APATITES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

PubMed1998

Formation of carbonate apatite on calcium phosphate coatings containing silver ions.

The prerequisite for bioactive materials to bond to living bone is the formation of biologically equivalent carbonate apatite on their surfaces in the body. Calcium phosphate ceramic surfaces can be transformed to a biological apatite through a series of surface reactions including dissolution-precipitation and ion exchange. In the present work, apatite coatings with different crystallinity, compositions and crystal sizes, including a well-crystallized hydroxyapatite coating, were synthesized electrochemically and doped with silver ions in silver nitrate solution at room temperature. The formation of a new carbonate apatite on the surface of these coatings was investigated in an acellular simulated body fluid with ion concentrations comparable with those of human blood plasma, using scanning electron microscopy and Fourier transform-infrared spectroscopy. The results show that small quantities of silver ions incorporated into apatite coatings may have a strong stimulatory effect on the formation of carbonate apatite without adversely affecting the chemical stability of these coatings.

Journal Article↗

PubMed1996

Formation of apatite-collagen complexes.

An apatite-collagen complex was prepared in calcium beta-glycerophosphate solutions at pH 9.0 and 37 degrees C with the purpose of developing new bone substitutes that more closely resemble bone than currently available materials. Reconstituted type I collagen as well as sheet collagen were crosslinked in the presence of alkaline phosphatase and egg-yolk phosvitin. The crosslinked collagens were immersed in daily-renewed calcium beta-glycerophosphate solutions for 2 and 4 weeks to induce the deposition of apatite on the collagen fibers. After 2 weeks of reaction, for example, apatites deposited approximately two times the crosslinked collagen in weight. With reconstituted collagen, the complex showed some elasticity but no apatite was visually observed to detach under deformation with fingers and forceps. The complex, moreover, did not disintegrate when immersed in saline or animal blood. Nevertheless, the complex resorbed with no evidence of cytotoxicity when implanted in muscle tissues. These findings suggest that the apatite-collagen complex prepared would be useful as bone substitutes, especially for periodontal osseous lesion repair and alveolar ridge augmentation.

Alkaline Phosphatase↗

PubMed1996

Apatite-forming ability of silicate ion dissolved from silica gels.

It is known that the prerequisite for glasses and glass-ceramics to bond to living bone is the formation of biologically active bonelike apatite on their surfaces, and a certain type of hydrated silica developed on their surfaces plays an important role in nucleating the apatite. In the present study, the apatite-forming ability of silicate ion dissolved from different silica materials into a simulated body fluid was examined as follows. Polyether sulfone substrates pretreated with O2 plasma were placed in parallel to plates of three kinds of silica gels prepared in different media and silica glass, with a distance of 0.5 mm between them in a simulated body fluid with ion concentrations nearly equal to those of human blood plasma for 4 days, and then soaked in a solution with ion concentrations 1.5 times those of the simulated body fluid for 6 days. After the first soaking, silicon combined with oxygen was detected on the surfaces of the substrates faced to all the silica gels, whereas it was not detected on that faced to the silica glass. After the second soaking, the former formed a bonelike apatite layer on their surfaces, but the latter did not. These results indicate that silicate ion which is dissolved from the silica gels and adsorbed on the substrates has an apatite-forming ability, irrespective of the microstructure of the original silica gels.

Apatites↗

PubMed1996

Apatite formation on silica gel in simulated body fluid: its dependence on structures of silica gels prepared in different media.

It has been shown that the prerequisite for glasses and glass-ceramics to bond to living bone is the formation of a layer of biologically active bonelike apatite on their surfaces. The hydrated silica formed on the surfaces of glasses and glass-ceramics plays an important role in nucleating the apatite. In the present study, the structure of the hydrated silica responsible for the apatite nucleation was investigated in an accellular simulated body fluid with ion concentrations nearly equal to those of human blood plasma. Three kinds of porous silica gels were prepared by hydrolysis and polycondensation of tetraethoxysilane in pure water or in aqueous solution containing polyethylene glycol or polyacrylic acid. The silica gels prepared in aqueous solution containing polyethylene glycol or polyacrylic acid had micron-size interconnected pores, whereas the gel prepared in pure water did not. All the gels contained a large volume of nanometer-size pores, almost the same amounts of silanol groups and D2 defect, and showed a high dissolution rate of the silica. Despite this, only the gel prepared in the solution containing polyethylene glycol formed the apatite on its surface in the simulated body fluid. This indicates that only a certain type of structural unit of the silanol group is responsible for the apatite nucleation.

Acrylates↗

PubMed1999

Apatite formation on ethylene-vinyl alcohol copolymer modified with silanol groups.

The surfaces of ethylene-vinyl alcohol copolymer (EVOH) substrates were modified with silanol (Si-OH) groups, and their apatite forming ability was examined in a simulated body fluid (SBF) with ion concentrations nearly equal to those of human blood plasma or in a solution with ion concentrations 1.5 times those of SBF (1.5SBF). The surface modification of EVOH was carried out by reacting 3-isocyanatopropyltriethoxysilane, followed by hydrolysis of the ethoxysilyl groups into Si-OH groups. However, no apatite formation was observed on the EVOH substrate thus modified, even after 3 weeks in SBF and 1.5SBF. The Si-OH modified EVOH substrate was further modified by hydrolysis and polycondensation of tetraethyoxysilane (TEOS). It was found that the apatite forms on the TEOS-modified substrate within 3 weeks in 1.5SBF. These results suggest that the presence of a large amount of Si-OH groups (i.e., a cluster of Si-OH groups) on the substrate is prerequisite to apatite formation in the body environment. Apatite-EVOH composites prepared by this process might be useful as hard tissues substitutes.

Apatites↗

PubMed2001

TEM-EDX study of mechanism of bonelike apatite formation on bioactive titanium metal in simulated body fluid.

Bioactive titanium metal, which forms a bonelike apatite layer on its surface in the body and bonds to the bone through the apatite layer, can be prepared by NaOH and heat treatments to form an amorphous sodium titanate layer on the metal. In the present study, the mechanism of apatite formation on the bioactive titanium metal has been investigated in vitro. The metal surface was examined using transmission electron microscopy and energy dispersive X-ray spectrometry as a function of the soaking time in a simulated body fluid (SBF) and complemented with atomic emission spectroscopy analysis of the fluid. It was found that, immediately after immersion in the SBF, the metal exchanged Na(+) ions from the surface sodium titanate with H(3)O(+) ions in the fluid to form Ti-OH groups on its surface. The Ti-OH groups, immediately after they were formed, incorporated the calcium ions in the fluid to form an amorphous calcium titanate. After a long soaking time, the amorphous calcium titanate incorporated the phosphate ions in the fluid to form an amorphous calcium phosphate with a low Ca/P atomic ratio of 1.40. The amorphous calcium phosphate thereafter converted into bonelike crystalline apatite with a Ca/P ratio of 1.65, which is equal to the value of bone mineral. The initial formation of the amorphous calcium titanate is proposed to be a consequence of the electrostatic interaction of negatively charged units of titania, which are dissociated from the Ti-OH groups, with the positively charged calcium ions in the fluid. The amorphous calcium titanate is speculated to gain a positive charge and to interact with the negatively charged phosphate ions in the fluid to form the amorphous calcium phosphate, which eventually stabilizes into bonelike crystalline apatite.

Apatites↗

PubMed2002

Apatite-forming ability of a zirconia/alumina nano-composite induced by chemical treatment.

Induction of an apatite-forming ability on a nano-composite of a ceria-stabilized tetragonal zirconia polycrystals (Ce-TZP) and alumina (Al2O3) polycrystals via chemical treatment with aqueous solutions of H3PO4, H2SO4, HCl, or NaOH has been investigated. The Ce-TZP/Al2O3 composite is attractive as a load-bearing bone substitute because of its mechanical properties. The chemical treatments produced Zr-OH surface functional groups, which are known to be effective for apatite nucleation in a body environment. The composite, after chemical treatment, was shown to form a bonelike apatite layer when immersed in a simulated body fluid containing ion concentrations nearly equal to those in human blood plasma. This implies that it may form apatite in the living body and bond to living bone through the apatite layer. This type of bioactive Ce-TZP/Al2O3 composite is therefore expected to be useful as a bone substitute, even under load-bearing conditions.

Aluminum↗

PubMed2002

Effect of water treatment on the apatite-forming ability of NaOH-treated titanium metal.

NaOH and heat treatments of titanium metal induce an apatite-forming ability on the metal by producing a bioactive graded sodium titanate structure on its surface. An enhancement of the apatite-forming ability of titanium metal induced by the NaOH treatment was attempted by conjoining the water and heat treatments. These treatments are assumed to convert the sodium titanate into anatase, which is presumed to be more effective for apatite nucleation. The sodium titanate gel on the metal formed from the NaOH treatment was shown to transform into anatase by a simple immersion in pure water, with subsequent heat treatments. Forming anatase on the metal significantly improved the apatite-forming ability of the metal in a simulated body fluid (SBF). The apatite-forming ability correlated directly with the amount of anatase on the metal. It is therefore expected that bioactive titanium metal and its alloys with a higher bone-bonding ability can be obtained with the use of the water and subsequent heat treatments after the NaOH treatment.

Apatites↗

PubMed1993

Apatite formation on three kinds of bioactive material at an early stage in vivo: a comparative study by transmission electron microscopy.

Apatite formation on the surface of three kinds of bioactive material at an early stage after implantation in bone was studied using transmission electron microscopy (TEM). The materials were apatite- and wollastonite-containing glass-ceramic (A-W GC) as a surface-active glass-ceramic, dense sintered hydroxyapatite (HA) as a surface-active ceramic, and dense sintered beta-tricalcium phosphate (beta-TCP) as a resorbable ceramic. Particles of these materials, ranging from 100-300 microns in diameter, were implanted into rat tibiae, and specimens were prepared at 3, 7, 10, and 14 days after implantation. For A-W GC, dissolution of the glassy and probably wollastonite phase was observed in the surface region on and after the third day, and a collagen-free thin apatite layer on the surface of the material was evident on and after the seventh day. This apatite layer was observed before the mineralization of the surrounding bone matrix and was sometimes evident even where the material bordered on the bone marrow. On and after the tenth day, the surrounding bone matrix calcified and A-W GC-bone bonding through an apatite layer was completed. For HA, a mineralized collagen-free layer was observed on the surface of the ceramic on and after the tenth day. This layer was always present near calcifying bone and it was difficult to distinguish from immature bone. For beta-TCP, such a surface mineralized layer was rarely evident, even just before bone-ceramic contact, and finally the bone bonded to beta-TCP directly. Cell-mediated degradation of beta-TCP was frequently observed.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

PubMed2004

Preparation of different forms of titanium oxide on titanium surface: effects on apatite deposition.

Methods of preparing different types of titanium oxide (TiO(2)) and their effects on apatite deposition and adhesion on titanium surfaces were investigated. Forty-eight commercially pure titanium (Ti) discs were divided into four groups (12 per group) and each group was subjected to the following treatments: Group 1, heat treatment at 750 degrees C; Group 2, oxidation in H(2)O(2) solution followed by heat treatment; Group 3, dipping in rutile/gelatin slurry; and Group 4, dipping in anatase/gelatin slurry. Surface-treated Ti discs were immersed in a supersaturated calcium phosphate solution to allow apatite deposition. Results showed that the percentage of area covered by deposited apatite was highest in Group 4 compared to the other groups. Apatite deposited on Ti discs pretreated in H(2)O(2) solution (Group 2) demonstrated the highest adhesion to the titanium substrate. Results from this study indicated that surface treatment method affects the type of TiO(2) layer formed (anatase or rutile) and affects apatite deposition and adhesion on the Ti surface.

Apatites↗

PubMed2005

Simple surface modification of poly(epsilon-caprolactone) to induce its apatite-forming ability.

A biodegradable polymer coated with a bone-like apatite layer on its surface is useful as a scaffold for bone tissue regeneration. In this work, a poly(epsilon-caprolactone) (PCL) surface was modified by an O2 plasma surface treatment to form oxygen-containing functional groups. The plasma-treated samples were subsequently dipped alternately in an alcoholic solution containing calcium ions and one containing phosphate ions to deposit apatite precursors on the surface. The surface-modified PCL samples formed a dense and uniform surface bone-like apatite layer after immersion for 24 h in a simulated body fluid with ion concentrations approximately equal to those of human blood plasma. This surface-modification process is applicable to two-dimensional PCL plates and three-dimensional PCL meshes. In the resulting apatite-PCL composite, the apatite layer strongly adhered to the PCL surface and remained intact after a tape-detachment test. Therefore, this type of composite material will be a useful scaffold for bone tissue engineering.

Absorbable Implants↗

PubMed2006

Phase evaluation of an effervescent-added apatitic calcium phosphate bone cement.

Development of macroporosity during setting would allow fast bone ingrowth and good osteointegration of the implant. The interconnected macropores could be created in calcium phosphate cements (CPCs) through the addition of an effervescent porogen mixture to the component of the cements. But this addition could also affect other characteristics of CPCs, such as setting time, mechanical strength, extent of conversion of reactant to apatite phase, crystallinity, and chemical composition of apatite lattice. In this study, these properties were investigated in an effervescent-added calcium phosphate bone cement. From 0 to 20 wt % of an effervescent mixture was added to calcium phosphate cement (CPC) components and phase evaluations were performed after 24 h incubation at 37 degrees C and 28% relative humidity and 1, 3, 7, and 14 days immersion in a specific simulated body fluid. XRD and FTIR techniques were used to characterize the cement composition, crystallinity, and chemical groups in final CPCs. The results showed that addition of effervescent porogen affects the extent of conversion of reactant to apatite phase and crystallinity. In other words, using the effervescent porogen in CPCs could accelerate the rate of conversion of TTCP/DCPA reactant to apatite phase with smaller crystallites, so that it was the predominant phase (about 67%) after only 3 days soaking in SBF solution. The content of carbonate groups substituted for phosphate groups in apatite lattice increased when the effervescent additive was further added. The compressive strength of the set calcium phosphate cement decreased significantly with the addition of the effervescent agent and reached from 8 MPa for additive-free CPC to 1.3 MPa for 20% effervescent-added CPC. The compressive strength was improved after 3 days immersing of CPC in the simulated body fluid solution.

Apatites↗

PubMed1992

The role of magnesium on the structure of biological apatites.

X-ray diffraction, infrared absorption spectroscopy, and chemical investigation have been carried out on deproteinated samples of turkey leg tendon at different degrees of calcification. The inorganic phase consists of poorly crystalline B carbonated apatite. On increasing calcification, the apatite crystal size, as well as its thermal stability, increase while the relative magnesium content is reduced. On the other hand, synchrotron X-ray diffraction data clearly indicate that apatite lattice parameters do not change as the crystals get larger. At the last stage of calcification the crystal size, chemical composition, and thermal conversion of the apatite crystallites approximate those of bone samples, which have been examined for comparison. The results provide a quantitative relationship between relative magnesium content and extent of apatite conversion into B-tricalcium phosphate by heat treatment. Furthermore, they suggest that the smaller crystallites laid down inside the gap region of the collagen fibrils are richer in magnesium than the longer ones that fill the space between collagen fibrils.

Animals↗

PubMed1980

Ultrastructural study of apatites in human urinary calculi.

Using transmission and scanning electron microscopy, we have studied the ultrastructure of a number of urinary calculi, mainly composed of calcium phosphate. Three fundamental kinds of calcium phosphates were detected: nonstoichiometric carbonate apatite, nonhexagonal octacalcium phosphate, and calcium-magnesium whitlockite. The influence that the organic matter, substitutions in the phosphate lattice of CO3 and Mg, and apatitic stoichiometry have on the ultrastructure of the calcium phosphate calculi has been detailed. An originating apatitic unity named U2 is assumed to be the responsible for all the different structures of calcium apatites appearing in renal calculi. On the basis of our observations, a mechanism whereby apatites grow is postulated; magnesium functions as an inhibitor for the growing mechanism.

Apatites↗

PubMed1986

Magnesium in tooth enamel and synthetic apatites.

The literature on how Mg is present in tooth enamel and on the incorporation of Mg in synthetic apatites is reviewed. Then a theoretical consideration is given on the basis of ionic radii about the incorporation of Mg in F-, Cl- and OH-apatite. Finally, the results are given of experiments on the incorporation of Mg in fluor, chlor, hydroxy, and carbonate apatite. It appears that the extent of incorporation of Mg in the apatite lattice, if at all, is very limited and that Mg in tooth enamel is to a very limited extent incorporated in the apatite lattice, the main portion being surface bound or present in a separate phase.

Apatites↗

PubMed2005

From biomimetic apatites to biologically inspired composites.

Hydroxyapatite is an elective material for bone substitution. In this outline of our recent activity the crucial role of nanostructured ceramics in the design and preparation of ceramic scaffolds will be described, focussing on our more recent interest in biomimetic apatites, in particular apatites containing HPO42- CO32- and Mg2+ which are similar to the mineral component of bone. The paper describes such nanostructured products and, in particular, innovative synthetic techniques capable of yielding powders with higher reactivity and bioactivity. However, so far the characteristics of artificial bone tissues have been shown to be very different from those of natural bone, mainly because of the absence of the peculiar self-organizing interaction between apatites and the protein component. This causes modification of the structure of apatites and of the features of the overall composite forming human bone tissue. Therefore, attempts to mimic the features and structure of natural bone tissue, leading toward so-called bio-inspired materials, will be speculated upon. New techniques used to reproduce a composite in which a nanosize blade-like crystal of hydroxyapatite (HA) grows in contact with self-assembling fibres of natural polymer will be presented. In this specific case, the amazing ability of biological systems to store and process information at the molecular level, nucleating nanosize apatites (bio-inspired material), is exploited.

Animals↗

PubMed2000

Anionic effects on the size and shape of apatite crystals grown from physiological solutions.

Comparatively little is known of the role tissue fluid electrolytes have in establishing the size and shape of apatite crystals deposited in skeletal tissues. In vitro accretion experiments using synthetic apatite seed crystals comparable in size to bone apatite were performed to assess the extent to which these crystalline features may be affected by direct electrolyte/mineral interactions. A constant composition method was used to maintain the accretion reactions under physiological-like solution conditions (1.33 mmol/liter Ca(2+), 1.0 mmol/liter total inorganic phosphate, (0 or 26) mmol/liter carbonate, 270 mmol/kg osmolality, pH 7.4, 37 degrees C). When the mass of the new accretions equaled the initial seed mass, the solids were harvested and the net change in crystal size resulting from the new accretions was assessed by X-ray diffraction line-broadening analysis. All the electrolytes examined in this study inhibited the accretion rate. The order of effectiveness was phosvitin > polyaspartate approximately polyglutamate > 1-hydroxyethylidene-1,1-bisphosphonate (HEBP) > bovine serum albumin (BSA) > citrate. Citrate and BSA also reduced the mean crystal size of the harvested solids compared with those harvested in the absence of added electrolyte, a finding that suggests that citrate and BSA suppressed growth of the seed crystals in favor of the proliferation of new smaller crystals. In contrast, a net increase in size following accretion compared with controls suggests that the other more strongly inhibiting electrolytes stimulated growth of the primary seed crystals and/or of the secondary crystals. These size changes, however, were anisotropic, with the anions effecting primarily increases in crystal width/thickness rather than in length. The effects were also more pronounced in the presence of carbonate. Our findings suggest that the strength of the interaction with the crystal surface may be relatively more important than molecular size or conformational complexity in establishing the effect that electrolytes have on apatite growth and proliferation. The results also suggest that adsorbed electrolytes may be a significant factor in controlling the size of apatite crystals in skeletal tissues by inducing proliferation of new crystals and/or affecting crystal shape by selectively modifying growth of the lateral dimensions.

Animals↗

PubMed1996

X-ray diffraction, electron microscopy, and Fourier transform infrared spectroscopy of apatite crystals isolated from chicken and bovine calcified cartilage.

Apatite crystals of the calcified zone of the subarticular cartilaginous growth plates of the long bones of young growing chickens and calves were isolated by low temperature reaction with hydrazine and plasma ashing and examined by electron microscopy, electron diffraction and microprobe analysis, and computer-generated deconvolution of the spectra obtained by Fourier transform infrared spectroscopy. The crystal habit was that of wide, very thin, relatively long rectangular plates, which tended to form small clusters of crystals, possibly because reaction with hydrazine alone did not remove all of the organic matrix constituents. Further reaction with low power plasma ashing released more of the isolated crystals although to a lesser extent than was possible with bone. Stereograms of the small clusters showed that many of the crystals in the small isolated aggregates of crystals were bent and/or curved. Together with the resultant overlap of individual adjacent crystals, they also produced images of sharp, very dense lines, reminiscent of the electron-dense needle or rod-like appearances frequently observed by transmission electron microscopy of thin sections of calcified cartilage and thought to represent the habit of the apatite crystals. No true rod or needle-like crystals were observed in the isolated crystals. Although the overall general apatitic structure of the apatite crystals was similar to that of the apatitic crystals of bone, the individual crystals were significantly larger than those of bone from the same specimen, and there were small but significant differences in the concentrations of acid phosphate and carbonate groups and in their short range order.

Animals↗