PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Graphite”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92Linked to original sources
PubMed2006

Graphitic nanofilms as precursors to wurtzite films: theory.

Periodic ab initio density functional calculations on ultrathin films of AlN, BeO, GaN, SiC, ZnO, and ZnS demonstrate the stabilization of thicker films terminating with the polar {0001} surface via charge transfer and metallization of the surface layers. In contrast thinner films remove the dipole by adopting a graphiticlike structure in which the atoms are threefold coordinate. This structure is thermodynamically the most favorable for these thinner films. Implications for the crystal growth of wurtzite materials are discussed.

Journal Article↗
PubMed2005

Atomic imaging in EBCO superconductor films by an X-ray holography system using a toroidally bent graphite analyzer.

X-ray fluorescence holography (XFH) is a new technique enabling the determination of the three-dimensional local atomic structure around a certain element. This method has been applied to analyze the local structure around Cu in 300 nm thin films of EuBa(2)Cu(3)O(7-delta) (EBCO) epitaxially grown on MgO (100) substrate, using the newest system for XFH measurement and high-brilliance synchrotron radiation at SPring-8. Here, the results of a study on the irradiation effect on the local atomic structure of EBCO superconductor with XFH measurements are presented.

Crystallography↗
PubMed2006

Interference effect of iron on the determination of gold in geological samples using the vapor generation technique and preconcentration in a graphite furnace.

A vapor generation procedure for the production of volatile species of Au was studied using electrothermal atomic absorption spectrometry (ETAAS). The interference effects of iron in solution and in the gas phase in a quartz T-tube were studied for the first time in detail. A dual vapor generation system was used for a single heated quartz tube atomizer, so that it was possible to study interferences and classify them regarding their origins. Results show that both gas-phase and liquid-phase interferences are present. It was also concluded that since the total interference effect causes the Au signal to be lower as compared to only the presence of gas-phase interactions in the experiment, the net liquid-phase interference from Fe should be suppressed. The method described in this study was used for the determination of gold in an ore reference material, Carlin Ore Mine, for the purpose of demonstrating the ability of the reported method to determine Au without any extraction procedure.

Journal Article↗
PubMed2003

A new lead(II)-selective PVC-coated graphite rod electrode based on a Schiff base complex.

A new lead(II)-selective electrode has been developed based on bis(acetylacetone)-p-phenylenediamine-lead(II) [LPb(NO3)2]H2O complex ionophore as a sensing material, dioctylphthalate (DOP) as a solvent mediator and PVC as a matrix. This electrode exhibits a linear Nernstian response over the concentration range of 1 x 10(-5)-1 x 10(-1) mol l(-1) of Pb(II) cation, with a cationic calibration slope of 30.0 +/- 0.2 mV/concentration decade and a detection limit of 2 x 10(-6) mol l(-1) (0.40 ppm). It has a fast response time and can be used for a period of 2 months without any divergence in potentials. The proposed electrode reveals a good selectivity for Pb(II) over a wide variety of other tested cations and could be used in the pH range of 4-8. It was successfully used for direct determination of Pb(II) concentration in some samples. The obtained results show a good agreement with those obtained by an atomic absorption spectrometric method. The average recovery obtained is 96.5 +/- 0.5% with standard deviation of 1.2% (n = 8).

Journal Article↗
PubMed2004

Large-volume injection electrothermal AAS combined with tungsten-treated pyrolytic graphite furnace: determination of cadmium in tap, snow and river water samples with phosphate modifier.

A large-volume (100 microl) injection-ETAAS with W-treated PG furnace combined with a phosphate modifier was applied to the determination of unpolluted levels of Cd in tap, snow and river-water samples. The limit of detection of 1.1 ng l(-1) was observed for a 4 w/v% NH4H2PO4 modifer. Matrix interference studies were tested for major ion species well found in fresh water. The direct determination of Cd in certified river water (12 +/- 2 ng l(-1)) was carried out and the observed value was in agreement with the certified one. The good recoveries of Cd added to real environmental water samples were also observed. This method was applied to the determination of Cd in unpolluted environmental water samples.

Journal Article↗
PubMedDate not supplied

Fast determination of lead and copper in dairy products by graphite furnace atomic absorption spectrometry.

A rapid and direct procedure for determining lead and copper in dairy products by electrothermal atomic absorption spectrometry (ETAAS) is described. Samples are slurried in a medium containing 50% v/v hydrogen peroxide, 1% v/v nitric acid, 0.5% w/v dihydrogen phosphate, and 20% v/v ethanol and directly injected into the furnace with no previous mineralization. Calibration is performed with aqueous standards. Limits of determination were 0.4 and 2.4 ng/mL for copper and lead, respectively. The reliability of the procedure was checked by comparison with the acid mineralization procedure and by analyzing 3 certified reference milk samples.

Calibration↗
PubMedDate not supplied

Determination of lead and cadmium in ceramicware leach solutions by graphite furnace atomic absorption spectroscopy: method development and interlaboratory trial.

This method was developed to improve sensitivity and eliminate time consuming, evaporative pre-concentration in AOAC Method 973.82 and American Society for Testing and Materials method C738 for testing foodware. The method was developed using leach solutions obtained by leaching 9 differently decorated ceramic vessels with 4% acetic acid for 24 h at room temperature. Lead and cadmium concentrations in leach solutions were 0.005-17,600 and 0.0004-0.500 microg/mL, respectively. Concentrations were determined using peak area, phosphate chemical modifier (8.3 microg PO4(-3)), and a standard curve for quantitation. Optimized pre-atomization and atomization temperatures were 1,300 and 1,800 degrees C, respectively, for Pb and 1,100 and 1,700 degrees C, respectively, for Cd. Characteristic masses (mo) were 10 and 0.4 pg for Pb and Cd, respectively. Precision of repeated analyses of calibration solutions was < or =3% relative standard deviation. Precision of duplicate leach solution analyses on different days was 0-9% relative difference. Recovery from fortified leach solutions was 96-106%. Results obtained by this method agreed 92-110% with those of confirmatory analyses. Results of certified reference material solutions agreed 94-100% with certificate values. Pb and Cd limits of quantitation (LOQ) were 0.005 and 0.0005 microg/mL, respectively. Results from 3 trial laboratories for 4 leach solutions containing Pb and Cd concentrations of 0.017-1.47 and <0.0005-0.0864 microg/mL, respectively, agreed 89-102% with results of the author. Two attributes of this method were noteworthy: (1) Background absorbance due to organic matter was entirely absent from atomization profiles, making the use of short pre-atomization hold times (2 s) possible. (2) Instrument precision was excellent and only one determination per solution was needed. Acceptance criteria for quality control measurements and a practical procedure for estimating the method LOQ during routine regulatory analyses are described.

Acetic Acid↗