SEARCH · PubMed Health

Results for “surface modification”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93Linked to original sources

PubMed2005

Electronic and chemical properties of nanostructured cerium dioxide doped with praseodymium.

Nanostructured doped ceria is a prospective material for catalytic applications such as the construction of membranes with mixed electronic and ionic conductivity for effective syngas production. In this article, the surface properties of nanostructured ceria doped with praseodymium have been studied by X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and Fourier transform infrared spectroscopy of adsorbed carbon monoxide. The effects of supporting 1.4 wt % Pt as well as structural changes upon the reduction of the samples with methane have been investigated. While in samples without supported platinum, mainly praseodymium cations are reduced in a methane atmosphere; stronger reduction of cerium cations was found in the case of surface modification with Pt. The structural differences correlate with results from temperature-programmed reaction experiments with methane. Explanations are discussed in terms of different reaction mechanisms.

Journal Article↗

PubMed2005

Preparation and electrochemical hydrogen storage of boron nitride nanotubes.

Boron nitride (BN) nanotubes were synthesized through chemical vapor deposition over a wafer made by a LaNi5/B mixture and nickel powder at 1473 K. Scanning electron microscopy, transmission electron microscopy, energy-dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were performed to characterize the microstructure and composition of BN nanotubes. It was found that the obtained BN nanotubes were straight with a diameter of 30-50 nm and a length of up to several microns. We first verify that the BN nanotubes can storage hydrogen by means of an electrochemical method, though its capacity is low at present. The hydrogen desorption of nonelectrochemical recombination in cyclic voltammograms, which is considered as the slow reaction at BN nanotubes, suggests the possible existence of strong chemisorption of hydrogen, and it may lead to the lower discharge capacity of BN nanotubes. It is tentatively concluded that the improvement of the electrocatalytic activity by surface modification with metal or alloy would enhance the electrochemical hydrogen storage capacity of BN nanotubes.

Journal Article↗

PubMed2005

Stoichiometry-dependent formation of quantum dot-antibody bioconjugates: a complementary atomic force microscopy and agarose gel electrophoresis study.

The unique advantages of quantum dot (QD) bioconjugates have motivated their application in biological assays. However, physical characterization of bioconjugated QDs after surface modification has often been overlooked. Here, biotinylated antibodies (biotin-IgG) were attached to commercial streptavidin-conjugated quantum dots (strep-QDs) at different stoichiometric ratios, and these QD bioconjugates were characterized with atomic force microscopy and discontinuous sodium dodecyl sulfate agarose gel electrophoresis (SDS-AGE). The results from these complementary analytical techniques showed that the molar ratio determined the relative sizes, molecular weights and morphologies of the QD bioconjugates. Additionally, the novel discontinuous SDS-AGE analysis confirmed specific binding between biotin-IgG and strep-QDs. Researchers who design QD bioconjugates for cell-based assays should consider stoichiometry-dependent differences in the physical properties of their QD bioconjugates.

Antibodies↗

PubMed2006

Layered double hydroxide-CdSe quantum dot composites through colloidal processing: effect of host matrix-nanoparticle interaction on optical behavior.

Layered double hydroxide (LDH)-monodispersed 4-nm CdSe nanoparticle composites were prepared through restacking of layers of colloidally dispersed delaminated LDH in the presence of CdSe nanoparticles in 1-butanol. The composites exhibit a blue shift for CdSe absorption, which increases with a decrease in nanoparticle content. The observed blue shift is due to the interaction of the quantum dots with the LDH layers, which leads to surface modification of the nanoparticles.

Journal Article↗

PubMed2006

FTIR spectroscopy of alcohol and formate interactions with mesoporous TiO2 surfaces.

The effects of pH and ultraviolet (UV) light with ligated formic acid on mesoporous TiO2 were characterized by transmission Fourier transform infrared (FTIR) spectroscopy and compared with adsorbed formate complexes. Surface-modified anatase thin films were prepared from acidic aqueous nanoparticulate anatase suspensions diluted with methanol and ethanol. Bands assigned to carboxylic acid groups displayed unique bonding character in the ligated formic acid on the anatase surface. For increased proton concentrations in the films, separation in -COO stretching bands (delta nu) for formic acid increased (increase in frequency for nuC=O and decrease in frequency for nuC-O). With UV exposure, surface-bound organics were rapidly removed by photocatalytic oxidation at 40 degrees C and 40% relative humidity (RH). In addition, the delta nu of the formic acid bands decreased as organics were mineralized to carbonates and CO2 with UV light. Aqueous formic acid adsorption experiments showed a distinctly different bonding environment lacking carbonate, and the delta nu for the carboxylic groups indicated a bridging bidentate coordination. The delta nu of the bands increased with increasing proton concentration, with both bands shifting to higher wavenumbers. The shifts may be ascribed to the influence of protonation on surface charge and the effect of that charge on the electronegativity of carboxylate groups bound to the surface. As alcohols are used in the mesoporous TiO2 solar cell preparation, implications of these surface modifications to dye-sensitized photovoltaics are discussed.

Journal Article↗

PubMed2004

Preparation and characterization of n-alkanoic acid self-assembled monolayers adsorbed on 316L stainless steel.

The electrochemical formation and characterization of decanoic, myristic, palmitic, and stearic acid self-assembled monolayers on a native oxide surface of 316L stainless steel have been studied. This work describes a new approach to surface modification of stainless steel in which the self-assembly of n-alkanoic acids is facilitated by applying a potential to the stainless steel in an organic electrolyte solution. While decanoic acid forms a disorganized monolayer as a result of sweeping the potential in an acetonitrile solution containing 0.1 mM of the respective acid, longer acids, that is, myristic and palmitic acids, form highly ordered closed-packed monolayers. This electrochemical approach results in highly reproducible monolayers that are deposited within a shorter time than the traditional assembly process. The monolayers were characterized by cyclic voltammetry, double-layer capacity (ac voltammetry), contact angle measurements, X-ray photoelectron spectroscopy, and external reflection-absorption Fourier transform infrared spectroscopy. The utilization and implications of this modification technique are discussed.

Journal Article↗

PubMed2005

Physicochemical and interfacial investigation of lipid/polymer particle assemblies.

A model study was investigated to develop colloidal supramolecular assemblies consisting of particles coated with lipid layers. The interactions between monodisperse sulfate-charged poly(styrene) submicrometer particles and zwitterionic/cationic lipid vesicles composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and 1,2-dipalmitoyl-3-trimethylammonium propane were considered. The influence of relevant experimental parameters on the final associations was examined by quasi-elastic light scattering to point out some new phenomena occurring in these colloidal systems. The major role of electrostatic interactions as driving forces to control the organization between cationic lipids and oppositely charged poly(styrene) particles was clearly evident, whereas this influence was less pronounced when considering the zwitterionic lipids. The characterization of these original complex assemblies was completed by a thorough study of the surface modification. The combination of zeta potential measurements, X-ray photoelectron spectroscopy analyses, and microscopy observations proved that the envisioned model can really correspond to polymer particles surrounded by lipids.

Journal Article↗

PubMed2005

Particle-induced phase separation in mixed polymer solutions.

The influence of added colloidal particles on the phase separation of mixed aqueous polymer solutions is investigated. Two types of particles (polystyrene latex or silica) and different combinations of segregating polymers (dextran of varying molar mass combined with poly(ethylene oxide) (PEO) of varying molar mass, or Ucon, a copolymer of ethylene oxide and propylene oxide) were used. All systems displayed particle-induced instability effects, but the extent of the effect varied strongly between the various combinations and with the amount of added salt. Very large instability effects were seen in certain mixtures. Two mechanisms, both relying on the adsorption of at least one of the polymers to the particle surface, seem to operate. Close to the cloud-point curve of the particle-free polymer1/polymer2/water mixture, adsorption of PEO or Ucon to the particles gives rise to a capillary-induced phase separation. Close to the dextran/water axis of the phase diagram, the adsorbing polymer gives rise to a surface modification of the particles, which then interacts repulsively with the surrounding dextran solution.

Journal Article↗

PubMed2004

Ultrathin binary grafted polymer layers with switchable morphology.

Polymer surface layers comprised of mixed chains grafted to a functionalized silicon surface with a total layer thickness of only 1-3 nm are shown to exhibit reversible switching of their structure. Carboxylic acid-terminated polystyrene (PS) and poly (butyl acrylate) (PBA) were chemically attached to a silicon surface that was modified with an epoxysilane self-assembled monolayer by a "grafting to" routine. While one-step grafting resulted in large, submicron microstructures, a refined, two-step sequential grafting procedure allowed for extremely small spatial dimensions of PS and PBA domains. By adjusting the grafting parameters, such as concentration of each phase and molecular weight, very finely structured surfaces resulted with roughly 10-nm phase domains and less than 0.5-nm roughness. Combining the glassy PS and the rubbery PBA, we implemented a design approach to fabricate a mixed brush from two immiscible polymers so that switching of the surface nanomechanical properties is possible. Post-grafting hydrolysis converted PBA to poly(acrylic acid) to amplify this switching in surface wettability. Preliminary tribological studies showed a difference in wear behavior of glassy and rubbery surface layers. Such switchable coatings have practical applications as surface modifications of complex nanoscale electronic devices and sensors, which is why we restricted total thickness for potential nanoscale gaps.

Journal Article↗

PubMed2004

Integrated lithographic membranes and surface adhesion chemistry for three-dimensional cellular stimulation.

The complex spatiotemporal organization of cellular and molecular interactions dictates the physiological function of cells. These behaviors are indications of an integrated response to a three-dimensional cellular environment and anchored in cell adhesion on scaffolds. Here, we are able to control interconnected structural, mechanical, and chemical stimuli by dictating the cellular environment through chemical surface modifications, soft lithography, and mechanical deformation. Control of these variables is obtained through the use of an elastomeric membrane chemically modified for cell adhesion with a pressure-driven cell-stretching device which creates a pattern of forces similar to those encountered in physiological environments. Further, the integration of lithographic methods and chemical patterning allows the introduction of space- and time-dependent parameters by combining mechanical stimulation, biochemical regulation, and scaffolding design. The method is applied to stimulate single cells and cell populations to examine cellular response with spatiotemporal control. This research provides the capacity to probe biological patterns and tissue formation under the influence of mechanical stress.

Animals↗

PubMed2004

Biosensing properties of diamond and carbon nanotubes.

The biochemical properties of boron-doped diamond (BDD), carbon nanofiber, fullerene, and multiwalled carbon nanotube (MWCNT) electrodes have been investigated comparatively. Physiochemical factors which affect the biosensing properties such as surface hydrophobicities, effective surface area, and intrinsic material properties are studied. Voltammetric responses of the as-grown thin film electrode and surface-modified electrode to biomolecules such as L-ascorbic acid (L-AA), dopamine (DA), and uric acid are examined. As-grown MWCNT electrodes exhibit selective voltammetric responses to the different biomolecules and faster electron-transfer kinetics compared to BDD. The selective response is due to the considerably lower anodic potential of L-AA on MWCNT (-48 mVvs Ag/AgCl compared to 575 mV on BDD). This electrocatalytic response can be replicated on a nonselective carbon nanofiber electrode by coating it with gold nanoparticles. BDD has no intrinsic selective response to L-AA, and surface modification by anodic polarization is necessary for resolving L-AA and DA.

Ascorbic Acid↗

PubMed2005

Surface and capillary forces encountered by zinc sulfide microspheres in aqueous electrolyte.

The colloid probe technique was used to investigate the interactions between individual zinc sulfide (ZnS) microspheres and an air bubble in electrolyte solution. Incorporation of zinc ions into the electrolyte solution overcomes the disproportionate zinc ion dissolution and mimics high-volume-fraction conditions common in flotation. Determined interaction forces revealed a distinct lack of long-ranged hydrophobic forces, indicated by the presence of a DLVO repulsion prior to particle engulfment. Single microsphere contact angles were determined from particle-bubble interactions. Contact angles increased with decreasing radii and with surface oxidation. Surface modification by the absorption of copper and subsequently potassium O-ethyldithiocarbonate (KED) reduced repulsive forces and strongly increased contact angles.

Journal Article↗

PubMed2005

Porcine gastric mucin (PGM) at the water/poly(dimethylsiloxane) (PDMS) interface: influence of pH and ionic strength on its conformation, adsorption, and aqueous lubrication properties.

We have investigated the influence of pH and ionic strength on the conformation of porcine gastric mucin (PGM) in bulk aqueous solution, its adsorption behavior onto poly(dimethylsiloxane) (PDMS) surfaces, and its lubricating behavior upon the self-mated sliding contact of a PDMS tribopair by means of circular dichroism (CD) spectroscopy, optical waveguide lightmode spectroscopy (OWLS), and pin-on-disk tribometry, respectively. In a low-concentration regime (1 mg/mL), where the formation of a mucus-gel is generally excluded, PGM is still observed to exhibit effective aqueous lubricating properties under specific conditions of acidic pH and low ionic strength. This behavior was closely correlated with specific conformations in the bulk solution as well as specific adsorption behavior at the water/PDMS interface. The lubrication mechanism of the self-mated sliding contact of PDMS by means of surface modification with PGM is discussed in terms of isoviscous-elastic/soft-elastohydrodynamic lubrication (soft-EHL).

Adsorption↗

PubMed2006

Solution-phase synthesis of spherical zinc sulfide nanostructures.

A facile solution-phase method has been developed to synthesize specially hollow and solid ZnS nanospheres. High-resolution TEM images on the nanospheres suggest their formation via the oriented aggregation of the primary ZnS nanocrystals. The morphology and size of the ZnS nanospheres can also be tuned easily by controlling the experimental conditions. These special spherical structures are very easily encapsulated within a uniform silica layer without any surface modification, suggesting potential applications in biochemistry and biodiagnostics.

Journal Article↗

PubMed2006

Polystyrene-silica nanocomposite particles via alcoholic dispersion polymerization using a cationic azo initiator.

Submicrometer-sized polystyrene-silica nanocomposite particles have been prepared by alcoholic dispersion polymerization of styrene using commercial alcoholic silica sols of 13 or 22 nm diameter as the sole stabilizing agent. The key to the formation of colloidally stable nanocomposite particles is the selection of a cationic azo initiator (use of nonionic or anionic initiators leads either to the formation of silica-stabilized polystyrene latex particles with very low silica contents or to the precipitation of polystyrene, respectively). Neither surface modification of the silica sol nor the addition of surfactant or polymeric stabilizers is required for successful nanocomposite syntheses. The purified polystyrene-silica nanocomposite particles have relatively narrow particle size distributions, with mean diameters ranging from 331 to 464 nm as judged by disk centrifuge photosedimentometry. Thermogravimetric analyses indicated mean silica contents of 13-26 wt. %, depending on the synthesis conditions. Calcination of the polystyrene-silica nanocomposite particles leads to the formation of hollow silica shells, which indicates a well-defined core-shell morphology for the original nanocomposite particles.

Journal Article↗

PubMed2007

Thermoresponsive coatings strongly adhering to (semi)conducting surfaces.

Thermoresponsive brushes have been efficiently grafted onto (semi)conductive surfaces by a two-step process. In the first step, poly(N-succinimidyl acrylate) chains have been chemisorbed onto silicon or stainless steel by the electrografting method. Then, these modified electrodes were immersed in isopropylamine in order to transform the grafted chains to the thermoresponsive poly(N-isopropyl acrylamide). The thermal response of these brushes has been shown by AFM. This straightforward grafting process is quite attractive for surface modification in confined media and is thus promising for microfludics application.

Journal Article↗

PubMed2006

Covalent gluing and postgluing of Langmuir-Blodgett monolayers at hydrocarbon surfaces.

Langmuir-Blodgett (LB) monolayers of 5,11,17,23,29,35-hexaformyl-37,38,39,40,41,42-hexakis(1-n-octyloxy)calix[6]arene (2), deposited onto silylated silicon wafers, were cross-linked (i.e., "covalently glued") via Schiff base formation with poly(allylamine). Direct evidence for imine formation was obtained from X-ray photoelectron spectroscopy and from attenuated total reflection IR spectroscopy. These modified surfaces could be removed from the aqueous subphase into air with retention of the assembly and its orientation relative to the surface, as evidenced by atomic force microscopy, water contact angle measurements, and film thickness determinations by ellipsometry. Similar assemblies were also synthesized via a postgluing procedure, in which the substrate containing the LB monolayer was removed from the subphase and rapidly immersed into an aqueous solution containing poly(allylamine). The potential of combining postgluing methods with continuous LB film deposition as a surface modification technique is briefly discussed.

Journal Article↗

PubMedDate not supplied

Poly(ethylene oxide)-modified poly(beta-amino ester) nanoparticles as a pH-sensitive system for tumor-targeted delivery of hydrophobic drugs. 1. In vitro evaluations.

A representative poly(beta-amino ester) (PbAE) with biodegradable and pH-sensitive properties was used to formulate a nanoparticle-based dosage form for tumor-targeted paclitaxel delivery. The polymer undergoes rapid dissolution when the pH of the medium is less than 6.5 and hence is expected to release its contents at once within the acidic tumor microenvironment and endo/lysosome compartments of cells. PbAE nanoparticles were prepared by solvent displacement method and characterized for particle size, charge, and surface morphology. Pluronic F-108, a triblock copolymer of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), was blended with PbAE to induce surface modification of the nanoparticles. In vitro cellular uptake of tritiated [(3)H]-paclitaxel in solution form and as a nanoparticulate formulation was studied in MDA-MB-231 human breast adenocarcinoma cells grown in 12-well plates. We also examined the intracellular degradation pattern of the formulations within the cells by estimating the drug release profile. Cytotoxicity assay was performed on the formulations at different doses and time intervals. Nanoparticles prepared from poly(epsilon-caprolactone) (PCL) that do not display pH-sensitive release behavior were used as control. Spherical nanoparticles having positive zeta potential ( approximately 40 mV) were obtained in the size range of 150-200 nm with PbAE. The PEO chains of the Pluronic were well-anchored within the nanomatrix as determined by electron spectroscopy for chemical analysis (ESCA). The intracellular accumulation of paclitaxel within tumor cells was significantly higher when administered in the nanoparticle formulations as compared to aqueous solution. Qualitative fluorescent microscopy confirmed the rapid release of the payload into the cytosol in the case of PbAE nanoparticles, while the integrity of the PCL nanoparticles remained intact. The cytotoxicity assay results showed significantly higher tumoricidal activity of paclitaxel when administered in the nanoparticle formulations. The cell-kill effect was maximal for paclitaxel-loaded PbAE nanoparticles when normalized with respect to intracellular drug concentrations. Thus, PEO-modified PbAE nanoparticles show tremendous potential as novel carriers of cytotoxic agents for achieving improved drug disposition and enhanced efficacy.

Cell Line, Tumor↗