PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Biomimetic Materials”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
PubMed2003

Biomimetic materials for tissue engineering.

The development of biomaterials for tissue engineering applications has recently focused on the design of biomimetic materials that are capable of eliciting specific cellular responses and directing new tissue formation mediated by biomolecular recognition, which can be manipulated by altering design parameters of the material. Biomolecular recognition of materials by cells has been achieved by surface and bulk modification of biomaterials via chemical or physical methods with bioactive molecules such as a native long chain of extracellular matrix (ECM) proteins as well as short peptide sequences derived from intact ECM proteins that can incur specific interactions with cell receptors. The biomimetic materials potentially mimic many roles of ECM in tissues. For example, biomimetic scaffolds can provide biological cues for cell-matrix interactions to promote tissue growth, and the incorporation of peptide sequences into materials can also make the material degradable by specific protease enzymes. This review discusses the surface and bulk modification of biomaterials with cell recognition molecules to design biomimetic materials for tissue engineering. The criteria to design biomimetic materials such as the concentration and spatial distribution of modified bioactive molecules are addressed. Recent advances for the development of biomimetic materials in bone, nerve, and cardiovascular tissue engineering are also summarized.

Amino Acid Sequence↗
PubMed2004

Biomimetic materials and micropatterned structures using iniferters.

In the preparation of biomimetic materials it is often required that efficient methods of polymerization be used, often methods that can lead to biomimetic polymers with relatively narrow molecular weight distribution. Living radical polymerization techniques have successfully been used to create low polydispersity linear polymers by free-radical polymerizations. Although this technique slows down the polymerization of multifunctional monomers, there is little effect on the network structure due to the high concentration of pendent double bonds. There are applications of the living radical polymerization in the synthesis of block copolymers. Essentially, the technique involves polymerizing a single type of monomer first to create a macromonomer that is capable of acting as an initiator because of the reversible bond between the polymer end group and the terminating group. This terminating group may be a thiol or a halogen and, under the right conditions, will dissociate to form radicals. A second monomer is then added to the system and the polymerization proceeds with the second monomer chemically attached to the polymer of the first monomer. We review methods of creating biomimetic block copolymers using the iniferter radical polymerization technique. The block copolymers would be used in the synthesis of micropatterned polymer films for use in biomaterials and other biomedical applications.

Biomimetic Materials↗
PubMed2005

Bone matrix like assemblies of collagen: from liquid crystals to gels and biomimetic materials.

Skeletal tissues associate in close interaction, a dense organic matrix and a mineral network. In bone, the major structural protein is type I collagen, associated with inorganic crystals of hydroxyapatite. The three-dimensional arrangement of collagen fibrils in compact bone forms regularly ordered networks and a parallel was evidenced between these structures and molecular assemblies described in liquid crystals. Similar structures are now obtained in vitro. Indeed, when purified type I collagen is highly concentrated in an acid soluble state, the protein spontaneously assembles into ordered liquid crystalline phases. After a sol/gel transition triggered by pH increase, biomimetic materials are formed which resemble the exact compact bone matrix architecture over distances reaching centimetres and more. The properties of these highly ordered materials will be reviewed recalling their supramolecular arrangement and the corresponding patterns when visualised in polarised light microscopy (birefringence) and transmission electron microscopy (TEM). The association of inorganic phases (amorphous silica) to form chiral hybrid materials will also be described so as the behaviour of cells (fibroblast adhesion and migration) when seeded on these dense biomimetic matrices.

Biomimetic Materials↗
PubMed2002

In situ polymerization into porous ceramics: a novel route to tough biomimetic materials.

A hydroxyapatite-based biomimetic composite, which is henceforth referred to as a synthetic bony material with high toughness characteristics, was prepared. It was obtained from a hydroxyapatite (HAp) skeleton with a relative porosity fraction of approximately 32 vol %, prepared by cold-isostatic-press compaction, followed by a sintering process, leading to a hydroxyapatite structure containing percolated submicrometer porosity channels. The percolated pores were infiltrated with a liquid mixture of epsilon-caprolactam monomer and an initiator, before homogeneous in situ polymerization to 6-nylon within the fully percolated pore structure was induced thermally. The final composite consisted of a dense interpenetrated hydroxyapatite/6-nylon network in a fraction approximately 68/30 vol %. The work of fracture value of the hybrid composite was found to be comparable with those found in two natural materials (bovine femur and nacre), which were also investigated under the same testing conditions.

Journal Article↗
PubMed2001

Preparation of insect-cuticle-like biomimetic materials.

A model system of tanning of a protein matrix within a fibrous structure, such as most commonly found in insect cuticle, was developed, using the cellulose of paper in place of chitin. The paper was impregnated with a tripeptide, DOPA-Gly-Gly, or a protein (BSA) plus catechol and treated with tyrosinase to oxidize the catechol. The resulting material was waterproof and had very high wet strength. If the material was wetted and dried repeatedly its water retention decreased by a factor of at least 2.

Animals↗
PubMed2006

Micropatterning polyvinyl alcohol as a biomimetic material through soft lithography with cell culture.

Integrating inorganic materials with specific biological systems requires a complex set of properties that can mimic physiological function to create microchip devices. Several factors in the material including the spatial location of the cellular attachment heavily influence the control of this functionality and must be dictated to parallel in vivo characteristics. In this work, we demonstrate polyvinyl alcohol (PVA) for use in emulating these properties to produce a highly robust and functional biomaterial as a microchip. We show the utility of PVA for cellular patterning using soft lithography. Based on these results, PVA can be applied in a diversity of areas including tissue engineering, biomimetics, and cellular micropatterning.

Animals↗
PubMed2006

Dual-functional biomimetic materials: nonfouling poly(carboxybetaine) with active functional groups for protein immobilization.

We introduce a dual-functional biocompatible material based on zwitterionic poly(carboxybetaine methacrylate) (polyCBMA), which not only highly resists protein adsorption/cell adhesion, but also has abundant functional groups convenient for the immobilization of biological ligands, such as proteins. The dual-functional properties are unique to carboxybetaine moieties and are not found in other nonfouling moieties such as ethylene glycol, phosphobetaine, and sulfobetaine. The unique properties are demonstrated in this work by grafting a polyCBMA polymer onto a surface or by preparing a polyCBMA-based hydrogel. PolyCBMA brushes with a thickness of 10-15 nm were grafted on a gold surface using the surface-initiated atom transfer radical polymerization method. Protein adsorption was analyzed using a surface plasmon resonance sensor. The surface grafted with polyCBMA very largely prevented the nonspecific adsorption of three test proteins, that is, fibrinogen, lysozyme, and human chorionic gonadotropin (hCG). The immobilization of anti-hCG on the surface resulted in the specific binding of hCG while maintaining a high resistance to nonspecific protein adsorption. Transparent polyCBMA-based hydrogel disks were decorated with immobilized fibronectin. Aortic endothelial cells did not bind to the polyCBMA controls, but appeared to adhere well and spread on the fibronectin-modified surface. With their dual functionality and biomimetic nature, polyCBMA-based materials are very promising for their applications in medical diagnostics, biomaterials/tissue engineering, and drug delivery.

Adsorption↗
PubMed2001

Replacing and renewing: synthetic materials, biomimetics, and tissue engineering in implant dentistry.

Hundreds of thousands of implantations are performed each year in dental clinical practice. Dental implants are a small fraction of the total number of synthetic materials implanted into the human body in all fields of medicine. Basically, these millions of implants going into humans function adequately. But longevity and complications still are significant issues and provide opportunities for the creation of improved devices. This manuscript briefly reviews the history of dental implant devices and the concepts surrounding the word "biocompatibility." It then contrasts the foreign body reaction with normal healing. Finally, the article describes how ideas gleaned from the study of normal wound healing can be applied to improved dental implants. In a concluding section, three scenarios for dental implants twenty years from now are envisioned.

Bacterial Adhesion↗
PubMed1999

Evaluation of protein-modulated macrophage behavior on biomaterials: designing biomimetic materials for cellular engineering.

Macrophage is a central cell type in directing host inflammatory and immune processes; hence, its response to biomaterials (i.e. adhesion and giant cell formation) has a direct impact on material biostability and biocompatibility. In this paper, several in vitro and in vivo techniques from previously published results and current investigations are highlighted and presented to demonstrate means of delineating a part of the complex molecular mechanisms involved in the interaction between biomaterials and macrophages. Complement component C3 was found critical in mediating the initial adhesion of human macrophages on medical-grade polyetherurethaneureas. From radioimmunoassay studies, the presence of a diphenolic antioxidant additive in polyetherurethaneureas increased the propensity for complement upregulation but did not affect adherent macrophage density. The subcutaneous cage-implant system was utilized to confirm the role of interleukin-4 in the fusion of adherent macrophages to form foreign body giant cells on polyurethanes in vivo. To probe the function-structural relationship of macrophage-active proteins, fibronectin was employed as a model in the formulation of synthetic oligopeptide mimetics. Peptides were grafted onto previously developed, non-cell adhesive polyethyleneglycol-based networks. The results indicate that grafted tripeptide RGD sequence supported higher adherent macrophage density than surfaces grafted with other peptides such as PHSRN and PRRARV sequences. However, the formation of foreign body giant cells on peptide-grafted networks was highly dependent on the relative orientation between PHSRN and RGD sequences located in a single peptide.

Biocompatible Materials↗
PubMed2000

Design and synthesis of new biomimetic materials.

In this paper, it is reported that the histidine-silane derivative Boc-His(Boc)-CONH-(CH2)3Si(OEt)3 can be polymerized via the sol-gel method or can be grafted on a silica surface. The obtained organosilicas bear histidine molecules covalently bonded on the inorganic matrix. Their Cu(II) complexes have been evaluated as oxidation catalysts for the conversion of 3,5-di-tert-butylcatechol (DTBC) to 3,5-di-tert-butylquinone (DTBQ) in the presence of dioxygen.

Catalysis↗
PubMed1998

Design and Synthesis of New Biomimetic Materials by Sol-Gel: A Cu(II)(histidine)(2) Complex Covalently Bonded on a Silica Matrix.

The synthesis of a new histidine-silane derivative, Boc-His(Boc)-CONH-(CH(2))(3)Si(OEt)(3), is reported. Hydrolysis and co-condensation of this monomer with tetraethoxysilane, via the sol-gel procedure, results in a hybrid inorganic-organic material that bears histidine molecules covalently bonded on a silica matrix. 1D-ESEEM and 2D-HYSCORE studies of its Cu(II) complex show that the copper atom is coordinated by two inequivalent histidine imidazoles. The new Cu(II) material exhibits catalytic activity for DTBQ formation in the presence of dioxygen, with considerable turnover rates and yields. In addition it is highly recyclable and shows high specific surface area.

Journal Article↗
PubMedDate not supplied

Advance and prospect of bionanomaterials.

Over the past few years, bionanomaterial science has emerged as a new exciting field in which theoretical and experimental studies of structure and function of bionanomaterials have become a focus, and the importance of DNA, RNA, and peptides as bionanomaterials to the fundamental development in biology and nanomaterials has begun to be recognized. In particular, biochemistry, biophysics, biomechanics, thermodynamics, and electronic properties of DNA, RNA, and peptides, as well as intelligent composite biological materials, have become a new interdisciplinary frontier in life science and material science. There is an increasing need for a more systematic study of the basic issues involved in bionanomaterials and a more active participation of researchers in the application domain of such novel materials. Great advances have been and are being made in nanobiochip materials, nanoscale biomimetic materials, nanomotors, nanocomposite materials, interface biomaterials, and nanobiosensor and nano drug delivery systems, with enormous prospect in industrial, defense, and clinical medicine applications. Here we review some of the main advances in this field over the past few years, explore the application prospects, and discuss the concepts, issues, approaches, and challenges, with the aim of stimulating a broader interest in developing bionanomaterials technology.

Biocompatible Materials↗
PubMed2003

Study of the toughening mechanisms in bone and biomimetic hydroxyapatite materials using Raman microprobe spectroscopy.

A Raman microprobe spectroscopy characterization of microscopic fracture mechanisms is presented for a natural hydroxyapatite material (cortical bovine femur) and two synthetic hydroxyapatite-based materials with biomimetic structures-a hydroxyapatite skeleton interpenetrated with a metallic (silver) or a polymeric (nylon-6) phase. In both the natural and synthetic materials, a conspicuous amount of toughening arose from a microscopic crack-bridging mechanism operated by elasto-plastic stretching of unbroken second-phase ligaments along the crack wake. This mechanism led to a rising R-curve behavior. An additional micromechanism, responsible for stress relaxation at the crack tip, was recognized in the natural bone material and was partly mimicked in the hydroxyapatite/silver composite. This crack-tip mechanism conspicuously enhanced the cortical bone material resistance to fracture initiation. A piezo-spectroscopic technique, based on a microprobe measurement of 980 cm(-1) Raman line of hydroxyapatite, enabled us to quantitatively assess in situ the microscopic stress fields developed during fracture both at the crack tip and along the crack wake. Using the Raman piezo-spectroscopy technique, toughening mechanisms were assessed quantitatively and rationally related to the macroscopic fracture characteristics of hydroxyapatite-based materials.

Biocompatible Materials↗
PubMed2004

Biomimetic polymers in pharmaceutical and biomedical sciences.

This review describes recent developments in the emerging field of biomimetic polymeric biomaterials, which signal to cells via biologically active entities. The described biological effects are, in contrast to many other known interactions, receptor mediated and therefore very specific for certain cell types. As an introduction into this field, first some biological principles are illustrated such as cell attachment, cytokine signaling and endocytosis, which are some of the mechanisms used to control cells with biomimetic polymers. The next topics are then the basic design rules for the creation of biomimetic materials. Here, the major emphasis is on polymers that are assembled in separate building blocks, meaning that the biologically active entity is attached to the polymer in a separate chemical reaction. In that respect, first individual chemical standard reactions that may be used for this step are briefly reviewed. In the following chapter, the emphasis is on polymer types that have been used for the development of several biomimetic materials. There is, thereby, a delineation made between materials that are processed to devices exceeding cellular dimensions and materials predominantly used for the assembly of nanostructures. Finally, we give a few current examples for applications in which biomimetic polymers have been applied to achieve a better biomaterial performance.

Animals↗
PubMedDate not supplied

Layer-by-layer microfluidics for biomimetic three-dimensional structures.

Due to the complex structures of living systems, with size scales spanning from the micron to millimeter range, the use of microtechnology to recreate in vivo-like architecture has exciting potential applications. However, most microscale systems are two-dimensional, and few three-dimensional (3-D) systems are being explored. We have developed a versatile technique, combining surface engineering with layer-by-layer microfluidics technology, to create a 3-D microscale hierarchical tissue-like structure. The process involves immobilization of a cell-matrix assembly, cell-matrix contraction, and pressure-driven microfluidic delivery. An aminopropyltriethoxysilane-glutaraldehyde activated chip is used to effectively immobilize the cell-matrix assemblies while maintaining cell viability. Pressure-driven microfluidics is applied to transport cells-matrices with controlled flow rates, determined from dynamic flow imaging. By taking advantage of the contraction of the biopolymer matrices by cells, layer-by-layer microfluidics can be used to build multilayers of cell-matrix inside a microchannel and the thickness of each layer can be controlled down to microscale dimensions. Confocal and electron microscopy images of the final structure show a hierarchical layered cellular configuration composed of heterogeneous biomimetic materials. For a model system, a biomimetic arterial structure is formed using three types of vascular cells to mimic the 3-tunic structure found in vivo. This approach provides solutions to fabricate hierarchical "neotissues" with controlled microarchitectures and 3-D configurations of multiple cell types.

Biomimetic Materials↗
PubMed2007

Customized PEG-derived copolymers for tissue-engineering applications.

PEG-containing copolymers play a prominent role as biomaterials for different applications ranging from drug delivery to tissue engineering. These custom-designed materials offer enormous possibilities to change the overall characteristics of biomaterials by improving their biocompatibility and solubility, as well as their ability to crystallize in polymer blends and to resist protein adsorption. This article demonstrates various principles of PEG-based material design that are applied to fine tune the properties of biomaterials for different tissue engineering applications. More specifically, strategies are described to develop PEG copolymers with various block compositions and specific bulk properties, including low melting points and improved surface hydrophilicity. Highly hydrated polymer gel networks for promoting cellular growth or suppressing protein adsorption and cell adhesion are introduced. By incorporating selectively cleavable cross-links, these hydrophilic polymers can also serve as smart hydrogel scaffolds, mimicking the natural extracellular matrix for cell cultivation and tissue growth. Ultimately, these developments lead to the creation of biomimetic materials to immobilize bioactive compounds, allowing precise control of cellular adhesion and tissue growth. [image: see text]

Biocompatible Materials↗
PubMed2001

Dendritic Encapsulation of Function: Applying Nature's Site Isolation Principle from Biomimetics to Materials Science.

The convergence of our understanding of structure-property relationships for selected biological macromolecules and our increased ability to prepare large synthetic macromolecules with a structural precision that approaches that of proteins have spawned a new area of research where chemistry and materials science join with biology. While evolution has enabled nature to perfect processes involving energy transfer or catalysis by incorporating functions such as self-replication and repair, synthetic macromolecules still depend on our synthetic skills and abilities to mesh structure and function in our designs. Clearly, we can take advantage of our understanding of natural systems to mimic the structural features that lead to optimized function. For example, numerous biological systems make use of the concept of site isolation whereby an active center or catalytic site is encapsulated, frequently within a protein, to afford properties that would not be encountered in the bulk state. The ability of the dendritic shell to encapsulate functional core moieties and to create specific site-isolated nanoenvironments, and thereby affect molecular properties, has been explored. By utilizing the distinct properties of the dendrimer architecture active sites that have either photophysical, photochemical, electrochemical, or catalytic functions have been placed at the core. Applying the general concept of site isolation to problems in materials research is likely to prove extremely fruitful in the long term, with short-term applications in areas such as the construction of improved optoelectronic devices. This review focuses on the evolution of a natural design principle that contributes to bridging the gap between biology and materials science. The recent progress in the synthesis of dendrimer-encapsulated molecules and their study by a variety of techniques is discussed. These investigations have implications that range from the preliminary design of artificial enzymes, catalysts, or light-harvesting systems to the construction of insulated molecular wires, light-emitting diodes, and fiber optics.

Journal Article↗