PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “ETHYLENE OXIDE”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

Determination of ethylene oxide, ethylene chlorohydrin, and ethylene glycol in aqueous solutions and ethylene oxide residues in associated plastics.

A gas chromatographic (GC) method was developed for the determination of ethylene oxide and its two reaction products, ethylene chlorohydrin and ethylene glycol, in aqueous ophthalmic solutions. Propylene oxide was used as an internal standard. All three components were determined in one isothermal chromatographic analysis in less than 15 min. An extraction method for the determination of ethylene oxide residues in plastic components was also developed, and certain plastics with different ethylene oxide retention characteristics were identified.

Chlorohydrins↗

Disposition kinetics of ethylene oxide, ethylene glycol, and 2-chlorethanol in the dog.

The disposition kinetics of ethylene oxide, ethylene glycol, and 2-chloroethanol were studied following their intravenous administration to beagle dogs. Plasma concentration of ethylene oxide was found to decline exponentially with a mean rate constant of 0.024 +/- 0.008 min-1 (mean +/- SD) and total body clearance of 20.0 +/- 5.2 ml/kg X min. Ethylene oxide was found to be metabolized mainly to ethylene glycol, which had a mean plasma half-life of 221.0 +/- 77.7 min and a total body clearance of 2.13 +/- 0.58 ml/kg X min. Between 7 and 24% of intravenously administered ethylene oxide was eliminated in the urine as ethylene glycol within 24 h. The elimination half-life and clearance values for 2-chlorethanol were 40.8 +/- 5.7 min and 10.3 +/- 1.7 ml/kg X min, respectively. The pharmacokinetic data gathered in the present investigation suggest that ethylene glycol rather than 2-chloroethanol is the major metabolite of ethylene oxide in the dog.

Animals↗

Rapid gas chromatographic determination of ethylene oxide, ethylene chlorohydrin, and ethylene glycol residues in rubber catheters.

Isothermal gas chromatography with flame ionization detection was used to determine residual ethylene oxide (EtO), ethylene chlorohydrin, and ethylene glycol in soft rubber catheters that had been sterilized with EtO. Catheter samples were extracted by shaking with carbon disulfide, and the extract was analyzed on a 3% Carbowax 20M on 80-100 mesh Chromosorb 101 column, using nitrogen as the carrier gas. Ten replicate injections of a mixed standards solution gave coefficients of variation of 1.91, 1.23, and 4.74% for EtO, ethylene chlorohydrin, and ethylene glycol, respectively. A linear response was obtained with concentrations ranging from 1.0 to 7.9 micrograms EtO, 14.0 to 88.0 micrograms ethylene chlorohydrin, and 31.0 to 98.5 micrograms ethylene glycol. The proposed method detected as little as 0.5, 5.0, and 16.5 ng EtO, ethylene chlorohydrin, and ethylene glycol, respectively.

Catheterization↗

Determination of ethylene oxide, ethylene chlorohydrin, and ethylene glycol residues in ophthalmic solutions at proposed concentration limits.

A GLC method was developed for the determination of ethylene oxide and its two reaction products, ethylene chlorohydrin and ethylene glycol, in ophthalmic solutions at the levels recently proposed by the Food and Drug Administration. The method requires no extractions, sample preparations, or elaborate trapping and concentrating techniques. All three components can be chromatographed on the same spiral glass column packed with a porous polymer absorbent.

Chlorohydrins↗

Effect of Polyoxybutylene Chain Length on the Surface Activity of Butylene Oxide-Ethylene Oxide Block Copolymers.

Block copolymer surfactants (RBE) obtained by the addition of ethylene oxide to n-butyl, n-hexyl, n-octyl, and n-decyl ethers of mono- to tetrabutylene glycol are described. The surface activity of these nonionic surfactants has been determined, i.e., critical micelle concentration (CMC), surface excess concentration, Gamma, surface area demand per molecule, A, surface tension at CMC, gammaCMC, and DeltaG degreesads. A linear decrease of log CMC vs number of oxybutylene units in a copolymer molecule is observed. The change in the work of cohesion per oxybutylene group when passing from a molecular into a micellar state, calculated from the Shinoda equation, is 0.99-0.92 kT for the studied compounds. The equivalent of CH2 in the aliphatic alcohol group is 1.06-1.15 oxybutylene units. Surface properties of these surfactants, i.e., cloud point, wetting ability, contact angle, and foam height, have also been determined. Copyright 1998 Academic Press.

Journal Article↗

Effect of polyoxypropylene chain length on the critical micelle concentration of propylene oxide-ethylene oxide block copolymers.

In this work, the surface activity of block copolymer nonionic surfactants (RPE) has been determined, i.e., critical micelle concentration (CMC), surface excess concentration (gamma), surface area demand per molecule (A), surface tension at CMC (gamma(CMC)). A linear decrease of ln[CMC] vs number of oxypropylene units in copolymer molecule was observed. The change in the work of cohesion per oxypropylene group when passing from molecular into micellar state, calculated from the Shinoda equation, was 0.43 kT for the studied compounds.

Colloids↗

Size control of styrene oxide-ethylene oxide diblock copolymer aggregates with classical surfactants: DLS, TEM, and ITC study.

The interactions between the diblock copolymer S(15)E(63) and the surfactants sodium dodecyl sulfate (SDS), sodium decyl sulfate (SDeS), and sodium octyl sulfate (SOS) have been investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM), and isothermal titration calorimetry (ITC). The surfactants with the same headgroup differentiate in their chain length. At 20 degrees C, the block copolymer is associated into micelles with a hydrodynamic radius of 11.6 nm, which is composed of a hydrophobic styrene oxide (S) core and a water-swollen oxypolyethylene (PEO or E) corona. The different copolymer/surfactant systems have been studied at a constant copolymer concentration of 2.5 g dm(-3) and in a vast range of surfactant concentrations, from 7.5 x 10(-6) up to 0.75 M. When SDS and SDeS are added to the block copolymer solution, different regions are observed in the DLS data: at low surfactant concentrations (c < 1.0 x 10(-4) M), single surfactant molecules associate with the copolymer micelle, probably the former being solubilized in the micelle core, leading to a certain disruption of the mixed micelle due to repulsive electrostatic interactions between surfactant headgroups followed by a stabilization of the mixed micelle. At higher concentrations (1.0 x 10(-4) < c < 0.1 M), two types of copolymer-surfactant complexes coexist: one large copolymer-rich/surfactant complex and one small complex consisting of one or a few copolymer chains and rich in surfactants. At higher SDS and SDeS concentrations, complete disintegration of mixed micelles takes place. In contrast, SOS-S(15)E(63) interactions are less important up to surfactant concentrations of 0.05 M due to its higher hydrophilicity, reducing the hydrophobic interactions between surfactant alkyl chains and copolymer micelles. At concentration larger than the critical aggregation concentration (cac) of the system, 0.05 M, disruption of copolymer micelles occurs. These regions have been confirmed by transmission electron microscopy. On the other hand, the titration calorimetric data for SDS and SDeS present an endothermic increase indicating the formation of mixed copolymer-rich-surfactant micelles. From that point, important differences in the ITC plot for both surfactants are present. However, the ITC curve obtained after titration of a SOS solution in the copolymer solution is quite similar to that of its titration in water.

Calorimetry↗

Biodegradable polymeric nanospheres formed by temperature-induced phase transition in a mixture of poly(lactide-co-glycolide) and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer.

The mixture of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer(F-127) and PLGA (poly(lactide-co-gycolide)) forms a liquid state above their phase transition temperatures, and the phase-separated state is induced by decreasing the temperature below the phase transition temperature. On the basis of the temperature-induced phase transition behavior in the mixture of F-127 and PLGA, a novel method for the preparation of drug-loaded PLGA nanospheres was designed and characterized by measuring the loading amount, the encapsulation efficiency, and the drug release pattern. Paclitaxel, used as a potent anticancer drug, was selected as a model drug.

Antineoplastic Agents↗

Hydrophilized poly(lactide-co-glycolide) nanospheres with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer.

A novel method for preparing the PLGA nanospheres with hydrophilic surface has been designed and characterized. Because of good solubility of tetraglycol in water, PLGA (poly(lactide-co-glycolide)) nanospheres were formed by spraying the PLGA/tetraglycol solution into water. The size of PLGA nanospheres was manipulated by changing the concentration of PLGA/tetraglycol solution. Based on the hydrophobic interaction between PLGA and poly(propylene oxide) domain of F-127 (one of Pluronics, poly(ethylene oxide)-poly(propylene oxide)poly(ethylene oxide) triblock copolymer, F-127-coated PLGA nanospheres was prepared to enhance the stability of PLGA nanospheres in the aqueous media. For the application as a drug delivery vehicle, it was characterized by measuring the loading amount, the encapsulation efficiency and the release pattern of drug. Paclitaxel used as a potent anti-cancer drug was selected as a model drug.

Antineoplastic Agents↗

Association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers with cationic surfactants in aqueous solution.

The association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers in aqueous solution with hexadecyltrimethylammonium bromide (HTAB), tetradecyltrimethylammonium bromide (TTAB), and dimethylene bis(decyldimethylammonium bromide) (10-2-10), was studied by fluorescence, viscosity, and Krafft temperature measurements. It has been observed that (EO)18(PO)31(EO)18 interacts more strongly than (EO)2(PO)15.5(EO)2 and (EO)2.5(PO)31(EO)2.5 with HTAB/TTAB due to synergistic interactions. A stronger capability of (EO)18(PO)31(EO)18 to interact with cationic surfactants arises from the greater number of electronegative EO units (total 36 EO units) than of (EO)2(PO)15.5(EO)2 (total 4 EO units) and (EO)2.5(PO)31(EO)2.5 (total 5 EO units). The antagonistic mixing behavior of present triblock polymers has been observed with 10-2-10. A difference in the mixing behavior of the latter from that of HTAB/TTAB has been attributed to its dimeric nature, which may create steric hindrances with triblock polymer components at the head group region in the mixed state.

Journal Article↗

Effects of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers on structure and stability of liposomal dioleoylphosphatidylethanolamine.

The effects caused by poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO; Pluronic) copolymers on the structure and stability of dioleoylphosphatidylethanolamine (DOPE) liposomes were studied by means of turbidity, leakage, and cryo-transmission electron microscopy investigations. The results show that by inclusion of Pluronics in the DOPE dispersion it is possible to stabilize the lamellar Lalpha phase and to produce liposomes that are stable and nonleaky at low pH (pH 5). The stabilizing capacity was observed to depend critically on the molecular composition of the Pluronics. Block copolymers with comparably long PPO and PEO segment lengths, such as F127 and F108, most effectively protected DOPE liposomes prepared at high pH from aggregation and subsequent structural rearrangements induced by acidification. A sufficiently long PPO block was found to be the most decisive parameter in order to obtain adequate coverage of the liposome surface at low Pluronic concentrations. Upon increasing the copolymer concentration, however, Pluronics with comparably short PPO and PEO segment lengths, such as F87 and P85, could also be used to stabilize the DOPE liposomes. Essentially the same trends were observed when the Pluronics were added to preformed DOPE liposomes instead of being included in the preparation mixture. In this case the least effective copolymers failed, however, to completely prevent the DOPE liposomes from releasing encapsulated hydrophilic markers.

Cryoelectron Microscopy↗

Effects of inorganic salts on solubilization of estriol in an aqueous solution of poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymer.

The effects of inorganic salts on the solubilization of estriol was studied in an aqueous solution of a poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymer (Pluronic L-64). The solubility of estriol increased with increasing Pluronic L-64 and salt concentrations. Furthermore, two clear transition points corresponding to the polymolecular micelle formation and a pronounced change in micellar structure of Pluronic L-64 were found on the solubility curves. The effectiveness of inorganic salts for increasing solubility of estriol followed approximately the lyotropic or Hofmeister series, except Li+.

Drug Compounding↗

Heat capacity of transfer of (Ethylene oxide)13-(propylene oxide)30-(ethylene oxide)13 from water to the aqueous anionic surfactant solutions at 298 K. A quantitative treatment.

Heat capacities of transfer (DeltaCpt) of unimeric (ethylene oxide)13-(propylene oxide)30-(ethylene oxide)13 from water to the aqueous surfactant solutions as functions of the surfactant concentrations (mS) were determined at 298 K. The surfactants investigated are sodium hexanoate, sodium heptanoate, sodium octanoate, sodium undecanoate, and sodium dodecanoate. For short alkyl chain surfactants, the profiles of the DeltaCpt versus mS curves show maxima and minima; for long alkyl chain surfactants, the maximum becomes sharper and moved to lower mS values whereas the minimum tends to disappear. These experimental trends are different from those of the enthalpy in agreement with the fact that heat capacity, being the derivative of enthalpy with respect to temperature, reflects additional terms generated by temperature change on the equilibria in solution. On the basis of a thermodynamic model recently proposed by us for properties first derivatives of Gibbs free energy, a quantitative treatment of the experimental data was done. Such an approach assumes that even in the dilute surfactant region monomers of surfactant associate with unimeric copolymer generating surfactant-copolymer aggregation complexes and, whenever the surfactant achieves the conditions for the micellization, the formation of copolymer-micelle mixed aggregates takes place. The equation derived for the heat capacity of transfer is more complex than that for the enthalpy because it contains five additional terms due to the shift of the equilibria induced by the temperature change. It turned out that these contributions, evaluated by using the equilibrium constants and the associated enthalpies, cannot be neglected for a quantitative treatment of the experimental data. The minimizing procedure provided the heat capacity changes for the formation of the surfactant-copolymer aggregation complexes and the copolymer-micelle mixed aggregates.

Journal Article↗

Room temperature phosphorescence of 6-bromo-2-naphthol in micelles of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers and in their mixed aggregates with sodium dodecyl sulfate.

Room temperature phosphorescence (RTP) of 6-bromo-2-naphthol has been investigated in aqueous micellar solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers as well as in their mixed aggregates with sodium dodecyl sulfate. RTP of the phosphorophor was enhanced to some extent in the micelles of the block copolymers. However, marked enhancement of RTP was observed in the mixed aggregates. The enhancement of RTP is attributed to effective incorporation of the phosphorophor into the micelles and the aggregates, resulting in suppression of nonradiative deactivation of the phosphorescent state.

Micelles↗