SEARCH · PubMed Health

Results for “Extracellular polymeric substances (EPS)”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

PubMed2003

Anions effects on biosorption of Mn(II) by extracellular polymeric substance (EPS) from Rhizobium etli.

Microbial extracellular polymeric substances (EPS) are potential biosorbents for metal remediation and recovery. The Langmuir and Freundlich kinetics of Mn(II) binding by the EPS from a novel Mn(II) oxidising strain of Rhizobium etli were determined. Maximum manganese specific adsorptions (q(max)) decreased in the sequence: sulphate (62 mg Mn per g EPS) > nitrate (53 mg g(-1)) > chloride (21 mg g(-1)). Consideration of the anion during kinetic studies is usually neglected but is important in providing more practical and comparable data between different biosorbent systems.

Adsorption↗

PubMed2002

Extraction of extracellular polymeric substances (EPS) of sludges.

The efficacies of extracting extracellular polymeric substances (EPS) from aerobic, acidogenic and methanogenic sludges using EDTA, cation exchange resin and formaldehyde under various conditions were compared. Results show that formaldehye plus NaOH was most effective in extracting EPS for all sludges; only 1.1-1.2% of DNA in the sludge samples were detected, suggesting the EPS extracted were not contaminated by intracellular substances. For each gram of volatile solids, formaldehyde-NaOH extracted 165, 179 and 102 mg of EPS from aerobic, acidogenic and methanogenic sludges, respectively. All EPS were mainly composed of carbohydrate, protein and humic substance, plus small quantities of uronic acid and DNA. Carbohydrate was predominant in the acidogenic sludge (62% in the EPS extracted by formaldehyde-NaOH), whereas protein was predominant in the methanogenic sludge (41%). Humic substance, which has often been overlooked, accounted for 30.6, 8.4 and 22.8% of the extracted EPS from aerobic, acidogenic and methanogenic sludges, respectively. However, judging from EPS quantities estimated from confocal laser scanning microscopic observations, formaldehyde-NaOH extracted only a limited portion of EPS. Optimization of extraction procedures and/or development of a more effective extraction method are warranted.

Biopolymers↗

PubMed2006

Soluble microbial products (SMP) and soluble extracellular polymeric substances (EPS) from wastewater sludge.

Laspidou and Rittmann (Water Research 36:2711-2720, 2002) proposed that the soluble extracellular polymeric substances (EPS) are identical to soluble microbial products (SMP) in sludge liquor. In this paper, we compared the physicochemical characteristics of the SMP and soluble EPS from original and aerobically or anaerobically digested wastewater sludge. The surface charges, particle sizes, residual turbidities of polyaluminum chloride (PACl) coagulated supernatant, and chemical compositions of the SMP and soluble EPS containing suspensions were used as comparison index. Experimental results revealed that the particles in SMP and soluble EPS fractions extracted from original wastewater sludge, before and after digestion, were not identical in all physicochemical characteristics herein measured. The current test cannot support the proposal by Laspidou and Rittmann (Water Research 36:2711-2720, 2002) that SMP is identical to the soluble EPS from a wastewater sludge.

Aerobiosis↗

PubMed2006

Lead and cadmium biosorption by extracellular polymeric substances (EPS) extracted from activated sludges: pH-sorption edge tests and mathematical equilibrium modelling.

The sorption of Cd and Pb by extracellular polymeric substances (EPS) extracted from activated sludges originated from wastewater treatment plants (WWTPs) or Lab-scale bioreactors was investigated as a function of pH. The study was carried out using a polarographic method in the SMDE (stripping mercury dropping electrode) mode which is suited to determine labile metals in solution containing soluble ligands such as EPS. The results obtained provide evidence of the presence of a pH-sorption/desorption edge for Cd and Pb by EPS. The use of Kurbatov's model gives information on the mechanisms involved through the determination of "relative complexation constants" (operationally defined) and the number of protons exchanged. The use of this model demonstrates that proton exchange with metals is not the only mechanism involved in metal biosorption by EPS. Other mechanisms such as cation exchange with Ca or Mg, global electric field surrounding the ligand or micro-precipitation of metals could be involved in metal sorption by EPS. The position of the pH-sorption edge curves and the "relative complexation constants" show that Pb displays a greater affinity for EPS than Cd. The studied EPS have large differences regarding binding strength of Cd and Pb. These differences are not correlated with the organic parameters measured to characterize the EPS, however the mineral fraction of the EPS could be involved to a large extent in the sorption of metal.

Cadmium↗

PubMed2006

Stability of sludge flocs under shear conditions: roles of extracellular polymeric substances (EPS).

The roles of extracellular polymer substances (EPS) in the shear stability of aerobic and anaerobic flocs were investigated. Both pH and EDTA concentration had a significant effect on the floc stability. The sludge flocs became much weaker as the solution pH increase to above 10. Addition of 1 mM EDTA or more could cause considerable cell erosion and deflocculation of the anaerobic flocs, whereas more than 3 mM EDTA was needed to show its adverse effect on the stability of aerobic flocs. A fraction of the EPS, around 10 mg/g SS for the aerobic flocs and 15 mg/g SS for the anaerobic flocs, could be extracted by fluid shear when the dispersed mass concentration approached the equilibrium. This suggests that most of the dispersed particles were glued by a small amount of readily-extractable EPS fraction. In addition to the abundance of this EPS fraction, its proteins/carbohydrates ratio, about 0.22:1 for the aerobic flocs and 2.66:1 for the anaerobic flocs, also appeared to be an important factor governing the microbial floc stability. A lower content of the readily-extractable EPS fraction and a lower ratio of proteins/carbohydrates were responsible for the greater stability of microbial flocs. The total content of the EPS, however, did not show a direct correlation with the floc stability. A hypothesis about biological flocs with two distinct structural regions was proposed. The outer part contained dispersible cells loosely entangled by the readily-extractable EPS fraction. This part was layered and would become completely dispersed at an infinite shear intensity. On the other hand, the inner part contains biomass in a stable structure tightly glued by EPS, which could not be dispersed by shear except under unfavorable conditions.

Bacterial Adhesion↗

PubMed2004

Comparison of the complexation potential of extracellular polymeric substances (EPS), extracted from activated sludges and produced by pure bacteria strains, for cadmium, lead and nickel.

This paper provides information on the metal complexation potential of extracellular polymeric substances (EPS), extracted from activated sludges and from eight pure cultures of bacteria isolated from the same activated sludge. The EPS extracted from pure bacteria cultures are mainly composed of proteins and low quantities of polysaccharides and uronic acids in comparison with EPS extracted from activated sludges. The EPS studied present two apparent pK(a) and the IR spectra show the presence of the same functional groups on all the EPS studied. The ability of EPS to complex Cd, Pb and Ni, was studied at pH 7 with Chau and Ruzic's models using polarography titration. All of the EPS exhibited a greater ability to complex Pb than Ni, Cd showing the weakest affinity overall. The EPS extracted from the pure cultures of bacteria were less able to complex the metals than that extracted from activated sludges. Literature data, IR data and EPS phosphorous content, supported by the EPS pK(a), revealed that carboxylic and phosphoric groups may play a major role in binding to metals at pH 7. This study underlines the importance of metal exposure in order for bacteria to secrete or modify EPS. After exposure, the EPS then exhibit the greatest capacity to bind metal in order to protect bacteria from harmful effects of heavy metals.

Biopolymers↗

PubMed2006

Influence of loosely bound extracellular polymeric substances (EPS) on the flocculation, sedimentation and dewaterability of activated sludge.

Laboratory experiments on the activated sludge (AS) process were carried out to investigate the influence of microbial extracellular polymeric substances (EPS), including loosely bound EPS (LB-EPS) and tightly bound EPS (TB-EPS), on biomass flocculation, sludge settlement and dewaterability. The heat EPS extraction method was modified to include a mild step and a harsh step for extracting the LB-EPS and TB-EPS, respectively, from the sludge suspension. Six lab-scale AS reactors were used to grow AS with different carbon sources of glucose and sodium acetate, and different sludge retention times (SRTs) of 5, 10 and 20 days. The variation in the bioreactor condition produced sludge with different abundances of EPS and different flocculation and separation characteristics. The sludge that was fed on glucose had more EPS than the sludge that was fed on acetate. For any of the feeding substrates, the sludge had a nearly consistent TB-EPS value regardless of the SRT, and an LB-EPS content that decreased with the SRT. The acetate-fed sludge performed better than the glucose-fed sludge in terms of bioflocculation, sludge sedimentation and compression, and sludge dewaterability. The sludge flocculation and separation improved considerably as the SRT lengthened. The results demonstrate that the LB-EPS had a negative effect on bioflocculation and sludge-water separation. The parameters for the performance of sludge-water separation were much more closely correlated with the amount of LB-EPS than with the amount of TB-EPS. It is argued that although EPS is essential to sludge floc formation, excessive EPS in the form of LB-EPS could weaken cell attachment and the floc structure, resulting in poor bioflocculation, greater cell erosion and retarded sludge-water separation.

Bacteria↗

PubMed2003

Development of an indirect competitive enzyme-linked immunosorbent assay to detect extracellular polymeric substances (EPS) secreted by the marine stromatolite-forming cyanobacteria, Schizothrix sp.

An indirect competitive enzyme-linked immunosorbent assay was developed using polyclonal antibody to detect extracellular polymeric secretions (EPS) produced by the marine stromatolite-forming cyanobacteria, Schizothrix sp. The cross-reactivity of this assay with other EPSs and polymers were low (< 0.5%). This assay can detect Schizothrix sp. EPS as low as 0.5 ng/mL. Intra-assay and inter-assay comparisons showed that coefficient variations were low, ranging from 3.34 to 10.30% and from 6.30 to 12.8%, respectively, for standards between 2 and 1000 ng/mL. Also, the seawater matrix effect was negligible. Our results indicated that this assay is a useful tool for quantification of Schizothrix sp. EPS in a range of ng/mL.

Cross Reactions↗

PubMed2005

Bacterial extracellular polymeric substance (EPS): a carrier of heavy metals in the marine food-chain.

The ecological implications of metal binding properties of bacterial EPS and its possible role in the bioaccumulation of pollutants in the marine food-chain was investigated using a partially purified and chemically characterized microbial EPS isolated from a species of Marinobacter. Various factors influencing metal sorption by the EPS including the influence of initial metal concentrations, incubation time, pH and sodium chloride concentrations on binding of lead (Pb2+) and copper (Cu2+) were evaluated. The bacterial EPS selectively bound more amount of Cu2+ per mg of EPS than Pb2+. Both copper and lead were sorbed more at near neutral pH than acidic pH. The sorption of Cu2+ increased with increasing copper concentration. The estimated maximum binding ability (MBA) of the EPS was 182 nmol copper and 13 nmol lead mg(-1) EPS. However, the sorption of these metals decreased with the increase in sodium chloride concentration. Furthermore, up to 35% of 14C-labeled Marinobacter was ingested by a benthic polychaete Hediste diversicolor. On an average, 29% of the ingested EPS was absorbed into tissues and 49% of the EPS was respired. It was apparent that the animals used the EPS as a source of energy and nutrition. The labile nature of the bacterial EPS and its ability to bind heavy metals might route the bound metals through the marine food chain, thereby transferring and aiding bioaccumulation of metal pollutants in the higher trophic animals.

Adsorption↗

PubMed2002

Key parameters in sludge dewatering: testing for the shear sensitivity and EPS content.

The fraction of extractable extracellular polymeric substances (EPS) and the shear sensitivity (k(ss)) are key parameters with respect to sludge dewatering, affecting the dry matter content of dewatered sludge and the dewatering rate and conditioner demand, respectively. Methods are described for determination of the two key parameters by use of the same laboratory test reactor. The implications of such characterisation with respect to dewatering are discussed based on examples of application to sludge processing and novel process development for sludge minimisation.

Polymers↗

PubMed2006

Effect of extraction method on EPS from activated sludge: an HPSEC investigation.

The extracellular polymeric substances (EPS) contained in activated sludge flocs resulting from two-sewage treatment plants were extracted according to eight methods referred to in the bibliography. Extracted EPS were characterized by their extraction yield, carbon concentration, their biochemical composition, their HPSEC chromatograms and, where possible, molecular weight (MW) distributions. With HPSEC chromatograms, the use of the mobile phase containing methanol allowed a hydrophobic mechanism for EPS, extracted partly by chemical methods, to be identified. An MW distribution (from 0.1 to 600kDa) was established for EPS extracted by control and physical methods only, from calibration. Except for the resin and heating extraction methods, the EPS extracted from the two sludges displayed the same trend in their HPSEC fingerprints but not in their MW distribution. Results show that the extraction methods using chemical reagents strongly affected the HPSEC fingerprints of EPS, whereas, the physical methods influenced only MW distribution but not HPSEC fingerprints. The use of heat to extract EPS seems to induce hydrolysis of a part of EPS. The HPSEC fingerprint is a good indicator for the appreciation of the consequences of EPS extraction methods on the EPS extracted and the distribution of EPS with low MW in particular.

Chemical Fractionation↗

PubMed2026

Interface-dependent V. parahaemolyticus biofilm under varying temperatures, media, and oxygen conditions: implications for seafood safety.

Vibrio parahaemolyticus biofilms play a critical role in pathogen persistence in marine and seafood-processing environments, where oxygen availability, temperature, and surface interfaces vary widely. This study investigated biofilm development by three strains on partially submerged stainless-steel coupons under gas-liquid-wall (GLW) and fully submerged (SM) interfaces. Viable cell counts (log₁₀CFU/cm2) along with normalized protein concentration per viable cell (nProt) and normalized polysaccharide concentration per viable cell (nPol) were measured, under aerobic and anaerobic conditions across a temperature range of 15-30 °C, using tryptic soy broth with 3% NaCl (TSB) and seawater-based medium (SW). GLW biofilms consistently exhibited higher cell counts (6.4-7.3 log₁₀CFU/cm2) compared to SM biofilms (5.9-6.3 log₁₀CFU/cm2), suggesting that enhanced oxygen diffusion promotes bacterial proliferation. Conversely, SM biofilms exhibited significantly higher nProt and nPol levels (p < 0.001), indicating increased production of the extracellular polymeric substance (EPS) matrix under low-oxygen, high-nutrient conditions. Microscopy and three-dimensional surface plot analyses revealed relatively uniform biofilm layers at the GLW interface, whereas SM biofilms formed heterogeneous, tower-like structures. EPS production was further influenced by medium composition, oxygen, and temperature. SM biofilms grown in SW exhibited significantly higher nProt and nPol than those in TSB under aerobic conditions (p < 0.001), indicating enhanced matrix stabilization. Under anaerobic conditions at 15 °C, nProt and nPol were higher, whereas under aerobic conditions, peak nProt and nPol occurred at elevated temperatures. These findings highlight a trade-off between bacterial growth and matrix production and provide insight into biofilm adaptation and persistence in seafood-processing environments. These insights may help develop improved biofilm control and seafood safety management.

Biofilms↗

PubMed2005

Biofilm formation by algae as a mechanism for surviving on mine tailings.

Photosynthetic biofilms successfully colonize the sediments of a mine tailings reservoir (Guanajuato, Mexico) despite the high metal concentrations that are present. To elucidate the mechanisms of biofilm survival despite metal ores, experiments were performed to evaluate the response of seminatural biofilms to Cu, Zn, and a combination of both metals at concentrations observed in the field. The biofilms were composed mostly of the chlorophyte Chlorococcum sp. and the cyanobacterium Phormidium sp., and their response to the two added metals was described by measurements of extracellular polymeric substances (EPS) and in vivo fluorescence. The photosynthetic efficiency and the minimal chlorophyll fluorescence of dark-adapted cells were measured by multiwavelength pulse amplitude-modulated fluorometry. The photosynthetic efficiency of light-adapted cells (phi(PSII)) also was measured. Metal exposure increased the EPS production of biofilms, as visualized with confocal laser-scanning microscopy. Extracellular polymeric substances enhanced the extracellular metal accumulation from the first day of metal exposure. Metals provoked changes in the relative abundance of the dominant taxa because of a species-specific response to the metals when added individually. Metals affected the phi(PSII) less than the total biomass, suggesting ongoing activity of the surviving biofilms. Survival of individual biofilm photosynthetic cells was found to resume from the embedding in the mucilaginous structure, which immobilizes the metals extracellularly. The survival of biofilms under mixed-metal exposure has practical applications in the remediation of mine tailings.

Biodegradation, Environmental↗

PubMed2004

Adhesion of bacterial exopolymers to alpha-FeOOH: inner-sphere complexation of phosphodiester groups.

Extracellular polymeric substances (EPS) constitute a heterogeneous mixture of polyelectrolytes that mediate biomineralization and bacterial adhesion and stabilize biofilm matrixes in natural and artificial environments. Although nucleic acids are exuded extracellularly and are purported to be required for biofilm formation, direct evidence of the active mechanism is lacking. EPS were extracted from both Bacillus subtilis (a gram-positive bacterium) and Pseudomonas aeruginosa (a gram-negative bacterium) and their interaction with the goethite (alpha-FeOOH) surface was studied using attenuated total internal reflection infrared spectroscopy. Correspondence between spectral data and quantum chemical calculations demonstrate that phosphodiester groups of nucleic acids mediate the binding of EPS to mineral surfaces. Our data indicate that these groups emerge from the EPS mixture to form monodentate complexes with Fe centers on the goethite (alpha-FeOOH) surface, providing an energetically stable bond for further EPS or cell adhesion.

Adsorption↗

PubMed2001

Effect of EPS on biofilm structure and function as revealed by an individual-based model of biofilm growth.

We have simulated a nitrifying biofilm with one ammonia and one nitrite oxidising species in order to elucidate the effect of various extracellular polymeric substance (EPS) production scenarios on biofilm structure and function. The individual-based model (IbM) BacSim simulates diffusion of all substrates on a two-dimensional lattice. Each bacterium is individually simulated as a sphere of given size in a continuous, three-dimensional space. EPS production kinetics was described by a growth rate dependent and an independent term (Leudeking-Piret equation). The structure of the biofilm was dramatically influenced by EPS production or capsule formation. EPS production decreased growth of producers and stimulated growth of non-producers because of the energy cost involved. For the same reason, EPS accumulation can fall as its rate of production increases. The patchiness and roughness of the biofilm decreased and the porosity increased due to EPS production. EPS density was maximal in the middle of the vertical profile. Introduction of binding forces between like cells increased clustering.

Ammonia↗

PubMed2004

Coprecipitation of Th(4+) and the purified extracellular polysaccharide produced by bacterium Bradyrhizobium (Chamaecytisus) BGA-1.

The soil bacterium Bradyrhizobium (Chamaecytisus) strain BGA-1 produces an extracellular polymeric substance (EPS) that, in the presence of Fe(3+), Al(3+) or Th(4+) solutions, forms a gel-like precipitate composed of polysaccharide, protein, lipopolysaccharide and the metal. Precipitation of the main component of the EPS, the extracellular polysaccharide, and thorium was studied. The precipitate was stable, but redissolved at pH values below 3.0 or in the presence of 10 mM EDTA. In the precipitate, the ratio thorium/basic repeating unit of the polysaccharide ranged from 0.4 to 0.8 mol/mol. Soluble polysaccharide-thorium complexes were not found, and larger polysaccharide molecules were precipitated in preference to smaller ones. Kinetic studies showed a non-linear dependence of the precipitate on the concentrations of both thorium and polysaccharide. The behaviors of the purified polysaccharide and of whole EPS with the thorium-containing precipitate were compared. The results suggested that EPS components other than polysaccharide are able to modify the precipitating ability of the polysaccharide. Thus, whole EPS is a better substrate than the purified polysaccharide for the removal of thorium from its solutions.

Biodegradation, Environmental↗

PubMed2005

Extracellular DNA in single- and multiple-species unsaturated biofilms.

The extracellular polymeric substances (EPS) of bacterial biofilms form a hydrated barrier between cells and their external environment. Better characterization of EPS could be useful in understanding biofilm physiology. The EPS are chemically complex, changing with both bacterial strain and culture conditions. Previously, we reported that Pseudomonas aeruginosa unsaturated biofilm EPS contains large amounts of extracellular DNA (eDNA) (R. E. Steinberger, A. R. Allen, H. G. Hansma, and P. A. Holden, Microb. Ecol. 43:416-423, 2002). Here, we investigated the compositional similarity of eDNA to cellular DNA, the relative quantity of eDNA, and the terminal restriction fragment length polymorphism (TRFLP) community profile of eDNA in multiple-species biofilms. By randomly amplified polymorphic DNA analysis, cellular DNA and eDNA appear identical for P. aeruginosa biofilms. Significantly more eDNA was produced in P. aeruginosa and Pseudomonas putida biofilms than in Rhodococcus erythropolis or Variovorax paradoxus biofilms. While the amount of eDNA in dual-species biofilms was of the same order of magnitude as that of of single-species biofilms, the amounts were not predictable from single-strain measurements. By the Shannon diversity index and principle components analysis of TRFLP profiles generated from 16S rRNA genes, eDNA of four-species biofilms differed significantly from either cellular or total DNA of the same biofilm. However, total DNA- and cellular DNA-based TRFLP analyses of this biofilm community yielded identical results. We conclude that extracellular DNA production in unsaturated biofilms is species dependent and that the phylogenetic information contained in this DNA pool is quantifiable and distinct from either total or cellular DNA.

Bacteria↗

PubMed2006

Alkaline and acid hydrolytic processes in aerobic and anaerobic sludges: effect on total EPS and fractions.

Sludge samples from an upflow anaerobic sludge blanket (UASB) reactor and four submerged aerated biofilters (BFs) of a wastewater treatment plant (1,000 inhab.) were processed at bench scale by alkaline and acid hydrolysis with the objective to evaluate the organic matter solubilization, volatile solids (VS) destruction and the effect of hydrolytic processes on the extracellular polymeric substances (EPS) fraction of the sludge samples. The results showed that alkaline hydrolysis of sludge samples treatment with 1.0% total solids (TS) using NaOH 20 meq L(-1) was more efficient on organic matter solubilization and VS destruction than acid hydrolysis. The EPS sludge content was also affected by the alkaline treatment of anaerobic sludge samples. The EPS concentrations (mg EPS/gVSS) on the anaerobic sludge after the alkaline treatment were significantly lowered according to sample height in the UASB reactor. Data indicated that the EPS sludge fraction is the main component affected by the alkaline hydrolytic process of anaerobic sludge samples.

Acids↗