PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “LUMINESCENCE”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
PubMed1980

A study of dark luminescence in Chlorella. Background luminescence, 3-(3,4-dichlorophenyl)-1,1-dimethylurea-triggered luminescence and hydrogen peroxide chemiluminescence.

Dark luminescence, defined as the ability of completely relaxed (dark-adapted) photosynthetic systems to emit light, has been studied in Chlorella. Three main effects have been demonstrated. 3-(-3,4-Dichlorophenyl)-1,1-dimethylurea elicits a weak emission LD of very long lifetime (several minutes); it is believed to result from a negative shift of redox potential of the secondary System II electron acceptor B producing in some centers a state Q- (reduced primary acceptor), as postulated by Velthuys and Amesz ((1974 Biochim. Biophys. Acta 333, 85--94), which can recombine with an oxidizing equivalent in a state S2 present in very small amount. As in photoinduced luminescence, this recombination excites chlorophyll which then emits light. A much stronger emission LH is observed after injection of H2O2. Both signals are modified or suppressed by treatments specific of the oxygen emission system, such as: thermal denaturation at 50 degrees C, NH2OH, etc. In addition, a weak, permanent background luminescence L0 has been observed; like LD and and LH, it is a System II property and requires the integrity of the oxygen-evolving system. It is believed to reflect a very slow back flow of electrons from an endogeneous reductant pool to oxygen through part of the photosynthetic chain. Using flash preillumination, it is demonstrated that H2O2 is able to oxidize S0 into S2, the latter giving rise to LH; H2O2 does not act on S1 (or much less). The reactive site of H2O2 seems to be the same as the binding site of NH2OH. Evidence is given that the strong LH signal in particular reveals a stable, low pH of the intrathylakoid phase in Chlorella.

Chlorella↗
PubMed1978

Induction patterns of delayed luminescence fromisolated chloroplasts. I. Response of delayed luminescence to changes in the prompt fluorescence yield.

1. Using a phosphoroscope, delayed luminescence and prompt chlorophyll fluorescence from isolated chloroplasts have been compared during the induction period. 2. Two distinct decay components of delayed luminescence were measured a "fast" component (from approximately 1 ms to approximately 6 ms) and a "slow" component (at approximately 6 ms). 3. The fast luminescence component often did not correlate with the fluorescence changes while the slow component significantly changed its intensity during the induction period in a manner which could usually be linearly correlated with variable portion of the fluorescence yield change. 4. This correlation was evident after preillumination with far-red light or after allowing a considerable time for dark relaxation. 5. The close relationship between the slow luminescence component and variable fluorescence yield was observed with a large range of light intensities and also in the presence of 3-(3,4-dichlorophenyl)-1,1-dimethylurea which considerably changes the fluorescence induction kinetics. 6. Valinomycin and other antibiotics reduced the amplitude of the 6 ms (slow) luminescence without affecting its relation with the fluorescence induction suggesting possibly that a constant electrical gradient exist in the dark or formed very rapidly in the light, which effects the emission intensity. 7. Changes in salt levels of suspending media equally affected the amplitude of both delayed luminescence and variable fluorescence under conditions when the reduction of Q is maximal and constant. 8. The results are discussed in terms of several models. It is concluded that the model of independent Photosystem II units together with photosynthetic back reaction concept is incompatible with the data. Other alternative models (the "lake" model and photosynthetic back reaction; recombination of charges in the antenna chlorophyll; the "w" hypothesis) were in closer agreement with the results.

Chloroplasts↗
PubMedDate not supplied

[Continuous cultivation of Photobacterium phosphoreum luminescent bacteria with control of the luminescence].

The paper describes a procedure for continuous cultivation of luminescent bacteria Photobacterium phosphoreum according to which the nutrient flow is controlled with respect to the luminescence intensity. The biomass yield of this cultivation procedure at the given luminescence intensity 6.1 X 10(12) quantum X ml-1 s-1 is over three times higher than that obtained in periodic cultivation, with the specific cell luminescence being identical in both cases. The cultivation process is unstable at the luminescence intensity 4.1 X 10(12) quantum X ml-1 s-1 and the glycerol content in the nutrient medium over 6 g/l. Practical applications of the above procedure for the cultivation of luminescent bacteria are discussed.

Bacteriological Techniques↗
PubMed2000

Bacterial luminescence: luminescence mechanism with cyclic peroxide participation and dependence on reactive oxygen species (a hypothesis).

Chemically initiated exchange (CIEE) luminescence reactions were reviewed and a new mechanism of luminescence with peracid as an intermediate is proposed; bacterial luminescence is generally considered to be a case of dioxetane luminescence, or, to be more precise, CIEE-luminescence which includes the generation of a cyclic peroxide. In the hypothesis the monooxygenase reaction (aldehyde -->fatty acid) should not be coupled with emitter generation as is usually believed, but only with the generation of peracid. As to the generation of the emitter, excited flavin, it is likely to occur later, during the interaction of flavin with cyclic peroxide. Its consequence is the breaking of two chemical bonds (O-O and C-C) in the cyclic peroxide and simultaneous generation of 4alpha-hydroxyflavin in exited state. In general, the generation of light includes three stages: 1) the monooxygenase reaction and the concurrent production of peracid; 2) the conversion of peracid to cyclic peroxide; and 3) the interaction of cyclic peroxide with flavin (through the CIEE mechanism).

Luminescent Measurements↗
PubMed2006

Luminescence and reversible luminescence thermochromism of bulk and microcrystals of dibenzoylmethanatoboron difluoride.

Essential differences in the luminescence properties of dibenzoylmethanatoboron difluoride (1) bulk and microcrystals were detected. Analysis of the spectral data showed that in every case the fluorescence spectrum of 1 consisted of three components: monomer fluorescence, excimer fluorescence, and fluorescence related with interdimer interaction. Evolution of luminescence spectra observed with decrease of the crystal size are bound with decrease of monomer fluorescence intensity and considerable growth of intensity of fluorescence related to interdimer interaction. The presence of reversible luminescence thermochromism was discovered for 1: lowering the temperature from 300 to 77 K resulted in essential hypsochromic shift of the luminescence band maximum ( approximately 60 nm) connected with considerable decrease of the distances between the planes of the neighboring molecules ( approximately 0.1 Angstrom) that lead to the weakening of interdimer interaction and intensification of monomer luminescence.

Journal Article↗
PubMed1997

Thiol-reactive, luminescent Europium chelates: luminescence probes for resonance energy transfer distance measurements in biomolecules.

Lanthanide chelates have recently been shown to be extremely promising luminescence probes for distance measurements in biomolecules using luminescence resonance energy transfer measurements [P. R. Selvin, T. M. Rana, and J. E. Hearst (1994) J. Am. Chem. Soc. 116, 6029-6030; P. R. Selvin, and J. E. Hearst (1994) Proc. Natl. Acad. Sci. USA 91, 10024-10028]. In this work we describe simple procedures for preparing highly fluorescent thiol-reactive europium chelates. These new compounds contain a uv-absorbing coumarin group which sensitizes europium emission, diethylenetriaminepentaacetic acid or triethylenetetraaminehexaacetic acid groups which provide europium chelating function, and a pyridyl disulfide group which allows specific modification of thiol groups. These reagents can be used to label proteins at Cys residues or synthetic oligonucleotides which contain thiol groups. Modification can be reversed easily by treatment with a reducing agent (dithiothreitol). Luminescence energy transfer between these new chelates and CY5 fluorochrome attached to the opposite ends of 15-bp double-stranded DNA was measured to test their usefulness for distance measurements in macromolecules. The distance measured between the chelate (donor) and CY5 (acceptor) was in the range expected for the length of 15-bp DNA. The stability of europium chelates and their conjugates with a protein, the precision of distance measurements using these chelates, possible errors due to intramolecular energy transfer, and the modulation of the R0 value with deuterium oxide were tested. The results obtained fully confirmed the great potential of these new probes for sensitive, simple, and precise distance measurements in biomolecules using luminescence resonance energy transfer.

Base Sequence↗
PubMed2003

Luminescent lanthanide complexes with stereocontrolled tris(2-pyridylmethyl)amine ligands: chirality effects on lanthanide complexation and luminescence properties.

A series of tris(2-pyridylmethyl)amines including one and two asymmetric centers were synthesized in a stereo-controlled fashion as potential ligands of lanthanide cations. The reaction of chiral pyridylethyl methanesulfonates and bis(pyridylmethyl)amines occurred via an S(N)2 mechanism with complete inversion of asymmetric centers and gave the stereocontrolled tris(2-pyridylmethyl)amines, the stereochemical purity of which was ascertained by GPC, NMR, X-ray, and polarimetry experiments. They formed stable Tb(3+) and Eu(3+) complexes having 1:1, 1:2, and 1:3 stoichiometry (metal:ligand) in CH(3)CN solutions. NMR and UV titration experiments revealed that their complexation behaviors were rarely influenced by ligand chirality but significantly affected by the nature of the counteranion and the concentration ratio of metal to ligand. The Tb(3+) and Eu(3+) complexes with these tripodal ligands exhibited characteristic luminescence spectra upon excitation for pyridine chromophores (260 nm), the intensities of which were largely dependent on the ligand chirality. The meso isomer of the disubstituted tripods particularly exhibited the enhanced terbium luminescence ca. three times more than its diastereomer and un- and monosubstituted tripods. Direct excitation at the lanthanide center had similar chirality effects on the luminescence profiles, indicating that the stereochemistry of the employed ligand largely influenced the lanthanide emitting processes. Since the ligand chirality finely modified the local coordination environments around the lanthanide center, the use of stereocontrolled ligands is applicable in design of the luminescent lanthanide complexes.

Journal Article↗
PubMed2006

Electrochemically deposited organic luminescent films: the effects of deposition parameters on morphologies and luminescent efficiency of films.

The electropolymerization behaviors of an electroactive and luminescent compound TCPC as precursor are studied. The resultant electrochemical deposition (ED) films are characterized by cyclic voltammetry (CV), UV-vis, fluorescence spectra, scanning electron microscopy (SEM), and atomic force microscopy (AFM). Under the CV mode with potential range of -0.5 to 0.85 V vs Ag/Ag(+), the coupling reactions between the carbazole units of TCPC are very efficient, while the fluorescent trifluorene segment in TCPC is chemically inert in this potential range, which results in a highly fluorescent film formation on indium tin oxide (ITO) electrode. The deposition parameters for preparing the TCPC-based ED films are optimized, and the best ED film gives the fluorescence efficiency of 45.5% with surface roughness of 2.8 nm and morphologic stability as heating to 180 degrees C. The light-emitting devices (LEDs) using this ED film as light emitting layer with structure ITO/ED film (approximately 100 nm)/Ba/Al achieve maximum luminescence and external quantum efficiency of 4224 cd/m(2) at 17 V and 0.72% at 11.5 V, respectively, which are better than the device using TCPC spin-coating films as emitting layer. The technique provides a facile route toward a patternable luminescent film and device because such luminescent ED films can be manipulatively deposited on the electrified electrode.

Journal Article↗
PubMedDate not supplied

Inhibition of luminol-dependent luminescence and simultaneous generation of native luminescence of activated human polymorphonuclear leukocytes by addition of albumin.

Luminol-dependent luminescence (LDL) and luminol-independent, native luminescence (NL) of polymorphonuclear leukocytes were investigated with respect to the effects generated by the addition of albumin to the reaction medium. The cells were activated: (1) by simple surface attachment to a hydrophilic plastic, (2) by opsonized zymosan, (3) by phorbol myristate acetate, (4) by formylmethionyl-leucyl-phenylalaline. Both kinds of emissions were recorded simultaneously using a method of spectral discrimination. The addition of albumin resulted in an inhibition of LDL, which coincided with a generation of NL. The extent of the inhibition of LDL depended on the type of stimulus used. Maximum inhibition occurred with cells activated by attachment to plastic surfaces and minimum inhibition was observed with cells stimulated by opsonized zymosan. Different contributions of extracellularly released reactive oxygen-species may be responsible for this. It appears possible to discriminate between intra- and extracellular sites of oxygen-metabolites production using albumin simultaneously as extracellular quencher of LDL and as luminescent probe for NL.

Humans↗
PubMed1989

A dual microtiter plate (192 sample) luminometer employing computer-aided single-photon imaging applicable to cellular luminescence and luminescence immunoassay.

In spite of the increasing applications of luminescence measurements, no instrumentation is yet commercially available that permits sensitive luminescence measurements to be performed simultaneously on a large number of samples. Based on the principle of single-photon imaging, we describe here the performance of a computer-aided image luminometer with a capacity for two microtiter plates. Applications to the study of chemiluminescence by a B lymphocyte cell line, and to an IgE luminescence immunoassay are used to exemplify the capabilities of the system, which we have termed 'chemiluminescence multiwell analyser'.

B-Lymphocytes↗
PubMed1984

An evaluation of four different luminescence immunoassay systems: CELIA (chemiluminescent immunoassay), SPALT (solid-phase antigen luminescence technique), ILMA (immunoluminometric assay) and ILSA (immunoluminometric labelled second antibody). A critical study of macro solid phases for use in immunoassay systems, Part III.

The performance of different solid-phase luminescence immunoassays has been documented using four different assay concepts. These are CELIA (chemiluminescence immunoassay), SPALT (solid-phase antigen luminescence technique), ILMA (immunoluminometric assay) and ILSA (immunoluminometric labelled second-antibody assay). CELIA is analogous to a solid-phase radioimmunoassay and uses a labelled antigen, SPALT and ILSA use a labelled second (species-specific) antibody and ILMA a labelled substance-specific antibody, i.e. analogous to the immunoradiometric assay. Both bioluminescent and chemiluminescent labels have been used. Pyruvate kinase was used for bioluminescence and diazoluminol and N-(4-amino-butyl)-N-ethyl isoluminol hemisuccinamide for chemiluminescence. Relevant quality-control parameters and reference ranges have been given for the optimised assays. Assays described are: thyroxine, thyroxine binding globulin, cortisol, caeruloplasmin, ferritin and C-reactive protein. Luminescence immunoassays with coefficients of variation comparable with radioimmunoassay have been designed, values of under 5% being obtainable within the working range of the assay.

Animals↗
PubMed2003

Luminescent nido-carborane-diphosphine anions [(PR2)2C2B9H10](-) (R = Ph, (i)Pr). Modification of their luminescence properties upon formation of three-coordinate gold(I) complexes.

The free nido-diphosphine anions [(PR(2))(2)C(2)B(9)H(10)](-) (R = Ph, (i)Pr) show luminescence properties whereas the closo-diphosphines [(PR(2))(2)C(2)B(10)H(10)] do not. Four families of three-coordinate complexes of stoichiometry [Au[(PR(2))(2)C(2)B(10)H(10)]L]OTf (L = tertiary phosphine) and [Au[(PR(2))(2)C(2)B(9)H(10)]L] have been studied in order to analyze the influence of the closo- or nido-nature of the diphosphine, the monophosphine coordinated to gold and the substituent at the diphosphine on the luminescence of the complexes. Only the nido-derivatives show luminescence. The maxima of the emissions are shifted to lower energies than those of the corresponding free nido-diphosphines. When the substituent at the diphosphine is phenyl, a new emission appears, which has been assigned as arising from a metal to ligand charge transfer [Au-->pi(L)] excited state.

Journal Article↗
PubMed1996

Theoretical Study and Luminescence Properties of the Cyclic Cu(3)(dppm)(3)OH(2+) Cluster. The First Luminescent Cluster Host at Room Temperature.

The [Cu(3)(dppm)(3)OH](BF(4))(2) cyclic cluster host is found to be luminescent at 298 K (lambda(max) = 540 nm; tau(e) = 89 +/- 9 &mgr;s; Phi(e) = 0.14 +/- 0.01) in degassed ethanol solutions and at 77 K (lambda(max) = 480 nm; tau(e) = 170 +/- 40 &mgr;s; Phi = 0.73 +/- 0.07) also in ethanol. The nature of the lowest energy excited states has been addressed theoretically using density functional theory and experimentally using UV-visible, luminescence, and polarized luminescence spectroscopy and is found to be (1,3)A(2) arising from the.(18e)(4)(7a(2))(1)(13a(1))(1) electronic configuration. The excited state geometry optimization for the model Cu(3)(PH(3))(6)OH(2+) compound in its T(1) state ((3)A(2)) has been performed using density functional theory and compared to its ground state structure. The Cu.Cu bond length is expected to decrease greatly in the excited state (calculated DeltaQ approximately 0.47 Å), in agreement with the d(10) electronic configuration. The perturbation of the photophysical properties by the addition of two guest carboxylate anions has been investigated. From the Stern-Volmer plots, the quenching constants, k(q), are 1.65 x 10(8) and 5.10 x 10(8) M(-)(1) s(-)(1) for acetate and 4-aminobenzoate, respectively, which are also proportional to the relative binding strengths of the substrates with Cu(3)(dppm)(3)OH(2+) (i.e., acetate < 4-aminobenzoate).

Journal Article↗
PubMed2004

Quantum chemistry-based interpretations on the lowest triplet state of luminescent lanthanides complexes. Part 1. Relation between the triplet state energy of hydroxamate complexes and their luminescence properties.

In this paper, we evaluate the potential use of theoretical calculations to obtain an energy scale of the lowest ligand-centred triplet excited state in luminescent terbium(III) complexes. In these complexes, non-radiative deactivation of the terbium emitting state via a back-energy transfer process (T1<--Tb(5D4)) is a common quenching process. Consequently the prediction of the energy gap between these two excited states should be useful for programming highly luminescent Tb(III) systems. We report on a strategy based upon experimental and theoretical investigations of the excited state properties of a series of four simple aromatic hydroxamate ligands coordinated to Tb(III) and Gd(III) ions. By using previously reported crystallographic data, the structural and energies properties of these systems were investigated in the ground and first excited triplet states at the density functional theory (DFT) level of calculations. Our theoretical results are consistent with a triplet excited state T1 which is localised on one ligand only and whose the energy level is independent of the lanthanide ion nature (Tb(III), Gd(III)). A good agreement between the calculated adiabatic transition energies and experimental data derived from emission spectra is obtained when a corrective term is considered. These satisfactory results are an indication that this type of modelling can lead to discriminate in terms of the position of the lowest ligand triplet energy level the best antenna among a family of chromophoric compounds. In addition this theoretical approach has provided indications that the difference between the adiabatic transition energies of all the investigated complexes can be mainly explained by metal-ligand electrostatic interactions. The influence of the number of antennae on the quantum yield and the luminescence lifetime is discussed.

Journal Article↗
PubMed2005

Luminescence anisotropy-based detection of nucleic acids and proteins using long-lifetime Ru(II) complex as a luminescent label.

Luminescence anisotropy-based methods are powerful tool for the detection of biomolecules in homogeneous physiological media without Bound/Free separation. However, analyses based on the method are always disturbed by the autofluorescence from biological specimen. This disturbance limits the sensitivity of the method. To improve the detection limit of the method, a long-lifetime luminophore was adopted as the label. Because of the lifetime of the autofluorescence is below 10 ns, it is expected that the use of the long-lifetime luminophore enables us to avoid the disturbance by adopting time-resolved luminescence anisotropy measurement. To verify this concept, oligodeoxyribonucleotides and Staphylococcus aureus protein A were labeled with Ru(II) complex (tau approximately 500 nsec) and used for the detection of Escherichia coli 16S ribosomal RNA (16S rRNA) and immunoglobulin G (IgG), respectively. Results indicated that the methods were useful for the detection of rRNA and IgG without disturbance of the autofluorescence.

Anisotropy↗
PubMed1992

Time-resolving luminescence techniques for possible detection of forest decline. I. Long term delayed luminescence.

Needles from spruces at different environmental and physiological conditions were analyzed by long term delayed luminescence in the seconds-range (LDL) using a novel set-up with on-line computer and a specially written computer program. Upon red light induction, the LDL-kinetics showed a super-position of three exponentially decaying components ("fast", "medium" and "slow") with reaction constants of kf = 5-15 s-1, km = 0.8-1.8 s-1 and ks = 0.13-0.23 s-1, ks-values are fairly independent of the individual tree and quite stable throughout the whole year. They are also independent of the status and localization, i.e. the physiological situation of the individual tree. However, km- and kf-values as well as the related amplitudes Am and Af exhibit a general, significant seasonal variation and obviously are correlated with the damage class or the environmental situation of the individual tree. Therefore, the measurement of long term delayed luminescence might offer a valuable piece of information in search of an early detection of forest decline.

Ecology↗
PubMed2006

High luminescence quantum yields and long luminescence lifetime from Eu(III) complex containing two crystal water based on a new beta-diketonate ligand.

New members of family of Eu(III) complex based on the thenoylacetophenone have been synthesized and characterized. The compounds were found for high metal luminescence quantum yields and long luminescence lifetime, especially for compound with two crystal water, corresponding with other compounds containing two crystal water. The result is attributed to high molar absorption coefficients of the Eu(III) complex according to UV-vis and emission spectra. The high molar absorption coefficients balance quenching effect from OH oscillators of water contained in compound.

Acetophenones↗