PubMed HealthSearch

SEARCH · PubMed Health

Results for “Lubrication”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

A microbiological comparison of a povidone-iodine lubricating gel and a control as catheter lubricants.

A randomized, controlled study tested the value of a povidone-iodine (PVP-I) lubricant ('Betadine' lubricating gel), in preventing microbial contamination of bladder urine during catheterization. Urine samples, for culture, were obtained by suprapubic aspiration both before passage, and after removal 15 min later, of a no. 16 Foley catheter coated with the test lubricant or with a control preparation ('K-Y' lubricating jelly). Each treatment group included 10 men and five women. Swab cultures of the anterior urethra, taken immediately before catheterization, demonstrated substantial urethral contamination. Thirteen test subjects and 15 controls qualified for the efficacy analysis and all 30 took part in the safety evaluation. Before catheterization, mean colony counts per 5 ml urine numbered 0.3 in the (PVP-I) treated group and 0.4 among controls. After catheter passage, the mean counts were respectively, 3.6 and 69.6 per 5 ml. Thus, catheters coated with PVP-I lubricating gel transported significantly fewer (P less than 0.03) viable contaminants to bladder urine than those covered with 'K-Y' jelly. The organisms most frequently identified in urethral swabs and pre-study midstream clean-catch specimens also predominated in post-catheterization urine, but their incidence was considerably lower among the PVP-I treated subjects than among controls. Lubricity, cohesiveness and adhesiveness were more satisfactory in the test group than in the control series. No adverse reactions occurred and both preparations, as well as the mechanical procedures, were well tolerated. The findings demonstrated the efficacy of the PVP-I lubricant in preventing transfer of viable urethral organisms to the bladder during catheterization.

Adult

Characterization of a bovine synovial fluid lubricating factor. I. Chemical, surface activity and lubricating properties.

A lubricating glycoprotein (PSLF) with an apparent molecular weight of 280 kDa was purified from bovine synovial fluid by anion exchange, molecular sieve chromatography, and density gradient centrifugation. Lubrication was measured under boundary conditions as lowering of the coefficient of friction (mu) between oscillating natural latex and polished glass. Lubricating ability was first observed at a concentration of 200 micrograms/ml and became maximal at 260 micrograms/ml. Hydrophobic interfacial tension measurements indicated that at the former concentration, monolayers of PSLF formed. Sugar digestions showed that lubricating ability depends upon the terminal galactose of the molecule. PSLF is similar if not identical to lubricin. It is proposed that a repulsive hydration force is the molecular mechanism for lubricating activity.

Amino Acids

Mechanism of surface lubrication: influence of duration of lubricant-excipient mixing on processing characteristics of powders and properties of compressed tablets.

A mathematical expression for tablet hardness was related to lubricant mixing by considering increases in the surface coverage with prolonged mixing time. The duration of lubricant mixing significantly changed the apparent bulk volume of the mix, ejection force during tableting, hardness, and disintegration and dissolution properties of tablets. These findings may provide some rationale for the changes in processing characteristics and properties of finished drug products often encountered in the scale-up of solid dosage formulations. Several lubrication mechanisms are discussed in connection with the duration of mixing effects and scanning microscopy studies.

Drug Compounding

[Identification of automotive lubricants and other heavy oils by isotachophoresis].

Automotive lubricants were analysed by isotachophoresis for the purpose of identification of lubricants and suspected stains adhered to victims in traffic accidents. As the results, it was found that each lubricant showed a characteristic isotachophreogram even if they were manufactured by the same maker, and that the isotachopherogram of the lubricant changed in proportion to the running distance of an automobile. Each lubricant had its own changing rate. Moreover, A, B, C heavy oils, asphalt, soy sauce and sauce, which apparently resembled lubricants when they adhered to victims, were analysed with this method. They were found to be clearly different from lubricants in isotachopherogram and they could be discriminated from lubricants. Therefore, it was found that lubricants could be easily identified or discriminated from other lubricants such as engine oils, gear oils and other oils by comparing their isotachopherograms obtained with this method in a short time. It was, however, difficult to suggest the maker of a lubricant from isotachopherogram. We conclude from these observations that isotachophoresis method is useful for the analysis of lubricants in case of traffic accidents.

Accidents, Traffic

Influence of stone mixing agents, impression materials and lubricants on surface hardness and dimension of a dental stone die material.

The influence of different stone mixing agents, impression materials and lubrication methods on the surface hardness of a stone die material has been evaluated. For one impression material the dimensional effect of the mixing agents and lubrication on the dies was also studied. The stone die material was mixed with water or a gypsum hardener and allowed to set on surfaces of glass, agar-agar, polyether, polysulfide and silicone impression materials. The lubrication methods for the stone were mineral oil, water soluble lubricant and mineral oil followed by water soluble lubricant. The surface hardness was measured according to the Brinell test. The Brinell test was chosen after a comparative study of the Brinell, Vickers and Knoop hardness test methods. The results showed that gypsum hardener was preferable to distilled water. The impression materials appear to have influence on the surface hardness of stone. The effect differed on water mixed and hardener mixed stone which emphasizes the importance of the mixing agent. All lubrication decreased the surface hardness of stone. With hardener mixed stone the combination of mineral oil followed by water soluble lubricant seemed preferable. Neither the gypsum hardener nor the lubrication influenced the dimension of the stone die material.

Dental Impression Materials

Influence of the granulation technique and starting material properties on the lubricating effect of granular magnesium stearate.

Magnesium stearate has been granulated in four ways to produce lubricant granulations with different properties. The lubricating properties, as well as the tablet properties with the granulated lubricant, were evaluated on tablets prepared from a mixture of dicalcium phosphate, corn starch and microcrystalline cellulose. The lubricating effect of the magnesium stearate granulations showed a similar pattern regardless of the granulation technique used except for a granulation with providone. Increasing the particle size of the magnesium stearate granulation increased the amount of lubricant required to obtain lubrication similar to powdered magnesium stearate. Variations in the specific surface area of the starting materials could be masked by using them in granular form.

Chemistry, Pharmaceutical

Variations in the friction coefficients of tablet lubricants and relationship to their physicochemical properties.

A previously described modified annular shear cell (MASC) has been used to measure the friction coefficients of some powdered tablet lubricants on a steel surface. Commonly used lubricants, as well as others belonging to the stearate group, differed in their friction coefficients at equivalent sample sizes and in the degree of their ability to reduce friction with increasing amounts when evaluated by the apparatus. In all comparisons, magnesium stearate had the lowest friction coefficient. Divalent salts of stearic acid appeared to be better than the other lubricants tested, and among themselves differed only in the extent of their ability to decrease friction. The lubricants also differed in their physical and chemical properties. On evaluation by stepwise regression analysis, such physical properties as projected surface area of lubricant particles, Martin's diameter and bulk density accounted for most of the variation in friction coefficients of the lubricants rather than moisture content or melting point. It could therefore be suggested that particle size and/or surface area parameters be incorporated in product specifications to ensure reproducible functionality.

Chemical Phenomena

Inappropriate lubricant use with condoms by homosexual men.

Use of condoms has been advocated as an important method of reducing the risk of human immunodeficiency virus (HIV) transmission among high-risk groups such as homosexual and bisexual men, prostitutes, intravenous drug users, adolescents, and hemophiliacs. Despite risk-reduction education campaigns directed to gay men since the early 1980s, evidence shows continued deficits in condom-use skills and knowledge among gay men. Because most failures in the use of condoms are attributed to errors in use, increasing knowledge and skills in condom use is important in preventing HIV infection. Two groups of homosexual and bisexual men were sampled, those entering a risk-reduction education program and participants in a Gay Pride event. They were surveyed on their current sex practices and their efforts to reduce their risk of HIV infection. They were asked about their numbers of sex partners, specific sexual behaviors, use of condoms, types of condoms used, and lubricants used for genital-anal sex. The characteristics of those surveyed were similar to those of respondents in other studies of risk reduction among gay men. The use of an oil-based lubricant with condoms has been shown to weaken latex and to increase the likelihood of condom breakage, which use of water-based lubricants does not. Among respondents who reported having genital-anal sex, 60 percent reported use of an oil-based lubricant with a condom at least once during the year before the survey. Gay men in sexually exclusive relationships engaged in less consistent use of condoms for receptive genital-anal sex than did single gay men. The duration of their relationship with a partner was unrelated to the consistency of risk reducing behaviors practiced by men in sexually exclusive relationships. Gay Pride participants engaged in sexual behavior that was relatively more risky for HIV transmission than did the other group. Gay Pride participants used condoms less consistently for genital-anal sex than did the risk-reduction program entrants.The findings indicate the need for better risk reduction education efforts directed to gay men. Continued improvement in these efforts will require assessing the effectiveness and consistency of risk reduction efforts, determining the potential for gay men to relapse into more risky behavior, and identifying gaps in the knowledge of risk-reduction efforts among gay and bisexual men. Risk reduction programs need to emphasize motivational factors, provide basic information on how one determines the content of lubricants, explain why water-based lubricants only should be used, and teach how to use condoms properly. Active outreach is needed to gay and bisexual men who are unlikely to voluntarily enroll in risk-reduction programs.

Adult

Lubrication and cartilage.

Mechanisms of lubrication of human synovial joints have been analysed in terms of the operating conditions of the joint, the synovial fluid and articular cartilage. In the hip and knee during a walking cycle the load may rise up to four times body weight. In the knee on dropping one metre the load may go up to 25 time body weight. The elastic modulus of cartilage is similar to that of the synthetic rubber of a car tyre. The cartilage surface is rough and in elderly specimens the centre line average is 2-75 mum. The friction force generated in reciprocating tests shows that both cartilage and synovial fluid are important in lubrication. The viscosity-shear rate relationships of normal synovial fluid show that it is non-Newtonian. Osteoarthrosic fluid is less so and rheumatoid fluid is more nearly Newtonian. Experiments with hip joints in a pendulum machine show that fluid film lubrication obtains at some phases of joint action. Boundary lubrication prevails under certain conditions and has been examined with a reciprocating friction machine. Digestion of hyaluronate does not alter the boundary lubrication, but trypsin digestion does. Surface active substances (lauryl sulphate and cetyl 3-ammonium bromide) give a lubricating ability similar to that of synovial fluid. The effectiveness of the two substances varies with pH.

Cartilage, Articular

Boundary lubricating ability of synovial fluid in degenerative joint disease.

The boundary lubricating ability of eleven synovial fluids was measured in a miniaturized latex--glass test system. The specimens were obtained at necropsy from knees in which the degree of degenerative joint disease varied from none to very severe. The lubricating ability of the fluid was independent of the viscosity over a wide range of shear rates. It was not diminished even in advanced lesions. In two additional fluids, the mucin clot was poor; the lubricating ability of one of these was compromised. Thus, although degenerative joint disease, during its quiescent stages, is not associated with defective synovial lubrication, the possibility that transient defects might lead to cartilage wear during life has not been excluded. The measurements are believed to be valid indicators of boundary lubricating ability under physiological conditions despite the fact that the test surfaces were not cartilaginous and the loading was relatively low (up to 47 pounds per square inch).

Adult

An analysis of the squeeze-film lubrication mechanism for articular cartilage.

An asymptotic analysis of a lubrication problem is presented for a model of articular cartilage and synovial fluid under the squeeze-film condition. This model is based upon the following constitutive assumptions: (1) articular cartilage is a linear porous-permeable biphasic material filled with a linearly viscous fluid (i.e. Newtonian fluid); (2) synovial fluid is also a linearly viscous fluid. The geometry of the problem is defined by assuming that (1) cartilage is a uniform layer of thickness H; (2) synovial fluid is a very thin layer compared to H; (3) the radius R of the load-supporting area (or the effective radius of curvature of joint surface, Ri) is large compared to H. Squeeze-film action is generated in the lubricant by a step loading function applied onto the two bearing surfaces. The model assumptions and the material properties yield two small parameters in the mathematical formulation. Based on these two small parameters, two coupled nonlinear partial differential equations were derived from an asymptotic analysis of the problem: one for the lubricant (analogous to the Reynolds equation) and one for the cartilage. For known properties of normal cartilage, our calculations show: (1) the cartilage layer deforms to enlarge the load-supporting area; (2) cartilage deformation acts to reduce the lateral fluid speed in the lubricant, thus prolonging the squeeze-film time which ranges from 1 to 10 s; (3) lubricant fluid in the gap is forced from the central high-pressure region into cartilage, and expelled from the tissue at the low-pressure periphery of the load-bearing region; and (4) tensile hoop stress exists at the cartilage surface despite the compressive squeeze-film loading condition. This hoop stress results directly from the radial flow of the interstitial fluid in the cartilage layer.

Biomechanical Phenomena

Effects of lubrication on the retention of tapered and parallel cast post and cores.

The effects of lubrication on the retention of parallel-sided and tapered cast post and cores cemented with zinc phosphate-cement (ZnPO4) and glass ionomer cements were investigated. Seventy-two maxillary canine teeth of similar size were selected for direct, parallel-sided post and core castings. The canines were sectioned at the cementoenamel junction and mounted in resin blocks. A post space was prepared to 1.5 mm (d) x 10 mm (I) with a handpiece mounted in a surveyor. The teeth were divided into four groups: ZnPO4 without lubricant, ZnPO4 with lubricant rinsed with water, ZnPO4 with lubricant removed by solvent, and ZnPO4 with solvent alone. The same four groups were made by using glass ionomer cement. Retention was tested with a 4200 series Instron machine by pulling the castings out of the teeth. There were no significant differences in retention among the eight groups of parallel posts at alpha = 0.05. The testing procedure was repeated by using an 11 mm post with 6 degrees of taper. With tapered posts, a statistically significant reduction in retention was found in the lubricated samples when compared to the nonlubricated samples.

Analysis of Variance

Demonstration of boundary lubrication by synovial fluid.

An account is given of an oscillatory rotating friction measurement apparatus which can be used for demonstration of boundary lubrication by synovial fluid when rubber and glass are employed as rubbing surfaces. A technical description of the apparatus is given. The greatest importance is placed on getting the apparatus to demonstrate reproducible results when saline and normal bovine synovial fluid are used as lubricant. The greatest variations are caused by differences in the cleaning of the rubber and in its tension. On the basis of bovine synovial fluid from ten different hock joints investigations were made of individual variations and changes occurring during storage at 4 degrees C. The individual variations were found to be of no importance; a decrease in the lubricating effect was observed only after storage for two months. Addition of trypsin confirmed that boundary lubrication by synovial fluid can be related to the protein component. The conclusion is that the apparatus is considered suitable for clinical investigations of boundary lubrication in connection with different joint diseases.

Animals

The effect of soft lens lubricants on symptoms and lens dehydration.

In order to establish the efficacy of soft lens lubricants and their mode of action, we conducted a controlled, double-masked, randomized study. Symptoms of dryness as well as lens water content were assessed in 30 symptomatic hydroxyethylmethacrylate (HEMA) contact lens wearers who each applied either saline or one of two soft lens lubricants every 2 hours over a 6-hour wearing period. Short- and long-term symptomatic relief from ocular dryness was provided by both lens lubricants (ANOVA, P less than .05). However, neither lubricant was found to be significantly superior to saline. Contact lens dehydration was not significantly reduced by the instillation of any solution. A psychological rather than a physical (lens hydration) or physiological basis to the symptomatic relief provided by soft lens lubricants cannot be discounted.

Adolescent

Graphite-like lubrication of mesothelium by oligolamellar pleural surfactant.

Six studies have been completed to reevaluate pleural surfactant as a possible boundary lubricant in mesothelial sliding. It is capable of remarkable antiwear action, giving a mean scar diameter on a standard "four-ball test" comparable to the best commercially available lubricants and reducing friction to values anticipated from lamellated solid lubricants such as graphite. Pleural surfaces displayed appreciable hydrophobicity, which was almost eliminated by rinsing with a lipid solvent from which phospholipid was recovered and quantified. These quantities indicated that equivalent of 7.3 adsorbed monolayers of surface-active phospholipid, which was in general agreement with the number of layers of a graphite-like surface coating visualized by electron microscopy by use of a novel fixation procedure that avoids conventional aldehydes known to destroy hydrophobic surfaces. Graphite-like (dry) lubrication by adsorbed surface-active phospholipid is discussed as an excellent lubrication system available wherever the distribution of fluid allows the pleura to make contact.

Animals

The effect of porosity of articular cartilage on the lubrication of a normal human hip joint.

The effect of porosity of articular cartilage on the lubrication of a normal human hip joint has been studied. The poroelasticity equation of articular cartilage and the modified Reynolds equation for the synovial fluid lubricant have been successfully solved under squeeze-film motion and for the conditions experienced in a normal human hip joint. It has been shown that porosity of the articular cartilage depletes the lubricant film thickness, rather than increasing it, particularly when the lubricant film thickness becomes small. Furthermore, it has been shown that articular cartilage can be treated as a single-phase incompressible elastic material in the lubrication modelling under physiological walking conditions.

Cartilage, Articular

Evaluation of Astroglide, a new vaginal lubricant: effects of length of exposure and concentration on sperm motility.

Traditional vaginal lubricants have been shown to adversely affect sperm motility. Astroglide, a new vaginal lubricant, and K-Y Jelly were tested at varying concentrations to assess their suitability for infertility patients requiring a lubricant. The vaginal lubricants tested impaired sperm motility in a concentration-dependent but not time-dependent manner. We conclude that all traditional vaginal lubricants should be avoided in patients desiring conception. Future studies should attempt to mimic in vivo conditions and focus on concentration-dependent effects.

Cellulose

Physical and lubrication properties of magnesium stearate.

The lubrication properties of two commercial-grade magnesium stearates were studied. Their moisture contents and crystal structures were similar. There were minor differences in their fatty acid composition, but the differences did not affect the lubrication properties. The lubrication properties correlated with particle size distributions and specific surface area. The effect of these parameters was further studied with unmilled and milled chemically pure magnesium stearate. Milling decreased the particle size and increased the specific surface area. In both cases, the batch with a smaller particle size and larger specific surface area had considerably better lubricity.

Adjuvants, Pharmaceutic