Preparation of ribohomopolymers of defined length.
Explore the source record for details and available documents.
SEARCH · PubMed Health
Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The enzymatic polymerization by polynucleotide phosphorylase of 6-chloro-9-(beta-D-ribofuranosyl)purine 5'-diphosphate to poly(6-chloropurinylic acid) and its conversion to poly(6-thioninosinic acid) is described. The sulfur isostere of poly(I) was found not to form a complex with poly(C), but to form a self-association complex with a Tm around 295 degrees K. The sedimentation velocities, pKa and Tm values of the polymer have been examined under various conditions. A two (or more) stranded helical array is suggested as the most probable structure. Thermal loss of the thione chromophore was noted for poly- (S6I), S6IMP and S6I; the degradation product from S6I was shown to be inosine.
The synthesis of 1-methyl-6-thioguanosine 5'-diphosphate and its conversion to poly(1-methyl-6-thioguanylic acid) by means of polynucleotide phosphorylase are described. The polymer exhibited cooperative behavior (Tm = 294 K in the absence of added NaCl) characteristic of a highly stacked single-stranded helical array. In a high salt environment (0.5 M NaCl) the melting was much less cooperative and gave a higher Tm (313 K); this is suggestive of interstrand aggregation involving hydrogen bonding. The polynucleotide exhibited a remarkably high pKa (6.2) compared to that of the mononucleotide (2.6), and formed a very stable acid structure (Tm = 356 K in 50% ethylene glycol). Comparisons with poly(1-methyl-6-thioinosinic acid) and poly(6-thioguanylic acid) establish that both the 2-amino group and the 1-methyl group are required for the formation of the stable acid structure.
Chemically synthesized 2-azaadenosine 5'-diphosphate (n2ADP) and 2-azainosine 5'-diphosphate (n2IDP) were polymerized to yield poly(2-azaadenylic acid), poly(n2A), and poly(2-azainosinic acid), poly(n2I), using Escherichia coli polynucleotide phosphorylase. In neutral solution, poly(n2A) and poly(n2I) had hypochromicities of 32 and 5.5%, respectively. Poly(n2A) formed an ordered structure, which had a melting temperature (Rm) of 20 degrees C at 0.15 M salt concentration. Upon mixing with poly(U), poly(n2A) formed a 1 : 2 complex with Tm of 41 degrees C at 0.15 M salt concentration. Poly(n2A) and poly(n2I) formed three-stranded complexes with poly(I), and poly(A), respectively. Poly(n2A) . 2poly(I), poly(A) . 2poly(n2I), and poly(n2A) . 2poly(n2I) complexes had Tm values of 23, 48, and 31 degrees C at 0.15 M salt concentration, respectively. Poly(n2I) formed a double-stranded complex with poly(C), but its Tm was very low.
The polymerization of 2-fluoroadenosine 5'-diphosphate by polynucleotide phosphorylase to give high molecular weight poly(2-fluoroadenylic acid), poly(fl2A), is described. Both the single-stranded and double-stranded (acid) forms of poly(fl2A) exhibit strikingly similar ultraviolet and circular dichroism spectra to those of poly(A), and the enzymatic polymerization rates and thermal hyperchromicities of the two polymers are also very similar. However, the pKa of poly(fl2A) for protonation at N-1 is 2.9 compared to 5.9 for poly(A) under similar conditions. Poly(fl2A) forms a triple-stranded helix with poly(U) which has ultraviolet and cd spectra very reminiscent of poly(A) . 2 poly(U), but no conditions could be found which permitted the formation of a double helix. In the Escherichia coli ribosome system poly(fl2A) codes for the synthesis of polylysine, as does poly(A), although the rate and extent of incorporation were less in the former case. The role of basicity of adenine N-1 in these interactions is discussed.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The synthesis of poly(2-amino-6-chloropurinylic acid) [poly(n2cl6Pu)] by the polynucleotide phosphorylase catalyzed polymerization of 2-amino-6-chloro-9-(beta-D-ribofuranosyl)purine 5'-diphosphate and its chemical conversion to poly(6-thioguanylic acid) [poly(s6G)] is described. Poly(s6G) was found to form a relatively unstable complex with poly(C), the properties of which were incompatible with those previously reported for the same complex prepared by another method [Darlix, J.L., Fromageot, P., and Reich, E. (1973), Biochemistry 12, 914]. It was found that poly(s6G) could be thermally converted to a copolymer of which with poly(C) was strikingly similar to that reported earlier for poly(s6G)-poly(C).
Poly(8-aminoguanylic acid) has in neutral solution a novel ordered structure of high stability. The 8-amino group permits formation of three hydrogen bonds between two residues along the "top", or long axis, of the purines. The usual hydrogen bonding protons and Watson-Crick pairing sites are not involved in the association. The bonding scheme has a twofold rotation axis and is hemiprotonated at N(7). Poly(8NH2G) is converted by alkaline titration (pK = 9.7) to a quite different ordered structure, which is the favored form over the range approximately pH 10-11. The bonding scheme appears to be composed of a planar, tetrameric array of guanine residues, in which the 8-amino group does not participate in interbase hydrogen bonding. Poly (8NH2G) does not interact with poly(C) in neutral solution because of the high stability of the hemiprotonated G-G self-structure. Titration to the alkaline plateau, however, permits ready formation of a two-stranded Watson-Crick helix. In contrast to the monomer 8NH2GMP, poly(8NH2G) does not form a triple helix with poly(C) under any conditions. The properties of the ordered structures are interpreted in terms of a strong tendency of the 8-amino group to form a third interbase hydrogen bond, when this possibility is not prevented by high pH.
2'-O-o-Nitrobenzyluridine, -cytidine and -adenosine were phosphorylated with phosphoryl chloride to the corresponding 5'-phosphates and led to 5'-diphosphates by the method of Moffatt and Khorana. These 2'-O-oNB-nucleoside 5'-diphosphates were incubated with a primer CpApA and polynucleotide phosphorylase in the presence of Mn2+. Tetranucleotides CpApApU, CpApApC and CpApApA were obtained after photosensitive removal of oNB groups in yields of 54-70%.
Poly 2'0-ethylcytidylic acid (poly (Ce)) was prepared by polymerization of 2'-0-ethylcytidine-5'-pyrophosphate with Escherichia coli polynucleotide phosphorylase in the presence of Mn++, and its properties compared with those of poly (rC), poly (Cm) and poly (dC). The neutral form of pOLY (Ce) exhibits properties similar to those of poly (rC) and poly (Cm). It also forms an acid twin-stranded helix with a transition pH of 5.9 in 0.1 M NaCl. The neutral form readily forms a double-stranded helical complex with poly (rI). Relative to poly (Cm), replacement of the 2'-0-methyl by 2-0-ethyl leads to increased enhancement of the thermal stabilities of both the acid helical form of poly (Ce) and its complex with poly (rI).
The polymerization of 2'deoxy-2'-fluoro-cytidine-diphosphate (dCflDP) by polynucleotide phosphorylase is barely detectable in the presence of Mg++ under usual experimental conditions for polymerization of nucleoside diphosphates. High concentrations of enzyme have to be used to accomplish the synthesis. Mn++ is a better activator than Mg++ for the reaction. cCflDP inhibits the polymerization of CDP and has a Km=8.8X10-3M, six times higher than CDP.- The polymer, poly (dCfl), ressembles in many respects poly(C), but not poly(dC): the acid selfstructure forms at similar pK's; interaction with poly(I) yields a 1:1 complex the CD spectrum of which is similar to that of poly(I).poly(C). Finally, the Tm's of poly(I).poly(dCfl) are comparable to those of poly(I).poly(C).
Poly (2'-chloro-2'-deoxyinosinic acid) [poly(Icl)] was synthesized from Icl 5'-DP by polymerization with polynucleotide phosphorylase. UV absorption properties of poly(Icl) are very similar to those of poly(I). Poly(Icl) adopted a multi-stranded ordered form in the presence of 0.95M Na ion. The Tm value of this form was 36 degrees, which resembles that of poly(I) quadruple-stranded form at high salt. CD spectra also suggested presence of these two forms. Upon mixing with poly(C), poly-(Icl) forms a double-stranded 1 : 1 complex, which had very similar Tm-log[Na+] relationship to that of poly(I) . poly(C). Thus it was concluded that the chlorine substitution at 2'-position of the polynucleotide had the similar effect to OH on physical properties of polynucleotides.
Explore the source record for details and available documents.
Isoguanosine-5'-pyrosphosphate, in the presence of an oligonucleotide primer, was polymerized by Escherichia coli polynucleotide phosphorylase under conditions analogous to those required for polymerization of 5'-GMP. The resulting poly(isoguanylic acid), poly(isoG), was a multistranded helix with a stability considerably higher than that of poly(G), and fully resistant to various nucleolytic enzymes. The polymer exhibited a two-step temperature transition profile in moderately alkaline propylene glycol. Alkaline titration in aqueous medium, by ultraviolet and circular dichroism spectroscopy, showed two clearly defined transitions, the second of which was fully cooperative. The accompanying changes in sedimentation constants were consistent with a structure for poly(isoG) of a fourstranded helix, like neutral poly(G). In acid medium, spectral and potentiometric titrations demonstrated the existence of more than one transition in the pH range 6-12, with accompanying protonation of the isoguanosine residues. In neutral medium the polymer formed no complexes with other potentially complementary homopolymers. In acid medium, on the other hand, the protonated form of poly(isoG) did form a triple-stranded complex with poly(I), viz. 2poly(I) . poly(isoG)+. Possible structures are formulated for the neural and protonated forms of poly(isoG) which account for the two-step thermal transition in alkaline propylene glycol and on alkaline titration in aqueous medium. The nature of the protonated form, and its complex with poly(I) is also discussed.
Several pure poly(I) preparations differed in: (a) their complement fixation reactivity with anti-poly(I) antiserum; (b) their ability to bind to a solid-phase anti-poly(I) antibody-Sepharose column; (c) their ability to inactivate serum complement; and (d) their reactivity with purified antibodies to double-stranded RNA. In particular, poly(I) samples that could induce interferon production differed from non-inducer poly(I)s; the inducers reacted weakly with anti-poly(I) antiserum and were the only ones that reacted with antibodies to double-stranded RNA. One inducer poly(I) did not inactivate complement, and differed from non-inducer poly(I) in quantitative aspects of poly(I) . poly(C) formation with varying amounts of poly(C). An additional type of poly(I) preparation reacted poorly with anti-poly(I) antiserum, did not react with anti-double-stranded-RNA antibodies and failed to induce interferon production. The varying forms of poly(I) were not interconvertible by boiling and rapid chilling. These results indicate that several different stable structural forms of poly(I) may result from a standardized synthetic procedure.