Proflavine, proflavine dihydrochloride, proflavine hemisulphate and proflavine monohydrochloride.
Explore the source record for details and available documents.
SEARCH · PubMed Health
Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The crystal structure of a disordered 1:1 complex between the tetradeoxyoligomer d(5BrC-G-5BrC-G) and proflavin has been determined and refined to an R factor of 26.9% for 474 reflections initially in space group P6(5) and to an R factor of 22.2% for 475 reflections in space group P2(1), both at 2-A resolution with Fobsd greater than or equal to 4.0. The unit cell constants are a = b = 17.9 A, c = 44.5 A, and gamma = 120 degrees. The final models are essentially the same in the two space groups with greater disorder in space group P6(5). In space group P2(1), the asymmetric unit is a tetranucleotide duplex, two sandwiched proflavin molecules, and four "outside-bound" proflavins. The tetranucleotide duplex is in the Z conformation and is located at the origin of the unit cell with a pair of proflavins sandwiched between the tetranucleotides. Thus, the tetranucleotides and proflavin dimers stack alternatively forming a quasi-continuous helix with the helix axis coincident with the c axis. The structure analysis revealed the presence of outside-bound proflavins as well. It is interesting that one type of outside-bound proflavins occupies a similar environment as the cobalt hexaammines in their complex with the decadeoxyoligomer d(CGTACGTACG) [Brennan, R. G., Westhof, E., & Sundaralingam, M. (1986) J. Biomol. Struct. Dyn. 3, 649]. Crystals of the latter are isomorphous to the present complex. The outside-bound proflavins penetrate the deep minor groove, thereby closing it off, and provide a visualization of a quasi-internal mode of binding of proflavin to a nucleic acid.
DNA context-specific effects of the association of proflavin, single-stranded DNA and DNA polymerase on DNA polymerization reactions were examined. Frameshift mutations induced by the presence of proflavin during in vitro DNA replication of a single-stranded DNA template by the Klenow fragment of Escherichia coli DNA polymerase I were sequenced. More than 80% of the frameshifts were one base-pair deletions opposite purine bases that were immediately 3' to pyrimidines. Purines (Pu) that were not adjacent to pyrimidines (Py) were not deletion sites. The remaining deletions were opposite template pyrimidines that were also immediately 3' to another pyrimidine. All pyrimidine site deletions occurred in the context 5' PyPyPu 3'. In additional experiments, the site-specific inhibition of processive DNA polymerization by proflavin was examined. A novel inhibition of polymerization was found opposite all pyrimidines in the template when proflavin-template complexes were exposed to ten seconds of white light. This inhibition of polymerization is reversible. Longer photoactivation led to an altered pattern of DNA sequence-specific inhibition that was not reversible. The role of DNA sequence-specific interactions of proflavin with DNA in proflavin mutagenesis is discussed.
The equilibria and kinetics of the interactions of proflavine (PR) and its platinum-containing derivative [PtCl(tmen)(2)HNC(13)H(7)(NHCH(2)CH(2))(2)](+) (PRPt) with double-stranded poly(A) have been investigated by spectrophotometry and Joule temperature-jump relaxation at ionic strength 0.1 M, 25 degrees C, and pH 5.2. Spectrophotometric measurements indicate that base-dye interactions are prevailing. T-jump experiments with polarized light showed that effects due to field-induced alignment could be neglected. Both of the investigated systems display two relaxation effects. The kinetic features of the reaction are discussed in terms of a two-step series mechanism in which a precursor complex DS(I) is formed in the fast step, which is then converted to a final complex in the slow step. The rate constants of the fast step are k(1) = (2.5 +/- 0.4) x 10(6) M(-1) s(-1), k(-1) = (2.4 +/- 0.1) x 10(3) s(-1) for poly(A)-PR and k(1) = (2.3 +/- 0.1) x 10(6) M(-1) s(-1), k(-1) = (1.6 +/- 0.2) x 10(3) s(-1) for poly(A)-PRPt. The rate constants for the slow step are k(2) = (4.5 +/- 0.5) x 10(2) s(-1), k(-2) = (1.7 +/- 0.1) x 10(2) s(-1) for poly(A)-PR and k(2) = 9.7 +/- 1.2 s(-1), k(-2) = 10.6 +/- 0.2 s(-1) for poly(A)-PRPt. Spectrophotometric measurements yield for the equilibrium constants and site size the values K = (4.5 +/- 0.1) x 10(3) M(-1), n = 1.3 +/- 0.5 for poly(A)-PR and K = (2.9 +/- 0.1) x 10(3) M(-1), n = 2.3 +/- 0.6 for poly(A)-PRPt. The values of k(1) are similar and lower than expected for diffusion-limited reactions. The values of k(-1) are similar as well. It is suggested that the formation of DS(I) involves only the proflavine residues in both systems. In contrast, the values of k(2) and k(-2) in poly(A)-PRPt are much lower than in poly(A)-PR. The results suggest that in the complex DS(II) of poly(A)-PRPt both proflavine and platinum residues are intercalated. In addition, a very slow process was detected and ascribed to the covalent binding of Pt(II) to the adenine.
The interaction of the cis-platinum derivative of proflavine [[PtCl(tmen)(2)][HNC(13)H(7)(NHCH(2)CH(2))(2)]](+) (PRPt) with CT-DNA is investigated by spectrophotometry and T-jump relaxation in 0.11M NaCl, pH 7.0, and 25 degrees C. The DNA-proflavine (PR) system is investigated under the same conditions. Static measurements indicate that base-dye interactions prevail and their analysis reveals that the site size for PRPt (n=2.6) is twice that found for PR (n=1.3). One relaxation effect is observed for the DNA/PR system and two effects for the DNA/PRPt system, the faster of them being similar to that of DNA/PR. The kinetics of the process are discussed in terms of the three-step sequence D+S <= => DS(I) <= => DS(II) <= => DS(III), where PR and the aromatic residues of PRPt intercalate into DNA by the same mechanism. The third step represents the penetration of platinum residues between base-pairs and is associated to remarkable enthalpy and entropy changes. Further mechanistic details are discussed.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Both Escherichia coli B and a proflavine-resistant mutant, E. coli B/Pr, took up the same amounts of proflavine when suspended in buffer containing the dye. In growth media, however, sensitive cells took up more proflavine than did resistant cells. Adding growth media or any one of several constituents of these media, including amino acids, glycerol, pyruvic acid, and metabolizable sugars, to resistant cells that had taken up proflavine in buffer caused them to lose the dye, but had less or no effect on sensitive cells. Certian salts caused an equal release of proflavine from resistant and sensitive cells. Proflavine released from resistant cells by glucose was not changed chemically. The effects of temperature and metabolic inhibitors suggest that proflavine uptake is a passive process but that its release may be an active one, dependent on metabolism. Glucose had more effect on the proflavine binding of E. coli B grown in a minimal medium than on that of cells grown in a complex medium. E. coli B was less susceptible to proflavine when growing in a minimal medium. The effects of other synthetic media on proflavine susceptibility of E. coli B were also studied. Deoxyribonucleic acid and envelopes from sensitive and resistant cells bound the same amounts of proflavine, and no difference was seen in the site of dye binding when sensitive and resistant cells that had taken up proflavine in buffer were sonically broken and fractionated. The results suggest that sensitive and resistant cells are equally permeable to proflavine but differ in the ease with which metabolites cause them to release bound proflavine. So far, however, these differences do not account completely for the ability of resistant cells to grow in high proflavine concentrations.
Cells of proflavine-sensitive and -resistant Escherichia coli strains were altered in different ways, and the proflavine binding of the changed material was studied. Spheroplasts prepared from sensitive and resistant cells bound similar amounts of proflavine at saturation, whether or not they were osmotically protected by 10% sucrose. Intact cells bound approximately the same amounts of proflavine as spheroplasts. On addition of glucose, osmotically protected resistant but not sensitive spheroplasts released proflavine; unprotected spheroplasts did not release bound proflavine. Thus, osmotically protected membranes are not required for proflavine binding (a passive process) but are required for proflavine release (an active process). The presence of sucrose reduced proflavine binding by resistant cells. Adding glucose to cells in 20% sucrose did not cause a release of residual proflavine, though glucose caused a release of proflavine from cells suspended in 0 or 10% sucrose. On treatment of heated cells or ruptured spheroplasts with nucleases and Pronase, practically all nucleic acids were removed. Proflavine-binding ability of such preparations fell by only 30 to 50%. Washing heated cells with ethanol did not reduce their proflavine-binding ability. There appear to be important binding sites in cells aside from nucleic acids.
Proflavine inhibited the aerobic and anaerobic utilization of glucose by sensitive but not by resistant Escherichia coli. In resistant cells that had bound proflavine, glucose utilization was accompanied by release of the dye. After glucose was used up, the cells could again take up proflavine. If the amount of proflavine bound to sensitive cells was too low to inhibit glucose utilization, adding glucose to these cells caused them to release the dye. With higher proflavine concentrations, inhibitory to glucose utilization, the dye remained cell bound. Thus, metabolic energy causes the release of proflavine by both sensitive and resistant cells. In the former, energy production is inhibited by proflavine, and thus the dye prevents its own release. Chloramphenicol did not interfere with metabolically induced release of proflavine from resistant cells. Cyanide inhibited the glycerol-induced loss of proflavine, but not the glucose-induced loss. Azide and carbonyl cyanide m-chlorophenylhydrazone could prevent proflavine release without inhibiting glucose utilization.
We evaluated the ability of proflavin to induce specific-locus mutations at the heterozygous thymidine kinase (tk) locus of L5178Y/TK +/- -3.7.2C mouse lymphoma cells, which appears to permit the recovery of mutants due to single-gene and chromosomal mutations. Proflavin was highly mutagenic at the tk locus, producing 724-965 TK mutants/10(6) survivors (background = 56-85/10(6); survival = 29-32%). Most of the mutants were small colonies, which suggested that proflavin may induce chromosomal mutations. The potent clastogenicity of proflavin was confirmed by cytogenetic analysis for chromosomal aberrations. At the highest dose analyzed (1.5 micrograms/ml), proflavin produced 82 aberrations/100 metaphaes (background = 2/100). The large-colony TK mutant frequency produced by proflavin (48-109/10(6) survivors; background = 23/10(6); survival = 57-61%) was similar to published HPRT mutant frequencies produces by proflavin in L5178Y and CHO cells (50-100/10(6) survivors; background = 2-50/10(6); survival = 50-62%). These results lead to the conclusion that proflavin is a potent clastogen and induces a high frequency of small-colony TK mutants; however, it induces a low frequency of HPRT mutants and a low frequency of large-colony TK mutants.
The steady-state prompt fluorescence, phosphorescence and delayed fluorescence spectra and triplet lifetimes of free proflavin and proflavin bound to native DNA and alternating poly d(A-IU) were obtained as a function of temperature in a buffer-glycerol solvent. The intensity of the proflavin E-type delayed fluorescence (DF) relative to both the phosphorescence (Ph) and the prompt fluorescence (F) was observed to increase with temperature, and plots of both ln (DF/Ph) and ln (DF/(F.tau T] as a function of 1/T were linear over a wide range of temperatures. Although the activation energies for the thermal repopulation of the proflavin excited singlet state from the triplet obtained from the slopes of these plots were essentially unchanged on binding, perturbations to the S1----T1 intersystem crossing rate constants extracted from the intercepts at infinite temperature were observed. The marked enhancement of the intersystem crossing that occurs with binding to the iodinated polynucleotide reflects an external heavy atom perturbation upon the intercalated dye which also induces a shortening in the triplet lifetime. With proflavin bound to DNA an enhancement to the S1----T1 intersystem crossing, though lesser in magnitude than for poly d(A-IU), is observed but with no change to the triplet lifetime. The well-studied fluorescence quenching of DNA-bound proflavin is a result of this increase in the intersystem crossing. It is proposed that these non-heavy atom enhancements in the intersystem crossing are due to distortions of the molecular plane of the bound proflavin molecule. In total these analyses provide a complete description of the excited state processes of the proflavin molecule and their variations with temperature.
Proflavine (3,6-diaminoacridine) has potential for use as an antiinfective in fish, and its metabolism by rainbow trout was therefore studied. Fourteen hours after intraarterial bolus administration of 10 mg/kg of proflavine, three metabolites were found in liver and bile, and one metabolite was found in plasma using reversed-phase HPLC with UV detection at 262 nm. Treatment with hydrochloric acid converted the three metabolites to proflavine, which suggested that the metabolites were proflavine conjugates. Treatment with beta-glucuronidase and saccharic acid 1,4-lactone, a specific beta-glucuronidase inhibitor, revealed that two metabolites were proflavine glucuronides. For determination of UV-VIS absorption and mass spectra, HPLC-purified metabolites were isolated from liver. Data from these experiments suggested that the proflavine metabolites were 3-N-glucuronosyl proflavine (PG), 3-N-glucuronosyl,6-N-acetyl proflavine (APG), and 3-N-acetylproflavine (AP). The identities of the metabolites were verified by chemical synthesis. When synthetic PG and AP were compared with the two metabolites isolated from trout, they had the same molecular weight as determined by matrix-assisted, laser desorption ionization, time-of-flight MS. In addition, they coeluted on HPLC under different mobile phase conditions. Finally, the in vitro incubation with liver subcellular preparations confirmed this characterization and provided the evidence that APG can be formed by glucuronidation of AP or acetylation of PG.
Rev is an essential regulatory HIV-1 protein that binds the Rev responsive element (RRE) within the env gene of the HIV-1 RNA genome, activating the switch between viral latency and active viral replication. Previously, we have shown that selective incorporation of the fluorescent probe 2-aminopurine (2-AP) into a truncated form of the RRE sequence (RRE-IIB) allowed the binding of an arginine-rich peptide derived from Rev and aminoglycosides to be characterized directly by fluorescence methods. Using these fluorescence and nuclear magnetic resonance (NMR) methods, proflavine has been identified, through a limited screen of selected small heterocyclic compounds, as a specific and high-affinity RRE-IIB binder which inhibits the interaction of the Rev peptide with RRE-IIB. Direct and competitive 2-AP fluorescence binding assays reveal that there are at least two classes of proflavine binding sites on RRE-IIB: a high-affinity site that competes with the Rev peptide for binding to RRE-IIB (K(D) approximately 0.1 +/- 0.05 microM) and a weaker binding site(s) (K(D) approximately 1.1 +/- 0.05 microM). Titrations of RRE-IIB with proflavine, monitored using (1)H NMR, demonstrate that the high-affinity proflavine binding interaction occurs with a 2:1 (proflavine:RRE-IIB) stoichiometry, and NOEs observed in the NOESY spectrum of the 2:1 proflavine.RRE-IIB complex indicate that the two proflavine molecules bind specifically and close to each other within a single binding site. NOESY data further indicate that formation of the 2:1 proflavine.RRE-IIB complex stabilizes base pairing and stacking within the internal purine-rich bulge of RRE-IIB in a manner analogous to what has been observed in the Rev peptide.RRE-IIB complex. The observation that proflavine competes with Rev for binding to RRE-IIB by binding as a dimer to a single high-affinity site opens the possibility for rational drug design based on linking and modifying it and related compounds.
Molecular models describing intermediates that may lead to proflavin-induced 1 bp deletions during in vitro polymerization by E. coli DNA polymerase I Klenow fragment are proposed. The models provide structural explanations for the fact that the induced frameshifts always occur opposite template bases that are adjacent to 5' pyrimidines and are based on the underlying hypothesis that the deletions arise because the polymerase passes by a template base without copying it. Because the most frequent mutations are opposite Pu in the template sequence 5' Py Pu 3', a single-strand loop-out model was constructed for this sequence and proflavin was added, using structures found in crystalline oligonucleotides and their complexes with proflavin. The model seeks to rationalize the roles of the 5' pyrimidine and proflavin in facilitating the bypass. Four potential roles for proflavin in mutagenesis are described: 1) stacking on the looped-out base; 2) stacking on the base pair immediately preceding the site of mutation; 3) hydrogen bonding with the 5' pyrimidine; 4) hydrogen bonding with the phosphate backbone. These models point to the possibility that a number of proflavin-DNA interactions may be involved. In contrast, modeling does not suggest a role for classically intercalated proflavin in frameshift mutagenesis arising during in vitro DNA polymerization.
Explore the source record for details and available documents.