PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “SILICA”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

Adsorption study of alkyl-silicas and methylsiloxy-silicas.

We report the synthesis and adsorption study of the lyophobic porous silicas. Four adsorbents were prepared and tested: (1) octyl-silica, (2) hexadecyl-silica, (3) bis(trimethylsiloxy)-silica, and (4) oligo(dimethylsiloxane)-silica. Octyl- and hexadecyl-silicas were prepared via the reaction of silica with (CH3)2NSi(CH3)2CnH(2n+1) (n=8 and 16), the reactions were carried under the optimized conditions yielding high bonding densities of alkyl groups approximately 2.9-3.0 groups/nm2 and highly uniform non-polar adsorbents. Bis(trimethylsiloxy)-silica was prepared via the reaction silica with ClSi(CH3)2(CH2)10Si(CH3)[OSi(CH3)3]2. Oligo(dimethylsiloxane)-silica was prepared via the reaction of silica with ClSi(CH3)2-[OSi(CH3)2]2-Cl. Adsorption of small organic compounds (n-alkanes, alkylbenzene, benzene, diethyl ether) was investigated using two methods, classical static adsorption and gas chromatography. Thermodynamic parameters (heat, Gibbs energy, and entropy) of the adsorption of organic compounds were studied as a function of the nature of adsorbate and of the nature of the bonded layer as well. The results obtained suggest penetration of the adsorbate molecules into the bonded layer and the importance of this process in the retention mechanism in gas chromatography. Energy of the dispersion interactions with the surface decreases in the following order: n-C16H33(CH3)2Si- > n-C8H17(CH3)2Si- > [(CH3)3SiO]2Si(CH3)-(CH2)10(CH3)2Si- > -[[(CH3)2SiO]2]x-(CH3)2Si-. Energy of the electrostatic and hydrogen bonding interactions with the surface, as assessed from the adsorption of benzene and diethyl ether molecules, decreases in the opposite direction, indicating that alkyl-silicas are less polar adsorbents than methylsiloxy-silicas.

Adsorption↗

Characteristics of Alkyltrimethoxysilane-Treated Fumed Silicas and Rheological Behavior of Fumed Silica Suspensions in an Epoxy Resin.

Fumed silica was surface treated by hexyl (C6), octyl (C8), decyl (C10), hexadecyl (C16), and octadecyl(C18)trimethoxysilanes, and the products were evaluated from various aspects. The amounts of alkyl group introduced on silica surface were all within the range from 22 to 25 mmol/100 g. Such fumed silicas were suspended in an epoxy resin, bisphenol type A, and their rheological properties were measured. The rheological behavior of the silica suspensions was investigated as to steady-state viscosity and dynamic moduli in order to examine the effect of alkyl chain length on interactions of hydrophobic groups on the silica surface. The stronger shear thinning behavior was observed in the surface-modified fumed silica with longer alkyl groups. However, the suspensions of the nontreated fumed silica and the fumed silicas treated by C6 silane showed Newtonian behavior even at the silica concentration of 7 wt%. The dynamic moduli G' of the silica suspensions increased with increasing alkyl chain length. The interaction of hydrophobic groups on the silica surface is mainly attributed to the rheological behavior of fumed silica suspensions in the epoxy resin. Copyright 2001 Academic Press.

Journal Article↗

Dental resin composites containing silica-fused whiskers--effects of whisker-to-silica ratio on fracture toughness and indentation properties.

Dental resin composites need to be strengthened in order to improve their performance in large stress-bearing applications such as crowns and multiple-unit restorations. Recently, silica-fused ceramic whiskers were used to reinforce dental composites, and the whisker-to-silica ratio was found to be a key microstructural parameter that determined the composite strength. The aim of this study was to further investigate the effects of whisker-to-silica ratio on the fracture toughness, elastic modulus, hardness and brittleness of the composite. Silica particles and silicon carbide whiskers were mixed at whisker:silica mass ratios of 0:1, 1:5. 1:2, 1:1, 2:1, 5:1, and 1:0. Each mixture was thermally fused, silanized and combined with a dental resin at a filler mass percentage of 60%. Fracture toughness was measured with a single-edge notched beam method. Elastic modulus and hardness were measured with a nano-indentation system. Whisker:silica ratio had significant effects on composite properties. The composite toughness (mean+/-SD; n = 9) at whisker:silica = 2:1 was (2.47+/-0.28) MPa m(1/2), significantly higher than (1.02+/-0.23) at whisker:silica = 0:1, (1.13+/-0.19) of a prosthetic composite control, and (0.95+/-0.11) of an inlay/onlay composite control (Tukey's at family confidence coefficient = 0.95). Elastic modulus increased monotonically and hardness plateaued with increasing the whisker:silica ratio. Increasing the whisker:silica ratio also decreased the composite brittleness, which became about 1/3 of that of the inlay:onlay control. Electron microscopy revealed relatively flat fracture surfaces for the controls, but much rougher ones for the whisker composites, with fracture steps and whisker pullout contributing to toughness. The whiskers appeared to be well-bonded with the matrix, probably due to the fused silica producing rough whisker surfaces. Reinforcement with silica-fused whiskers resulted in novel dental composites that possessed fracture toughness two times higher than, and brittleness less than half of current dental composites.

Carbon Compounds, Inorganic↗

Fluorescence imaging of the desorption of dye from fused silica versus silica gel.

The desorption rate constants for a cationic dye from strong adsorption sites are compared for the same chromatographic interface but for two different substrates, fused silica and chromatographic silica gel. The dye is 1,1'-didodecyl-3,3,3'3'-tetramethylindocarbocyanine perchlorate (DiI). The interface consists of acetonitrile and a hydrocarbon monolayer (C8) covalently bound to the silica substrate. To measure slow desorption from fused silica, fluorescence imaging combined with correlation spectroscopy is used. To measure slow desorption from silica gel, fluorescence movies of silica gel particles are used. In both cases, the results show that there are two types of slow desorption processes on time scales exceeding 1 s. The desorption time from one type of site is within an experimental error of 7 s for both silica substrates. The adsorption kinetics for this type of site are slow, and the equilibrium population of DiI on these sites is comparable to that for DiI weakly adsorbed to the hydrocarbon monolayer. For the second type of site, for fused silica, the population of DiI is even higher than that of weakly adsorbed DiI, and the desorption time constant is approximately 2 min, although this is likely shortened by photobleaching. For silica gel, the relative population of DiI on this ultrastrong site is more than an order of magnitude lower, and the desorption time constant is 4.0 +/- 0.1 min. Both silica substrates thus show two types of sites whose time constants agree within experimental error, suggesting that the strong adsorption sites on fused silica are chemically the same as those on chromatographic silica gel.

Journal Article↗

Solid dosage form preparations from oily medicines and their drug release. Effect Of degree of surface-modification of silica gel on the drug release from phytonadione-loaded silica gels.

A surface-modified silica gel was produced to improve the surface affinity to an oily medicine, phytonadione (VK1). The effect of the degree of surface modification of the silica gel on the drug release behavior from the silica porous matrix was investigated. The silica gels were surface-modified using the silan coupling agent, 3-methacryloxypropyltrimethoxysilane (C7), octadecyltriethoxysilane (C18), or 3,3,3-trifluoropropyltrimethoxysilane (F3). A mixture of VK1 solution and surface-modified silica gel was evaporated under reduced pressure at room temperature, then the resulting powder was dried in vacuo. The degree of surface modification was evaluated based upon elementary analysis. The dissolution profiles of the samples were investigated in Japanese Pharmacopoeia XII, 1st fluid buffer (pH 1.2, 37+/-0.5 degrees C) containing 1.5% sodium lauryl sulfate. The FT-IR spectra of VK1-loaded surface-modified silica gels suggested that the amount of hydrogen-bonded VK1 with the silanol group on the gel surface decreased with increasing hydrophobicity of the silica gel. Since the modified group was rotating on the silica gel surface, and inhibited the adsorption of VK1 to the surface, the attractive molecular interaction between VK1 and the silica gel surface might decrease with increasing length of the modified functional group. However, the characteristics of the affinity of VK1 to the functional groups significantly differed among the groups. The VK1 release from the modified silica gels was initially rapid, slowed markedly after 1 h, and continued for more than 24 h. The amount of VK1 released from the modified surface silica gels by C7, C18 or F3 increased with increasing density of the surface modification group. The mean drug release moment (MDT) decreased with an increase in surface-modified group density.

Adsorption↗

Generation of free radicals from freshly fractured silica dust. Potential role in acute silica-induced lung injury.

Data presented here indicate that freshly fractured silica exhibits surface characteristics and biologic reactivity distinct from aged silica, and on this basis we propose that these surface features may lead to enhanced manifestations of lung injury. Grinding of silica produces approximately 10(18) Si and Si-O (silicon-based) radicals per gram of dust on the particulate surface which are characterized by an electron spin resonance (ESR) spectrum centered around g = 2.0015. These silicon-based radicals react with aqueous media to produce OH radicals, which are demonstrable using a DMPO spin trap. The concentration of silicon-based radicals in silica decreases with aging in air and exhibits a half-life of approximately 30 h, whereas its ability to generate OH radicals in aqueous solution decreases with a half-life of approximately 20 h. However, on storage in aqueous media, the concentration of silicon-based radicals and the dust's ability to generate OH radicals decrease significantly within a few minutes. Freshly ground silica is also more biologically reactive than aged silica, because freshly crushed silica activates a greater respiratory burst in alveolar macrophages than aged silica, i.e., storage of ground dust in air decreases silica-induced superoxide anion secretion, hydrogen peroxide release, and NBT reduction by 25%, 68%, and 43%, respectively. Furthermore, compared to aged silica, freshly ground silica exhibits a greater cytotoxic effect on cellular membrane integrity, i.e., a 1.5-fold increase in LDH release from macrophages, a 36-fold increase in hemolytic activity, and a three-fold increase in the ability to induce lipid peroxidation.(ABSTRACT TRUNCATED AT 250 WORDS)

Acute Disease↗

Effects of whisker-to-silica ratio on the reinforcement of dental resin composites with silica-fused whiskers.

Resin composites need to be strengthened to improve their performance in large stress-bearing restorations. This study aimed to reinforce composites with whiskers and to investigate the effects of the whisker:silica ratio. It was hypothesized that changing the whisker-silica ratio would affect the whisker-matrix bonding and the filler's distribution, and hence alter the composite properties. Silica particles and whiskers were mixed at various whisker:silica mass ratios, thermally fused, and combined with a dental resin at filler mass fractions of 0-65%. Whisker:silica ratio and filler level had significant effects on composite properties. At 60% filler level, the silica composite (whisker:silica = 0:1) had a flexural strength (mean +/- SD; n = 6) of 104 +/- 21 MPa; that at a whisker:silica ratio of 1:0 was 74 +/- 36 MPa. However, that of the silica-fused whisker composite (whisker:silica = 5:1) was 210 +/- 14 MPa, compared with 109 +/- 23 MPa and 114 +/- 18 MPa of two prosthetic controls. Mixing silica with whiskers minimized whisker entanglement, improved filler distribution in the matrix, and facilitated whisker silanization and bonding to the matrix, thus resulting in substantially stronger composites.

Carbon Compounds, Inorganic↗

Spherical ordered mesoporous silicas and silica monoliths as stationary phases for liquid chromatography.

Ordered mesoporous silicas such as micelle-templated silicas (MTS) feature unique textural properties in addition to their high surface area (approximately 1000 m2/g): narrow mesopore size distributions and controlled pore connectivity. These characteristics are highly relevant to chromatographic applications for resistance to mass transfer, which has never been studied in chromatography because of the absence of model materials such as MTS. Their synthesis is based on unique self-assembly processes between surfactants and silica. In order to take advantage of the perfectly adjustable texture of MTS in chromatographic applications, their particle morphology has to be tailored at the micrometer scale. We developed a synthesis strategy to control the particle morphology of MTS using the concept of pseudomorphic transformation. Pseudomorphism was recognized in the mineral world to gain a mineral that presents a morphology not related to its crystallographic symmetry group. Pseudomorphic transformations have been applied to amorphous spherical silica particles usually used in chromatography as stationary phases to produce MTS with the same morphology, using alkaline solution to dissolve progressively and locally silica and reprecipitate it around surfactant micelles into ordered MTS structures. Spherical beads of MTS with hexagonal and cubic symmetries have been synthesized and successfully used in HPLC in fast separation processes. MTS with a highly connected structure (cubic symmetry), uniform pores with a diameter larger than 6 nm in the form of particles of 5 microm could compete with monolithic silica columns. Monolithic columns are receiving strong interest and represent a milestone in the area of fast separation. Their synthesis is a sol-gel process based on phase separation between silica and water, which is assisted by the presence of polymers. The control of the synthesis of monolithic silica has been systematically explored. Because of unresolved yet cladding problems to evaluate the resulting macromonoliths in HPLC, micromonoliths were synthesized into fused-silica capillaries and evaluated by nano-LC and CEC. Only CEC allows to gain high column efficiencies in fast separation processes. Capillary silica monolithic columns represent attractive alternatives for miniaturization processes (lab-on-a chip) using CEC.

Journal Article↗

Fungus-mediated biotransformation of amorphous silica in rice husk to nanocrystalline silica.

Rice husk is a cheap agro-based waste material, which harbors a substantial amount of silica in the form of amorphous hydrated silica grains. However, there have been no attempts at harnessing the enormous amount of amorphous silica present in rice husk and its room-temperature biotransformation into crystalline silica nanoparticles. In this study, we address this issue and describe how naturally deposited amorphous biosilica in rice husk can be bioleached and simultaneously biotransformed into high value crystalline silica nanoparticles. We show here that the fungus Fusarium oxysporum rapidly biotransforms the naturally occurring amorphous plant biosilica into crystalline silica and leach out silica extracellularly at room temperature in the form of 2-6 nm quasi-spherical, highly crystalline silica nanoparticles capped by stabilizing proteins; that the nanoparticles are released into solution is an advantage of this process with significant application and commercial potential. Calcination of the silica nanoparticles leads to loss of occluded protein and to an apparently porous structure often of cubic morphology. The room-temperature synthesis of oxide nanomaterials using microorganisms starting from potential cheap agro-industrial waste materials is an exciting possibility and could lead to an energy-conserving and economically viable green approach toward the large-scale synthesis of oxide nanomaterials.

Biotransformation↗

Surface photochemistry: benzophenone as a probe for the study of silica and reversed-phase silica surfaces.

This work reports the use of benzophenone, a very well characterized probe, to study new hosts: two reversed-phase silicas. Laser-induced room temperature luminescence of argon purged solid powdered samples of benzophenone adsorbed onto the two different reversed-phase silicas, RP-18 and RP-8, revealed the existence of a low energy emission band in contrast with the benzophenone adsorbed on 60 A pore silica, where only triplet benzophenone emits. This low energy emission band was identified as the fluorescence of the ketyl radical of benzophenone, which is formed as the result of a hydrogen atom abstraction reaction of the triplet excited benzophenone from the alkyl groups of the surface of the reversed silicas. Such emission does not exist for benzophenone adsorbed onto 60 A pore silica. Room temperature phosphorescence was obtained in argon purged samples for all the surfaces under use. The decay times of the benzophenone emission vary greatly with the alkylation of the silica surface when compared with "normal" silica surface. A lifetime distributions analysis has shown that the shortest lifetimes for the benzophenone emission exist in the former case. Triplet-triplet absorption of benzophenone was detected in all cases and is the predominant absorption in the case of 60 A pore silica, while benzophenone ketyl radical formation occurs in the case of the reversed silicas. Diffuse reflectance laser flash photolysis and gas chromatography-mass spectrometry techniques provided complementary information, the former about transient species and the latter regarding the final products formed after laser irradiation, both at 266 nm or 355 nm. Product analysis and identification show that the degradation photoproducts are dependent on the excitation wavelength, the photochemistry being much more rich and complex in the 266 nm excitation case, where an alpha-cleavage reaction occurs. A detailed mechanistic analysis is proposed.

Journal Article↗

Response of alveolar macrophages to in vitro exposure to freshly fractured versus aged silica dust: the ability of Prosil 28, an organosilane material, to coat silica and reduce its biological reactivity.

We have reported previously that crushing or grinding crystalline silica results in the generation of silica-based radicals on the particulate surface and that these radicals can generate hydroxyl radicals in aqueous solution. Data in the present study indicate that freshly ground silica is more cytotoxic and is a more potent activator of alveolar macrophages than comparably sized aged silica. That is, compared to aged silica, fresh silica is 4.2-fold more potent in decreasing the membrane integrity of macrophages; is 50% more potent in activating hydrogen peroxide secretion by macrophages; and is 4.6-fold more potent in stimulating cellular chemiluminescence. Prosil 28, an organosilane material, is an effective coating agent for fresh silica. It decreases the cytotoxicity of fresh silica by as much as 78% and decreases the ability of fresh silica to induce chemiluminescence from alveolar macrophages by 58%. The data suggest that surface radicals associated with freshly cleaved dust may be an important factor in the induction of pulmonary disease. Furthermore, treating dust with coating agents may substantially decrease toxicity.

Animals↗

Synthesis of vinyl polymer-silica colloidal nanocomposites prepared using commercial alcoholic silica sols.

The surfactant-free synthesis of vinyl polymer-silica nanocomposite particles has been achieved in aqueous alcoholic media at ambient temperature in the absence of auxiliary comonomers. Styrene, methyl methacrylate, methyl acrylate, n-butyl acrylate, and 2-hydroxypropyl methacrylate were homopolymerized in turn in the presence of three commercially available ultrafine alcoholic silica sols. Stable colloidal dispersions with reasonably narrow size distributions were obtained, with silica contents of up to 58% by mass indicated by thermogravimetric analysis. Particle size distributions were assessed using both dynamic light scattering and disk centrifuge photosedimentometry. The former technique indicated that the particle size increased for the first 1-2 h at 25 degrees C and thereafter remained constant. Particle morphologies were studied using electron microscopy. Most of the colloidal nanocomposites comprised approximately spherical particles with relatively narrow size distributions, but in some cases more polydisperse or nonspherical particles were obtained. Selected acrylate-based nanocomposites were examined in terms of their film formation behavior. Scanning electron microscopy studies indicated relatively smooth films were obtained on drying at 20 degrees C, with complete loss of the original particle morphology. The optical clarity of solution-cast 10 microm nanocomposite films was assessed using visible absorption spectrophotometry, with 93-98% transmission being obtained from 400 to 800 nm; the effect of long-term immersion of such films in aqueous solutions was also examined. X-ray photoelectron spectroscopy studies indicated that the surface compositions of these nanocomposite particles are invariably silica-rich, which is consistent with their long-term colloidal stability and also with aqueous electrophoresis measurements. FT-IR studies suggested that in the case of the poly(methyl methacrylate)-silica nanocomposite particles, the carbonyl ester groups in the polymer are hydrogen-bonded to the surface silanol groups. According to differential scanning calorimetry studies, the glass transition temperatures of several poly(methyl methacrylate)-silica and polystyrene-silica nanocomposites can be either higher or lower than those of the corresponding homopolymers, depending on the nature of the silica sol.

Journal Article↗

Activation of murine macrophages by silica particles in vitro is a process independent of silica-induced cell death.

We have tested the murine macrophagic cell line RAW 264.7 for its ability to undergo activation after exposure to silica particles in vitro. When exposed to silica under controlled conditions (each cell having access to about 10 silica particles), RAW 264.7 cells were able to phagocytose the particles. Concomitantly, there was a significant increase in tumor necrosis factor alpha (TNF alpha) mRNA accumulation and TNF alpha secretion. The level of TNF alpha production by RAW 264.7 cells increased up to 5-fold 48 h after phagocytosis of silica particles with very low cell toxicity. The phagocytic stimulus did not induce nitric oxide production. When cells were exposed to a higher number of silica particles, cell activation was attained at shorter times but a substantial number of cells were damaged at 48 h. Interferon gamma (IFN gamma) alone induced an increased production of TNF alpha in RAW 264.7 cells, not further augmented by a subsequent exposure to silica of the IFN gamma-treated cells. Other macrophage-like cell lines as well as primary peritoneal macrophages were able to phagocytose silica particles but showed different abilities to produce and secrete TNF alpha once phagocytosis took place. Therefore, RAW 264.7 cells were chosen as a model for in vitro studies of the long-term response of macrophages to silica.

Animals↗

Capillary electrochromatography with monolithic silica column: I. Preparation of silica monoliths having surface-bound octadecyl moieties and their chromatographic characterization and applications to the separation of neutral and charged species.

Monolithic silica columns with surface-bound octadecyl (C18) moieties have been prepared by a sol-gel process in 100 microm ID fused-silica capillaries for reversed-phase capillary electrochromatography of neutral and charged species. The reaction conditions for the preparation of the C18-silica monoliths were optimized for maximum surface coverage with octadecyl moieties in order to maximize retention and selectivity toward neutral and charged solutes with a sufficiently strong electroosmotic flow (> 2 mm/s) to yield rapid analysis time. Furthermore, the effect of the pore-tailoring process on the silica monoliths was performed over a wide range of treatment time with 0.010 M ammonium hydroxide solution in order to determine the optimum time and conditions that yield mesopores of narrow pore size distribution that result in high separation efficiency. Under optimum column fabrication conditions and optimum mobile phase composition and flow velocity, the average separation efficiency reached 160 000 plates/m, a value comparable to that obtained on columns packed with 3 microm C18-silica particles with the advantages of high permeability and virtually no bubble formation. The optimized monolithic C18-silica columns were evaluated for their retention properties toward neutral and charged analytes over a wide range of mobile phase compositions. A series of dimensionless retention parameters were evaluated and correlated to solute polarity and electromigration property. A dimensionless mobility modulus was introduced to describe charged solute migration and interaction behavior with the monolithic C18-silica in a counterflow regime during capillary electrochromatography (CEC )separations. The mobility moduli correlated well with the solute hydrophobic character and its charge-to-mass ratio.

Alkanes↗

Effect of amorphous silica and silica sand on removal of chromium(VI) by zero-valent iron.

The effect of two surfaces (amorphous silica and silica sand) on the reduction of chromium(VI) by zero-valent iron (Fe(0)) was investigated using batch reactors. The amendment of both surfaces significantly increased the rate and extent of Cr(VI) removal. The rate enhancement by amended surfaces is presumed to result from scavenging of Fe(0)-Cr(VI) reaction products by the provided surfaces, which minimized surface deactivation of Fe(0). The rate enhancing effect was greater for silica compared to sand, and the difference is attributed to silica's higher surface area, greater affinity for reaction products and pH buffering effect. For a given mass of Fe(0), the reactivity and longevity of Fe(0) to treat Cr(VI) increased with increasing dose of silica. Elemental analyses of the reacted iron and silica revealed that chromium removed from the solution was associated with both surfaces, with its mass distribution being approximately 1:1 per mass of iron and silica. The overall result suggests reductive precipitation was a predominant Cr(VI) removal pathway, which involves initial reduction of Cr(VI) to Cr(III), followed by formation of Cr(III)/Fe(III) hydroxides precipitates.

Adsorption↗

Chitosan-silica complex membranes from sulfonic acid functionalized silica nanoparticles for pervaporation dehydration of ethanol-water solutions.

Nanosized silica particles with sulfonic acid groups (ST-GPE-S) were utilized as a cross-linker for chitosan to form a chitosan-silica complex membranes, which were applied to pervaporation dehydration of ethanol-water solutions. ST-GPE-S was obtained from reacting nanoscale silica particles with glycidyl phenyl ether, and subsequent sulfonation onto the attached phenyl groups. The chemical structure of the functionalized silica was characterized with FTIR, (1)H NMR, and energy-dispersive X-ray. Homogeneous dispersion of the silica particles in chitosan was observed with electronic microscopies, and the membranes obtained were considered as nanocomposites. The silica nanoparticles in the membranes served as spacers for polymer chains to provide extra space for water permeation, so as to bring high permeation rates to the complex membranes. With addition of 5 parts per hundred of functionalized silica into chitosan, the resulting membrane exhibited a separation factor of 919 and permeation flux of 410 g/(m(2) h) in pervaporation dehydration of 90 wt % ethanol aqueous solution at 70 degrees C.

Chitosan↗

Silicon-silica nanowires, nanotubes, and biaxial nanowires: inside, outside, and side-by-side growth of silicon versus silica on zeolite.

It was demonstrated that zeolite can be used as a pseudo-template to grow very fine and uniform silicon nanostructures via disproportionation reaction of SiO by thermal evaporation. Three distinct types of composite nanowires and nanotubes of silicon and silica were grown on the surfaces of zeolite Y pellets. The first type is formed by an ultrafine crystalline silicon nanowire sheathed by an amorphous silica tube (a silicon nanowire inside a silica nanotube). The second type is formed by a crystalline silicon nanotube filled with amorphous silica (a silicon nanotube outside a silica nanowire). The third type is a biaxial silicon-silica nanowire structure with side-by-side growth of crystalline silicon and amorphous silica. These silicon nanostructures exhibit unusually intense photoluminescence (in comparison to ordinary silicon nanowires).

Journal Article↗

Triconstituent co-assembly to ordered mesostructured polymer-silica and carbon-silica nanocomposites and large-pore mesoporous carbons with high surface areas.

Highly ordered mesoporous polymer-silica and carbon-silica nanocomposites with interpenetrating networks have been successfully synthesized by the evaporation-induced triconstituent co-assembly method, wherein soluble resol polymer is used as an organic precursor, prehydrolyzed TEOS is used as an inorganic precursor, and triblock copolymer F127 is used as a template. It is proposed for the first time that ordered mesoporous nanocomposites have "reinforced concrete"-structured frameworks. By adjusting the initial mass ratios of TEOS to resol, we determined the obtained nanocomposites possess continuous composition with the ratios ranging from zero to infinity for the two constituents that are "homogeneously" dispersed inside the pore walls. The presence of silicates in nanocomposites dramatically inhibits framework shrinkage during the calcination, resulting in highly ordered large-pore mesoporous carbon-silica nanocomposites. Combustion in air or etching in HF solution can remove carbon or silica from the carbon-silica nanocomposites and yield ordered mesoporous pure silica or carbon frameworks. The process generates plenty of small pores in carbon or/and silica pore walls. Ordered mesoporous carbons can then be obtained with large pore sizes of approximately 6.7 nm, pore volumes of approximately 2.0 cm(3)/g, and high surface areas of approximately 2470 m(2)/g. The pore structures and textures can be controlled by varying the sizes and polymerization degrees of two constituent precursors. Accordingly, by simply tuning the aging time of TEOS, ordered mesoporous carbons with evident bimodal pores at 2.6 and 5.8 nm can be synthesized.

Journal Article↗