PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Skeletal Muscle Myosins”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
PubMed1980

Comparison of kinetic properties of the ATPase reaction of arterial smooth muscle myosin with skeletal muscle myosin.

Myosin was prepared from arterial smooth muscle, and a hybrid actomyosin was formed from arterial myosin and rabbit skeletal muscle F-actin. We performed kinetics on the ATPase reaction [EC 3.6.1.3] of arterial myosin and the hybrid actomyosin at high ionic strength, and compared the kinetic properties of arterial myosin ATPase with those of skeletal muscle myosin ATPase. No significant difference was found between these two myosins in the size of the initial Pi burst, the amount of bound nucleotides, and the rates of various elementary steps in the ATPase reaction. On the other hand, two important differences were observed between the hybrid actomyosin and skeletal muscle actomyosin: (i) The amounts of ATP necessary for complete dissociation of the hybrid and skeletal muscle actomyosins were 2 and 1 mol/mol of myosin, respectively. (ii) The rate of dissociation of the hybrid actomyosin induced by ATP was much lower than that of skeletal muscle actomyosin and also was lower than that of fluorescence enhancement.

Actins↗
PubMed1979

Studies on Ca2+-Mg2+ binding sites of frog skeletal muscle myosin.

From skeletal muscle myosin light chains readily dissociate from the myosin oligomer in the absence of divalent cations, and unlike rabbit skeletal muscle myosin light chains, the released light chains of frog skeletal muscle myosin have a high Ca2+ binding affinity. Whereas each Ca2+ binding light chain of frog skeletal muscle myosin, when in association with the heavy chains bound 1 mol of Ca2+, when in the dissociated state bound 0.5 mol of Ca2+; the latter were readily displaced with low Mg2+ concentrations. Whereas 10(-5) M Mg2+ displaced all of the Ca2+ binding sites on the released light chains at Ca2+ concentration ranges of 10(-7) to 10(-4) M, there was negligible displacement of the Ca2+ binding sites with native frog skeletal muscle myosin under these same conditions.

Animals↗
PubMed1995

Thermally induced unfolding of Acanthamoeba myosin II and skeletal muscle myosin: nucleotide effects.

The thermal unfolding of monomeric Acanthamoeba myosin II and rabbit skeletal muscle myosin at pH 7.5 in 0.6 M KCl has been studied by differential scanning calorimetry (DSC) and circular dichroism. A single endotherm (at approximately 40 to 45 degrees C) with a maximum at 41.7 +/- 0.1 degrees C and delta H approximately 1080 +/- kcal/mol is observed for both dephospho- and phospho-myosin II. Skeletal muscle myosin unfolds with less cooperativity over a wider temperature range (approximately 40 to 60 degrees C) with delta H approximately 2500 kcal/mol. The thermal unfolding of either myosin results in a loss of approximately 70% of alpha-helical structures. Saturation of dephospho- or phospho-myosin II with 5'-adenylylimidodiphosphate (AMPPNP) in the presence of Mg2+ produces a second endotherm with a maximum at approximately 49 degrees C. The latter observation is attributed to a stabilization of head regions by nucleotide binding. Indeed, a purified N-terminal myosin II head fragment has been found to unfold with Tmax approximately 41 and approximately 48 degrees C in the absence and presence of AMPPNP, respectively. The stabilization of the head regions is less with ADP+Pi and still smaller with ADP alone. In summary, thermally induced unfolding of myosin II is affected by nucleotide binding to heads, but not by phosphorylation or even removal of a 66-amino-acid tailpiece containing phosphorylation sites. The observed differences in the cooperativity of unfolding myosin II and skeletal muscle myosin relate to differences between rod structures and possibly also head-rod interactions.

Acanthamoeba↗
PubMed1996

Thermal unfolding of Acanthamoeba myosin II and skeletal muscle myosin.

Studies on the thermal unfolding of monomeric Acanthamoeba myosin II and other myosins, in particular skeletal muscle myosin, using differential scanning calorimetry (DSC) are reviewed. The unfolding transitions for intact myosin or its head fragment are irreversible, whereas those of the rod part and its fragments are completely reversible. Acanthamoeba myosin II unfolds with a high degree of cooperativity from ca. 40-45 degrees C at pH 7.5 in 0.6 M KCl, producing a single, sharp endotherm in DSC. In contrast, thermal transitions of rabbit skeletal muscle myosin occur over a broader temperature range (ca. 40-60 degrees C) under the same conditions. The DSC studies on the unfolding of the myosin rod and its fragments allow identification of cooperative domains, each of which unfolds according to a two-state mechanism. Also, DSC data show the effect of the nucleotide-induced conformational changes in the myosin head on the protein stability.

Acanthamoeba↗
PubMed1986

Cardiac and skeletal muscle myosin polymorphism.

Skeletal muscles, unlike cardiac tissue, express several myosin isozymes during development which differ in primary structure from adult myosin. Monoclonal antibodies have shown the presence of at least two embryonic myosins, followed by a post-hatch myosin that persists until the appearance of adult myosin in chicken pectoralis muscle. Although the two major cardiac isozymes differ in enzymatic activity, the avian skeletal myosin isozymes all share the same high level of ATPase activity found for adult pectoralis myosin. The functional basis for the extensive myosin polymorphism in skeletal muscles thus remains to be determined.

Adenosine Triphosphatases↗
PubMed2005

Two independent mechanical events in the interaction cycle of skeletal muscle myosin with actin.

During skeletal muscle contraction, regular arrays of actin and myosin filaments slide past each other driven by the cyclic ATP-dependent interaction of the motor protein myosin II (the cross-bridge) with actin. The rate of the cross-bridge cycle and its load-dependence, defining shortening velocity and energy consumption at the molecular level, vary widely among different isoforms of myosin II. However, the underlying mechanisms remain poorly understood. We have addressed this question by applying a single-molecule approach to rapidly ( approximately 300 mus) and precisely ( approximately 0.1 nm) detect acto-myosin interactions of two myosin isoforms having large differences in shortening velocity. We show that skeletal myosin propels actin filaments, performing its conformational change (working stroke) in two steps. The first step ( approximately 3.4-5.2 nm) occurs immediately after myosin binding and is followed by a smaller step ( approximately 1.0-1.3 nm), which occurs much faster in the fast myosin isoform than in the slow one, independently of ATP concentration. On the other hand, the rate of the second phase of the working stroke, from development of the latter step to dissociation of the acto-myosin complex, is very similar in the two isoforms and depends linearly on ATP concentration. The finding of a second mechanical event in the working stroke of skeletal muscle myosin provides the molecular basis for a simple model of actomyosin interaction. This model can account for the variation, in different fiber types, of the rate of the cross-bridge cycle and provides a common scheme for the chemo-mechanical transduction within the myosin family.

Actins↗
PubMed1991

Formation and properties of smooth muscle myosin 20-kDa light chain-skeletal muscle myosin hybrids and photocrosslinking from the maleimidylbenzophenone-labeled light chain to the heavy chain.

Experimental conditions which permit the exchange of smooth muscle 20-kDa light chain into skeletal muscle myosin are described. The hybridization does not result in the regulation of actin-activated ATPase activity of the hybrid myosin by smooth light chain phosphorylation. Further, the KCl dependence of the Mg-ATPase activity of the hybrid was similar to that of skeletal muscle myosin. The dephosphorylation of the smooth light chain in the hybrid did not induce a conformational change in the hybrid from the 6 S to the 10 S state, thereby indicating that the conformational transition is dependent also on the nature of the heavy chain subunit. Exchange of the smooth light chain premodified at its Cys-108 by photolabile 4-(N-maleimido)benzophenone and photolysis resulted in crosslinking to the heavy chain subunit. Immunopeptide mapping using a monoclonal antibody against residues 1-23 at the N-terminus of the skeletal muscle myosin heavy chain identified the location of the photocrosslinking site to be beyond 92 kDa away from the N-terminus.

Actins↗
PubMed1996

Myosin isoforms and their light chains from the ventricular muscle of the urodelan amphibian Pleurodeles waltlii: comparison with myosin from skeletal muscles.

Myosin extracted from ventricular muscle of the urodelan amphibian Pleurodeles waltlii was analyzed in comparison with myosin extracted from skeletal muscles by native, one-dimensional SDS gel electrophoresis and two-dimensional gel electrophoresis. Two myosin isoforms were detected in ventricular muscle using pyrophosphate gel electrophoresis. These isomyosins contained two types of light chain subunits, LC1v and LC2v. Two-dimensional gel electrophoresis showed that LC1v comigrated with the slow light chain LC1s, whereas LC2v was characterized by a specific mobility, distinct from LC2s and LC2f. Diaphragm muscle was characterized by the coexistence of larval and adult myosin isoforms.

Age Factors↗
PubMed2002

The biochemical kinetics underlying actin movement generated by one and many skeletal muscle myosin molecules.

To better understand how skeletal muscle myosin molecules move actin filaments, we determine the motion-generating biochemistry of a single myosin molecule and study how it scales with the motion-generating biochemistry of an ensemble of myosin molecules. First, by measuring the effects of various ligands (ATP, ADP, and P(i)) on event lifetimes, tau(on), in a laser trap, we determine the biochemical kinetics underlying the stepwise movement of an actin filament generated by a single myosin molecule. Next, by measuring the effects of these same ligands on actin velocities, V, in an in vitro motility assay, we determine the biochemistry underlying the continuous movement of an actin filament generated by an ensemble of myosin molecules. The observed effects of P(i) on single molecule mechanochemistry indicate that motion generation by a single myosin molecule is closely associated with actin-induced P(i) dissociation. We obtain additional evidence for this relationship by measuring changes in single molecule mechanochemistry caused by a smooth muscle HMM mutation that results in a reduced P(i)-release rate. In contrast, we observe that motion generation by an ensemble of myosin molecules is limited by ATP-induced actin dissociation (i.e., V varies as 1/tau(on)) at low [ATP], but deviates from this relationship at high [ATP]. The single-molecule data uniquely provide a direct measure of the fundamental mechanochemistry of the actomyosin ATPase reaction under a minimal load and serve as a clear basis for a model of ensemble motility in which actin-attached myosin molecules impose a load.

Actomyosin↗
PubMed1976

A comparative study of reactive--SH groups of cardiac and skeletal muscle myosins.

Cardiac and skeletal muscle myosins have been treated by N-ethylmaleimide in presence or absence of Mg-ADP. The variations of Ca2+ and K+-ATPase activities and the incorporation of N-[14C]ethylmaleimide into the whole myosin molecule and into its separated subunits (heavy and light chains) have been measured with N-ethylmaleimide treatment for different lengths of time. The results reported here show the following: 1. The Ca2+-ATPase activity of cardiac myosin is activated by N-ethylmaleimide treatment to a lesser extent than that of skeletal myosin. 2. The K+-ATPase activity of both myosins is inhibited in the same quantitative way. 3. The cardiac light chain L1 contains one highly reactive thiol group which is absent from the skeletal light chains. 4. The labelling of three SH-groups localized in the heavy subunits of both myosins induced the same degree of inactivation. 5. The difference observed between the degree of inhibition of the Ca2+-ATPase activity for the two types of myosin with longer treatments appears to be due to differences in the reactivity of the fourth--SH group labelled on the heavy chains.

Adenosine Triphosphatases↗
PubMed2003

Skeletal muscle myosin is the autoantigen for experimental autoimmune myositis.

Experimental autoimmune myositis (EAM) is a rodent model for human inflammatory muscle disease (IMD). It can be induced by immunization of rodents with skeletal muscle homogenate and adjuvant. The specific myositogenic autoantigen has not been clearly identified although some evidence points to skeletal muscle myosin. In this report we strengthen this evidence, showing that Lewis rats immunized with purified skeletal muscle myosin develop EAM with the same pattern and severity as EAM induced by whole rabbit skeletal muscle homogenate (WRM). Multiple inflammatory lesions are detected histopathologically in the biceps, quadriceps, and gastrocnemius muscles. Myosin-reactive T cells from animals immunized either with myosin or with WRM have similar patterns of antigen-induced proliferation. The results show that myosin, a component of skeletal muscle, is at least one autoantigen in EAM.

Animals↗
PubMedDate not supplied

[Correlation between Ca2+-dependent movement of crosslinks in myosin filaments and Ca2+-sensitive actin-activated ATPase of skeletal muscle myosin].

The dependence of actin-activated ATPase activity and myosin filament structure have been studied on Ca(2+)-concentration in the range between pCa 7.5 and pCa 4.6. Rabbit skeletal muscle myosin with dephosphorylated regulatory light chains column-purified with DEAE-Sephadex A-50 for the removal of minor proteins and actin without regulatory proteins have been used. Considerable increase in actomyosin ATPase activity (by 70%) is revealed with increasing Ca(2+)-level from pCa 7.5 up to pCa 4.6. Electron microscopic observations on the structures of reconstituted myosin filaments have revealed Ca(2+)-dependent movement of myosin cross-bridges (head + subfragment-2) from and to the backbone of myosin filaments. The correlation between the manifestation of Ca(2+)-sensitivity of ATPase properties of myosins and Ca(2+)-dependent mobility of cross-bridges has been established. In particular, the increase in the mobility of cross-bridges and their moving away from the surface of myosin filaments at pCa 4.6 correlates with the increase in actin-activated ATPase of the same myosin preparations. It is supposed that the interrelation between the above properties observed in in vitro system can be of importance for force generation and its regulation in muscle.

Actins↗
PubMed1997

Skeletal muscle myosin subfragment 1 dimers.

The rate of translational diffusion of skeletal muscle myosin subfragment 1 (S1) was determined from polarized dynamic light scattering autocorrelation measurements. Diffusion rates were expressed in terms of the hydrodynamic radii Rh. At 20 degrees C, in low ionic strength pH 8 solutions, Rh increased from 4.3 nm to 5.7 nm as [S1] was increased from 1.6 to 72 microM. Including MgATP to maintain S1. MgADP. Pi gave equivalent results. When the light scattering data were analyzed, assuming a monomer-dimer equilibrium, a dissociation constant of 83 microM was obtained. Steady state MgATPase activity measurements were made as a function of [ATP] for S1 in the 0.4-7 microM range, and analyzed assuming Michaelis-Menten kinetics. VMAX did not change, but KM increased about tenfold as [S1] was increased over this range. The light scattering and kinetic data were consistent with S1 aggregation at high [S1].

Adenosine Triphosphate↗
PubMed2005

Slip sliding away: load-dependence of velocity generated by skeletal muscle myosin molecules in the laser trap.

Skeletal muscle's ability to shorten and lengthen against a load is a fundamental property, presumably reflecting the inherent load-dependence of the myosin molecular motor. Here we report the velocity of a single actin filament translocated by a mini-ensemble of skeletal myosin approximately 8 heads under constant loads up to 15 pN in a laser trap assay. Actin filament velocity decreased with increasing load hyberbolically, with unloaded velocity and stall force differing by a factor of 2 with [ATP] (30 vs. 100 muM). Analysis of actin filament movement revealed that forward motion was punctuated with rapid backward 60-nm slips, with the slip frequency increasing with resistive load. At stall force, myosin-generated forward movement was balanced by backward slips, whereas at loads greater than stall, myosin could no longer sustain forward motion, resulting in negative velocities as in eccentric contractions of whole muscle. Thus, the force-velocity relationship of muscle reflects both the inherent load-dependence of the actomyosin interaction and the balance between forward and reverse motion observed at the molecular level.

Actin Cytoskeleton↗
PubMed1998

A unique loop contributing to the structure of the ATP-binding cleft of skeletal muscle myosin communicates with the actin-binding site.

Actin binding to skeletal muscle myosin subfragment-1 (S1) increases the dissociation rate of reaction products from the myosin ATPase site; conversely, ATP binding facilitates dissociation of complexed acto-S1. However, details of the molecular mechanism by which the ATP- and actin-binding sites communicate with each other is still obscure. We present evidence that the effect of actin is mediated by a conformational change in the loop containing amino acids from 677 to 689 [loop M (677-689)], a segment of the 20-kDa tryptic fragment that contributes to the structure of the ATP-binding cleft. Initially, a fluorescent ADP analogue, methylanthranyloyl-8-azido-ADP (Mant-8-N3-ADP), was covalently crosslinked to loop M (Mant-S1), perhaps at Lys 681. Actin-activated Mg2+-ATP hydrolysis by Mant-S1 was accelerated approximately 6 times over that by unmodified S1, suggesting that the ATPase site is not blocked by the ADP analogue crosslinked in the loop M (677-689). Nevertheless, analysis of Mant-group fluorescence polarization and acrylamide-induced quenching showed the crosslinked probe to be entrapped within the ATP-binding cleft at a location where Mant-group rotational mobility was hindered, and where it was relatively inaccessible to the solvent. Exposing Mant-S1 to Mg2+-ATP and/or actin elicited similar decreases in fluorescence polarization, indicating increased rotational mobility of the Mant-group and movement of crosslinked Mant-8-N3-ADP to a less hindered position. Stern-Volmer quench curves showed that Mant-8-N3-ADP was translocated to a site where it was more accessible to dissolved quencher, perhaps outside the ATP-binding cleft. Since actin does not bind to the ATPase site, actin-induced translocation of Mant-8-N3-ADP crosslinked to loop M (677-689) probably results from a conformational change in loop M (677-689). These results suggest that loop M acts as a signal transducer mediating communication between the ATP- and actin-binding sites.

Actins↗
PubMed1986

Phosphorylation of synthetic peptides by skeletal muscle myosin light chain kinases.

Substrate determinants for rabbit and chicken skeletal muscle myosin light chain kinases were examined with synthetic peptides. Both skeletal muscle myosin light chain kinases had similar phosphorylation kinetics with synthetic peptide substrates. Average kinetic constants for skeletal muscle myosin light chain heptadecapeptide, (formula; see text) where S(P) is phosphoserine, were Km, 2.3 microM and Vmax, 0.9 mumol/min/mg of enzyme. Km values were 122 and 162 microM for skeletal muscle peptides containing A-A for basic residues at positions 2-3 and 6-7, respectively. Average kinetic constants for smooth muscle myosin light chain peptide, (formula; see text), were Km, 1.4 microM and Vmax 27 mumol/min/mg of enzyme. Average Km values for the smooth muscle peptide, residues 11-23, were 10 microM which increased 6- and 11-fold with substitutions of alanine at residues 12 and 13, respectively. Vmax values decreased and Km values increased markedly by substitution of residue 16 with glutamate in the 11-23 smooth muscle tridecapeptide. Basic residues located 3 and 6-7 residues toward the NH2 terminus from phosphoserine in smooth muscle myosin light chain and 6-8 and 10-11 residues toward the NH2 terminus from phosphoserine in skeletal muscle myosin light chain appear to be important substrate determinants for skeletal muscle myosin light chain kinases. These properties are different from myosin light chain kinase from smooth muscle.

Alanine↗
PubMed2007

Fast skeletal muscle myosin heavy chain gene cluster of medaka Oryzias latipes enrolled in temperature adaptation.

To disclose mechanisms involved in temperature acclimation of fish muscle, we subjected eurythermal fish of medaka Oryzias latipes to cloning of myosin heavy chain genes (MYHs). We cloned cDNAs encoding fast skeletal muscle myosin heavy chain (MYH) isoforms from cDNA libraries of medaka acclimated to 10 and 30 degrees C and observed that different MYH cDNA clones are expressed in the two temperature-acclimated fish. Subsequently, we isolated several overlapping MYH contigs by shotgun cloning strategy from a medaka genomic library. Contig assembly of the complete medaka MYH (mMYH) locus of 219 kbp revealed a cluster of tandemly arrayed 11 mMYHs, in which eight genes are actually transcribed, with the remaining three being pseudogenes. Expression analysis of the transcribed genes revealed that two genes were each highly expressed in medaka acclimated to 10 and 30 degrees C, whereas comparatively lower expression levels of the three genes were exclusively observed in medaka acclimated to 30 degrees C. cDNAs of the remaining genes were too underrepresented in the libraries to determine the expression levels, and the transcripts could only be obtained by reverse transcription-polymerase chain reaction. Deduced amino acid sequences in the loop 1 and loop 2 regions of mMYHs were highly variable, suggesting that these isoforms were functionally different. The present findings consolidate our knowledge on teleost MYH multigene family and would provide further insight into the mechanisms by which expressions of individual MYH molecules are fine-tuned with environmental temperature fluctuations with further functional analysis of the genes concerned.

Adaptation, Physiological↗