SEARCH · PubMed Health

Results for “Source apportionment”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

7 recordsLinked to original sources

PubMed2026

Three-dimensional source apportionment and quantitative characterization of horizontal and vertical transport fluxes of O3 and its precursors in the Beijing-Tianjin-Hebei region, China.

Persistent surface ozone (O3) pollution in the Beijing-Tianjin-Hebei (BTH) region is driven by coupled precursor emissions and multi-scale transport, yet its altitude-dependent transport and source contributions remain insufficiently quantified. Here we integrated the Weather Research and Forecasting and the Comprehensive Air Quality Model with Extensions with the Ozone Source Apportionment Technology and a quantitative transport-flux framework to characterize three-dimensional source apportionment and horizontal/vertical fluxes of O3, Volatile Organic Compounds‌ (VOCs), and Nitrogen Oxides (NOx) across dynamic meteorological scenarios. Simulations showed that VOCs and NOx were dominated by local emissions near the surface (73.61 %-82.18 %), whereas surface O3 was primarily controlled by regional transport, with local contributions of only 11.01 %-13.75 %. Notably, the transport dominance further strengthened with altitude, exceeding 93 % at 1.8 km. Industrial and transportation emissions together contributed more than 75 % of precursor emissions and account for approximately 80 % of O3 formation, while favorable/unfavorable meteorological years modulated long-range transport efficiency and the vertical distribution of contributions. Horizontal flux analysis highlighted three major pathways (Northwest-Southeast, Southeast-Northwest, and Southwest-Northeast), with Shijiazhuang serving as a critical pollutant "sink" across altitude layers. Vertical fluxes revealed an altitude transition near 600 m: net downward transport dominated below 600 m, whereas enhanced summer convection promoted upward transport above 600 m. These results support altitude-dependent, scenario-specific strategies for coordinated regional O3 mitigation in the BTH region.

Ozone↗

PubMed2026

Comprehensive source-risk assessment of organophosphate esters in surface water of the Dianchi Lake Basin, Yunnan, China.

Organophosphate esters (OPEs), widely used as flame retardants and plasticizers, have been increasingly detected in aquatic environments. However, investigations of their distribution in high-altitude plateau lakes remain scarce. Identifying and quantifying the sources and associated risks of OPEs are crucial for subsequent water environment management. In this study, an integrated source-risk analysis approach was employed by combining the Positive Matrix Factorization (PMF) model, the Geodetector (GD) model, and risk quotient (RQ). Analysis of 14 OPEs in surface waters of the Dianchi Lake Basin (DLB) revealed 12 detectable compounds, with total OPEs concentrations (ΣOPEs) ranging from not detected (ND)-64.6 ng/L during the wet season and ND-35.8 ng/L during the dry season. Elevated ΣOPEs were primarily observed at inflow sites in the northern part of the lake and in urban rivers. Source apportionment indicated four major contributing sources: agricultural films containing flame-retardant and plasticizer additives, traffic-related particulate emissions, releases from household and personal care products, and industrial production and applications of flame retardants in plastics, electronics, and related products (the predominant source). The ecological impact caused by OPEs ranges from no risk to low risk, with tris(2-chloroethyl) phosphate emitted from industrial source being the primary driver of potential environmental risk. These findings highlight the necessity of prioritizing industrial sources in future management strategies. Overall, this study provides a methodological framework for source apportionment and risk assessment of OPEs and offers scientific evidence to support environmental management of OPEs in the DLB.

Environmental Monitoring↗

PubMed2026

Biomass burning contributions to Mexico City's atmospheric CO2 estimated using a multi-isotope approach.

Fossil fuel combustion dominates anthropogenic emissions worldwide; however, special attention should be addressed to biomass burning, since it is an increasingly important contributor under warmer, drier fire-weather conditions exacerbated by climate change. These emissions could impact the atmospheric composition of heavily urbanized environments. To assess the influence of biomass burning, along with fossil fuels combustion and soil and plant respiration on Mexico City's atmospheric composition, we conducted a year-long (December 2023-December 2024) isotopic monitoring of atmospheric CO2, combining radiocarbon (Δ14C), CO2 stable isotopes (δ13C, δ18O), and CO/CO2 ratios. Once defined the isotopic signatures and the characteristic CO/CO2 that describe the sources, we performed Monte Carlo simulations under two tracer modalities (Δ14C + CO/CO2 and Δ14C + CO2 stable isotopes) for source apportionment. Results show that during the dry season, particularly in March-April, atmospheric Δ14C values approached and overlapped background levels despite Mexico City's fossil-fuel dominance, indicating enhanced non-fossil inputs. Moreover, backward HYSPLIT trajectories supported that these elevated Δ14C values coincided with regional wildfire activity. Monte Carlo results attributed up to ∼34 %-60 % of local CO2 to biomass burning in April, followed by March with contributions of ∼31 %-49 %. Since these biomass burning figures contrast with the official emissions inventory of Mexico City metropolitan area, which assigns <1 % of total CO2 emissions to biomass burning, this study could exhibit the emissions inventory underestimation of this source, and thus, the need to reassess and incorporate top-down isotopic constraints in fire-affected urban regions.

Mexico↗

PubMed2026

Meta-analysis of source identification and apportionment in soil: A systematic review of analytical procedures, receptor modeling, and environmental applications.

Soil pollution poses significant risks to ecosystems and human health, necessitating accurate source identification and apportionment to guide mitigation strategies. This systematic review evaluates the application of Positive Matrix Factorization (PMF) and other receptor models in soil pollution studies, focusing on analytical procedures, tracer indicators, and environmental applications. This review aims to provide a comprehensive framework for conducting soil source apportionment studies, aiding policymakers in designing effective, region-specific environmental management strategies by compiling global trends and methodological insights. The study addresses sampling protocols, emphasizing representativeness and quality control. Data from 500 peer-reviewed publications highlight the dominance of research in China, Eastern Europe, and South Asia, with agricultural soils being the most frequently studied. Key findings reveal that traffic emissions (20.8 %) and industrial activities (19.4 %) are the primary global contributors to soil contamination, with regional variations such as coal combustion in cold climates and agricultural inputs in developing regions. Policy recommendations include stricter industrial regulations, sustainable agricultural practices, and targeted remediation efforts based on source-specific risks.

Soil Pollutants↗

PubMed2025

Coupling of spectroscopy and nitrogen-oxygen isotopes unveils the mechanisms of dissolved organic matter and nitrate pollution in lakes within the agro-pastoral transition zone.

Lakes in arid and semi-arid regions are subjected to severe ecological stress, such as organic pollution, eutrophication, and salinization, due to climate change and human activities. This study investigates Chagannur Lake, a typical arid-region lake that is representative and ecologically sensitive in Northern China's agro-pastoral ecotone, to uncover its pollution characteristics and mechanisms. We employed fluorescence spectroscopy and stable isotope analysis to trace dissolved organic matter (DOM) and nitrate sources. The DOM composition was dominated by microbial metabolic byproducts and protein-like substances, suggesting that microbial processes are key to organic matter transformation. Source apportionment revealed that pollutants primarily originated from livestock and poultry manure (37.6 %), agricultural fertilizers (35.6 %), and soil erosion (24.7 %), with agricultural fertilizers contributing most significantly in the Gogstai River (63.3 %). A structural equation model (SEM) coupling spectral and mass spectrometric data revealed that microbial transformation significantly impairs the lake's self-purification capacity, thereby promoting pollutant accumulation (path coefficient = 0.91,*p < 0.05). Moreover, microbial processes link endogenous and exogenous pollution, a mechanism effectively traced by isotopic and fluorescence indices (path coefficient = 0.55, ⁎⁎p < 0.01). These findings enhance the understanding of pollution sources and transformation mechanisms in arid-region lakes and offer foundational theoretical support for policymakers engaged in pollution control strategies.

Lakes↗

PubMed2025

An integrated multiscale air quality modelling framework for industrial park pollution: Linking local emissions to regional transport.

Capturing the spatiotemporal distribution of pollutants in industrial parks remains challenging for regional air quality models because of their coarse resolution (3 km), resulting in uncertainties in local emission quantification. To address this, we developed the Integrated Multiscale Air Quality Modelling System for Industry (IAQMS-Industry), coupling the regional Nested Air Quality Prediction Modelling System (NAQPMS) with a city-scale chemical transport model. This framework integrates point-source locations and Gaussian plume dispersion to simulate particulate matter with a diameter smaller than 2.5 micrometres (PM2.5) at 100 m resolution. Applied to the Beijing Yi Zhuang and Tangshan industrial parks and evaluated against observations. The coupled model achieved a normalized mean bias (NMB) ranging from 3.1 % to 6.2 %, improving upon NAQPMS (-16.9 % to -7.7 %). Spatial analysis revealed that coarse regional grids underestimated the PM2.5 concentrations at industrial sites by smoothing gradients, whereas IAQMS-Industry successfully resolved spatial patterns. Industrial point emissions accounted for 22.9 %-26.4 % of PM2.5 in the coupled model, which was significantly greater than the regional model estimates of 1.6 %-13.7 %. These findings indicate that regional models overestimate pollutant dispersion processes in industrial parks while underestimating local industrial impacts. By explicitly resolving point-source dynamics and linking them to regional transport, IAQMS-Industry provides a robust tool for designing targeted emission controls in industrial cities and balancing local air quality improvements with minimized regional pollution outflow. This study underscores the necessity of multiscale modelling for accurate source apportionment and informed environmental governance in industrial zones.

Air Pollution↗

PubMed2026

Pollution characteristics and health risks of PAHs and OPAHs in PM2.5 of an inland basin city in China under the influence of the clean air action plan.

Since the implementation of China's Clean Air Action, remarkable progress has been made in air pollution control, with continuous air quality improvement in Xi'an, a typical inland basin city in the Fenwei Plain. To clarify winter organic aerosol pollution variations and pinpoint targeted control needs under policy regulation, this study investigated PM2.5-bound polycyclic aromatic hydrocarbons (PAHs) and oxygenated derivatives (OPAHs) in winter Xi'an, focusing on pollution levels, chemical compositions, source contributions, meteorological impacts, regional transport and health risks. Historical comparison showed generally lower wintertime PAH concentrations in Xi'an during the period of China's clean-air actions. PMF results indicated mixed source influences on PAHs and OPAHs, with biomass-burning-related mixed combustion showing the largest contribution. During haze episodes, absolute concentrations of both PAHs and OPAHs increased; the increase was statistically significant for OPAHs but not for parent PAHs, while 4-5 ring PAHs and BcdPQ dominated the PAH and OPAH profiles, respectively. Meteorological variability, particularly synoptic pressure patterns, was strongly associated with pollutant concentrations, and regional pollution was dominated by in-basin accumulation combined with short-range transport from northern Shaanxi industrial zones. Haze periods exhibited higher toxic-equivalent concentrations, with OPAHs, particularly BcdPQ, dominating the toxicity-equivalent burden. Screening-level ILCR estimates generally remained below 10⁻4 but increased during haze episodes, especially for adult and elderly groups. In conclusion, China's clean air actions have coincided with lower wintertime PAH pollution, but stronger control of residential biomass and other solid-fuel combustion, traffic emissions, and OPAH formation remains necessary in the Fenwei Plain.

China↗