PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “WASTES”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

Waste management in Guangdong cities: the waste management literacy and waste reduction preferences of domestic waste generators.

A questionnaire survey was conducted in 2002 on 1365 households in two prefectural-level cities in the Pearl River Delta, Jiangmen and Zhongshan. Three groups of issues are covered in this paper: 1) waste management literacy, concerns, and public participation; 2) waste recycling practices and the potential for waste avoidance; and 3) public environmental literacy. This study confirms findings from previous surveys and provides new information on important issues such as imposing monetary charges on waste and environmental activities, littering, source separation programs (SSPs), and public participation and expectations in local waste management. Saving up recyclable materials for redemption in waste depots is commonly practiced in mainland China regardless of the level of development of a city, although at the household level, high-income families tend to place less value on the revenues to be gained from redemption than lower income groups do. Data from the previous and the present studies indicate that such voluntary but largely economically driven waste recovery behavior diverts at least 10% of the household waste from the waste stream. Although uncompensated SSP is less appealing in the two cities than compensated SSP, it was found that when the median per capita income of a city reaches RMB2000 per month, a high participation rate for uncompensated waste recovery is more likely to occur. Education and income levels are the chief factors affecting littering behavior and the potential for waste avoidance. Contrary to general belief, the local Chinese community is active in microwaste management. The concern, however, is over the inability of the grassroots bureaucracy to deal with rising expectations for waste collection services and neighborhood cleanliness.

Adolescent↗

Hazardous waste management system standards for owners and operators of hazardous waste treatment, storage, and disposal facilities and EPA administered permit programs; hazardous waste permit program. Environmental Protection Agency. Interim final amendments to rule.

On May 19, 1980, EPA promulgated regulations applicable to owners and operators of hazardous waste treatment, storage, and disposal facilities which prohibited the landfill disposal of most containerized liquid waste or waste containing free liquid on and after November 19, 1981. Further on June 29, 1981, EPA amended its hazardous waste management regulations so as to extend the compliance date of the restriction on the landfill disposal of containerized liquid ignitable wastes to coincide with the compliance data of the general restriction on landfill disposal of liquids. The Agency is today extending the compliance date on both these requirements until May 26, 1982, and, in a separate action, is proposing amendments to these restrictions. This extension of compliance dates is provided for the sole purpose of allowing time to complete the rulemaking action on today's proposed amendments. The Agency is also today exempting from the requirements of the hazardous waste management regulations, the acts of adding absorbent material to hazardous waste in containers and adding hazardous waste to absorbent material in a container, at the time waste is first placed in the container, in order to reduce the free liquids in a container.

Refuse Disposal↗

[Medical waste. 1. Microbiologic studies of wastes of various specialties at a large and small hospital in comparison to housekeeping waste].

Hospital wastes, similar to household refuse, from normal and high risk areas of a big and a smaller hospital were tested quantitatively and qualitatively for nosocomial infective agents. The results were compared with those of household refuse. 20-25 samples from care and operating wards were examined each for 3 months. The whole content of a waste bag was suspended without a preceding sorting. After this treatment the eluat was microbiologically examined. The results of the test proved that the germ concentration of the hospital waste was less or similar than that of household refuse. The median for gram negative rods in household refuse was e.g. 4 log10-steps higher than in wastes from operating wards. The statistical analysis confirmed these highly significant differences between the wastes from the high risk operating areas of the big and smaller hospital and the household refuse for all investigated bacteria groups. There are nearly no differences between the wastes from normal wards and from household refuse regarding germ concentration for different groups, e.g. gram negative rods or D-streptococci, and no higher germ concentration in any case. In conclusion hospital wastes must be disposed with special hygienic measures inside the hospital, outside the hospital they can be disposed together with household refuse.

Bacteria↗

Medical waste disposal. Medical Waste Committee (WT-3). Technical Council Air & Waste Management Association.

Medical (biomedical) wastes pose numerous potential health and safety hazards. In addition to their infectious and toxic characteristics, the highly variable and inconsistent nature of medical waste streams has increased public concern about storage, treatment, transportation, and ultimate disposal. In recent years, techniques have been developed to reduce human exposure to the toxic and infectious components of medical wastes. The most commonly used techniques include internal segregation, containment, and incineration. Other common techniques include grinding, shredding, and disinfection, e.g., autoclaving and chemical treatment followed by landfilling. Of all the available technologies for medical waste treatment and disposal, incineration has been found to be the most effective method overall for destroying infectious and toxic material, volume reduction, and weight reduction in the medical waste stream. Incineration destroys the broadest variety of medical waste constituents and can recover energy from the medical waste stream. Incineration also is an appropriate alternative to burial of human pathological remains.

Humans↗

Effect of aeration rate and waste load on evolution of volatile fatty acids and waste stabilization during thermophilic aerobic digestion of a model high strength agricultural waste.

Thermophilic aerobic digestion (TAD) is a relatively new, dynamic and versatile low technology for the economic processing of high strength waste slurries. Waste so treated may be safely disposed of or reused. In this work a model high strength agricultural waste, potato peel, was subjected to TAD to study the effects of oxygen supply at 0.1, 0.25, 0.5 and 1.0 vvm (volume air per volume slurry per minute) under batch conditions at 55 degrees C for 156 h on the process. Process pH was controlled at 7.0 or left unregulated. Effects of waste load, as soluble chemical oxygen demand (COD), on TAD were studied at 4.0, 8.0, 12.0 and 16.0 gl(-1) (soluble COD) at pH 7.0, 0.5 vvm and 55 degrees C. Efficiency of treatment, as degradation of total solids, total suspended solids and soluble solid, as well as soluble COD significantly increased with aeration rate, while acetate production increased as the aeration rate decreased or waste load increased, signifying deterioration in treatment. Negligible acetate, and no other acids were produced at 1.0 vvm. Production of propionate and other acids increased after acetate concentration had started to decrease and, during unregulated reactions coincided with the drop in the pH of the slurry. Acetate production was more closely associated with periods of oxygen limitation than were other acids. Reduction in oxygen availability led to deterioration in treatment efficiency as did increase in waste load. These variables may be manipulated to control treated waste quality.

Aerobiosis↗

Single-stage anaerobic codigestion for mixture wastes of simulated Korean food waste and waste activated sludge.

Korean food waste was treated with a single-stage anaerobic codigester (SSAD) using waste activated sludge (WAS) generated from a municipal wastewater treatment plant. The stability and performance of the system was analyzed. The C/N ratio was improved with increasing food waste fraction of feed mixture. The pH, alkalinity, and free ammonia nitrogen concentration were the parameters used to evaluate the digester's stability. The experimentally determined values of the parameters indicated that there were no methane inhibitions in the digester. Digester performance was determined by measuring the total chemical oxygen demand TCOD), volate solids (VS) removal, methane content in biogas, methane production rate (MPR), and specific methane productivity. Methane content in biogas and MPR were significantly dependent on hydraulic retention time (HRT) and ratio of food waste to WAS. The methane content in biogas decreased at shorter HRT or higher organic loading rate (OLR) with increased food waste fraction. Concerning the performance of the codigester, the optimum operating condition of the SSAD was found to be at an HRT of 10 d with a feed mixture ratio of 50% food waste and 50% WAS. A TCOD removal efficiency of 53.6% and a VS removal efficiency of 53.7% were obtained at an OLR of 5.96 kg of TCOD/(m3 d) and 3.14 kg of VS/(m3 d), respectively. A maximum MPR of 1.15 m3 CH4/(m3 d) and an SMP of 0.37 m3 CH4/kg of VSfeed were obtained at an HRT of 10 d with a methane content of 63%.

Anaerobiosis↗

Hazardous waste management system: standards applicable to generators of hazardous waste and standards applicable to owners and operators of hazardous waste treatment, storage, and disposal facilities--Environmental Protection Agency. Proposed rule.

The Environmental Protection Agency (EPA) is today proposing amendments to its hazardous waste regulations under Subtitle C of the Resource Conservation and Recovery Act (RCRA). These amendments would replace the annual reporting requirements for hazardous waste generators and owners and operators of hazardous waste treatment, storage, ad disposal (TSD) facilities with a biennial survey of representative samples of those populations. This approach will provide verifiable data on a wider range of topics, better serve EPA's long term regulatory needs under RCRA, and reduce significantly the information burden on the regulated community.

Refuse Disposal↗

Solid waste removes toxic liquid waste: adsorption of chromium(VI) by iron complexed protein waste.

The leather processing industry generates huge amounts of wastes, both in solid and liquid form. Fleshing from animal hides/skins is one such waste that is high in protein content. In this study, raw fleshing has been complexed with iron and is used for removal of chromium(VI). The effect of pH and the initial concentration of chromium(VI) on the removal of Cr(IV) by iron treated fleshing is presented. Iron treatment is shown to greatly improve adsorption of the fleshing for hexavalent chromium. The ultimate adsorption capacity of iron treated fleshing is 51 mg of chromium(VI) per gram of fleshing. That of untreated fleshing is 9 mg/g such that iron treatment increases the adsorption capacity of fleshing by 10-fold. The measured adsorption kinetics is well described by a pseudo-second-order kinetic model. The uptake of chromium(VI) by fleshing is best described by the Langmuir adsorption isotherm model. X-ray photoelectron spectroscopic (XPS) studies show that the iron is incorporated into the protein matrix. Shifts in XPS spectra suggest that dichromate binding occurs with iron at active adsorption sites and that iron treated fleshing removes chromium(VI) without reducing it to chromium(III).

Adsorption↗

Quality control of waste to incineration--waste composition analysis in Lidköping, Sweden.

In order to decrease environmental impacts in waste management the choice of treatment method must be based on the characteristics of the waste. Present sampling procedures do not provide statistically representative samples of solid waste and this provides difficulties in characterization. The objective of this study was to develop a procedure for waste component analysis and sampling of waste after collection and at plant level. A further objective was to characterize the waste delivered to an incineration plant for physical and chemical properties and to determine the amounts of delivered waste that could be classified as biofuels and fossil fuels. The proportions of recyclables and hazardous waste were also examined. Samples were taken randomly from waste trucks and divided by square implementation. Statistical analysis of the results showed that the number of sub-samples could be decreased with only a moderate increase in the confidence interval. This means that future waste composition analyses could be made more efficient and thereby less expensive. The analysis of the waste delivered to the Lidköping incineration plant (Central Sweden) showed that 66.4% of the household waste was composed of biofuels and 21.3% of non-renewable combustibles, of which 40.3% were recyclables. In addition, 11.6% of the household waste was non-combustible and 0.6% hazardous waste. The heat value for the biofuels was 18.0-19.7 MJ kg(-1) dry mass (DM) and for the fossil fuels 28.2-33.9 MJ kg(-1) DM. The industrial waste consisted of 35.9% biofuels, 62.0% fossil fuels, 1.6% non-combustible and 0.5% hazardous waste. The heat value was 19.5 MJ kg(-1) DM for the biofuels and 31.4 MJ kg(-1) DM for the fossil fuels.

Bioelectric Energy Sources↗

Municipal solid waste composition determination supporting the integrated solid waste management system in the island of Crete.

A one-year survey was conducted in the greater region of Crete (located at the lower region of the Aegean Sea) for the purpose of identifying waste composition (including chemical and physical characterization), as well as any seasonal variation. The investigation was carried out repeatedly at seven landfills and one transfer station in Crete, in four phases. Each sampling phase corresponded to a season (autumn, winter, spring, summer). ASTM D5231-92(2003) standard method and RCRA Waste Sampling Draft Technical Guidance were used. Hand sorting was used for classifying the collected wastes into the following categories: plastics, paper, metals, aluminium, leather-wood-textiles-rubbers, organic wastes, non-combustibles and miscellaneous. Further analysis included proximate and ultimate analysis of combustible materials. Metals such as lead, cadmium and mercury were also investigated. The results show that there has been a significant decrease of organic wastes during the last decade due to the increase of packaging materials, as a result of a change in consumption patterns. Three main waste categories were determined: organic wastes, paper and plastics, which combined represent 76% of the total waste in Crete. Furthermore, a high fraction of glass and a seasonal variation of aluminium indicate a strong correlation of waste composition with certain human activities, such as tourism. There is also a variation between the municipal solid waste (MSW) composition in the region of Crete (2003-2004) and MSW composition suggested in the National Solid Waste Planning (2000) [National Solid Waste Planning, 2000. Completion and particularization of Common Ministerial Act 113944//1944/1997: National Solid Waste Planning, June 2000]. The results of this survey are to be utilized by the regional solid waste authorities in order to establish an integrated waste treatment site, capable of fulfilling the regional waste management demands.

Environmental Monitoring↗

Hazardous waste, impact on health and environment for development of better waste management strategies in future in India.

Industry has become an essential part of modern society, and waste production is an inevitable outcome of the developmental activities. A material becomes waste when it is discarded without expecting to be compensated for its inherent value. These wastes may pose a potential hazard to the human health or the environment (soil, air, water) when improperly treated, stored, transported or disposed off or managed. Currently in India even though hazardous wastes, emanations and effluents are regulated, solid wastes often are disposed off indiscriminately posing health and environmental risk. In view of this, management of hazardous wastes including their disposal in environment friendly and economically viable way is very important and therefore suggestions are made for developing better strategies. Out of the various categories of the wastes, solid waste contributes a major share towards environmental degradation. The present paper outlines the nature of the wastes, waste generating industries, waste characterization, health and environmental implications of wastes management practices, steps towards planning, design and development of models for effective hazardous waste management, treatment, approaches and regulations for disposal of hazardous waste. Appraisal of the whole situation with reference to Indian scenario is attempted so that a better cost-effective strategies for waste management be evolved in future.

Cost-Benefit Analysis↗

Integrated waste management--looking beyond the solid waste horizon.

Waste as a management issue has been evident for over four millennia. Disposal of waste to the biosphere has given way to thinking about, and trying to implement, an integrated waste management approach. In 1996 the United Nations Environmental Programme (UNEP) defined 'integrated waste management' as 'a framework of reference for designing and implementing new waste management systems and for analysing and optimising existing systems'. In this paper the concept of integrated waste management as defined by UNEP is considered, along with the parameters that constitute integrated waste management. The examples used are put into four categories: (1) integration within a single medium (solid, aqueous or atmospheric wastes) by considering alternative waste management options, (2) multi-media integration (solid, aqueous, atmospheric and energy wastes) by considering waste management options that can be applied to more than one medium, (3) tools (regulatory, economic, voluntary and informational) and (4) agents (governmental bodies (local and national), businesses and the community). This evaluation allows guidelines for enhancing success: (1) as experience increases, it is possible to deal with a greater complexity; and (2) integrated waste management requires a holistic approach, which encompasses a life cycle understanding of products and services. This in turn requires different specialisms to be involved in the instigation and analysis of an integrated waste management system. Taken together these advance the path to sustainability.

Conservation of Natural Resources↗

Mutagenicity in salmonella of hazardous wastes and urine from rats fed these wastes.

15 hazardous industrial waste samples were evaluated for mutagenicity in the Salmonella plate-incorporation assay using strains TA98 and TA100 in the presence and absence of Aroclor 1254-induced rat liver S9. Dichloromethane/methanol extracts of the crude wastes were also evaluated. 7 of the crude wastes were mutagenic, but only 2 of the extracts of these 7 wastes were mutagenic; extracts of 2 additional wastes also were mutagenic. In addition, 10 of the crude wastes were administered by gavage to F-344 rats, and 24-h urine samples were collected. Of the 10 raw urines evaluated, 3 were mutagenic in strain TA98 in the presence of S9 and beta-glucuronidase. The 3 crude wastes that produced these 3 mutagenic urines were, themselves, mutagenic. Adequate volumes of 6 of the 10 raw urines were available for extraction/concentration. These 6 urines were incubated with beta-glucuronidase and eluted through Sep-Pak C18 columns; the methanol eluates of 3 of the urines were mutagenic, and these were the same 3 whose raw urines also were mutagenic. In general, the C18/methanol extraction procedure reduced the cytotoxicity and increased the mutagenic potency of the urines. To our knowledge, this is the first report of the mutagenicity of urine from rodents exposed to hazardous wastes. Based on the present results, the use of only strain TA98 in the presence of S9 might be adequate for general screening of hazardous wastes or waste extracts for genotoxicity. The urinary mutagenesis assay does not appear to be a useful adjunct to the Salmonella assay for screening hazardous wastes. The problems associated with chemically fractionating diverse types of hazardous wastes for bioassay are also discussed.

Animals↗

Household food waste to wastewater or to solid waste? That is the question.

Decision makers need sound analyses of economic and environmental impacts of options for managing household food waste. Food waste impacts public health (it rots, smells, and attracts rodents) and costs (it drives collection frequency). A life cycle inventory is used to quantify total materials, energy, costs and environmental flows for three municipal solid waste systems (collection followed by compost, waste-to-energy or landfill) and two wastewater systems (kitchen food waste disposer followed by rural on-site or municipal wastewater treatment) for food waste management. Inventory parameters are expressed per 100 kg of food waste (wet weight) to place data on a normalised basis for comparison. System boundaries include acquisition, use and decommissioning. Parameters include inputs (land, materials, water) and output emissions to air, water and land. Parameters are ranked simply from high to low. Ranking highest overall was the rural wastewater system, which has a high amount of food waste and carrier water relative to the total throughput over its design life. Waste-to-energy was second; burning food waste yields little exportable energy and is costly. Next, municipal wastewater tied with landfill. Municipal wastewater is low for land, material, energy and cost, but is highest for food waste by-product (sludge). Landfill ranks low for air emissions and cost. Compost ranks lowest; it has the lowest material and water inputs and generates the least wastewater and waterborne waste.

Animals↗

The study of bacterial flora of different types in hospital waste: evaluation of waste treatment at Aiims Hospital, New Delhi.

Bio-medical waste management rules were formulated in response to the worldwide public concern over medical waste. The practice of separation into different types of waste in health care institutes should be evaluated more scientifically. Due to a lack of data from the Indian sub-continent, this study was initiated at a tertiary care hospital. Samples were collected from different types of waste at the hospital, at different time intervals, for microbiological evaluation. The results reveal that the microbial flora isolated from infectious waste and general waste from the hospital are similar. The samples from general waste in this study reveal many types of pathogens. The bacteria present in the waste initially was low in quantity, but they replicated rapidly over time so that significant numbers were detected by 24 hours, due to environmental factors which were favorable for growth during this period. This study strongly suggests that waste should be removed from the hospital within 24 hours of its generation to prevent environmental contamination caused by any accidental spillage of waste. General waste generated in the hospital should be treated similar to infectious waste, as it can be equally hazardous.

Bacteria↗

[Proper disposal(management) of medical wastes--the appropriate management of medical waste in laboratory].

In accordance with "The Manual for Management of Infectious Waste" which is based on the "Waste Management Law", a counterplan for the appropriate management of medical waste must be carried out in every hospital. This requires establishing "a committee for the appropriate management of medical waste" and to assign a "responsible person for management of medical waste" (an administrator for managing industrial waste under special control) inside the hospital. Since the law requires hospitals to take responsibility for discharging medical waste, hospitals must adopt a prudent policy for waste management. It becomes a most critical issue for hospitals, because medical waste is the subject of spot inspection under the supervision of MHW, and also the subject of border transgression prohibition between countries(both import and export) by the Bazel Treaty (1989) that Japan ratified in 1993. In this study, we discuss medical waste management in the central laboratory based upon the counterplan for appropriate management of medical waste at our hospital.

Containment of Biohazards↗

A solid waste audit and directions for waste reduction at the University of British Columbia, Canada.

A novel design for a solid waste audit was developed and applied to the University of British Columbia, Canada, in 1998. This audit was designed to determine the characteristics of the residual solid waste generated by the campus and provide directions for waste reduction. The methodology was constructed to address complications in solid waste sampling, including spatial and temporal variation in waste, extrapolation from the study area, and study validation. Accounting for spatial effects decreased the variation in calculating total waste loads. Additionally, collecting information on user flow provided a means to decrease daily variation in solid waste and allow extrapolation over time and space. The total annual waste estimated from the experimental design was compared to documented values and was found to differ by -18%. The majority of this discrepancy was likely attributable to the unauthorised disposal of construction and demolition waste. Several options were proposed to address waste minimisation goals. These included: enhancing the current recycling program, source reduction of plastic materials, and/or diverting organic material to composting (maximum diversion: approximately 320, approximately 270, and approximately 1510 t yr(-1), respectively). The greatest diversion by weight would be accomplished through the diversion of organic material, as it was estimated to comprise 70% of the projected waste stream. The audit methodology designed is most appropriate for facilities/regions that have a separate collection system for seasonal wastes and have a means for tracking user flow.

British Columbia↗