PubMed Health⌕ Search

Biomedical subjects

Alasdair C Steven

Publications and source records attributed to Alasdair C Steven.

At least 37 records · Page 2Linked to original sources

A resolution criterion for electron tomography based on cross-validation.

Despite much progress in electron tomography, quantitative assessment of resolution has remained a problematic issue. The criteria that are used in single particle analysis, based on gauging the consistency between density maps calculated from half data sets, are not directly applicable because of the uniqueness of a tomographic volume. Here, we propose two criteria based on a cross-validation approach. One, called FSC(e/o), is based on a Fourier shell correlation comparison between tomograms calculated from the even and odd members of a tilt series. The other, called noise-compensated leave-one-out (NLOO), is based on Fourier ring correlation comparisons between an original projection and the corresponding reprojection of the tomogram calculated from all the other projections, taking into account the differing noise statistics. Plotted as a function of tilt angle, they allow assessment of the angular dependence of resolution and quality control over the series of projections. Integrated over all projections, the results give a global figure for resolution. Tests on simulated tomograms established consistency between these criteria and the FSC(ref), a correlation coefficient calculated between a known reference structure and the corresponding portion of a tomogram containing that structure. The two criteria-FSC(e/o) and NLOO-are mutually consistent when residual noise is the major resolution-limiting factor. When the size of the tilt increment becomes a significant factor, NLOO provides a more reliable criterion, as expected, although it is computationally intensive. Applicable to entire tomograms or selected structures, NLOO has also been tested on experimental tomographic data.

Capsid↗

Virus maturation: dynamics and mechanism of a stabilizing structural transition that leads to infectivity.

For many viruses, the final stage of assembly involves structural transitions that convert an innocuous precursor particle into an infectious agent. This process -- maturation -- is controlled by proteases that trigger large-scale conformational changes. In this context, protease inhibitor antiviral drugs act by blocking maturation. Recent work has succeeded in determining the folds of representative examples of the five major proteins -- major capsid protein, scaffolding protein, portal, protease and accessory protein -- that are typically involved in capsid assembly. These data provide a framework for detailed mechanistic investigations and elucidation of mutations that affect assembly in various ways. The nature of the conformational change has been elucidated: it entails rigid-body rotations and translations of the arrayed subunits that transfer the interactions between them to different molecular surfaces, accompanied by refolding and redeployment of local motifs. Moreover, it has been possible to visualize maturation at the submolecular level in movies based on time-resolved cryo-electron microscopy.

Animals↗

A novel class of herpesvirus with bivalve hosts.

Ostreid herpesvirus 1 (OsHV-1) is the only member of the Herpesviridae that has an invertebrate host and is associated with sporadic mortality in the Pacific oyster (Crassostrea gigas) and other bivalve species. Cryo-electron microscopy of purified capsids revealed the distinctive T=16 icosahedral structure characteristic of herpesviruses, although the preparations examined lacked pentons. The gross genome organization of OsHV-1 was similar to that of certain mammalian herpesviruses (including herpes simplex virus and human cytomegalovirus), consisting of two invertible unique regions (U(L), 167.8 kbp; U(S), 3.4 kbp) each flanked by inverted repeats (TR(L)/IR(L), 7.6 kbp; TR(S)/IR(S), 9.8 kbp), with an additional unique sequence (X, 1.5 kbp) between IR(L) and IR(S). Of the 124 unique genes predicted from the 207 439 bp genome sequence, 38 were members of 12 families of related genes and encoded products related to helicases, inhibitors of apoptosis, deoxyuridine triphosphatase and RING-finger proteins, in addition to membrane-associated proteins. Eight genes in three of the families appeared to be fragmented. Other genes that did not belong to the families were predicted to encode DNA polymerase, the two subunits of ribonucleotide reductase, a helicase, a primase, the ATPase subunit of terminase, a RecB-like protein, additional RING-like proteins, an ion channel and several other membrane-associated proteins. Sequence comparisons showed that OsHV-1 is at best tenuously related to the two classes of vertebrate herpesviruses (those associated with mammals, birds and reptiles, and those associated with bony fish and amphibians). OsHV-1 thus represents a third major class of the herpesviruses.

Amino Acid Sequence↗

The structure of the poliovirus 135S cell entry intermediate at 10-angstrom resolution reveals the location of an externalized polypeptide that binds to membranes.

Poliovirus provides a well-characterized system for understanding how nonenveloped viruses enter and infect cells. Upon binding its receptor, poliovirus undergoes an irreversible conformational change to the 135S cell entry intermediate. This transition involves shifts of the capsid protein beta barrels, accompanied by the externalization of VP4 and the N terminus of VP1. Both polypeptides associate with membranes and are postulated to facilitate entry by forming a translocation pore for the viral RNA. We have calculated cryo-electron microscopic reconstructions of 135S particles that permit accurate placement of the beta barrels, loops, and terminal extensions of the capsid proteins. The reconstructions and resulting models indicate that each N terminus of VP1 exits the capsid though an opening in the interface between VP1 and VP3 at the base of the canyon that surrounds the fivefold axis. Comparison with reconstructions of 135S particles in which the first 31 residues of VP1 were proteolytically removed revealed that the externalized N terminus is located near the tips of propeller-like features surrounding the threefold axes rather than at the fivefold axes, as had been proposed in previous models. These observations have forced a reexamination of current models for the role of the 135S particle in transmembrane pore formation and suggest testable alternatives.

Amino Acid Sequence↗

Visualization of the binding of Hsc70 ATPase to clathrin baskets: implications for an uncoating mechanism.

Clathrin assembly into coated pits and vesicles is promoted by accessory proteins such as auxilin and AP180, and disassembly is effected by the Hsc70 ATPase. These interactions may be mimicked in vitro by the assembly and disassembly of clathrin "baskets." The chimera C58J is a minimal construct capable of supporting both reactions; it consists of the C58 moiety of AP180, which facilitates clathrin assembly, fused with the J domain of auxilin, which recruits Hsc70 to baskets. We studied the process of disassembly by using cryo-electron microscopy to identify the initial binding site of Hsc70 on clathrin-C58J baskets at pH 6, under which conditions disassembly does not proceed further. Hsc70 interactions involve two sites: (i) its major interaction is with the sides of spars of the clathrin lattice, close to the triskelion hubs and (ii) there is another interaction at a site at the N-terminal hooks of the clathrin heavy chains, presumably via the J domain of C58J. We propose that individual triskelions may be extricated from the clathrin lattice by the concerted action of up to six Hsc70 molecules, which intercalate between clathrin leg segments, prying them apart. Three Hsc70s remain bound to the dissociated triskelion, close to its trimerization hub.

Adenosine Triphosphatases↗

Signal transduction at a protein synapse.

Contraction of the bacteriophage T4 tail in the act of host cell penetration represents a massive structural change powered by conformational free energy. A paper in this issue of Cell by compares cryo-electron microscopic reconstructions of the initial and final states and reveals that the basic underlying mechanism is concerted rigid-body movements of the constituent protein subunits, akin to the tumbling of gears in a lock.

Amino Acid Motifs↗

Subdomain organization of the Acanthamoeba myosin IC tail from cryo-electron microscopy.

Acanthamoeba myosin IC (AMIC) is a single-headed myosin comprised of one heavy chain (129 kDa) and one light chain (17 kDa). The heavy chain has head, neck (light chain-binding), and tail domains. The tail consists of four subdomains: a basic region (BR) (23 kDa) and two Gly/Pro/Ala-rich (GPA) regions, GPA1 (6 kDa) and GPA2 (15 kDa), flanking an Src homology 3 region (6 kDa). Although the AMIC head is similar in sequence, structure, and function (ATPase motor) to other myosin heads, the organization of the tail has been less clear as has its function beyond an assumed role in binding interaction partners, e.g., the BR has a membrane affinity and the GPA components bind F-actin in an ATP-independent manner. To investigate the spatial arrangement of subdomains in the tail, we have used cryo-electron microscopy and image reconstruction to compare actin filaments decorated with WT AMIC and tail-truncated mutants of various lengths. The BR forms an oval-shaped feature, approximately 40 A long, that diverges obliquely from the head, extending azimuthally around the actin filament and toward its barbed end. GPA2 and GPA1 are located together on the inner (actin-proximal) side of the tail, close enough to act in concert in binding the same or another actin filament. The outer face of the BR is strategically exposed for membrane or vesicle binding.

Acanthamoeba↗

Control of crosslinking by quaternary structure changes during bacteriophage HK97 maturation.

Radical structural changes drive the maturation of the capsid of HK97, a lambda-like, dsDNA bacteriophage of Escherichia coli. These include expansion from approximately 560 to approximately 660 A in diameter, metamorphosis from a round to an angular shape, and formation of covalent crosslinks between adjacent capsomers. Analogous transformations also occur in unrelated viruses and protein complexes. We find that expansion and crosslinking happen concurrently during maturation at low pH. Expansion causes residues on three different subunits to move up to 35 A to form 420 active sites that each catalyze the formation of a lysine-asparagine crosslink between adjacent subunits, making crosslink formation an indirect reporter of structural change. Intermediate crosslinking patterns support a previously proposed model of expansion, while hydrophobic properties aid in distinguishing discrete intermediates. A structure derived from cryo-EM images reveals the free intermediate conformation of penton arms, supporting our model for coordinated movement of hexons and pentons on the capsid lattice.

Asparagine↗

The N-terminal prion domain of Ure2p converts from an unfolded to a thermally resistant conformation upon filament formation.

According to the "amyloid backbone" model of Ure2p prionogenesis, the N-terminal domain of Ure2p polymerizes to form an amyloid filament backbone surrounded by the C-terminal domains. The latter domains retain their native glutathione-S-transferase (GST)-like fold but are sterically inactivated from their regulatory role in nitrogen catabolism. We have tested this model by differential scanning calorimetry of soluble and filamentous Ure2p and of soluble C-terminal domains, combined with electron microscopy. As predicted, the C-terminal domains respond to thermal perturbation identically in all three states, exhibiting a single endotherm at 76 degrees C. In contrast, no thermal signal was associated with the N-terminal domains: in the soluble state of Ure2p, because they are unfolded; in the filamentous state, because their robust amyloid conformation resists heating to 100 degrees C.

Calorimetry, Differential Scanning↗

A model for Ure2p prion filaments and other amyloids: the parallel superpleated beta-structure.

In its prion form, Ure2p, a regulator of nitrogen catabolism in Saccharomyces cerevisiae, polymerizes into filaments whereby its C-terminal regulatory domain is inactivated but retains its native fold. The filament has an amyloid fibril backbone formed by the Asn-rich, N-terminal, "prion" domain. The prion domain is also capable of forming fibrils when alone or when fused to other proteins. We have developed a model for the fibril that we call a parallel superpleated beta-structure. In this model, the prion domain is divided into nine seven-residue segments, each with a four-residue strand and a three-residue turn, that zig-zag in a planar serpentine arrangement. Serpentines are stacked axially, in register, generating an array of parallel beta-sheets, with a small and potentially variable left-hand twist. The interior of the filament is mostly stabilized not by packing of apolar side chains but by H-bond networks generated by the stacking of Asn side chains: charged residues are excluded. The model is consistent with current biophysical, biochemical, and structural data (notably, mass-per-unit-length measurements by scanning transmission electron microscopy that gave one subunit rise per 0.47 nm) and is readily adaptable to other amyloids, for instance the core of Sup35p filaments and glutamine expansions in huntingtin.

Amino Acid Sequence↗

Co-assembly of envoplakin and periplakin into oligomers and Ca(2+)-dependent vesicle binding: implications for cornified cell envelope formation in stratified squamous epithelia.

Plakin family members envoplakin and periplakin have been shown to be part of the cornified cell envelope in terminally differentiating stratified squamous epithelia. In the present study, purified recombinant human envoplakin and periplakin were used to investigate their properties and interactions. We found that envoplakin was insoluble at physiological conditions in vitro, and co-assembly with periplakin was required for its solubility. Envoplakin and periplakin formed soluble complexes with equimolar stoichiometry. Chemical cross-linking revealed that the major soluble form of all periplakin constructs and of envoplakin/periplakin rod domains was a dimer, although co-assembly of the full-length proteins resulted in formation of higher order oligomers. Electron microscopy of rotary-shadowed periplakin demonstrated thin flexible molecules with an average contour length of 88 nm for the rod-plus-tail fragment, and immunolabeling EM confirmed the molecule as a parallel, in-register, dimer. Both periplakin and envoplakin/periplakin oligomers were able to bind synthetic lipid vesicles whose composition mimicked the cytoplasmic side of the plasma membrane of eukaryotic cells. This binding was dependent on anionic phospholipids and Ca(2+). These findings raise the possibility that envoplakin and periplakin bind to the plasma membrane upon elevation of intracellular [Ca(2+)] in differentiating keratinocytes, where they serve as a scaffold for cornified cell envelope assembly.

Anions↗

New HEAT-like repeat motifs in proteins regulating proteasome structure and function.

We have identified repeat motifs in the large proteasome-binding proteins PA200 and Ecm29 by applying a sensitive sequence profile method. These repeat motifs, especially those of PA200, resemble HEAT/ARM repeats in length and other properties but differ from them in the occupancy of certain positions. The HEAT motif consists of two alpha-helices and two turns: molecular modeling suggests that in the PA200 and Ecm29 repeats, the alpha-helices may be slightly turned relative to their orientations in typical HEAT repeats. Both PA200 and Ecm29 are composed almost entirely of such repeats, and therefore are likely to have alpha-helical solenoid structures. These observations lead us to speculate on how PA200 and Ecm29 may associate with proteasomes.

Amino Acid Motifs↗

Molecular dynamics of protein complexes from four-dimensional cryo-electron microscopy.

Cryo-electron microscopy of single particles offers a unique opportunity to detect and quantify conformational variation of protein complexes. Different conformers may, in principle, be distinguished by classification of individual projections in which image differences arising from viewing geometry are disentangled from variability in the underlying structures by "multiple particle analysis"--MPA. If the various conformers represent dynamically related states of the same complex, MPA has the potential to visualize transition states, and eventually to yield movies of the dynamic process. Ordering the various conformers into a time series is facilitated if cryo-EM data are taken at successive times from a system that is known to be developing in time. Virus maturation represents a relatively tractable dynamic process because the changes are large and irreversible and the rate of the natural process may be conveniently slowed in vitro by adjusting the environmental conditions. We describe the strategy employed in a recent analysis of herpes simplex virus procapsid maturation (Nat. Struct. Biol. 10 (2003) 334-341), compare it with previous work on the maturation of bacteriophage HK97 procapsid, and discuss various factors that impinge on the feasibility of performing similar experimental analyses of molecular dynamics in the general case.

Bacteriophages↗

Structure and polymorphism of the UL6 portal protein of herpes simplex virus type 1.

By electron microscopy and image analysis, we find that baculovirus-expressed UL6 is polymorphic, consisting of rings of 11-, 12-, 13-, and 14-fold symmetry. The 12-mer is likely to be the oligomer incorporated into procapsids: at a resolution of 16 A, it has an axial channel, peripheral flanges, and fits snugly into a vacant vertex site. Its architecture resembles those of bacteriophage portal/connector proteins.

Capsid Proteins↗

Three-dimensional structure of herpes simplex virus from cryo-electron tomography.

Herpes simplex virus, a DNA virus of high complexity, consists of a nucleocapsid surrounded by the tegument-a protein compartment-and the envelope. The latter components, essential for infectivity, are pleiomorphic. Visualized in cryo-electron tomograms of isolated virions, the tegument was seen to form an asymmetric cap: On one side, the capsid closely approached the envelope; on the other side, they were separated by approximately 35 nanometers of tegument. The tegument substructure was particulate, with some short actin-like filaments. The envelope contained 600 to 750 glycoprotein spikes that varied in length, spacing, and in the angles at which they emerge from the membrane. Their distribution was nonrandom, suggesting functional clustering.

Animals↗