PubMed Health⌕ Search

Biomedical subjects

Arkady Ellern

Publications and source records attributed to Arkady Ellern.

At least 19 recordsLinked to original sources
PubMed2006

Facile synthesis of monomeric alumatranes.

Alumatranes, tricyclic neutral molecules featuring a transannular N --> Al bond, can act as Lewis acids that activate substrates in the axial coordination site. Treatment of tris(2-hydroxy-3,5-dimethylbenzyl)amine with AlMe(3) afforded dimeric (AlL)(2) 1 [wherein L = tris(2-oxy-3,5-dimethylbenzyl)amine]. X-ray diffraction analysis revealed bridging between AlL monomers by two Al-O bonds. Reactions of 1 with substrates containing O or N donors generated the alumatranes THF-AlL 2, PhCHO-AlL 3, H(2)NCH(2)CH(2)NH(2)-AlL 4, and [PhO-AlL](-) 5, in which the apical added ligand on the five-coordinate aluminum center causes variation in the transannular bond distance. Water coordinates with 1 at -20 degrees C to form the alumatrane H(2)O-AlL 6 that undergoes partial hydrolysis at room temperature to produce 7, which X-ray crystallography showed to be composed of four AlL fragments linked by an (H(2)O)(2)(HO)(2)Al(OH)(2)Al(OH)(2)(H(2)O)(2) framework in which the O(4)AlO(2)AlO(4) moiety is of local D(2)(h)() symmetry. According to X-ray analysis, 7 can crystallize in at least two polymorphic modifications: triclinic 7a and monoclinic 7b. The reaction of 3 with water also generated 6 and 7, depending on the reaction temperature. Dimeric 1 was found to promote the reaction of benzaldehyde with trimethylsilyl cyanide at room temperature to provide 2-trimethylsilyoxyphenylacetonitrile in 95% yield.

Journal Article↗
PubMed2006

Synthesis and photoelectron spectroscopic studies of N(CH2CH2NMe)3P=E (E = O, S, NH, CH2).

The synthesis and the crystal and molecular structure of N(CH(2)CH(2)NMe)(3)P=CH(2) is reported. The P-N(ax) distance is rather long in N(CH(2)CH(2)NMe)(3)P=CH(2). The ylide N(CH(2)CH(2)NMe)(3)P=CH(2) proved to be a stronger proton acceptor than proazaphosphatrane N(CH(2)CH(2)NMe)(3)P, since it was shown to deprotonate N(CH(2)CH(2)NMe)(3)PH(+). The extremely strong basicity of the ylide is in accordance with its low ionization energy (6.3 eV), which is the lowest in the presently investigated series N(CH(2)CH(2)NMe)(3)P=E (E: CH(2), NH, lone pair, O and S), and to the best of our knowledge it is the smallest value observed for a non-conjugated phosphorus ylide. Computations reveal the existence of two bond strech isomers, and the stabilization of the phosphorus centered cation by electron donation from the equatorial and the axial nitrogens. Similar stabilizing effects operate in the case of protonation of E. A fine balance of these different interactions determines the P-N(ax) distance, which is thus very sensitive to the level of the theory applied. According to the quantum mechanical calculations, methyl substitution at the equatorial nitrogens flattens the pyramidality of this atom, increasing its electron donor capability. As a consequence, the PN(ax) distance in the short-transannular bonded protonated systems and the radical cations is longer by about 0.5 A in the N(eq)(Me) than in the N(eq)(H) systems. Accordingly, isodesmic reaction energies show that a stabilization of about 25 and 10 kcal/mol is attributable to the formation of the transannular bond in case of N(eq)(H) and the experimentally realizable N(eq)(Me) species, respectively.

Journal Article↗
PubMed2005

Ligand effect on the kinetics of hydroperoxochromium(III)-oxochromium(V) transformation and the lifetime of chromium(V).

A macrocyclic superoxochromium complex L(2)(H(2)O)CrOO(2+)(L(2)=meso-Me(6)-[14]aneN(4)) is generated from L(2)Cr(H(2)O)(2)(2+) and O(2) with k(on)=(2.80 +/- 0.07)x 10(7) M(-1) s(-1). One-electron reduction of L(2)(H(2)O)CrOO(2+) produces a transient hydroperoxo complex that readily undergoes intramolecular conversion to L(2)Cr(v), k(1)= 1.00 +/- 0.01 s(-1) in acidic aqueous solutions, and 0.273 +/- 0.010 s(-1) at pH >7, with an apparent pK(a) of 5.9. The decay of L(2)Cr(v) in the pH range 1.3-6.2 obeys the rate law, -d[L(2)Cr(v)]/dt= (0.0080 (+/- 0.0049)+ 8.19 (+/- 0.13)[H(+)])[L(2)Cr(v)]. Both the kinetics of formation and lifetime of L(2)Cr(v) are significantly different from those for the closely related [14]aneN(4) complex. The X-ray structure of the parent Cr(iii) complex, [L(2)Cr(H(2)O)(2)](ClO(4))(3).4H(2)O, shows that the macrocyclic ligand adopts the most stable, "two up-two down" configuration around the nitrogens.

Journal Article↗
PubMed2005

Studies of C-S bond cleavage reactions of Re(V) dithiolates: synthesis, reactivity, and mechanism.

A series of rhenium(V) complexes, [(X)(ReO)(dt)(PPh(3))] and [(o-SC(6)H(4)PPh(2))(ReO)(mtp)], were prepared to explore electronic effects on the C-S cleavage reaction that occurs upon reaction with PAr(3) at ambient temperature [where X = S(C(6)H(4)-p-Z) (Z = OMe, Me, H, F, Cl), OPh, Cl, and SC(2)H(5), and dt is the chelating dithiolate ligand derived from 2-(mercaptomethyl)thiophenol, 1,2-ethanedithiol, 1,3-propanedithiol, 1,3-butanedithiol, and 2,4-pentanedithiol]. The scope and selectivity of the C-S activation were examined. The C-S bond cleavage to form metallacyclic Re(V) complexes with a ReS core occurs only for the complexes with mtp and pdt frameworks and X = SAr and SC(2)H(5). The difference in reactivity is due to the different donating abilities of ancillary and dithiolate ligands, especially their pi-donating ability, which plays a critical role in C-S activation. The kinetics of the C-S activation process was determined; nucleophilic attack of PPh(3) on the oxo group of the Re(V)O core appears to be the rate-controlling step. The reaction is accelerated by electron-poor ArS ligands, but is unaffected by the substituents on phosphines. A detailed mechanistic study is presented. The results represent a rare example of migration of alkanethiolate leading to the formation of alkylthiolato complexes.

Journal Article↗
PubMed2005

Rhenium(V) complexes with thiolato and dithiolato ligands: synthesis, structures, and monomerization reactions.

The new compound {(PhS)(2)ReO(mu-SPh)}(2), 1, was synthesized from Re(2)O(7) and PhSH and then used as the synthon for a number of hitherto unknown oxorhenium(V) compounds. Reactions between dithiols and 1 (2:1 ratio) afford {PhSReO(dt)}(2), where the dithiols, dtH(2), are 1,2-ethanedithiol (edtH(2)), 1,3-propanedithiol (pdtH(2)), 1,3-butanedithiol (pdtMeH(2)), 1,2-benzenedithiol (bdtH(2)), 2-(mercaptomethyl)thiophenol (mtpH(2)), and 2-mercaptoethyl sulfide (mesH(2)). Similar reactions carried out with a 3:1 ratio of dtH(2) to 1 afford [(ReO)(2)(dt)(3)], dt = edt, pdt. When NEt(3) was introduced prior to the 3:1 reaction between edtH(2) and 1, a compound containing an anionic complex was isolated, [PPh(4)][ReO(edt)(2)]. The new compounds were characterized analytically, spectroscopically, and crystallographically. The Re-O groups in two of the compounds, 1 and {ReO(mu-SPh)(bdt)}(2), exist in rare anti orientations; the others adopt the more familiar syn geometry, as discussed. Selected monomerization reactions of {PhSReO(dt)}(2) were also carried out: {PhSReO(dt)}(2) + 2L = 2[PhSReO(dt)L]. The rate for L = 4-phenylpyridine is given by v = {k(a)[L] + k(b)[L](2)} x [{PhSReO(dt)}(2)], as it is for the reactions of {MeReO(dt)}(2); for all of these compounds, the reaction proceeds nearly entirely by the third-order pathway. Values of k(b)/L(2) mol(-2) s(-1) at 25.0 degrees C are 5.8 x 10(2) (mtp), 2.97 x 10(3) (pdt), 4.62 x 10(5) (edt), and 3.87 x 10(5) (bdt). The rate law for the reactions of {PhSReO(dt)}(2) with L = PAr(3) is v = k(a)[L]/{1 + kappa[L]} x [{PhSReO(dt)}(2)]. For PPh(3), values at 25.0 degrees C of k(a)/L mol(-1) s(-1) (kappa/L mol(-1)) for {PhSReO(dt)}(2) are 9.64 x 10(-2) (1.87) for mtp, 3.43 x 10(-2) (0.492) for pdt, 1.91 (1.42) for edt, 1.84 x 10(-2) (0.82) for bdt, and 1.14 x 10(3) (10.6) for 1. Mechanisms are proposed that are consistent with the data obtained and with earlier work.

Journal Article↗
PubMed2005

New oxorhenium(V) compound for catalyzed oxygen atom transfer from picoline N-oxide to triarylphosphines.

The synthesis and characterization of a new oxorhenium(V) compound is reported; it is [MeReO(edt)(bpym)], 8, where edt = 1,2-ethanedithiolate and bpym = 2,2'-bipyrimidine. Compound 8 was characterized by NMR spectroscopy and single-crystal X-ray analysis. It exists as a six-coordinate Re(V) compound comparable to the previously known [MeReO(edt)(bpy)] and [MeReO(mtp)(bpy)]. Compound 8 catalyzes the oxygen-atom-transfer reaction PicO + PZ3 --> Pic + Z3PO, whereas the other two do not. The kinetics of this reaction with catalyst 8 follows the rate law -d[PicO]/dt = k[8][PicO]/(1 + c[PZ3]). With different phosphines, the rate law has the same k value, 4.17 L mol(-1) s(-1), but different c values. For tritolylphosphine, c = 67.5 L mol(-1) in benzene at 25 degrees C. A mechanism has been proposed to account for these findings. The data establish that an open coordination site on rhenium is necessary for oxygen-atom-transfer reactions.

Journal Article↗
PubMed2005

Structure and properties of high stability geminal dicationic ionic liquids.

Thirty-nine geminal dicationic ILs were synthesized and characterized in terms of their surface tensions, densities, melting points, refractive indices, viscosities, and miscibilities with a polar and nonpolar solvent. Two imidazolium or pyrrolidinium cations were joined via different length hydrocarbon linkage chains (from 3 to 12 carbons long). The various geminal dications were paired with up to four different anions. The effect of the dication type, linkage chain, alkyl substituents, and anion type on the physicochemical properties of these compounds was examined. Among the more interesting findings for this class of compounds was that their liquid and thermal stability ranges generally exceeded those of the more conventional, better known ILs. Indeed, this range was from -4 to >400 degrees C for one of the pyrrolidinium-based geminal dicationic liquids. X-ray crystallography of the smaller solid ionic compounds indicated that there may be a correlation between the configurational degrees of freedom of the ILs and their melting points/glass transition temperatures. In one case, the crystal structure showed that a dicationic moiety had three distinct conformations in an asymmetric unit cell. The solvation properties of the geminal dicationic ILs tend to be similar to those of their monocationic analogues.

Journal Article↗
PubMed2004

Synthesis and characterization of heavier dioxouranium(VI) dihalides.

The synthesis and characterization of the dioxouranium(VI) dibromide and iodide hydrates, UO(2)Br(2)x3H(2)O (1), [UO(2)Br(2)(OH(2))(2)](2) (2), and UO(2)I(2)x2H(2)Ox4Et(2)O (3), are reported. Moreover, adducts of UO(2)I(2) and UO(2)Br(2) with large, bulky OP(NMe(2))(3) and OPPh(3) ligands such as UO(2)I(2)(OP(NMe(2))(3))(2) (4), UO(2)Br(2)(OP(NMe(2))(3))(2) (5), and UO(2)I(2)(OPPh(3))(2)(6) are discussed. The structures of the following compounds were determined using single-crystal X-ray diffraction techniques: (1) monoclinic, P2(1)/c, a = 9.7376(8) A, b = 6.5471(5) A, c = 12.817(1) A, beta = 94.104(1) degrees , V = 815.0(1) A(3), Z = 4; (2) monoclinic, P2(1)/c, a = 6.0568(7) A, b = 10.5117(9) A, c = 10.362(1) A, beta = 99.62(1) degrees , V = 650.5(1) A(3), Z = 2; (4) tetragonal, P4(1)2(1)2, a = 10.6519(3) A, b = 10.6519(3) A, c = 24.0758(6) A, V = 2731.7(1) A(3), Z = 4; (5) tetragonal, P4(1)2(1)2, a = 10.4645(1) A, b = 10.4645(1) A, c = 23.7805(3) A, V = 2604.10(5) A(3), Z = 4, and (6) monoclinic, P2(1)/c, a = 9.6543(1) A, b = 18.8968(3) A, c = 10.9042(2) A, beta =115.2134(5) degrees , V = 1783.01(5) A(3), Z = 2. Whereas 1 and 2 are the first UO(2)Br(2) hydrates and the last missing members of the UO(2)X(2) hydrate (X = Cl --> I) series to be structurally characterized, 4 and 6 contain room-temperature stable U(VI)-I bonds with 4 being the first structurally characterized room temperature stable U(VI)-I compound which can be conveniently prepared on a gram scale in quantitative yield. The synthesis and characterization of 5 using an analogous halogen exchange reaction to that used for the preparation of 4 is also reported.

Journal Article↗
PubMed2004

Ligand displacement and oxidation reactions of methyl(oxo)rhenium(V) complexes.

Compounds that contain the anion [MeReO(edt)(SPh)](-) (3-) were synthesized with the countercations 2-picolinium (PicH+3-) and 2,6-lutidinium (LutH+3-), where edt is 1,2-ethanedithiolate. Both PicH+3- and MeReO(edt)(tetramethylthiourea) (4) were crystallographically characterized. The rhenium atom in each of these compounds exists in a five-coordinate distorted square pyramid. In the solid state, PicH+3- contains an anion with a short (d(SH) = 232 pm) and nearly linear hydrogen-bonded (N-H.S) interaction to the cation. Ligand substitution reactions were studied in chloroform. Displacement of PhSH by PPh(3) follows second-order kinetics, d[MeReO(edt)(PPh(3))]/dt = k[PicH+3-][PPh3], whereas with pyridines an unusual form was found, d[MeReO(edt)(Py)]/dt = k[PyH+3-][Py](2), in which the conversion of PicH+3- to PyH+3- has been incorporated. Further, added Py accelerates the formation of [MeReO(edt)(PPh3)], v = k.[PicH+3-].[PPh3].[Py]. Compound 4, on the other hand, reacts with both PPh(3) and pyridines, L, at a rate given by d[MeReO(edt)(L)]/dt = k.[4].[L]. When PicH+3- reacts with pyridine N-oxides, a three-stage reaction was observed, consistent with ligand replacement of SPh(-) by PyO, N-O bond cleavage of the PyO assisted by another PyO, and eventual decomposition of MeRe(O)(edt)(OPy) to MeReO(3). Each of first two steps showed a large substituent effect; Hammett analysis gave rho(1) = -5.3 and rho(2) = -4.3.

Journal Article↗
PubMed2004

Reaction of tin porphyrins with vicinal diols.

Reactions of tin porphyrins with vicinal diols were investigated. Treatment of (TTP)Sn(CCPh)(2) or (TTP)Sn(NHtolyl)(2) with pinacol and 2,3-diphenylbutane-2,3-diol afforded diolato complexes (TTP)Sn[OC(Me)(2)C(Me)(2)O] (1) and (TTP)Sn[OC(Ph)(Me)C(Ph)(Me)O] (2), respectively. Both complexes underwent C-C cleavage reactions to give (TTP)Sn(II) and ketones. Reaction of (TTP)Sn(CCPh)(2) with 1 equivalent of o-catechol generated (TTP)Sn(CCPh)(OC(6)H(4)OH) (3), which subsequently transformed into (TTP)Sn(OC(6)H(4)O) (4). With excess catechol, disubstituted (TTP)Sn(OC(6)H(4)OH)(2) (5) was obtained. (TTP)Sn(CCPh)(OCHRCHROH) (R = H, 6; R = Ph, 8) and (TTP)Sn(OCHRCHROH)(2) (R = H, 7; R = Ph, 9) were obtained analogously by treatment of (TTP)Sn(CCPh)(2) with appropriate diols. In the presence of dioxygen, tin porphyrin complexes were found to promote the oxidative cleavage of vicinal diols and the oxidation of alpha-ketols to alpha-diketones. Possible reaction mechanisms involving diolato or enediolato intermediates are discussed. The molecular structure of (TTP)Sn(CCPh)(OC(6)H(4)OH) (3) was determined by X-ray crystallography.

Journal Article↗
PubMed2004

CpRu(CO)2(BF4) and [CpFe(CO)2(THF)]+ on mesoporous silica as adsorbents for the removal of dibenzothiophenes from hydrocarbon solutions.

The complexes, CpRu(CO)2(BF4) and [CpFe(CO)2(eta2-2-methylpropene)][BF4], react with dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-Me2DBT) to give [CpRu(CO)2(DBT)][BF4] and [CpFe(CO)2(4,6-Me2DBT)][BF4], whose structures were established by X-ray diffraction studies. The same types of products are obtained when dibenzothiophenes react with CpRu(CO)2(BF4) and [CpFe(CO)2(THF)][BF4] that are adsorbed on the mesoporous silica SBA-15. DRIFT and XPS studies indicate that CpRu(CO)2(BF4) and [CpRu(CO)2(DBT)][BF4] are adsorbed on the SBA-15 by hydrogen-bonding of the BF4- anions to surface Si-O-H groups. CpRu(CO)2(BF4)/SBA-15 removes 99% of the DBT in a 45% toluene/55% hexanes simulated petroleum feedstock. This solid phase extractant is less successful for sterically-hindered 4,6-Me2DBT, as only 72% of it is removed. The results show that CpRu(CO)2(BF4) can be immobilized by adsorption on mesoporous silica and that it reacts with dibenzothiophenes in the adsorbed form, CpRu(CO)2(BF4)/SBA-15, in much the same way that it reacts in solution.

Journal Article↗
PubMed2003

Reduction of the allylic substituents in Ni(I)(1,8-dipropenyl-1,4,8,11-tetraazacyclotetradecane)+ by the central Ni(I) in aqueous solutions.

The complex Ni(II)(1,8,-di-2-propenyl-1,4,8,11-tetraazacyclotetradecane)(2+), (NiL(1))(2+), was synthesized. X-ray crystallography demonstrates that the complex obtained is the trans-III isomer. The allylic substituents shift the redox couples (NiL(1))(3+/2+) and (NiL(1))(2+/+) anodically relative to the corresponding couples for Ni(II)(1,4,8,11-tetraazacyclotetradecane)(2+), (NiL(2))(2+), as expected. Surprisingly, the lifetime of (NiL(1))(+) in neutral aqueous solutions is shorter than that of (NiL(2))(+). Pulse radiolysis experiments reveal that the allylic substituents are reduced by the central Ni(I) ion. The first step in this reduction is a general acid catalyzed process. The results suggest that this step involves schematically the reaction Ni(I)[bond]NCH(2)CH[double bond]CH(2)(+) + H(+) --> Ni(III)[bond]NCH2CH2CH(2)(2+). The latter transient decomposes slowly with a half-life time of several minutes. Preliminary results support the suggestion that (NiL(2))(+), or other Ni(I)L complexes of this family, might reduce many alkenes present in the solution.

Journal Article↗
PubMed2003

Synthesis and structure of UO2I2(OH2)2 x 4Et2O: first structurally characterized U(VI)-I bond and lightest missing member of the UO2X2 (X = halide) series.

UO2I2(OH2)2.4Et2O has been synthesized and structurally characterized using X-ray diffraction. This thermally unstable species is the lightest missing member of the dioxouranium dihalide (UO2X2, X = F, Cl, Br, I)-containing series to be structurally characterized and is, to our knowledge, the first structurally characterized compound containing a U(VI)-I bond.

Journal Article↗
PubMed2003

Novel twin corannulene: synthesis and crystal structure determination of a dicorannulenobarrelene dicarboxylate.

[reaction: see text] The dicorannulenobarrelene 1 was synthesized with the final step achieved by a nickel-mediated fourfold intramolecular coupling of dibromomethyl with bromomethyl groups. Low-temperature (1)H NMR spectra of 1 show a presence of three conformers with approximate populations of 0.82:0.13:0.05, in good agreement with theoretical predictions. In the crystal, 1 incorporates two CCl(4) molecules and adopts the bis-exo conformation.

Journal Article↗