PubMed Health⌕ Search

Biomedical subjects

Arkady Ellern

Publications and source records attributed to Arkady Ellern.

25 records · Page 2Linked to original sources
PubMed2003

1H NMR studies of ligand and H/D exchange reactions of cis- and trans-([14]aneN4)(H2O)RhH2+ in aqueous solutions.

Substitution and exchange reactions of cis- and trans-L(1)(H(2)O)RhH(2+) (L(1) = 1,4,8,11-tetraazacyclotetradecane = [14]aneN(4)) were studied in aqueous solutions by UV-vis and (1)H NMR spectroscopies. At pH 1 and 25 degrees C, the substitution of SCN(-) for the coordinated molecule of water is rapid and thermodynamically favorable. Spectrophotometric determinations yielded the equilibrium constants K = 1.49 x 10(3) M(-1) (cis) and 1.44 x 10(3) (trans). (1)H NMR studies in D(2)O revealed a rapid dynamic process, interpreted as the exchange between coordinated water and X(-) (X = Cl, Br, or I). On the other hand, no line broadening was observed for the strongly bound ligands CN(-) and SCN(-). The complex trans-L(1)(D(2)O)RhH(2+) undergoes a base-catalyzed H/D exchange of the hydride in D(2)O with a rate constant of (1.45 +/- 0.02) x 10(3) M(-1) s(-1). The exchange in the cis isomer is very slow under similar conditions. The complex cis-[L(1)ClRhH](ClO(4)) crystallizes in the centrosymmetric Ponemacr; space group, unit cell dimensions a = 8.9805(11) A, b = 9.1598(11) A, c = 10.4081(13) A, alpha = 81.091(2) degrees, beta = 81.978(2) degrees, gamma = 88.850(2) degrees. The rhodium atom resides in a slightly distorted octahedral environment consisting of the four N atoms of the cyclam, a stereochemically active hydrogen, and a chlorine atom.

Journal Article↗
PubMed2003

Syntheses and oxidation of methyloxorhenium(V) complexes with tridentate ligands.

Four new methyloxorhenium(V) compounds were synthesized with these tridentate chelating ligands: 2-mercaptoethyl sulfide (abbreviated HSSSH), 2-mercaptoethyl ether (HSOSH), thioldiglycolic acid (HOSOH), and 2-(salicylideneamino)benzoic acid (HONOH). Their reactions with MeReO(3) under suitable conditions led to these products: MeReO(SSS), 1, MeReO(SOS), 2, MeReO(OSO)(PAr(3)), 3, and MeReO(ONO)(PPh(3)), 4. These compounds were characterized spectroscopically and crystallographically. Compounds 1 and 2 have a five-coordinate distorted square pyramidal geometry about rhenium, whereas 3 and 4 are six-coordinate compounds with distorted octahedral structures. The kinetics of oxidation of 2 and 3 in chloroform with pyridine N-oxides follow different patterns. The oxidation of 2 shows first-order dependences on the concentrations of 2 and the ring-substituted pyridine N-oxide. The Hammett analysis of the rate constants gives a remarkably large and negative reaction constant, rho = -4.6. The rate of oxidation of 3 does not depend on the concentration or the identity of the pyridine N-oxide, but it is directly proportional to the concentration of water, both an accidental and then a deliberate cosolvent. The mechanistic differences have been interpreted as reflecting the different steric demands of five- and six-coordinate rhenium compounds.

Journal Article↗
PubMed2003

Synthetic, structural and binding studies of the 4,6-dimethyldibenzothiophene complex [(eta(5)-C(5)Me(5))Ru(CO)(2)(eta(1)(S)-4,6-Me(2)DBT)]BF(4): toward an understanding of deep hydrodesulfurization.

The synthesis of the first completely characterized transition-metal complex containing a sulfur-bound 4,6-dimethyldibenzothiophene (4,6-Me(2)DBT) ligand, [CpRu(CO)(2)(eta(1)(S)-4,6-Me(2)DBT)]BF(4) (1) (Cp = eta(5)-C(5)Me(5)), is reported. X-ray studies of 1 and its 4-methyldibenzothiophene and dibenzothiophene analogues, [CpRu(CO)(2)(eta(1)(S)-4-MeDBT)]BF(4) (2) and [CpRu(CO)(2)(eta(1)(S)-DBT)]BF(4) (3), show that the Ru-S bond distances increase in the order, 3 < 2 < 1. Equilibrium studies on the series of [CpRu(CO)(2)(eta(1)(S)-DBTh)](+) compounds, where DBTh = DBT, 4-MeDBT, 4,6-Me(2)DBT, and 2,8-Me(2)DBT, show that the relative binding strengths of the dibenzothiophene ligands increase in the order 4,6-Me(2)DBT (1) < 4-MeDBT (20.2(1)) < DBT (62.7(6)) < 2,8-Me(2)DBT (223(3)). These results are the first to quantify the steric effect of 4- and 6-methyl groups on the sulfur-coordinating ability of dibenzothiophenes to transition-metal centers. They are also consistent with the proposal that 4- and 6-methyl groups reduce the coordination of dibenzothiophenes to active metal sites on hydrodesulfurization catalysts, which could account for the slow rate of 4-MeDBT and 4,6-Me(2)DBT hydrodesulfurization in petroleum feedstocks.

Journal Article↗
PubMed2003

Synthesis and characterization of chiral tetraaza macrocyclic nickel(II) and palladium(II) complexes.

Chiral tetraaza macrocyclic nickel(II) and palladium(II) complexes 2a-e, containing one or two (R,R)-(-)-1,2-cyclohexanediyl bridges, were synthesized by template condensation reactions and characterized by (1)H and (13)C NMR, IR, UV-vis, and mass spectrometry. The electrophilic reactivity of 2a was explored. Crystal structures of Ni complex 2b and metal-free ligand 5 were determined by single-crystal X-ray diffraction.

Journal Article↗
PubMed2002

Methyloxorhenium(V) complexes with two bidentate ligands: syntheses and reactivity studies.

Four new methyloxorhenium(V) complexes were synthesized: MeReO(PA)(2) (1), MeReO(HQ)(2) (2), MeReO(MQ)(2) (3), and MeReO(diphenylphosphinobenzoate)(2) (4) (in which PAH = 2-picolinic acid, HQH = 8-hydroxyquinoline, and MQH = 8-mercaptoquinoline). Although only one geometric structure has been identified crystallographically for 1, 2, and 3, two isomers of 3 and 4 in solution were detected by NMR spectroscopy. These compounds catalyze the sulfoxidation of thioethers by pyridine N-oxides and sulfoxides. The rate law for the reaction between pyridine N-oxides and thioethers, catalyzed by 1, shows a first-order dependence on the concentrations of pyridine N-oxide and 1. The second-order rate constants of a series of para-substituted pyridine N-oxides fall in the range of 0.27-7.5 L mol(-)(1) s(-)(1). Correlation of these rate constants by the Hammett LFER method gave a large negative reaction constant, rho = -5.2. The next and rapid step does not influence the kinetics, but it could be explored with competition experiments carried out with a pair of methyl aryl sulfides, MeSC(6)H(4)-p-Y. The value of each rate was expressed relative to the reference compound that has Y = H. A Hammett analysis of k(Y)/k(H) gave rho = -1.9. Oxygen-18 labeled 1 was used in a single turnover experiment for 4-picoline N-oxide and dimethyl sulfide. No (18)O-labeled DMSO was found. We suggest that the reaction proceeds by way of two intermediates that were not observed during the reaction. The first intermediate contains an opened PA-chelate ring; this allows the pyridine N-oxide to access the primary coordination sphere of rhenium. The second intermediate is a cis-dioxorhenium(VII) species, which the thioether then attacks. Oxygen-18 experiments were used to show that the two oxygens of this intermediate are not equivalent; only the new oxygen is attacked by, and transferred to, SR(2). Water inhibits the reaction because it hydrolyzes the rhenium(VII) intermediate.

Journal Article↗
PubMed2002

Synthesis and characterization of dimetallic oxorhenium(V) and dioxorhenium(VII) compounds, and a study of stoichiometric and catalytic reactions.

Chelating dithiolate ligands--e.g., mtp from 2-(mercaptomethyl)thiophenol, edt from 1,2-ethanedithiol, and pdt from 1,3-propanedithiol--stabilize high-valent oxorhenium(V) against hydrolytic and oxidative decomposition. In addition to the dithiolate chelating to a single rhenium, one sulfur forms a coordinate bond to the other rhenium. In one arrangement this gives a dimer with a nearly planar diamond core with different internal Re-S distances. The new compounds are [MeReO(edt)](2) (2) and [MeReO(pdt)](2) (3), which can be compared to the previously known [MeReO(mtp)](2) (1). Another mode of synthesis leads to [ReO](2)(mtp)(3) (5) and [ReO](2)(edt)(3) (6). They, too, have similar Re(2)S(2) cores that involve donor atoms from two of the dithiolate ligands; the third dithiolate chelates one of the rhenium atoms. Gentle hydrolysis of 1 affords [Bu(n)4][[MeReO(mtp)](2)(mu-OH)] (7) in low yield. It appears to be the first example of this structural type for rhenium. The use of dithioerythritol as a starting material allowed the synthesis of a dioxorhenium(VII) compound, [MeReO(2)](2)(dte) (8). Its importance lies in understanding the role such compounds are believed to play as intermediates in oxygen atom catalysis. Ligation of the dimers 1-3 converts them into monomeric compounds, MeReO(dithiolate)L. These reactions go essentially to completion for L = PPh(3), but reach an equilibrium for L = NC(5)H(4)R. With R = 4-Ph, the values of K/10(3) L mol(-1) for the reactions (1-3) + 2L = 2MeReO(dithiolate)L are identical within 3 sigma: 1.15(3) (1), 1.24(4) (2), and 1.03(16) (3). The rates of monomer formation follow the rate law -d ln [dimer]/dt = k(a)[L] + k(b)[L](2). These trends were found: (1) phosphines are slow to react compared to pyridines, (2) the edt dimer 2 reacts much more rapidly than 1 and 3. Dimer 1 and MeReO(mtp)PPh(3) both catalyze oxygen atom transfer: PicO + PPh(3) --> Pic + Ph(3)PO. Compound 1 is ca. 90 times more reactive, which can be attributed to its lability toward small ligands as opposed to the low rate of displacement of PPh(3) from the mononuclear catalyst. The kinetics of this reaction follows the rate law -d[PicO]/dt = k[PicO][1]/[1 + kappa[PPh(3)]], with k = 5.8 x 10(6) L mol(-1) s(-1) and kappa = 3.5 x 10(2) L mol(-1) at 23 degrees C in benzene. A mechanism has been proposed to account for these findings.

Journal Article↗