PubMed Health⌕ Search

Biomedical subjects

B Jefferson

Publications and source records attributed to B Jefferson.

At least 19 recordsLinked to original sources

The impact of rainstorm events on coagulation and clarifier performance in potable water treatment.

This paper examines turbidity removal at a water treatment works in England that receives raw water which is difficult to treat during certain rainstorm events. Rainstorm events lead to elevated levels of turbidity and organic matter found in river waters. A robustness index based on settled turbidity was used to identify periods and events that adversely affected the treatment process. This coupled with raw water sampling data indicated that a change in nature and an increase in natural organic matter (NOM) concentrations occurred following rainstorm events. Experimental work investigated the effect of temperature and NOM on the coagulation process and the results show how increasing levels of NOM significantly impaired the coagulation of particulate material, leading to an increase in settled turbidity.

England↗

Fate of E. coli across mechanical dewatering processes.

Five UK sludge treatment plants have been monitored for Escherichia coli (E.coli) variation after mechanical belt press and centrifuge dewatering processes. A complementary laboratory trial was also completed to examine the effects of varying centrifugal force on raw sludge E.coli content. An E.coli balance between the numbers contained in the flows entering and exiting four full scale centrifuge dewatering systems indicated a minimum 63 % increase in E.coli numbers between the input feed and sludge cake for a digested sludge input to the centrifuge. For two of the centrifuge sites this increase was statistically significant and corresponded to an increase in E.coli concentration ranging up to 1.4 Log after centrifugation. However, E.coli variation was found to be dependent on the type of sludge, as centrifuge dewatering of raw sludge at full scale resulted in a 40 % decrease in E.coli numbers. The complementary laboratory centrifuge work confirmed that E.coli numbers decreased in raw sludge after centrifugation. E.coli numbers were not observed to increase in digested sludge which had been dewatered using a belt press. A decrease of 44 % was observed.

Centrifugation↗

Surface diagnostics for scale analysis.

Stainless steel, polymethylmethacrylate and polytetrafluoroethylene coupons were analysed for surface topographical and adhesion force characteristics using tapping mode atomic force microscopy and force-distance microscopy techniques. The two polymer materials were surface modified by polishing with silicon carbide papers of known grade. The struvite scaling rate was determined for each coupon and related to the data gained from the surface analysis. The scaling rate correlated well with adhesion force measurements indicating that lower energy materials scale at a lower rate. The techniques outlined in the paper provide a method for the rapid screening of materials in potential scaling applications.

Chemical Precipitation↗

Methods for understanding organic fouling in MBRs.

The identification and quantification of foulants in membrane bioreactors present a major challenge due to their complexity resulting from biomass heterogeneity. Fouling is normally characterised with respect to the critical flux, this being conventionally viewed as being the flux below which a reduction in membrane permeability does not take place. However, recent studies have revealed that such fouling arises even at very low fluxes. Moreover, fouling rates can differ substantially between different experiments, trials and installations even when operated under apparently similar conditions of biomass and soluble organic carbon concentrations. The methods available for quantifying and analysing fouling are reviewed with specific reference to recent data on sub-critical flux behaviour. It is concluded that HPSEC analysis of extracted biomass fractions may provide the most valuable data towards the determination of differences in fouling propensity between different biomasses, as inferred in conventional flux step analysis.

Biofilms↗

Grey water characterisation and its impact on the selection and operation of technologies for urban reuse.

Characterisation of grey water reveals a source water that is similar in organic strength to a low-medium strength municipal sewage influent but with physical and biodegradability characteristics similar to a tertiary treated effluent. The characteristics of the water suggest biological processes are the most suitable unit processes for treating grey water. The highly variable nature of the source requires that selected technologies must be inherently robust in their operation. One potential area of concern is the high COD/BOD ratio and nutrient deficiency in terms of both macro and micro nutrients which grey water exhibits potentially retard the efficacy of biological processes.

Biodegradation, Environmental↗

Developing methods to evaluate odour control products.

An economical and practical alternative to the standard end-of-pipe odour control methods is the application of liquid odour control products. Currently, there are no established product-testing methods. The data that are available are often of questionable quality and may have limited relevance to waste management. Waste facilities receive differing streams of waste at varying loading volumes. Whilst in operation this exposes control products to a wide variety of environmental conditions, further increasing the difficulty of selecting an effective means of control. The current study initially identifies commercially available odour control products applicable for solid and liquid waste management operations. Bench-scale batch absorption tests have been carried out to investigate odorous gas abatement for a range of selected commercial products and water at a range of pH values. Hydrogen sulphide was the test odorous gas, as it is commonly associated with waste processes. Gas-phase volumetric mass-transfer coefficients (KGa) have been calculated to determine mass-transfer performance. The development of a pilot-scale spray tower is then presented as the testing apparatus for future work. This is an attempt to construct a repeatable testing method for evaluating abatement performance of odour control products, and control the problems encountered when applying odour control products to open sites. KGa values and data collected from tests in this study will be considered in future work as design parameters for the rig.

Absorption↗

Flocs through the looking glass.

The paper describes the investigation of how the make up of raw water influences the physical properties of flocculated suspensions. The work focuses on the properties of four characteristic organic fractions separated as a function of their hydrophobicity. Mesoscale data indicates that the hydrophobic fractions dominate the make up of the water and are the most easily removed. Microscale and nanoscale data reveals that the fulvic acid fraction (FAF) generates statistically smaller and more compact flocs than those formed by the other fractions and the hydrophilic fractions form the most internally open and dendritic structures. The FAF fraction was also seen to dominate the zeta potential response of the raw water.

Benzopyrans↗

The duplicity of floc strength.

The breakage of flocs is dependent upon the strength of the bonds holding the aggregate together. The present work describes the breakage and re-growth behaviour of three different types of floc, these were: 1) coagulant precipitate flocs, 2) turbidity flocs and 3) organic matter flocs. Floc aggregates were exposed to increased levels of shear on a conventional jar tester and the sizes of the flocs were observed dynamically using a laser diffraction instrument. The organic flocs showed most resistance to breakage across the whole range of shears under investigation. The dynamic procedure provided detailed information on particle size distributions (PSD). Large and small scale degradation events could be identified from analysis of the PSD data. All of the flocs under investigation showed little re-growth potential after breakage. The precipitate and organic flocs showed slightly better re-aggregation of the small floc sizes.

Flocculation↗

Adaptation of a sandwich enzyme-linked immunosorbent assay to determine the concentration of bovine leukemia virus p24 and optimal conditions for p24 expression in short-term cultures of peripheral blood mononuclear cells.

Bovine leukemia virus (BLV) is a common retroviral infection of cattle. Infection is accompanied by integration of BLV into the host cell genome and is persistent for the life of the individual as is the presence of anti-BLV antibodies. Lymphosarcoma occurs in a small fraction of infected adult individuals but otherwise there is little or no associated disease. Viremia is undetectable, however, BLV is expressed readily once infected cells are cultured in vitro. A sandwich enzyme-linked immunosorbent assay (sELISA) was optimized, using murine monoclonal antibodies, to quantify the major internal structural protein (p24) produced in short-term cultures of peripheral blood mononuclear cells (PBMCs). Optimal production of BLV p24 was achieved utilizing RPMI supplemented with 10% fetal bovine serum (FBS), pH 7, and 5 x 10(6) cells per ml. Cultures were terminated at 24 h. The sELISA was linear between 30 and 900 ng/ml and the limit of detection was 1.2 ng/ml. At three concentrations of p24, intra- and inter-assay coefficients of variation (CV) varied between 9.2 and 13.3 and 5.1 and 12.9%, respectively.

Animals↗

Fluid hydrodynamics in submerged and sidestream membrane bioreactors.

As with all membrane processes, turbulence, as promoted by aeration in submerged membrane bioreactors (MBRs) or pumping in sidestream (SS) systems to produce somewhat higher effective cross-flow velocities, increases mass transfer and reduces fouling. This is manifested in an elevated critical flux, the flux at which the membrane permeability is sustained. However, the non-Newtonian nature of the sludge makes precise rheological characterisation difficult. In this study, a calculation of the appropriate hydrodynamics parameters for a SS MBR configuration is presented. Optimisation of the aeration in a submerged MBR system has been attained by defining the minimum air velocity required for Taylor bubble formation.

Bioreactors↗

The inner ear of dogs with X-linked nephritis provides clues to the pathogenesis of hearing loss in X-linked Alport syndrome.

Alport syndrome is an inherited disorder of type IV collagen with progressive nephropathy, ocular abnormalities, and high-tone sensorineural deafness. In X-linked Alport syndrome, mutations in the COL4A5 gene encoding the alpha5 chain of type IV collagen lead to loss of the alpha3/alpha4/alpha5 network and increased susceptibility of the glomerular basement membrane to long-term damage. The molecular defects that underlie the otopathology in this disease remain poorly understood. We used a canine model of X-linked Alport syndrome to determine the expression of type IV collagen alpha-chains in the inner ear. By 1 month in normal adult dogs, the alpha3, alpha4, and alpha5 chains were co-expressed in a thin continuous line extending along the basilar membrane and the internal and external sulci, with the strongest expression along the lateral aspect of the spiral ligament in the basal turn of the cochlea. Affected dogs showed complete absence of the alpha3/alpha4/alpha5 network. The lateral aspect of the spiral ligament is populated by tension fibroblasts that express alpha-smooth muscle actin and nonmuscle myosin and are postulated to generate radial tension on the basilar membrane via the extracellular matrix for reception of high frequency sound. We propose that in Alport syndrome, the loss of the alpha3/alpha4/alpha5 network eventually weakens the interaction of these cells with their extracellular matrix, resulting in reduced tension on the basilar membrane and the inability to respond to high frequency sounds.

Animals↗

Nutrient addition to enhance biological treatment of greywater.

This study compares the chemical oxygen demand (COD) removal and respiration rates of a microbial population treating real and synthetic greywaters dosed with nutrient supplements. The nutrient composition of the real and synthetic greywaters was analysed and the dosing regime for nitrogen, phosphorus and a range of trace metals planned accordingly. The doses consisted of eight single additives (macronutrients and trace metals) to the control greywater and six trace metal additions to C: N : P balanced greywater. The COD removal for the control real and synthetic greywater in lab-scale activated sludge systems (0.038 and 0.286 kg COD kg MLSS(-1) d(-1), respectively) confirmed nutrient limitation and the poor degree of greywater treatment. Nutrient dosing increased the COD removal rate and oxygen uptake rate in many cases. The greatest stimulation of microbial activity was observed with zinc additions to C: N: P balanced real greywater (1.291 kg COD kg MLSS(-1) d(-1) over 30 times the control). Inhibitory effects to various extents were rare and limited mainly to the additions of metals to synthetic greywater. The dominance of chemicals effects was observed on addition of some micronutrients; notably iron and aluminium, metals on which many coagulants for use in biotreatment of other wastewaters are based. The data indicate that the impact of understanding microbial processes and the nutrients required for wastewater treatment can only serve to optimise process efficiency for the proposed treatment of greywater.

Carbon↗

Advanced biological unit processes for domestic water recycling.

The potential of advanced biological unit operations for the recycling of grey and black waters has been evaluated. The membrane bioreactor (MBR) demonstrated the greatest efficacy towards water recycling in terms of all the quality determinants. Both the biologically aerated filter (BAF) and the MBR were able to effectively treat the organic and physical pollutants in all the types of wastewater tested. The main difference was observed in terms of the microbiological quality, measured as total coliforms. The open bed structure of the BAF enabled passage of coliforms whereas the complete barrier of the MBR produced a non detectable level in the effluent. The MBR process complied with commonly adopted water recycling quality standards for the all determinants during the grey water trials and failed only in terms of total coliform counts once black water had been introduced into the feed. The MBR was seen as a particularly suitable advanced biological process as it was very effective at stabilising out the considerable load variations encountered during the trial.

Bioreactors↗

Direct molecular hydrogen sulphide scrubbing with hollowfibre membranes.

The emission of hydrogen sulphide is a major problem associated with anaerobic treatment of sulphate and sulphite containing wastewaters. Conventional absorbing processes, such as packed towers, spray towers or bubble columns, are all constrained by factors such as flooding and foaming. Membrane systems, on the other hand, enable independent control of the liquid and gas flow rate and a step change order of magnitude increase in the specific surface area of the contact process. The membrane acts as a gas absorber with a design similar to a shell and tube heat exchanger. On the other hand, they are limited by facets of the membrane such as its resistance to mass transfer and permselectivity, as well as its cost. The work presented in this paper refers to an absorption process based on a non-wetted hollow fibre membrane for the scrubbing of hydrogen sulphide from air, with water as the contact solvent. Results presented describe the performance of the unit in terms of overall transfer and outlet liquid concentration as a function of circulation regime, gas flow rate, liquid flow rate and specific surface area. In particular, results are presented using traditional plots of Sherwood number (Sh) against Graetz (Gr) number for the liquid flowing in the lumens, such that experimental and available empirical descriptions of the process performance are directly compared. Results suggest that, as expected, very efficient mass transfer is obtained. However, the mass transfer was found to reach a maximum value against Gr, contrary to available empirical models.

Absorption↗

Recombinant domain III of perlecan promotes cell attachment through its RGDS sequence.

Perlecan has been previously been shown to support attachment of a wide variety of cells through interactions of its core protein with the cell surface. The core protein domains involved in cell adhesion are, however, unknown. The laminin-like domain III of murine perlecan contains an RGDS sequence and is a likely candidate for supporting integrin-mediated cell attachment. We made a cDNA construct corresponding to domain III and containing an in frame signal peptide at the 5' end as well as in frame a stop codon at the 3' end by using cDNA clones to perlecan. The construct was inserted into the pRC/CMV vector and transfected into HT1080 cells, and the secreted recombinant domain III, a 130-kDa protein, was purified from the medium. The size of proteolytic fragments produced by digestion with V8 protease as well as analysis of the rotary shadowed image of the recombinant protein indicated it was produced in a native conformation. Recombinant domain III coated on tissue culture dishes, supports adhesion of an epithelial-like mouse mammary tumor cell line MMT 060562 in a dose-dependent manner. This interaction was inhibited specifically by the RGDS synthetic peptide and intact perlecan, but not laminin. This domain III RGD-dependent cell attachment activity indicates a role for perlecan in integrin-mediated signaling.

Amino Acid Sequence↗

A serological survey of bovine syncytial virus in Ontario: associations with bovine leukemia and immunodeficiency-like viruses, production records, and management practices.

Of the 920 cows tested, 56.7% showed antiretroviral serological reactivity. Prevalence rates (95% confidence interval) of antiretroviral antibodies among individual dairy cows in Ontario were: BIV 5.5% (4.0-7.0), BLV 25.7% (22.9-28.6), and BSV 39.6% (36.4-42.8). The following percentages of cows showed serological reactivity against the specified retroviruses: BIV 2.3%, BLV 14.0%, BSV 27.5%, BIV and BSV 1.3%, BIV and BLV 0.9%, BLV and BSV 9.9%, BIV and BLV and BSV 0.9%. These rates of sero-positivity are similar to those found in other countries. Serological test results were not adjusted for sensitivity and specificity. The prevalence rates of antibodies to the three retroviruses (BIV, BLV, and BSV) were significantly different, but no associations were observed between specific retroviral serological test results among individual cows. The prevalence rates of BIV and BSV seropositivity were constant across Ontario, whereas, there was a significant trend for the prevalence rate of BLV seropositivity to decrease going from southwestern to eastern Ontario; cows in eastern Ontario had approximately half the prevalence rate of those in southwestern Ontario. Cows that were seropositive for BSV were significantly older than BSV seronegative cows. There was no association between culling rate and BSV serology. Significant negative associations were found with winter or summer housing of calves separate from adults and summer outdoor exercise for dry cows. The use of calf hutches in the summer had a significant positive association with BSV seropositivity. Regression analyses were done to assess the association of retroviral (BIV, BLV, and BSV) seropositivity on calving interval, milk somatic cell count, and milk production. Serological test results for BIV, BLV, and BSV were entered into all models and all models were adjusted for intra-cluster (intraherd) correlation. Herd size and age were found to be important confounding variables. BIV seropositivity was not associated with any changes in production using this approach, however when considered in isolation BIV seropositivity remained associated with decreased milk production. BLV seropositivity was significantly associated with longer calving intervals and higher somatic cell counts in older cows. As well, in older cows, BSV seropositivity was significantly associated with higher milk production.

Age Factors↗

Haematological and lymphocyte subset analyses in sheep inoculated with bovine immunodeficiency-like virus.

Bovine immunodeficiency-like virus (BIV) was passaged in vivo by intraperitoneal transfusion of ovine whole blood. Prior to transfusion, the recipient sheep were given sodium thioglycolate intraperitoneally to induce mild non-suppurative inflammation. The anti-BIV antibody response, haematology, and peripheral blood lymphocyte subsets (B, gamma delta, CD2+, CD4+ and CD8+) of recipient sheep were assessed for one year following transfusion. Passaging was successful since serum anti-BIV antibody responses were detected in 5 of the 6 recipient sheep; 1 of the 5 remained seropositive throughout the study. Lentivirus was not isolated from the recipient sheep, but provirus was detected by the polymerase chain reaction in DNA from peripheral blood leukocytes in 3 of the 5 sheep that seroconverted. In the BIV-inoculated sheep, neutrophils and eosinophils were significantly increased (p < or = 0.05) at 3 months and between 6 and 8 months postinoculation, respectively. B, CD2+ and CD4+ cells and the CD4+/CD8+ ratios were significantly increased (p < or = 0.05) 2 months postinoculation. Mild, transient haematological changes occurred in BIV-exposed sheep, but illness was not detected in the year.

Animals↗

Detection of bovine leukemia virus RNA in serum using the polymerase chain reaction.

A method was developed for detecting bovine leukemia virus (BLV) RNA in serum samples using a pair of primers from the BLV polymerase gene in the polymerase chain reaction (PCR). The PCR was able to detect 3800-7600 molecules of BLV RNA. At this level of sensitivity eleven pools of adult and one fetal bovine serum appeared free from BLV contamination.

Animals↗