PubMed Health⌕ Search

Biomedical subjects

B Kasemo

Publications and source records attributed to B Kasemo.

46 records · Page 3Linked to original sources

Site-specific adhesion of Staphylococcus epidermidis (RP12) in Ti-Al-V metal systems.

Staphylococcus epidermidis (RP12) adhesion patterns were studied on the following titanium (Ti)-aluminium (Al)-vanadium (V) metal systems: (i) microfabricated samples consisting of Ti, Al and V islands deposited onto Ti or V substrata, (ii) pure Ti, Al and V metals, and (iii) medical grade Ti6Al4-V alloy. All of these surfaces were covered with their respective oxides formed upon exposure of the metals to air. Quantitative analysis of the number of cells bound per unit area indicates that S. epidermidis (RP12) exhibits greatest adhesion to pure V surfaces. When exposed to surfaces having controlled spatial variations in chemical composition on the 10 microns scale (microfabricated samples), the bacteria preferentially populate V islands versus Ti or Al substrata. In the case of the biphasic Ti6Al4V alloy, the bacteria tend to adhere to V-rich, mixed phase regions and phase boundaries. These findings demonstrate that enhanced and preferential adhesion of S. epidermidis (RP12) occurs on V surfaces in Ti-Al-V metal systems and suggest that bacterial interactions are influenced by surface oxide composition.

Alloys↗

Material-tissue interfaces: the role of surface properties and processes.

The introduction of a foreign material into living tissue--intentionally as in biomedical applications (implants, protheses, drugs) or unintentionally as when minerals or fibers are inhaled--results in the creation of interfaces between the material and the surrounding tissue. This article identifies and discusses the possible role of material surface properties and molecular processes occurring at such interfaces. For kinetic and thermodynamic reasons, surfaces are different from the corresponding bulk of the material, and contain reactive (unsaturated) bonds, which in turn lead to the formation of surface reactive layers (e.g., surface oxides on metals) and adsorbed contamination layers. The encounter with the biological environment leads to further surface reactions modifying the surface, and to the adsorption of water, ions, and biomolecules, which are continuously exchanged. The exact nature of the dynamic, adsorbed water, ions, and biomolecule coating in turn influences the behavior of cells approaching the material surface, and hence the tissue response.

Animals↗

Preparation of ultra-thin oxide windows on titanium for TEM analysis.

Using submerged jet electropolishing, extremely thin (less than 10 nm), continuous, thermal oxide "windows" have been prepared on polycrystalline titanium (Ti). The preparation technique is described in detail. It has allowed a systematic investigation of the structure of thermal surface oxide layers on Ti in the thickness range 6-40 nm, corresponding to oxidation temperatures 100-450 degrees C. Auger electron spectroscopy was used for oxide characterization and for depth profiling to determine oxide thickness. The thinnest oxides, less than 10 nm, are amorphous, morphologically homogeneous, and with essentially no contrast in the transmission electron microscopy (TEM) pictures. As the oxide thickness is increased up to 40 nm, a texture corresponding to the grain structure of the oxidized metal becomes gradually more visible. At the same time the oxide becomes increasingly more crystalline. The results are compared with previously published corresponding results for thicker anodic oxides on Ti.

Microscopy, Electron↗

Method for ultrastructural studies of the intact tissue-metal interface.

Samples were prepared for ultrastructural studies of the intact interface between metallic implants and tissue by transmission electron microscopy. The method is based on plastic embedding of implant and tissue and subsequent removal of the bulk metal by electrochemical dissolution (electropolishing), to facilitate preparation of ultrathin sections for transmission electron microscopy. Surface sensitive spectroscopy (Auger electron microscopy and X-ray photoemission spectroscopy) and transmission electron microscopy EDX results show that the method produces samples with an intact interface, containing the implant surface oxide and the adjacent tissue. Examples of application of the method on titanium, zirconium and aluminium implants in soft tissue are given.

Aluminum↗

Biomaterial and implant surfaces: on the role of cleanliness, contamination, and preparation procedures.

Material specificity in implant-tissue interactions derives primarily from the surface properties (chemical composition, microstructure, etc.) of the implant. This article addresses several questions related to implant and biomaterial surfaces: What is the status of real implant surfaces (composition, cleanliness, contamination, microstructure, etc.), and how does it vary with preparation procedures? Can the surface status be varied and analyzed in a controlled manner? How significant are surface status variations for in vivo function? And so on. We discuss clean surfaces, how they are contaminated, and how the contamination may affect the properties. We also discuss different preparation procedures, such as conventional machining, plasma treatment, and sterilization. Three important conclusions are drawn: (i) The surface status of a particular implant material may vary widely depending on its preparation and handling history. (ii) The surface status of implants is expected to be important for in vivo function, and should thus be controlled and standardized. (iii) It is usually not possible to predict how a change in surface status will affect the long-term, in vivo function of an implant.

Biocompatible Materials↗

Accelerated oxide growth on titanium implants during autoclaving caused by fluorine contamination.

Titanium implants were occasionally found to be strongly discoloured after autoclaving. The discolouration is shown to be due to an accelerated growth of the surface oxide that covers the implants. Oxide thicknesses up to 650 A have been observed, i.e. more than ten times thicker than on normal implants. By applying surface sensitive spectroscopies (SIMS and XPS or ESCA) it is also shown that these oxide films contain considerable amounts of fluorine, alkali metals and silicon. Screening tests with alkali-halide solutions identify fluorine as the impurity responsible for the accelerated oxide growth. Discolouration after autoclaving can be observed for fluorine contaminations down to the ppm level. In those cases where discolouration was observed in the clinical situation, the source of fluorine was the textile cloths in which the titanium implant storage box had been wrapped during the autoclaving procedure. The cloths contained residual Na2SiF6 which had been used as an additive to the rinsing water used in the last step of the cloth laundry procedure. Since the biocompatibility of titanium implants is closely related to their surface oxides it is advisable to avoid all sources of fluorine in the implant preparation procedures.

Color↗