Converting T4 phage lysozyme into a transglycosidase.
Explore the source record for details and available documents.
Amino Acid Substitution↗
Biomedical subjects
B W Matthews
Publications and source records attributed to B W Matthews.
The anti-angiogenic agent fumagillin covalently modifies a conserved active-site histidine in the Escherichia coli methionine aminopeptidase.
Methionine aminopeptidase (MetAP) exists in two forms (type I and type II), both of which remove the N-terminal methionine from proteins. It previously has been shown that the type II enzyme is the molecular target of fumagillin and ovalicin, two epoxide-containing natural products that inhibit angiogenesis and suppress tumor growth. By using mass spectrometry, N-terminal sequence analysis, and electronic absorption spectroscopy we show that fumagillin and ovalicin covalently modify a conserved histidine residue in the active site of the MetAP from Escherichia coli, a type I enzyme. Because all of the key active site residues are conserved, it is likely that a similar modification occurs in the type II enzymes. This modification, by occluding the active site, may prevent the action of MetAP on proteins or peptides involved in angiogenesis. In addition, the results suggest that these compounds may be effective pharmacological agents against pathogenic and resistant forms of E. coli and other microorganisms.
Aminopeptidases↗
Structural, functional, and evolutionary relationships between lambda-exonuclease and the type II restriction endonucleases.
lambda-exonuclease participates in DNA recombination and repair. It binds a free end of double-stranded DNA and degrades one strand in the 5' to 3' direction. The primary sequence does not appear to be related to any other protein, but the crystal structure shows part of lambda-exonuclease to be similar to the type II restriction endonucleases PvuII and EcoRV. There is also a weaker correspondence with EcoRI, BamHI, and Cfr10I. The structure comparisons not only suggest that these enzymes all share a similar catalytic mechanism and a common structural ancestor but also provide strong evidence that the toroidal structure of lambda-exonuclease encircles its DNA substrate during hydrolysis.
Animals↗
Crystal structure of lambda-Cro bound to a consensus operator at 3.0 A resolution.
The structure of the Cro protein from bacteriophage lambda in complex with a 19 base-pair DNA duplex that includes the 17 base-pair consensus operator has been determined at 3.0 A resolution. The structure confirms the large changes in the protein and DNA seen previously in a crystallographically distinct low-resolution structure of the complex and, for the first time, reveals the detailed interactions between the side-chains of the protein and the base-pairs of the operator. Relative to the crystal structure of the free protein, the subunits of Cro rotate 53 degrees with respect to each other on binding DNA. At the same time the DNA is bent by 40 degrees through the 19 base-pairs. The intersubunit connection includes a region within the protein core that is structurally reminiscent of the "ball and socket" motif seen in the immunoglobulins and T-cell receptors. The crystal structure of the Cro complex is consistent with virtually all available biochemical and related data. Some of the interactions between Cro and DNA proposed on the basis of model-building are now seen to be correct, but many are different. Tests of the original model by mutagenesis and biochemical analysis corrected some but not all of the errors. Within the limitations of the crystallographic resolution it appears that operator recognition is achieved almost entirely by direct hydrogen-bonding and van der Waals contacts between the protein and the exposed bases within the major groove of the DNA. The discrimination of Cro between the operators OR3 and OR1, which differ in sequence at just three positions, is inferred to result from a combination of small differences, both favorable and unfavorable. A van der Waals contact at one of the positions is of primary importance, while the other two provide smaller, indirect effects. Direct hydrogen bonding is not utilized in this distinction.
Bacteriophage lambda↗
Refined structure of Cro repressor protein from bacteriophage lambda suggests both flexibility and plasticity.
The structure of the Cro repressor protein from phage lambda has been refined to a crystallographic R-value of 19.3% at 2.3 A resolution. The re fined model supports the structure as originally described in 1981 and provides a basis for comparison with the Cro-operator complex described in the accompanying paper. Changes in structure seen in different crystal forms and modifications of Cro suggest that the individual subunits are somewhat plastic in nature. In addition, the dimer of Cro suggests a high degree of flexibility, which may be important in forming the Cro-DNA complex. The structure of the Cro subunit as determined by NMR agrees reasonably well with that in the crystals (root-mean-square discrepancy of about 2 A for all atoms). There are, however, only a limited number of intersubunit distance constraints and, presumably for this reason, the different NMR models for the dimer vary substantially among themselves (discrepancies of 1.3 to 5.5 A). Because of this variation it is not possible to say whether the range of discrepancies between the X-ray and NMR Cro dimers (2.9 to 7.5 A) represent a significant difference between the X-ray and solution structures. It has previously been proposed that substitutions of Tyr26 in Cro increase thermal stability by the "reverse hydrophobic effect", i.e. by exposing 40% more hydrophobic surface to solvent in the folded form than in the unfolded state. The refined structure, however, suggests that Tyr26 is equally solvent exposed in the folded and unfolded states. The most stabilizing substitution is Tyr26-->Asp and in this case it appears that interaction with an alpha-helix dipole is at least partly responsible for the enhanced stability.
Bacteriophage lambda↗
How Cro and lambda-repressor distinguish between operators: the structural basis underlying a genetic switch.
Knowledge of the three-dimensional structures of the lambda-Cro and lambda-repressor proteins in complex with DNA has made it possible to evaluate how these proteins discriminate between different operators in phage lambda. As anticipated in previous studies, the helix-turn-helix units of the respective proteins bind in very different alignments. In Cro the recognition helices are 29 A apart and are tilted by 55 degrees with respect to each other, but bind parallel to the major groove of the DNA. In lambda-repressor [Beamer, L. J. & Pabo, C. O. (1992) J. Mol. Biol. 227, 177-196] the helices are 34 A apart and are essentially parallel to each other, but are inclined to the major grooves. The DNA is much more bent when bound by Cro than in the case with lambda-repressor. The first two amino acids of the recognition helices of the two proteins, Gln-27 and Ser-28 in Cro, and Gln-44 and Ser-45 in lambda-repressor, make very similar interactions with the invariant bps 2 and 4. There are also analogous contacts between the thymine of bp 5 and, respectively, the backbone of Ala-29 of Cro and the backbone of Gly-46 of lambda-repressor. Otherwise, however, unrelated parts of the two proteins are used in sequence-specific recognition. It appears that similar contacts to the invariant or almost invariant bps (especially 2 and 4) are used by both Cro and lambda-repressor to differentiate the operator sites as a group from other sites on the DNA. The discrimination of Cro and lambda-repressor between their different operators is more subtle and seems to be achieved primarily through differences in van der Waals contacts at bp 3', together with weaker, less direct effects at bps 5' and 8', all in the nonconsensus half of the operators. The results provide further support for the idea that there is no simple code for DNA-protein recognition.
Bacteriophage lambda↗
Generation of ligand binding sites in T4 lysozyme by deficiency-creating substitutions.
Several variants of T4 lysozyme have been identified that sequester small organic ligands in cavities or clefts. To evaluate potential binding sites for non-polar molecules, we screened a number of hydrophobic large-to-small mutants for stabilization in the presence of benzene. In addition to Leu99-->Ala, binding was indicated for at least five other mutants. Variants Met102-->Ala and Leu133-->Gly, and a crevice mutant, Phe104-->Ala, were further characterized using X-ray crystallography and thermal denaturation. As predicted from the shape of the cavity in the benzene complex, mutant Leu133-->Gly also bound p-xylene. We attempted to enlarge the cavity of the Met102-->Ala mutant into a deep crevice through an additional substitution, but the double mutant failed to bind ligands because an adjacent helix rearranged into a non-helical structure, apparently due to the loss of packing interactions. In general, the protein structure contracted slightly to reduce the volume of the void created by truncating substitutions and expanded upon binding the non-polar ligand, with shifts similar to those resulting from the mutations.A polar molecule binding site was also created by truncating Arg95 to alanine. This creates a highly complementary buried polar environment that can be utilized as a specific "receptor" for a guanidinium ion. Our results suggest that creating a deficiency through truncating mutations of buried residues generates "binding potential" for ligands with characteristics similar to the deleted side-chain. Analysis of complex and apo crystal structures of binding and non-binding mutants suggests that ligand size and shape as well as protein flexibility and complementarity are all determinants of binding. Binding at non-polar sites is governed by hydrophobicity and steric interactions and is relatively permissive. Binding at a polar site is more restrictive and requires extensive complementarity between the ligand and the site.
Bacteriophage T4↗
The response of T4 lysozyme to large-to-small substitutions within the core and its relation to the hydrophobic effect.
To further examine the structural and thermodynamic basis of hydrophobic stabilization in proteins, all of the bulky non-polar residues that are buried or largely buried within the core of T4 lysozyme were substituted with alanine. In 25 cases, including eight reported previously, it was possible to determine the crystal structures of the variants. The structures of four variants with double substitutions were also determined. In the majority of cases the "large-to-small" substitutions lead to internal cavities. In other cases declivities or channels open to the surface were formed. In some cases the structural changes were minimal (mainchain shifts < or = 0.3 A); in other cases mainchain atoms moved up to 2 A. In the case of Ile 29 --> Ala the structure collapsed to such a degree that the volume of the putative cavity was zero. Crystallographic analysis suggests that the occupancy of the engineered cavities by solvent is usually low. The mutants Val 149 --> Ala (V149A) and Met 6 --> Ala (M6A), however, are exceptions and have, respectively, one and two well-ordered water molecules within the cavity. The Val 149 --> Ala substitution allows the solvent molecule to hydrogen bond to polar atoms that are occluded in the wild-type molecule. Similarly, the replacement of Met 6 with alanine allows the two solvent molecules to hydrogen bond to each other and to polar atoms on the protein. Except for Val 149 --> Ala the loss of stability of all the cavity mutants can be rationalized as a combination of two terms. The first is a constant for a given class of substitution (e.g., -2.1 kcal/mol for all Leu --> Ala substitutions) and can be considered as the difference between the free energy of transfer of leucine and alanine from solvent to the core of the protein. The second term can be considered as the energy cost of forming the cavity and is consistent with a numerical value of 22 cal mol(-1) A(-3). Physically, this term is due to the loss of van der Waal's interactions between the bulky sidechain that is removed and the atoms that form the wall of the cavity. The overall results are consistent with the prior rationalization of Leu --> Ala mutants in T4 lysozyme by Eriksson et al. (Eriksson et al., 1992, Science 255:178-183).
Alanine↗
Context-dependent protein stabilization by methionine-to-leucine substitution shown in T4 lysozyme.
The substitution of methionines with leucines within the interior of a protein is expected to increase stability both because of a more favorable solvent transfer term as well as the reduced entropic cost of holding a leucine side chain in a defined position. Together, these two terms are expected to contribute about 1.4 kcal/mol to protein stability for each Met --> Leu substitution when fully buried. At the same time, this expected beneficial effect may be offset by steric factors due to differences in the shape of leucine and methionine. To investigate the interplay between these factors, all methionines in T4 lysozyme except at the amino-terminus were individually replaced with leucine. Of these mutants, M106L and M120L have stabilities 0.5 kcal/mol higher than wild-type T4 lysozyme, while M6L is significantly destabilized (-2.8 kcal/mol). M102L, described previously, is also destabilized (-0.9 kcal/mol). Based on this limited sample it appears that methionine-to-leucine substitutions can increase protein stability but only in a situation where the methionine side chain is fully or partially buried, yet allows the introduction of the leucine without concomitant steric interference. The variants, together with methionine-to-lysine substitutions at the same sites, follow the general pattern that substitutions at rigid, internal sites tend to be most destabilizing, whereas replacements at more solvent-exposed sites are better tolerated.
Bacteriophage T4↗
Crystal structure of an engineered Cro monomer bound nonspecifically to DNA: possible implications for nonspecific binding by the wild-type protein.
The structure has been determined at 3.0 A resolution of a complex of engineered monomeric Cro repressor with a seven-base pair DNA fragment. Although the sequence of the DNA corresponds to the consensus half-operator that is recognized by each subunit of the wild-type Cro dimer, the complex that is formed in the crystals by the isolated monomer appears to correspond to a sequence-independent mode of association. The overall orientation of the protein relative to the DNA is markedly different from that observed for Cro dimer bound to a consensus operator. The recognition helix is rotated 48 degrees further out of the major groove, while the turn region of the helix-turn-helix remains in contact with the DNA backbone. All of the direct base-specific interactions seen in the wild-type Cro-operator complex are lost. Virtually all of the ionic interactions with the DNA backbone, however, are maintained, as is the subset of contacts between the DNA backbone and a channel on the protein surface. Overall, 25% less surface area is buried at the protein DNA interface than for half of the wild-type Cro-operator complex, and the contacts are more ionic in character due to a reduction of hydrogen bonding and van der Waals interactions. Based on this crystal structure, model building was used to develop a possible model for the sequence-nonspecific interaction of the wild-type Cro dimer with DNA. In the sequence-specific complex, the DNA is bent, the protein dimer undergoes a large hinge-bending motion relative to the uncomplexed form, and the complex is twofold symmetric. In contrast, in the proposed nonspecific complex the DNA is straight, the protein retains a conformation similar to the apo form, and the complex lacks twofold symmetry. The model is consistent with thermodynamic, chemical, and mutagenic studies, and suggests that hinge bending of the Cro dimer may be critical in permitting the transition from the binding of protein at generic sites on the DNA to binding at high affinity operator sites.
Bacteriophage lambda↗
A new DNA-binding motif in the Skn-1 binding domain-DNA complex.
The DNA-binding domain of Skn-1, a developmental transcription factor that specifies mesoderm in C. elegans, is shown by X-ray crystallography to have a novel fold in which a compact, monomeric, four-helix unit organizes two DNA-contact elements. At the C-terminus, a helix extends from the domain to occupy the major groove of DNA in a manner similar to bZip proteins. Skn-1, however, lacks the leucine zipper found in all bZips. Additional contacts with the DNA are made by a short basic segment at the N-terminus of the domain, reminiscent of the 'homeodomain arm'.
Amino Acid Sequence↗
Toroidal structure of lambda-exonuclease.
Structure determination at 2.4 angstrom resolution shows that lambda-exonuclease consists of three subunits that form a toroid. The central channel is funnel shaped, tapering from an inner diameter of about 30 angstroms at the wider end to 15 angstroms at the narrow end. This is adequate to accommodate the DNA substrate and thus provides a structural basis for the ability of the enzyme to sequentially hydrolyze thousands of nucleotides in a highly processive manner. The results also suggest the locations of the active sites and the constraints that limit cleavage to a single strand.
Bacteriophage lambda↗
Escherichia coli repressor of biotin biosynthesis.
Explore the source record for details and available documents.
Base Sequence↗
Picture story. Nice guys needn't finish last.
Explore the source record for details and available documents.
Crystallography, X-Ray↗
A test of the "jigsaw puzzle" model for protein folding by multiple methionine substitutions within the core of T4 lysozyme.
To test whether the structure of a protein is determined in a manner akin to the assembly of a jigsaw puzzle, up to 10 adjacent residues within the core of T4 lysozyme were replaced by methionine. Such variants are active and fold cooperatively with progressively reduced stability. The structure of a seven-methionine variant has been shown, crystallographically, to be similar to wild type and to maintain a well ordered core. The interaction between the core residues is, therefore, not strictly comparable with the precise spatial complementarity of the pieces of a jigsaw puzzle. Rather, a certain amount of give and take in forming the core structure is permitted. A simplified hydrophobic core sequence, imposed without genetic selection or computer-based design, is sufficient to retain native properties in a globular protein.
Amino Acid Sequence↗
Control of the catalytic mechanism of an enzyme by amino acid substitution.
Explore the source record for details and available documents.
Bacteriophage T4↗
Thermodynamic and structural compensation in "size-switch" core repacking variants of bacteriophage T4 lysozyme.
Previous analysis of randomly generated multiple mutations within the core of bacteriophage T4 lysozyme suggested that the "large-to-small" substitution Leu121 to Ala (L121A) and the spatially adjacent "small-to-large" substitution Ala129 to Met (A129M) might be mutually compensating. To test this hypothesis, the individual variants L121A and A129M were generated, as well as the double "size-switch" mutant L121A/A129M. To make the interchange symmetrical, the combination of L121A with A129L to give L121A/A129L was also constructed. The single mutations were all destabilizing. Somewhat surprisingly, the small-to-large substitutions, which increase hydrophobic stabilization but can also introduce strain, were less deleterious than the large-to-small replacements. Both Ala129 --> Leu and Ala129 --> Met offset the destabilization of L121A by about 50%. Also, in contrast to typical Leu --> Ala core substitutions, which destabilize by 2 to 5 kcal/mol, Leu121 --> Ala slightly stabilized A129L and A129M. Crystal structure analysis showed that a combination of side-chain and backbone adjustments partially accommodated changes in side-chain volume, but only to a limited degree. For example, the cavity that was created by the Leu121 to Ala replacement actually became larger in L121A/A129L. The results demonstrate that the destabilization associated with a change in volume of one core residue can be specifically compensated by an offsetting volume change in an adjacent residue. It appears, however, that complete compensation is unlikely because it is difficult to reconstitute an equivalent set of interactions. The relatively slow evolution of core relative to surface residues appears, therefore, to be due to two factors. First, a mutation in a single core residue that results in a substantial change in size will normally lead to a significant loss in stability. Such mutations will presumably be selected against. Second, if a change in bulk does occur in a buried residue, it cannot normally be fully compensated by a mutation of an adjacent residue. Thus, the most probable response will tend to be reversion to the parent protein.
Bacteriophage T4↗
High-resolution structure of an engineered Cro monomer shows changes in conformation relative to the native dimer.
A rationally designed, genetically engineered, monomeric form of the Cro protein from bacteriophage lambda has been crystallized and its structure determined by isomorphous replacement and refined to a resolution of 1.54 A. The structure confirms the rationale of the design but, at the same time, reveals 1-2 A shifts throughout the monomer structure relative to the previously determined structure of the dimeric wild-type protein. These changes include a 1.6 A main-chain shift in part of the beta-sheet region of the molecule relative to the alpha-helical region and a 1.1 A shift of a buried phenylalanine within the core as well as a correlated 2.2 A shift in a solvent-exposed beta-hairpin. The conformational adjustments appear to reflect an inherent flexibility of the protein that is associated with its DNA-binding function.
DNA↗