Biomedical subjects

Balaji Narasimhan

Publications and source records attributed to Balaji Narasimhan.

11 recordsLinked to original sources

PubMed2006

Amphiphilic polyanhydrides for protein stabilization and release.

The overall goal of this research is to design novel amphiphilic biodegradable systems based on polyanhydrides for the stabilization and sustained release of peptides and proteins. Accordingly, copolymers of the anhydrides, 1,6-bis(p-carboxyphenoxy)hexane (CPH) and 1,8-bis(p-carboxyphenoxy)-3,6-dioxaoctane (CPTEG), which are monomer-containing oligomeric ethylene glycol moieties, have been synthesized. Microspheres of different CPTEG:CPH compositions have been fabricated by two non-aqueous methods: solid/oil/oil double emulsion and cryogenic atomization. The ability of this amphiphilic polymeric system to stabilize model proteins (i.e., lysozyme and ovalbumin) was investigated. The structure of both the encapsulated as well as the released protein was monitored using gel electrophoresis, circular dichroism, and fluorescence spectroscopy. It was found that the CPTEG:CPH system preserves the structural hierarchy of the encapsulated proteins. Activity studies of the released protein indicate the CPTEG:CPH system retains the biological activity of the released protein. These results are promising for future in vivo studies, which involve the design of novel biodegradable polyanhydride carriers for the stabilization and sustained release of therapeutic peptides and proteins.

Amino Acid Sequence↗

PubMed2006

Single dose vaccine based on biodegradable polyanhydride microspheres can modulate immune response mechanism.

This study focuses on the development of single dose vaccines based on biodegradable polyanhydride microspheres that have the unique capability to modulate the immune response mechanism. The polymer system employed consists of copolymers of 1,6-bis(p-carboxyphenoxy)hexane and sebacic acid. Two copolymer formulations that have been shown to provide extended release kinetics and protein stability were investigated. Using tetanus toxoid (TT) as a model antigen, in vivo studies in C3H/HeOuJ mice demonstrated that the encapsulation procedure preserves the immunogenicity of the TT. The polymer itself exhibited an adjuvant effect, enhancing the immune response to a small dose of TT. The microspheres provided a prolonged exposure to TT sufficient to induce both a primary and a secondary immune response (i.e., high antibody titers) with high-avidity antibody production, without requiring an additional administration. Antigen-specific proliferation 28 weeks after a single immunization indicated that immunization with the polyanhydride microspheres generated long-lived memory cells and plasma cells (antibody-secreting B cells) that generally do not occur without maturation signals from T helper cells. Furthermore, by altering the vaccine formulation, the overall strength of the T helper type 2 immune response was selectively diminished, resulting in a balanced immune response, without reducing the overall titer. This result is striking, considering free TT induces a T helper type 2 immune response, and has important implications for developing vaccines to intracellular pathogens. The ability to selectively tune the immune response without the administration of additional cytokines or noxious adjuvants is a unique feature of this delivery vehicle that may make it an excellent candidate for vaccine development.

Animals↗

PubMed2006

Protein stability in the presence of polymer degradation products: consequences for controlled release formulations.

When encapsulating proteins in polymer microspheres for sustained drug delivery there are three stages during which the stability of the protein must be maintained: (1) the fabrication of the microspheres, (2) the storage of the microspheres, and (3) the release of the encapsulated protein. This study focuses on the effects of polymer degradation products on the primary, secondary, and tertiary structure of tetanus toxoid, ovalbumin (Ova), and lysozyme after incubation for 0 or 20 days in the presence of ester (lactic acid and glycolic acid) and anhydride (sebacic acid and 1,6-bis(p-carboxyphenoxy)hexane) monomers. The structure and antigenicity or enzymatic activity of each protein in the presence of each monomer was quantified. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis, circular dichroism, and fluorescence spectroscopy were used to assess/evaluate the primary, secondary, and tertiary structures of the proteins, respectively. Enzyme-linked immunosorbent assay was used to measure changes in the antigenicity of tetanus toxoid and Ova and a fluorescence-based assay was used to determine the enzymatic activity of lysozyme. Tetanus toxoid was found to be the most stable in the presence of anhydride monomers, while Ova was most stable in the presence of sebacic acid, and lysozyme was stable when incubated with all of the monomers studied.

Animals↗

PubMed2006

Synthesis and characterization of novel polyanhydrides with tailored erosion mechanisms.

We have designed a new synthesis route to create polyanhydrides based on monomers that contain hydrophilic entities within highly hydrophobic backbones. The method results in polyanhydrides that can be easily processed into drug-containing tablets. The synthesis, characterization, and erosion studies of polyanhydride copolymers based on 1,6-bis(p-carboxyphenoxy)hexane (CPH), which is highly hydrophobic, and 1,8-bis(p-carboxyphenoxy)-3,6-dioxaoctane (CPTEG), which has hydrophilic oligomeric ethylene glycol segments in the monomer unit, was performed using a combination of molecular spectroscopy, thermal analysis, gravimetry, and scanning electron microscopy. The studies demonstrate that by increasing the CPH content in the CPTEG:CPH copolymers, the erosion of the system can be tailored from bulk-eroding to surface-eroding mechanism. These systems have promise as protein carriers.

Biocompatible Materials↗

PubMed2005

Characterization of fate and transport of isoxaflutole, a soil-applied corn herbicide, in surface water using a watershed model.

The objective of this study is to conduct a comprehensive assessment of the transport of isoxaflutole and RPA 202248 and their accumulation potential in semistatic water bodies, using a distributed watershed scale model and observed water quality data. A conceptual model was developed to characterize the fate and transport of isoxaflutole residues to and in surface water. The soil and water assessment tool (SWAT), a continuous daily time-step watershed model, was used to simulate the processes identified in the conceptual model. Monitoring data were available for a number of surface water bodies within the major product use area as a result of extensive and intensive residue monitoring. Detailed product use information at the zip-code level was obtained through dealer sales and a grower survey. The hydrologic and chemical transport results from the SWAT model were validated by comparison to available monitoring data from selected water bodies. Upon validation, the model was used to simulate the fate of isoxaflutole-derived residues in the water bodies using long-term historical weather data. The results from this investigation indicate no evidence of long-term accumulation of isoxaflutole and its metabolite RPA 202248 in semistatic water bodies.

Chemical Phenomena↗

PubMed2004

Encapsulation, stabilization, and release of BSA-FITC from polyanhydride microspheres.

In order to determine the efficacy of using polyanhydrides as a carrier for therapeutic proteins, the model protein bovine serum albumin labeled with fluorescein isothiocyanate (BSA-FITC) was encapsulated in microspheres of poly sebacic anhydride (poly(SA)), and random copolymers of poly(SA) and poly(1,6-bis-p-carboxyphenoxy)hexane (poly(CPH)). The microspheres were fabricated via the double emulsion (water/oil/water) technique and were characterized using scanning electron microscopy, gel permeation chromatography, confocal microscopy, and a Coulter counter. The effect of protein loading, protein distribution, and change in polymer composition was examined in an in vitro release study. The secondary structure of the encapsulated BSA-FITC was determined with Fourier transform infrared spectroscopy. The primary structure of the released protein was analyzed using sodium dodecyl sulfate polyacrylamide gel electrophoresis. Poly(SA) and 20:80 (CPH:SA) microspheres were found to conserve the primary structure of the released protein and the secondary structure of the encapsulated protein, and showed a sustained delivery for approximately 15 and 30 days, respectively. As the CPH content in the copolymer increased, the secondary structure of FITC-BSA was not conserved, as indicated by the steep decrease in the alpha-helix content.

Electrophoresis, Polyacrylamide Gel↗

PubMed2004

Microsphere size, precipitation kinetics and drug distribution control drug release from biodegradable polyanhydride microspheres.

A thorough understanding of the factors affecting drug release mechanisms from surface-erodible polymer devices is critical to the design of optimal delivery systems. Poly(sebacic anhydride) (PSA) microspheres were loaded with three model drug compounds (rhodamine B, p-nitroaniline and piroxicam) with a range of polarities (water solubilities). The drug release profiles from monodisperse particles of three different sizes were compared to release from polydisperse microspheres. Each of the model drugs exhibited different release mechanisms. Drug distribution within the polymer was investigated by laser scanning confocal microscopy and scanning electron microscopy. Rhodamine, the most hydrophilic compound investigated, was localized strongly toward the microsphere surface, while the much more hydrophobic compound, piroxicam, distributed more evenly. Furthermore, all three compounds were most uniformly distributed in the smallest microspheres, most likely due to the competing effects of drug diffusion out of the nascent polymer droplets and the precipitation of polymer upon solvent extraction, which effectively "traps" the drug in the polymer matrix. The differing drug distributions were manifested in the drug release profiles. Rhodamine was released very quickly independent of microsphere size. Thus, extended release profiles may not be obtainable if the drug strongly redistributes in the microspheres. The release of p-nitroaniline was more prolonged, but still showed little dependence on microsphere size. Hence, when water-soluble drugs are encapsulated with hydrophobic polymers, it may be difficult to tailor release profiles by controlling microsphere size. The piroxicam-loaded microspheres exhibit the most interesting release profiles, showing that release duration can be increased by decreasing microsphere size, resulting in a more uniform drug distribution.

Anhydrides↗

PubMed2002

Mechanistic relationships between polymer microstructure and drug release kinetics in bioerodible polyanhydrides.

This work investigates the relationship between polymer microstructure and drug release kinetics in the bioerodible polyanhydride system, poly[(1,6-bis-p-carboxyphenoxy hexane)-co-(sebacic anhydride)] (CPH-SA). Model drugs, p-nitroaniline (PNA) and disperse yellow 3 (DY), were selected based on compatibility with CPH and SA, respectively. The polymer microstructure and compatibility of the drug with the constituent monomers were determined to have significant influence over the release kinetics of the drugs studied. Polymer systems with homogeneous microstructure, poly(SA) and 50:50 CPH-SA, showed simultaneous polymer degradation and drug release, although the solubility of the drug in the polymer influenced the shape of the release profiles. For the heterogeneous copolymers, 20:80 and 80:20 CPH-SA, individual monomer release kinetics demonstrated the effects of drug partitioning within a phase-separated microstructure. The PNA molecules partition preferentially into the CPH microdomains in the 20:80 CPH-SA copolymer while the DY molecules partition preferentially into the SA microdomains in the 80:20 CPH-SA copolymer. These studies suggest that the drug release mechanism is driven by polymer microstructure, compatibility of the drug with the constituent polymer phases, and solubility of the drug within the polymer. A thorough understanding of drug-polymer interactions as well as the polymer microstructure will pave the way for more accurate predictions of drug release from bioerodible polyanhydrides.

Aniline Compounds↗

PubMed2002

Design of an injectable system based on bioerodible polyanhydride microspheres for sustained drug delivery.

The fabrication, morphological characterization, and drug release kinetics from microspheres of three bioerodible polyanhydrides, poly[1,6-bis(p-carboxyphenoxy)hexane] (poly(CPH)), poly(sebacic anhydride) (poly(SA)), and the copolymer poly(CPH-co-SA) 50:50 (CPH:SA 50:50) is reported. The fabrication technique yields microspheres with different morphologies for each of the three polymers studied, ranging from very smooth exterior surfaces for poly(CPH) to coarse surface roughness with large pores for poly(SA). Release profiles for the model drug, p-nitroaniline are also different for each polymer. The release profile from poly(CPH) has a large initial burst and shows little additional release after 2 days. The release from poly(SA) is nearly zero-order and lasts for about 8 days. The release profile from CPH:SA 50:50 shows a relatively small burst and then exhibits zero-order release for about I month. The different release profiles are attributed to both polymer erosion rates and drug distribution characteristics of the microspheres. Tailored release profiles of a burst followed by zero-order release are obtained by appropriately combining the microspheres. This technique enables independent modulation of both the burst and the zero-order release rate by varying the number of poly(CPH) and poly(SA) microspheres respectively. Additionally, the zero-order release can be extended from about a week to a month by including CPH:SA 50:50 microspheres.

Anhydrides↗

PubMedDate not supplied

Problem-based learning biotechnology courses in chemical engineering.

We have developed a series of upper undergraduate/graduate lecture and laboratory courses on biotechnological topics to supplement existing biochemical engineering, bioseparations, and biomedical engineering lecture courses. The laboratory courses are based on problem-based learning techniques, featuring two- and three-person teams, journaling, and performance rubrics for guidance and assessment. Participants initially have found them to be difficult, since they had little experience with problem-based learning. To increase enrollment, we are combining the laboratory courses into 2-credit groupings and allowing students to substitute one of them for the second of our 2-credit chemical engineering unit operations laboratory courses.

Biotechnology↗

PubMedDate not supplied

Parallel synthesis and high throughput dissolution testing of biodegradable polyanhydride copolymers.

We have demonstrated that polycondensation reactions can be carried out in a combinatorial fashion and that the polymer library can be screened at high throughput using a rapid prototyping technique to fabricate multiwell substrates. A linearly varying compositional library of 100 different biodegradable polyanhydride random copolymers that are promising carriers for controlled drug delivery was designed, fabricated, and characterized by IR microscopy within a few hours. The polyanhydride copolymer library was based on 1,6-bis(p-carboxyphenoxy)hexane (CPH) and sebacic anhydride (SA) and was characterized with infrared microspectroscopy to determine the composition within each well. Since degradation and release rates depend on copolymer composition, we also developed new high-throughput methods to investigate drug release from this library of copolymers by designing specific wells for each task. A subset of this library was chosen, and a substrate was designed and fabricated to enable the synthesis and monitoring of dye dissolution from a range of polyanhydride copolymers in a parallel fashion using a CCD camera. Multisample substrates were fabricated with a novel rapid prototyping method that consists of an organic solvent-resistant array of 10 x 10 microwells of 2-muL volume each. The libraries were deposited with a custom-built liquid dispensing system consisting of a series of computer-controlled volume-dispensing pumps and XYZ motion stages. The parallel dye dissolution study displayed a decreasing rate of release with increasing CPH content. This result agrees with previously published data for dye release from poly(CPH-co-SA) copolymers. The methodology described in this work is amenable to numerous applications in the arenas of high-throughput polymer synthesis and characterization.

Biodegradation, Environmental↗