Biomedical subjects
Publications and source records attributed to Benjamin L Miller.
The first example of a designed receptor containing a cis-1,3-disubstituted cyclobutane ring has been synthesized. This molecule binds diphosphoryl lipid A (a conserved portion of the Gram-(-) bacterial cell membrane, and the causative agent of septic shock) with an affinity comparable to previously described ter-cycloalkane based lipid A-binding compounds.
Arrayed imaging reflectometry (AIR) is a newly developed label-free optical biosensing technique based on the creation and perturbation of a condition of zero reflectance on a silicon substrate. The antireflective coating is formed by covalently immobilizing arrayed probes on a silicon dioxide film. Probe-target complex formation causes a localized increase in optical thickness and a measurable reflectance change. To evaluate the performance of AIR, we have employed two proteins, intimin and tir, from enteropathogenic E. coli that are critical to the bacterium's mechanism of host infection. Using substrates functionalized with the intimin-binding domain of tir, we demonstrate detection of the extracellular domain of intimin at concentrations as low as 10 pM. Through the use of a diffusion-limited model for the intimin-tir binding interaction at this concentration, we estimate the detected intimin surface concentration to be 0.33 pg/mm2.
[reaction: see text] Dynamic combinatorial chemistry (DCC) is a promising technique for receptor-aided selection of high-affinity ligands from equilibrating combinatorial libraries. Identification of the specific ligand(s) selected is often challenging, however, due to difficulties associated with chromatographic separation and/or mass degeneracy within the library. Herein, we describe proof-of-concept experiments demonstrating a new technique termed resin-bound DCC (RB-DCC), which provides a solution to this problem.
Molecules with conditional (switchable) properties are of considerable fundamental interest and are potentially useful for a broad range of applications, including chemical sensing. We have prepared a novel receptor, derived from the peracylation of cyclohexane 1,3,5-trimethanol with tyrosine, that suggests that the phenol-amine hydrogen bond may be an effective structural tool in the preparation of molecules with pH-switchable conformations. This conclusion is based on several key observations. First, the proton longitudinal relaxation rates for this molecule change in a pH-dependent fashion, while those for closely related structures do not. Second, NOESY spectra for the receptor change markedly depending on pH, with the spectrum acquired at pH 9.5 displaying NOEs consistent with the calculated "closed" conformation. Third, this molecule serves as a receptor for anions and cations in aqueous solution at high pH, but not at low pH, as demonstrated by UV-vis titrations and isothermal titration calorimetry (ITC).
Ubiquitin-conjugating enzymes (E2s or Ubcs) are essential components in the ubiquitination apparatus. These enzymes accept ubiquitin from an E1 enzyme and then, usually with the aid of an E3 enzyme, donate the ubiquitin to the target protein. The function of E2 relies critically on the chemistry of its active site cysteine residue since this residue must form a thioester bond with the carboxyl terminus of ubiquitin. Despite the plethora of structural information that is available, there has been a notable dearth of information regarding the chemical basis of E2 function. Toward filling this large void in our understanding of E2 function, we have examined the pK(a) of the active site cysteine using a combination of experimental and theoretical approaches. We find, remarkably, that the pK(a) of the active site cysteine residue is elevated by approximately 2 pH units above that of a free cysteine. We have identified residues that contribute to the increase in this pK(a). On the basis of experimental values obtained with three different E2 proteins, we believe this to be a general and important characteristic of E2 protein chemistry. Sequence comparison suggests that the electrostatic environment is maintained not through strict residue conservation but through different combinations of residues near the active site. We propose that the elevated pK(a) is a regulatory mechanism that prevents the highly exposed cysteine residue in free E2 from reacting promiscuously with electron deficient chemical moieties in the cell.
The study of proteins and the molecules with which they interact on an organismwide scale is critical to understanding basic biology, and understanding and improving human health. New platform technologies allowing label-free, quantitative array-based analysis of proteins are particularly desirable. We have developed an analytical technology, reflective interferometry (RI), which provides specific, rapid, and label-free optical detection of biomolecules in complex mixtures. In order to evaluate the suitability of RI for proteomics, we have prepared a series of arrays bearing the extracellular domain of the secreted enteropathogenic Escherichia coli (EPEC) protein Translocated Intimin Receptor (Tir). These arrays are able to selectively detect the extracellular domain of the protein Intimin, Tir's natural binding partner. Furthermore, we demonstrate the use of RI and Tir-functionalized arrays for the selective detection of EPEC directly from culture.
The separate developments of microarray patterning of DNA oligonucleotides, and of DNA hairpins as sensitive probes for oligonucleotide identification in solution, have had a tremendous impact on basic biological research and clinical applications. We have combined these two approaches to develop arrayable and label-free biological sensors based on fluorescence unquenching of DNA hairpins immobilized on metal surfaces. The thermodynamic and kinetic response of these sensors, and the factors important in hybridization efficiency, were investigated. Hybridization efficiency was found to be sensitive to hairpin secondary structure, as well as to the surface distribution of DNA hairpins on the substrate. The identity of the bases used in the hairpin stem as well as the overall loop length significantly affected sensitivity and selectivity. Surface-immobilized hairpins discriminated between two sequences with a single base-pair mismatch with high sensitivity (over an order of magnitude difference in signal) under identical assay conditions (no change in stringency). This represents a significant improvement over other microarray-based techniques.
Porous silicon multilayer structures have remarkable optical and morphological properties that can be exploited for biosensing. In particular, a high internal surface area (>100 m(2)/cm(3)) and a linear response profile to changes in the dielectric environment enable fabrication of sensitive devices and a straightforward quantitation of the optical response. These essential operating characteristics are illustrated for p+ mesoporous silicon (pore diameter 15-20 nm) optical microcavities. A series of devices were prepared to permit the immobilization of glutathione-S-transferase ( approximately 50 kDa) within the porous matrix. Enzyme activity was exploited as an indirect means to quantitate the amount of protein immobilized. Activity was positively correlated with the optical sensor response. However, at high enzyme load the activity becomes nonlinear while the microcavity response remains linear. These data were used to determine the transduction limit (minimum amount of protein required to transduce an optical response), which is reported as areal mass sensitivity ranging between 50 and 250 pg/mm(2). This value is considered in context with the dynamic range of the bulk sensitivity, defined as the magnitude of the wavelength shift per refractive index unit, which was measured as a function of microcavity design parameters. This work has uncovered key parameters that can be tuned to improve the detection limit of this sensor modality. Because of the ever increasing number of emerging new biosensor technologies, defining sensor detection limits has become an ambiguous topic and a need exists to standardize measurements and sensitivity units. For chip-based devices, it seems appropriate to report sensitivity in terms of the minimum number of grams of bound target per surface area.
Porous silicon matrixes are attractive materials for the construction of biosensors and may also have utility for the production of immobilized enzyme bioreactors. In an effort to gain a quantitative understanding of the effects of immobilization on enzyme activity, we compared the activity of glutathione-S-transferase immobilized in electrochemically etched porous silicon films (approximately 6.5 microm thick) with the enzyme in solution. Kinetic measurements were made by varying the glutathione concentration while maintaining a fixed saturating concentration of 1-chloro-2,4-dinitrobenzene. The reaction kinetics follow steady-state equilibrium behavior. The specific activity of the free enzyme in solution is approximately 4x higher than the immobilized enzyme, for which we measured an apparent K'(m)(GSH) value of 1.0 +/- 0.3. The maximum velocity, V'(max), is linearly proportional to immobilized enzyme concentration, but the magnitude is approximately 20 times lower than that in solution. Results suggest approximately 25% of the enzyme is bound with the catalytic site in an inactive conformation or in a hindered orientation. Finally, the effects of hydration and exposure to denaturants on the immobilized enzyme activity are presented.
Olefin cross-metathesis (CM) is potentially an attractive method for generating dynamic combinatorial libraries (DCLs). In order for the CM reaction to be useful for DCL production, the course of the reaction and product distribution must be relatively insensitive to functionality remote from the reacting centers. We report on the CM of a series of allyl- and homoallylamides that are strongly dependent on remote functionality. This includes an unusual example of a cis-selective CM. [Reaction: see text]
Major advances in science and technology are converging to enable the development of a broad range of diagnostic aids for use in the home. These range from devices designed to diagnose infectious disease, to real-time continuous monitoring of endogenous biomarkers for cancer, cardiovascular health, and the like. This chapter briefly reviews some of the technical, biological, and social challenges associated with home diagnostic aids. In addition to providing several scenarios of how such devices might be used, we describe our own efforts in this area.
Immobilized enzyme systems are important in a broad range of applications, from biological sensing to the industrial-scale biocatalytic synthesis of chiral products. We demonstrate the ability to systematically vary and quantitatively assess the immobilization capacity of porous silicon thin films for the enzyme glutathione-S-transferase in a manner predicted by a simple geometric model of the porous silicon matrix. We find that the immobilization capacity quantatitively correlates with systematic changes in the device thickness. These results are significant since, despite the wide range over which porous silicon morphology and surface area can be varied, few attempts have been made to systematically characterize surface binding capacity. Our findings suggest that porous silicon can be an ideal matrix, where immobilization of a predictable quantity of biological material is desired.
Knowledge of the acid dissociation constant (pKa) of a molecule is a critical step toward understanding its structure and reactivity. Current methods for pKa measurement, including electrochemical, spectroscopic, and spectrophotometric titrations, have proven to be useful but also have significant limitations. To overcome these limitations, we report the use of isothermal titration calorimetry (ITC) as a new method for pKa determination. We demonstrate by the measurement of the pKa values for free cysteine, glutathione, and a cysteine residue in a protein that this method is rapid and accurate.
New chip-based methods for the detection of unmodified biomolecular targets have significant potential as enabling technology in fundamental biology and biomedical analysis. We report a method based on changes in reflectivity from specially fabricated substrates that is capable of detecting the binding of as little as an average of 0.2 nm (i.e., a fraction of a monolayer) of biomolecules. We demonstrate the method on detection of femtomole quantities of untagged oligonucleotides in an array format, showing that the amount of target bound can be determined quantitatively. The simplicity of the approach promises to make it broadly applicable for any biomolecule for which suitable molecular recognition chemistry is available.
[reaction: see text] The Friedländer synthesis of quinolines is an extensively employed protocol, yielding the desired heterocycle in a two-step reduction-condensation sequence. We have developed a mild, efficient, high-yielding single-step variant of this methodology, which employs SnCl(2) and ZnCl(2) to effect the reaction.
There is a keen interest in developing techniques for rapid genetic analysis that do not require labeling of an analyte. Here we demonstrate that fluorophore-tagged DNA hairpins attached to gold films can function as immobilized "molecular beacons". Two DNA hairpins incorporating portions of the Staphlococcus aureus FemA and mecR methicillin-resistance genes were attached to a gold substrate. Upon exposure to the complement, a approximately 26-fold increase in fluorescence intensity was measured corresponding to a 96 +/- 5% quenching efficiency. Studies with nonspecific DNA indicate that DNA hairpins immobilized on a gold surface retain their ability to bind complementary DNA sequences selectively.