PubMed Health⌕ Search

Biomedical subjects

Bi-Xian Mai

Publications and source records attributed to Bi-Xian Mai.

10 recordsLinked to original sources

Predicting organic contaminant concentrations in sediment porewater using solid-phase microextraction.

Because of its cost and time saving features, solid-phase microextraction (SPME) is a leading candidate as a biomimic technique in assessing the bioavailable fraction of hydrophobic organic contaminants (HOCs) in sediment porewater. However, no predictive modeling framework in which to systematically address the effect of key parameters on SPME performance for this application exists. In this study, we derived two governing equations to predict (1) the minimum sediment volume (V(s)min) required to achieve non-depletive conditions, and (2) dissolved phase HOC porewater concentrations (C(pw)) as functions of HOC- and sediment specific characteristics in a conceptual three compartment system. The resulting model predicted that V(s)min was independent of HOC concentrations both in sediment and porewater, but did vary with hydrophobicity (characterized by logK(ow)), the fraction of sediment porewater (f(pw)), and the volume (V(f)) of the SPME sorbent phase. Moreover, the effects of these parameters were minimized (i.e., V(s)min reached plateaus) as logK(ow) approached 4-5. Model predictions of C(pw), a surrogate for SPME-based detection limits in porewater, decreased with increasing sediment volume (V(s)) at low V(s) values, but rapidly leveled off as V(s) increased. A third result suggested that the sediment HOC concentration required for SPME is completely independent of K(ow). These results suggest that relatively small sediment volumes participate in exchange equilibria among sediment, porewater and the SPME fiber, and that large sediment HOC reservoirs are not needed to improve the detection sensitivity of SPME-based porewater samplers. The ultimate utility of this modeling framework will be to assist future experimental designs and help predict in situ bioavailability of sediment-associated HOCs.

Algorithms↗

A numerical scheme to diagnose interferences in gas chromatography-mass spectrometry quantitation of coeluting isotopically labeled and unlabeled counterparts with partially overlapping ion profiles.

Quantitation of chromatographically coeluting compounds with partially overlapping mass profiles is a challenging task, especially if only a low-resolution mass spectrometer is available. To examine whether theoretical predictions can be utilized to determine the appropriate concentration ranges of the coeluting compounds that satisfy the non-interfering condition, we utilized an algorithm based upon a two-component model to compare the experimentally measured and predicted quantitation errors. Selected unlabeled and 13C-labeled polychlorinated biphenyl (PCB) congeners were investigated as model compounds. Standard solutions containing various concentration ratios of the unlabeled and 13C-labeled PCB congeners were analyzed, and the data were used to compare with theoretical predictions derived from the chlorine isotopic distributions (35Cl and 37Cl). Good agreements between experimental predictions and theoretical predictions were found on the magnitude of interferences for quantitation of 13C-labeled PCB congeners, as well as on the variability of the quantitation errors with the concentration ratio of 13C-labeled and unlabeled PCB counterparts. In addition, the magnitude of interferences considered in the present study was highly dependent upon the number of coexisting ions included for quantitation and their relative abundances in the mass spectrum. All these results suggest that the magnitude of interferences in quantifying a pair of coeluting compounds with partially overlapping mass spectral profiles can be effectively determined and minimized by carefully selecting the concentration ratio of the coeluting compounds and/or the number of quantitation ions. Finally, the selection of the experimental parameters to satisfy the non-interfering condition can be made purely on the basis of theoretical considerations.

Chromatography, Thin Layer↗

Polybrominated diphenyl ethers in surface sediments of the Yangtze River Delta: Levels, distribution and potential hydrodynamic influence.

A total of 32 surface sediments collected from the Yangtze River Estuary, Hangzhou Bay and the Qiantang River were analyzed for polybrominated diphenyl ethers (PBDEs). The concentrations of summation operatorPBDEs (sum of 12 PBDE congeners without BDE 209) and BDE 209 varied from n.d. to 0.55 and from 0.16 to 94.6 ng/g, respectively. The spatial variability of summation operatorPBDEs concentrations indicated that waste discharge from the urban areas might been the main source of PBDEs in the Yangtze River Delta. BDE 209 was the predominant congener (approximately 90-100%) detected among the 13 congeners, consistent with the fact that technical deca-BDE mixtures are presently the dominant technical PBDE mixtures used in China. Compared to published data acquired from other locales, PBDE congeners with less than four bromines were more abundant in the present study area. The hydrodynamic conditions may likely be a significant factor in dictating the observed levels and congener distribution patterns of PBDEs.

China↗

Application of a static solid-phase microextraction procedure combined with liquid-liquid extraction to determine poly(dimethyl)siloxane-water partition coefficients for selected polychlorinated biphenyls.

A static solid-phase microextraction (SPME) procedure combined with liquid-liquid extraction (LLE) was used to determine the poly(dimethyl)siloxane (PDMS)-water partition coefficients (K(f)) for selected polychlorinated biphenyl congeners (PCBs), including PCB 1, 15, 28, 47, 101, 153, 180, 202, 206, and 209. The accuracy for the measurements of analyte concentrations in the aqueous phase was ensured with a one-to-one recovery correction strategy employing one 13C-labeled PCB congener as a surrogate standard for each unlabeled PCB counterpart. The effects of coating thickness (7, 30, and 100 microm) and sample volume (130 mL and 2 L) on the K(f) values were examined experimentally and confirmed with paired t-tests. Significant dependence of K(f) values on coating thickness was found for a few heavily chlorinated congeners only, and was tentatively attributed to the use of the inaccurate effective coating volumes and the structural variation with these PDMS coatings. In addition, no significant differences in the log K(f) values of all analytes except for PCB 206 were found between the sample sizes of 130 mL and 2 L for both the 7- and 100-microm coatings. Overall, K(f) values obtained with 2-L sample containers were consistently higher than those reported in the literature, which is attributable to the selection of appropriate equilibrium times for SPME and direct measurements of aqueous analyte concentrations with LLE in the present study.

Dimethylpolysiloxanes↗

Concentration levels, compositional profiles, and gas-particle partitioning of polybrominated diphenyl ethers in the atmosphere of an urban city in South China.

Air samples were collected in June of 2004 from four sites in the city of Guangzhou, a typical urban center in South China, to determine the levels, compositional profiles, and gas-particle distribution of 11 polybrominated diphenyl ether (PBDE) congeners (BDE-28, -47, -66, -100, -99, -85, -154, -153, -138, -183, and -209). The arithmetic mean atmospheric concentrations of sigmaPBDEs (sum of all target PBDE congeners except for BDE-209) in samples from the urban and city background sites were comparable to or slightly higher than those from other places around the world. The arithmetic mean atmospheric concentrations of BDE-209, however, were higherthan those in North America and Europe, and similar to the values from Japan. Congener compositions were dominated by BDE-209 in all (>70%) but an industrial site, with an average abundance of 48% for BDE-209. The PBDE patterns were generally similar to that in the technical penta-BDE mixture, Bromkal 70-5DE. Partitioning of PBDEs between the gas and particle phases (Kp) was well correlated with the subcooled liquid vapor pressure (PLO) for all of the samples, but the relationship differed between samples from different sites. The measured fractions of PBDEs in the particulate phase were compared to the predictions from the Junge-Pankow adsorption and KOA-based absorption models. The results indicated that the KOA-based model worked better than the Junge-Pankow model that tended to overestimate the particulate fractions for most PBDE congeners.

Adsorption↗

Polybrominated diphenyl ethers in airborne particulates collected during a research expedition from the Bohai Sea to the Arctic.

In July to September 2003, particulates in the oceanic atmosphere from the Bohai Sea to the high Arctic (37 degrees N to 80 degrees N) were collected aboard a research expedition icebreaker, Xuelong (Snow Dragon), under the 2003 Chinese Arctic Research Expedition Program (CHINARE 2003). These samples were analyzed to elucidate the atmospheric distributions of polybrominated diphenyl ethers (PBDEs) in the North Pacific Ocean and adjacent Arctic region. The levels of 11 PBDE congeners (BDE-28, -47, -66, -100, -99, -85, -154, -153, -138, -183, and -209; the sum was defined as sigma11PBDE) in the oceanic atmosphere of Far East Asia (34-48 degrees N/122-148 degrees E) ranged from 2.25 to 198.9 pg/m3 with a mean of 58.3 pg/m3. BDE-47, -99, -100, and -209 were the dominant congeners in all the samples, suggesting that the widely used commercial penta- and deca-BDE products were the original sources. The PBDE levels exhibited a decreasing trend from the mid- to high-latitudinal regions of the North Pacific Ocean, probably resulting from dilution, deposition, and decomposition of PBDEs during long-range transport of air masses. On the other hand, no apparent geographical pattern of PBDE distribution was observed within the Arctic, attributable to unstable air circulation and strong air mixing. Correlations among the PBDE congeners suggested that air masses collected from the North Pacific Ocean were relatively fresh, whereas those from the Arctic were aged as a result of photodecompoisiton. The higher average level (17.3 pg/m3) of PBDE congeners in the Arctic than those in the adjacent North Pacific Ocean (12.8 pg/m3) or other remote areas reported in the literature was attributed to the impact of the North American continent and temperature effects, which was consistent with the hypotheses of global fractionation.

Air Movements↗

Polycyclic aromatic hydrocarbons in suspended particulate matter and sediments from the Pearl River Estuary and adjacent coastal areas, China.

The spatial distribution, composition, and sources of polycyclic aromatic hydrocarbons (PAHs) in sediments and suspended particulate matter (SPM) from the Pearl River Estuary and adjacent coastal areas were examined. Total PAH concentrations varied from 189 to 637 ng/g in sediments and 422 to 1,850 ng/g in SPM. PAHs were dominated by 5,6-ring compounds in sediments and by 2,3-ring compounds in SPM samples. Assessment of PAH sources suggested that biomass and coal combustion is the major PAH source to the outer part of the estuary sediments and that petroleum combustion is the major PAH source to the inner part of estuary sediments. As for SPM samples, PAH isomer pair ratios indicated multiple (petroleum, petroleum combustion, and biomass and coal combustion) PAH sources, and significant temporal variations could exist for the sources of water column PAHs in the study area. The distribution of perylene in SPM samples indicated that the river was the dominant source of perylene in SPM and that perylene could be taken as an index to assess the contribution of river inflow to the total PAHs in SPM samples. The high concentration of perylene in the sediment was indicative of an in situ biogenic origin.

Biomass↗

[Distribution and sources of polycyclic aromatic hydrocarbons in sediments from rivers of Pearl River Delta and its nearby South China Sea].

Polycyclic aromatic hydrocarbons (PAHs) are measured in surface sediments from rivers and estuary of Pearl River Delta and its nearby South China Sea. Total PAH concentration varied from 255.9 - 16 670.3 ng/g and a moderate to low level compare to relevant areas worldwide. The order of PAHs concentration in sediments was: rivers of Pearl River Delta > estuary > South China Sea, and the most significant PAH contamination was at Guangzhou channel of Zhujiang river. A decrease trend for PAHs concentration with distance from estuary to open sea can be sees in South China Sea. Coal and biomass combustion is the major source of PAHs in nearshore of South China Sea, and petroleum combustion is the main source of pyrolytic PAHs in rivers and estuary of Pearl River Delta according to PAHs diagnostic ratios. Petroleum PAHs are revealed have a high contribution to PAHs in Xijiang River, estuary and some stations in Zhujiang River. A comparison of data from study in 1997 with data from present study indicates that there is no clear change in the PAH concentration over time but the source of PAHs in Pearl River Delta have been change from a main coal combustion to petroleum combustion and being reflect in the sediments in rivers and estuary of Pearl River Delta where there have high sedimentation rate.

China↗

Chlorinated and polycyclic aromatic hydrocarbons in riverine and estuarine sediments from Pearl River Delta, China.

Spatial distribution of chlorinated hydrocarbons [chlorinated pesticides (CPs) and polychlorinated biphenyls (PCBs)] and polycyclic aromatic hydrocarbons (PAHs) was measured in riverine and estuarine sediment samples from Pearl River Delta, China, collected in 1997. Concentrations of CPs of the riverine sediment samples range from 12 to 158 ng/g, dry weight, while those of PCBs range from 11 to 486 ng/g. The CPs concentrations of the estuarine sediment samples are in the range 6-1658 ng/g, while concentrations of PCBs are in the range 10-339 ng/g. Total PAH concentration ranges from 1168 to 21,329 ng/g in the riverine sediment samples, whereas the PAH concentration ranges from 323 to 14,812 ng/g in the sediment samples of the Estuary. Sediment samples of the Zhujiang River and Macao harbor around the Estuary show the highest concentrations of CPs, PCBs, and PAHs. Possible factors affecting the distribution patterns are also discussed based on the usage history of the chemicals, hydrologic condition, and land erosion due to urbanization processes. The composition of PAHs is investigated and used to assess petrogenic, combustion and naturally derived PAHs of the sediment samples of the Pearl River Delta. In addition, the concentrations of a number of organic compounds of the Pearl River Delta samples indicate that sediments of the Zhujiang river and Macao harbor are most likely to pose biological impairment.

Carbon↗