PubMed Health⌕ Search

Biomedical subjects

Brian Cannon

Publications and source records attributed to Brian Cannon.

7 recordsLinked to original sources

Lipid headgroup superlattice modulates the activity of surface-acting cholesterol oxidase in ternary phospholipid/cholesterol bilayers.

The relationship between the molecular organization of lipid headgroups and the activity of surface-acting enzyme was examined using a bacterial cholesterol oxidase (COD) as a model. The initial rate of cholesterol oxidation by COD in fluid state 1-palmitoyl-2-oleoyl-phosphatidylethanolamine/1-palmitoyl-2-oleoyl-phosphatidylcholine/cholesterol (POPE/POPC/CHOL) bilayers was measured as a function of POPE-to-phospholipid mole ratio (X(PE)) and cholesterol-to-lipid mole ratio (X(CHOL)) at 37 degrees C. At X(PE) = 0, the COD activity changed abruptly at X(CHOL) approximately 0.40, whereas major activity peaks were detected at X(PE) approximately 0.18, 0.32, 0.50, 0.64, and 0.73 when X(CHOL) was fixed to 0.33 or 0.40. At a fixed X(CHOL) of 0.50, the COD activity increased progressively with PE content and exhibited small peaks or kinks at X(PE) approximately 0.40, 0.50, 0.58, 0.69, and 0.81. When X(PE) and X(CHOL) were systematically varied within a narrow 2-D lipid composition window, an onset of COD activity at X(CHOL) approximately 0.40 and the elimination of the activity peak at X(PE) approximately 0.64 for X(CHOL) >0.40 were clearly observed. Except for X(PE) approximately 0.40 and 0.58, the observed critical PE mole ratios agree closely (+/-0.03) with those predicted by a headgroup superlattice model (Virtanen, J.A., et al. (1998) Proc. Natl. Acad. Sci. U.S.A. 95, 4964-4969; Cannon, B., et al. (2006) J. Phys. Chem. B 110, 6339-6350), which proposes that lipids with headgroups of different sizes tend to adopt regular, superlattice-like distributions at discrete and predictable compositions in fluid lipid bilayers. Our results indicate that headgroup superlattice domains exist in lipid bilayers and that they may play a crucial role in modulating the activity of enzymes acting on the cell membrane surface.

Cholesterol↗

Cholesterol supports headgroup superlattice domain formation in fluid phospholipid/cholesterol bilayers.

Fluorescence and Fourier transform infrared (FTIR) spectroscopic techniques were used to explore the effect of added cholesterol on the composition-dependent formation of putative phospholipid headgroup superlattices in fluid 1-palmitoyl-2-oleoyl-phosphatidylethanolamine/1-palmitoyl-2-oleoyl-phosphatidylcholine/cholesterol (POPE/POPC/CHOL) bilayers. Steady-state fluorescence anisotropy measurements of diphenylhexatriene (DPH) chain-labeled phosphatidylcholine (DPH-PC) revealed significant dips at several POPE-to-phospholipid mole fractions (X(PE)'s) when the cholesterol-to-lipid mole fraction (X(CHOL)) was fixed at 0.00, 0.35, 0.40, and 0.50. Most of the observed dips occur at or close to critical X(PE)'s predicted by the Headgroup Superlattice (SL) model, suggesting that phospholipid headgroups of different structures tend to adopt regular distributions even in the presence of cholesterol. Time-resolved fluorescence anisotropy measurements revealed that DPH-PC senses a disordered and highly mobile microenvironment in the POPE/POPC/CHOL bilayers at those critical X(PE)'s, indicating that this probe may partition to defect regions in the bilayers. The presence of coexisting packing defect regions and regularly distributed SL domains is a key feature predicted by the Headgroup SL model. Importantly, probe-free FTIR measurements of acyl chain C-H, interfacial carbonyl, and headgroup phosphate stretching peak frequencies revealed the presence of abrupt changes at X(PE)'s close to those observed in the fluorescence data. When X(PE) was varied from 0.60 to 0.72 and X(CHOL) from 0.34 to 0.46, a clear dip at the lipid composition coordinates (X(PE), X(CHOL)) approximately (0.68, 0.40) was observed in the three-dimensional surface plots of DPH-PC anisotropy as well as the carbonyl and phosphate stretching frequencies. The critical X(CHOL) at 0.40 agrees with the Cholesterol SL model, which assumes that cholesterol and phospholipid form SL domains at the lipid acyl chain level. In conclusion, this study provides evidence that cholesterol supports formation of phospholipid headgroup SLs in fluid state ternary lipid bilayers. The feasibility of the parallel existence of SLs at the lipid headgroup and acyl chain levels supports the relevance of the lipid SL model for the membranes of eukaryotic cells that typically contain significant amounts of cholesterol. We speculate that lipid SL formation may play a central role in the regulation of membrane lipid compositions, maintenance of organelle boundaries, and other crucial phenomena in those cells.

Cholesterol↗

Cholesterol modulated antibody binding in supported lipid membranes as determined by total internal reflectance microscopy on a microfabricated high-throughput glass chip.

A high-throughput microfabricated all-glass microchip, lipid biochip, was created and used to measure fluorescently tagged antibody binding to dinitrophenol (DNP) haptens in planar supported phospholipid/cholesterol lipid bilayers as a function of cholesterol-to-lipid molar ratio (X(CHOL)). Multiple parallel microchannels etched in the lipid biochip allowed simultaneous measurement of antibody binding to hapten-containing and hapten-free lipid bilayers, for a range of aqueous antibody concentrations. Specific and nonspecific antibody binding to the supported lipid bilayers was determined from the internally calibrated intensity of the surface fluorescence using total internal reflectance fluorescence (TIRF) microscopy. The TIRF intensity data of the specific antibody binding were fitted to the Langmuir isotherm and Hill equation models to determine the apparent dissociation constant K(d), the maximum fluorescence parameter F(infinity), and binding cooperativity n. As X(CHOL) increased from 0 to 0.50, K(d) exhibited a minimum of approximately 4 microM and n reached a maximum of approximately 2.2 at X(CHOL) approximately 0.20. However, F(infinity) appeared to be insensitive to the cholesterol content. The nonspecific binding fraction (NS), defined as the ratio of the TIRF intensity for hapten-free bilayers to that with hapten, showed a minimum of approximately 0.08 also at X(CHOL) approximately 0.20. The results suggest that cholesterol regulates the specific binding affinity and cooperativity, as well as suppresses nonspecific binding of aqueous antibody to a planar supported lipid bilayer surface at an optimal cholesterol content of X(CHOL) approximately 0.20. Interestingly, for X(CHOL) approximately 0.40, NS reached a maximum of approximately 0.57, suggesting significant packing defects in the lipid bilayer surface, possibly as a result of lipid domain formation as predicted by the lipid superlattice model. We conclude that cholesterol plays a significant role in regulating both specific and nonspecific antibody/antigen binding events on the lipid bilayer surface and that our lipid biochip represents a new and useful high-resolution microfluidic device for measuring lipid/protein surface binding activities in a parallel and high-throughput fashion.

Binding Sites, Antibody↗

Regulation of calcium channel activity by lipid domain formation in planar lipid bilayers.

The sarcoplasmic reticulum channel (ryanodine receptor) from cardiac myocytes was reconstituted into planar lipid bilayers consisting of 1-palmitoyl-2-oleoyl-phosphatidylethanolamine (POPE) and 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) in varying ratios. The channel activity parameters, i.e., open probability and average open time and its resolved short and long components, were determined as a function of POPE mole fraction (X(PE)) at 22.4 degrees C. Interestingly, all of these parameters exhibited a narrow and pronounced peak at X(PE) approximately 0.80. Differential scanning calorimetric measurements on POPE/POPC liposomes with increasing X(PE) indicated that the lipid bilayer enters a composition-driven transition from the liquid-crystalline state to the gel state at 22.4 degrees C when X(PE) approaches 0.80. Thus, the peaking of the reconstituted channel activity at X(PE) approximately 0.80 in the planar bilayer could result from the appearance of gel/liquid-crystalline domain boundaries at this POPE content. Lipid packing at domain boundaries is known to be looser as compared to the homogenous gel or liquid-crystalline state. We propose that the attractive potential of packing defects at lipid domain boundaries and entropic excluded-volume effects could result in the direct interactions of the transmembrane region of the channel protein with the lipid-packing defects at the lipid/protein interface, which could thus provide a favorable environment for the open state of the protein. The present findings indicate that the activity of the sarcoplasmic reticulum calcium channel could be modulated by lipid domain formation upon slight changes in membrane lipid composition in vivo.

Calcium Channels↗

Time-resolved fluorescence and fourier transform infrared spectroscopic investigations of lateral packing defects and superlattice domains in compositionally uniform cholesterol/phosphatidylcholine bilayers.

Time-resolved fluorescence and Fourier transform infrared spectroscopies were used to investigate the lateral organization of lipids in compositionally uniform and fully equilibrated 1-palmitoyl-2-oleoyl-phosphatidylcholine/cholesterol (POPC/CHOL) liposomes prepared by a recently devised low-temperature trapping method. Independent fluorescence decay lifetime and rotational dynamics parameters of diphenylhexatriene (DPH) chain-labeled phosphatidylcholine (DPH-PC) in these liposomes were recovered from the time-resolved fluorescence measurements as a function of cholesterol molar fraction (X(CHOL)) at 23 degrees C. The results indicate significantly greater lifetime heterogeneity, shorter average lifetime, rotational correlation time, and lower order parameter of the DPH moiety at X(CHOL) approximately 0.40 and 0.50 as compared to the adjacent cholesterol concentrations. Less prominent changes were also detected at, for example, X(CHOL) approximately 0.20 and 0.33. These X(CHOL)'s coincide with the "critical" X(CHOL)'s predicted by the previously proposed superlattice (SL) model, thus indicating that POPC and cholesterol molecules tend to form SL domains where the components tend to be regularly distributed. The data also support another prediction of the SL model, namely that lateral packing defects coexist with the ordered SL domains. It appears that unfavorable interaction of the DPH-moiety of DPH-PC with cholesterol results in a preferential partition of DPH-PC to the defect regions. Fourier transform infrared analysis of the native lipid O=P=O, C=O, and C-H vibrational bands of POPC/CHOL liposomes in the absence of DPH-PC revealed an increase in the conformational order of the acyl chains and a decrease in the conformational order (or increased hydration) of the interfacial and headgroup regions at or close to the predicted critical X(CHOL)'s. This provides additional but probe-independent evidence for SL domain formations in the POPC/CHOL bilayers. We propose that the defect regions surrounding the putative SL domains could play an important role in modulating the activity of various membrane-associated enzymes, e.g., those regulating the lipid compositions of cell membranes.

Algorithms↗

A conserved signal-responsive sequence mediates activation-induced alternative splicing of CD45.

Alternative splicing of nascent transcripts is a widespread mechanism for altering protein expression in response to extracellular stimuli. However, little is known about the sequences that mediate signal-induced alternative splicing, complicating efforts to identify genes whose splicing may be regulated in response to a particular stimuli. Here we define a sequence element that is both the primary determinant of CD45 variable exon exclusion following T cell stimulation by PMA and is sufficient to confer activation-induced skipping of a heterologous exon. Additionally, we show that this regulatory element has homology to sequences in other signal-regulated genes, suggesting that the alternative splicing of large families of genes may be regulated by common signaling pathways.

Alternative Splicing↗

A self consistent normalized calibration protocol for three dimensional magnetic resonance gel dosimetry.

In a clinical setting, mixed and inconsistent results have been reported using Magnetic Resonance Relaxation imaging of irradiated aqueous polymeric gels as a three-dimensional dosimeter, for dose verification of conformal radiation therapy. The problems are attributed to the difficulty of identifying an accurate dose calibration protocol for each delivered gel at the radiation site in a clinical setting. While careful calibration is done at the gel manufacturing site in a controlled laboratory setting, there is no guarantee that the dose sensitivity of the gels remains invariant upon delivery, irradiation, magnetic resonance imaging and storage at the clinical site. In this study, we have compared three different dose calibration protocols on aqueous polymeric gels for a variety of irradiation scenarios done in a clinical setting. After acquiring the three-dimensional proton relaxation maps of the irradiated gels, the dose distributions were generated using the off-site manufacturer provided calibration curve (Cal-1), the on-site external tube gel calibration (Cal-2) and the new on-site internal normalized gel calibration (Cal-3) protocols. These experimental dose distributions were compared with the theoretical dose distributions generated by treatment-planning systems. We observed that the experimental dose distributions generated from the Cal-1 and Cal-2 protocols were off by 10% to 40% and up to 200% above the predicted maximum dose, respectively. On the other hand, the experimental dose distributions generated from the Cal-3 protocol matched reasonably well with the theoretical dose distributions to within 10% difference. Our result suggests that an independent on-site normalized internal calibration must be performed for each batch of gel dosimeters at the time of MR relaxation imaging in order to account for the variations in dose sensitivity caused by various uncontrollable conditions in a clinical setting such as oxygen contamination, temperature changes and shelf life of the delivered gel between manufacturing and MR acquisitions.

Calibration↗