Biomedical subjects

Britt Hedman

Publications and source records attributed to Britt Hedman.

At least 19 recordsLinked to original sources

PubMed2007

Fe L-edge X-ray absorption spectroscopy of low-spin heme relative to non-heme Fe complexes: delocalization of Fe d-electrons into the porphyrin ligand.

Hemes (iron porphyrins) are involved in a range of functions in biology, including electron transfer, small-molecule binding and transport, and O2 activation. The delocalization of the Fe d-electrons into the porphyrin ring and its effect on the redox chemistry and reactivity of these systems has been difficult to study by optical spectroscopies due to the dominant porphyrin pi-->pi(*) transitions, which obscure the metal center. Recently, we have developed a methodology that allows for the interpretation of the multiplet structure of Fe L-edges in terms of differential orbital covalency (i.e., differences in mixing of the d-orbitals with ligand orbitals) using a valence bond configuration interaction (VBCI) model. Applied to low-spin heme systems, this methodology allows experimental determination of the delocalization of the Fe d-electrons into the porphyrin (P) ring in terms of both P-->Fe sigma and pi-donation and Fe-->P pi back-bonding. We find that pi-donation to Fe(III) is much larger than pi back-bonding from Fe(II), indicating that a hole superexchange pathway dominates electron transfer. The implications of the results are also discussed in terms of the differences between heme and non-heme oxygen activation chemistry.

Electrons↗

PubMed2006

Dioxygen reactivity of a copper(I) complex with a N3S thioether chelate; peroxo-dicopper(II) formation including sulfur-ligation.

Employing a tetradentate N3S(thioether) ligand, LN3S, dioxygen reactivity of a copper(I) complex, [(LN3S)CuI]+ (1) was examined. In CH2Cl2, acetone (at -80 degrees C), or 2-methyltetrahydrofuran (at -128 degrees C), 1 reacts with O2 producing the end-on bound peroxodicopper(II) complex [{(LN3S)CuII}2(mu-1,2-O2(2-))]2+ (2), the first reported copper-dioxygen adduct with sulfur (thioether) ligation. Its absorption spectrum contains an additional low-energy feature (but not a Cu-S CT band) compared to the previously well-characterized N4 ligand complex, [{(TMPA)CuII}2(mu-1,2-O2(2-))]2+ (3) (TMPA = tris(2-pyridylmethyl)amine). Resonance Raman spectroscopy confirms the peroxo formulation {nu(O-O) = 817 cm-1 (16-18O2 Delta = 46 cm-1) and nu(Cu-O) = 545 cm-1 (16-18O2 Delta = 26 cm-1), in close analogy to that known for 3 {nu(O-O) = 827 cm-1 and nu(Cu-O) = 561 cm-1}. Direct evidence for thioether ligation comes from EXAFS spectroscopy {Cu K-edge; Cu-S = 2.4 A}.

Acetone↗

PubMed2006

A systematic resolution of sulfur in reticulated vitreous carbon using X-ray absorption spectroscopy.

Sulfur K-edge X-ray absorption spectroscopy (XAS) was used to characterize the approximately 0.1% sulfur found both in native reticulated vitreous carbon (RVC) foam and in RVC oxidatively modified using 0.2 M KMnO4 in 2 M H2SO4. Sulfur valences and functional groups were assessed using K-edge XAS spectral curve-fitting and employing explicit sulfur compounds as models. For native RVC, these were episulfide (approximately 3%), thianthrene (approximately 9%), disulfide (approximately 10%), sulfenate ester (approximately 12%), benzothiophene (approximately 24%), N,N'-thiobisphthalimide (approximately 30%), alkyl sulfonate (approximately 1.2%), alkyl sulfate monoester (approximately 6%), and sulfate dianion (approximately 6%). Permanganate oxidation of RVC diminished sulfenic sulfur to approximately 9%, thianthrenic sulfur to approximately 7%, and sulfate dianion to approximately 1% but increased sulfate monoester to approximately 12%, and newly produced sulfone (approximately 2%) and sulfate diester (approximately 5%). A simple thermodynamic model was derived that allows proportionate functional group comparisons despite differing (approximately +/-15%) total sulfur contents between RVC batches. The limits of accuracy in the XAS curve-fitting analysis are discussed in terms of microenvironments and extended structures in RVC carbon that cannot be exactly modeled by small molecules. Sulfate esters cover approximately 0.15% of the RVC surface, increasing to approximately 0.51% following permanganate/sulfuric acid treatment. The detection of episulfide directly corroborates a proposed mechanism for the migration of elemental sulfur through carbon.

Absorption↗

PubMed2006

Nitrogenase Fe protein: A molybdate/homocitrate insertase.

The Fe protein is indispensable for nitrogenase catalysis and biosynthesis. However, its function in iron-molybdenum cofactor (FeMoco) biosynthesis has not been clearly defined. Here we show that the Fe protein can act as a Mo/homocitrate insertase that mobilizes Mo/homocitrate for the maturation of FeMoco precursor on NifEN. Further, we establish that Mo/homocitrate mobilization by the Fe protein likely involves hydrolysis of MgATP and protein-protein interaction between the Fe protein and NifEN. Our findings not only clarify the role of the Fe protein in FeMoco assembly and assign another function to this multitask enzyme but also provide useful insights into a mechanism of metal trafficking required for the assembly of complex metalloproteins such as nitrogenase.

Azotobacter vinelandii↗

PubMed2006

FeMo cofactor maturation on NifEN.

FeMo cofactor (FeMoco) biosynthesis is one of the most complicated processes in metalloprotein biochemistry. Here we show that Mo and homocitrate are incorporated into the Fe/S core of the FeMoco precursor while it is bound to NifEN and that the resulting fully complemented, FeMoco-like cluster is transformed into a mature FeMoco upon transfer from NifEN to MoFe protein through direct protein-protein interaction. Our findings not only clarify the process of FeMoco maturation, but also provide useful insights into the other facets of nitrogenase chemistry.

Electron Spin Resonance Spectroscopy↗

PubMed2006

How does single oxygen atom addition affect the properties of an Fe-nitrile hydratase analogue? The compensatory role of the unmodified thiolate.

Nitrile hydratase (NHase) is one of a growing number of enzymes shown to contain post-translationally modified cysteine sulfenic acids (Cys-SOH). Cysteine sulfenic acids have been shown to play diverse roles in cellular processes, including transcriptional regulation, signal transduction, and the regulation of oxygen metabolism and oxidative stress responses. The function of the cysteine sulfenic acid coordinated to the iron active site of NHase is unknown. Herein we report the first example of a sulfenate-ligated iron complex, [Fe(III)(ADIT)(ADIT-O)](+) (5), and compare its electronic and magnetic properties with those of structurally related complexes in which the sulfur oxidation state and protonation state have been systematically altered. Oxygen atom addition was found to decrease the unmodified thiolate Fe-S bond length and blue-shift the ligand-to-metal charge-transfer band (without loss of intensity). S K-edge X-ray absorption spectroscopy and density functional theory calculations show that, although the modified RS-O(-) fragment is incapable of forming a pi bond with the Fe(III) center, the unmodified thiolate compensates for this loss of pi bonding by increasing its covalent bond strength. The redox potential shifts only slightly (75 mV), and the magnetic properties are not affected (the S = (1)/(2) spin state is maintained). The coordinated sulfenate S-O bond is activated and fairly polarized (S(+)-O(-)). Addition of strong acids at low temperatures results in the reversible protonation of sulfenate-ligated 5. An X-ray structure demonstrates that Zn(2+) binds to the sulfenate oxygen to afford [Fe(III)(ADIT)(ADIT-O-ZnCl(3))] (6). The coordination of ZnCl(3)(-) to the RS-O(-) unit causes the covalent overlap with the unmodified thiolate to increase further. A possible catalytic role for the unmodified NHase thiolate, involving its ability to "tune" the electronics in response to protonation of the sulfenate (RS-O(-)) oxygen and/or substrate binding, is discussed.

Hydro-Lyases↗

PubMed2006

Fe L-edge XAS studies of K4[Fe(CN)6] and K3[Fe(CN)6]: a direct probe of back-bonding.

Distinct spectral features at the Fe L-edge of the two compounds K3[Fe(CN)6] and K4[Fe(CN)6] have been identified and characterized as arising from contributions of the ligand pi orbitals due to metal-to-ligand back-bonding. In addition, the L-edge energy shifts and total intensities allow changes in the ligand field and effective nuclear charge to be determined. It is found that the ligand field term dominates the edge energy shift. The results of the experimental analysis were compared to BP86 DFT calculations. The overall agreement between the calculations and experiment is good; however, a larger difference in the amount of pi back-donation between Fe(II) and Fe(III) is found experimentally. The analysis of L-edge spectral shape, energy shift, and total intensity demonstrates that Fe L-edge X-ray absorption spectroscopy provides a direct probe of metal-to-ligand back-bonding.

Algorithms↗

PubMed2006

X-ray absorption spectroscopy and density functional theory studies of [(H3buea)FeIII-X]n- (X = S2-, O2-, OH-): comparison of bonding and hydrogen bonding in oxo and sulfido complexes.

Iron L-edge, iron K-edge, and sulfur K-edge X-ray absorption spectroscopy was performed on a series of compounds [Fe(III)H(3)buea(X)](n-) (X = S(2-), O(2-), OH(-)). The experimentally determined electronic structures were used to correlate to density functional theory calculations. Calculations supported by the data were then used to compare the metal-ligand bonding and to evaluate the effects of H-bonding in Fe(III)(-)O vs Fe(III)(-)S complexes. It was found that the Fe(III)(-)O bond, while less covalent, is stronger than the Fe(III)(-)S bond. This dominantly reflects the larger ionic contribution to the Fe(III)(-)O bond. The H-bonding energy (for three H-bonds) was estimated to be -25 kcal/mol for the oxo as compared to -12 kcal/mol for the sulfide ligand. This difference is attributed to the larger charge density on the oxo ligand resulting from the lower covalency of the Fe-O bond. These results were extended to consider an Fe(IV)(-)O complex with the same ligand environment. It was found that hydrogen bonding to Fe(IV)(-)O is less energetically favorable than that to Fe(III)(-)O, which reflects the highly covalent nature of the Fe(IV)(-)O bond.

Absorptiometry, Photon↗

PubMed2006

Reversible O-O bond cleavage in copper-dioxygen isomers: impact of anion basicity.

Low-temperature oxygenation of copper(I) complexes of N,N,N',N'-tetraethylpropane-1,3-diamine yields solutions containing both mu-eta2:eta2-peroxodicopper(II) (P) and bis(mu-oxo)dicopper(III) (O) valence isomers. The P/O equilibrium position depends on the nature of the counteranion; P is favored with more basic anions. Titration and EXAFS experiments as well as DFT calculations suggest that axial donation from a sulfonate anion to the copper centers imparts an electronic/electrostatic bias toward the P isomer.

Anions↗

PubMed2006

X-ray absorption edge spectroscopy and computational studies on LCuO2 species: Superoxide-Cu(II) versus peroxide-Cu(III) bonding.

The geometric and electronic structures of two mononuclear CuO2 complexes, [Cu(O2){HB(3-Ad-5-(i)Prpz)3}] (1) and [Cu(O2)(beta-diketiminate)] (2), have been evaluated using Cu K- and L-edge X-ray absorption spectroscopy (XAS) studies in combination with valence bond configuration interaction (VBCI) simulations and spin-unrestricted broken symmetry density functional theory (DFT) calculations. Cu K- and L-edge XAS data indicate the Cu(II) and Cu(III) nature of 1 and 2, respectively. The total integrated intensity under the L-edges shows that the 's in 1 and 2 contain 20% and 28% Cu character, respectively, indicative of very covalent ground states in both complexes, although more so in 1. Two-state VBCI simulations also indicate that the ground state in 2 has more Cu (/3d8) character. DFT calculations show that the in both complexes is dominated by O2(n-) character, although the O2(n-) character is higher in 1. It is shown that the ligand L plays an important role in modulating Cu-O2 bonding in these LCuO2 systems and tunes the ground states of 1 and 2 to have dominant Cu(II)-superoxide-like and Cu(III)-peroxide-like character, respectively. The contributions of ligand field (LF) and the charge on the absorbing atom in the molecule (Q(mol)M) to L- and K-edge energy shifts are evaluated using DFT and time-dependent DFT calculations. It is found that LF makes a dominant contribution to the edge energy shift, while the effect of Q(mol)M is minor. The charge on the Cu in the Cu(III) complex is found to be similar to that in Cu(II) complexes, which indicates a much stronger interaction with the ligand, leading to extensive charge transfer.

Algorithms↗

PubMed2006

A new structural motif for biological iron: iron K-edge XAS reveals a [Fe4-mu-(OR)5(OR)(9-10)] cluster in the ascidian Perophora annectens.

The Phlebobranch ascidian Perophora annectens surprisingly exhibited a biological Fe/V ratio of approximately 15:1 on multichannel X-ray fluorescence analysis of two independent collections of organisms. Iron K-edge X-ray absorption spectroscopy (XAS) indicated a single form of iron. The XAS K-edge of the first collection of blood cells was shifted approximately +1 eV relative to that of the second, indicating redox activity with average iron oxidation states of 2.67+ and 2.60+. The first-derivative iron XAS K-edge features at 7120.5, 7124, and 7128 eV resembled the XAS of magnetite but not of ferritin or of dissolved Fe(II) or Fe(III). Pseudo-Voigt fits to blood-cell iron K-edge XAS spectra yielded 12.4 integrated units of preedge intensity, indicating a noncentrosymmetric environment. The non-phase-corrected extended X-ray absorption fine structure (EXAFS) Fourier transform spectrum showed a first-shell O/N peak at 1.55 angstroms and an intense Fe-Fe feature at 2.65 angstroms. Fits to the EXAFS required a split first shell with two O at 1.93 angstroms and three O at 2.07 angstroms, consistent with terminal and bridging alkoxide ligands, respectively. More distant shells included three C at 2.87 angstroms, two Fe at 3.08 angstroms, three O at 3.29 angstroms, and one Fe at 3.8 angstroms. Structural models consistent with these findings include a [Fe4(OR)13](2-/3-) broken-edged Fe4O5 cuboid or a [Fe4(OR)14](3-/4-) "Jacob's ladder" with three edge-fused Fe2(OR)2 rhombs. Either of these models represents an entirely new structural motif for biological iron. Vanadium domination of blood-cell metals cannot be a defining trait of Phlebobranch tunicates so long as P. annectens is included among them.

Animals↗

PubMed2006

mu-eta2:eta2-peroxodicopper(II) complex with a secondary diamine ligand: a functional model of tyrosinase.

The activation of dioxygen (O(2)) by Cu(I) complexes is an important process in biological systems and industrial applications. In tyrosinase, a binuclear copper enzyme, a mu-eta(2):eta(2)-peroxodicopper(II) species is accepted generally to be the active oxidant. Reported here is the characterization and reactivity of a mu-eta(2):eta(2)-peroxodicopper(II) complex synthesized by reacting the Cu(I) complex of the secondary diamine ligand N,N'-di-tert-butyl-ethylenediamine (DBED), [(DBED)Cu(MeCN)](X) (1.X, X = CF(3)SO(3)(-), CH(3)SO(3)(-), SbF(6)(-), BF(4)(-)), with O(2) at 193 K to give [[Cu(DBED)](2)(O(2))](X)(2) (2.X(2)). The UV-vis and resonance Raman spectroscopic features of 2 vary with the counteranion employed yet are invariant with change of solvent. These results implicate an intimate interaction of the counteranions with the Cu(2)O(2) core. Such interactions are supported further by extended X-ray absorption fine structure (EXAFS) analyses of solutions that reveal weak copper-counteranion interactions. The accessibility of the Cu(2)O(2) core to exogenous ligands such as these counteranions is manifest further in the reactivity of 2 with externally added substrates. Most notable is the hydroxylation reactivity with phenolates to give catechol and quinone products. Thus the strategy of using simple bidentate ligands at low temperatures provides not only spectroscopic models of tyrosinase but also functional models.

Binding Sites↗

PubMed2006

Reinvestigation of the method used to map the electronic structure of blue copper proteins by NMR relaxation.

A previous method for mapping the electron spin distribution in blue copper proteins by paramagnetic nuclear magnetic resonance (NMR) relaxation (Hansen DF, Led JJ, 2004, J Am Chem Soc 126:1247-1253) suggested that the blue copper site of plastocyanin from Anabaena variabilis (A.v.) is less covalent than those found for other plastocyanins by other experimental methods, such as X-ray absorption spectroscopy. Here, a detailed spectroscopic study revealed that the electronic structure of A.v. plastocyanin is similar to those of other plastocyanins. Therefore, the NMR approach was reinvestigated using a more accurate geometric structure as the basis for the mapping, in contrast to the previous approach, as well as a more complete spin distribution model including Gaussian-type natural atomic orbitals instead of Slater-type hydrogen-like atomic orbitals. The refinement results in a good agreement between the electron spin density derived from paramagnetic NMR and the electronic structure description obtained by the other experimental methods. The refined approach was evaluated against density functional theory (DFT) calculations on a model complex of the metal site of plastocyanin in the crystal phase. In general, the agreement between the experimental paramagnetic relaxation rates and the corresponding rates obtained by the DFT calculations is good. Small deviations are attributed to minor differences between the solution structure and the crystal structure outside the first coordination sphere. Overall, the refined approach provides a complementary experimental method for determining the electronic structure of paramagnetic metalloproteins, provided that an accurate geometric structure is available.

Anabaena variabilis↗

PubMed2006

Structural insights into a protein-bound iron-molybdenum cofactor precursor.

The iron-molybdenum cofactor (FeMoco) of the nitrogenase MoFe protein is a highly complex metallocluster that provides the catalytically essential site for biological nitrogen fixation. FeMoco is assembled outside the MoFe protein in a stepwise process requiring several components, including NifB-co, an iron- and sulfur-containing FeMoco precursor, and NifEN, an intermediary assembly protein on which NifB-co is presumably converted to FeMoco. Through the comparison of Azotobacter vinelandii strains expressing the NifEN protein in the presence or absence of the nifB gene, the structure of a NifEN-bound FeMoco precursor has been analyzed by x-ray absorption spectroscopy. The results provide physical evidence to support a mechanism for FeMoco biosynthesis. The NifEN-bound precursor is found to be a molybdenum-free analog of FeMoco and not one of the more commonly suggested cluster types based on a standard [4Fe-4S] architecture. A facile scheme by which FeMoco and alternative, non-molybdenum-containing nitrogenase cofactors are constructed from this common precursor is presented that has important implications for the biosynthesis and biomimetic chemical synthesis of FeMoco.

Azotobacter vinelandii↗

PubMed2006

Sulfur K-edge XAS and DFT calculations on nitrile hydratase: geometric and electronic structure of the non-heme iron active site.

The geometric and electronic structure of the active site of the non-heme iron enzyme nitrile hydratase (NHase) is studied using sulfur K-edge XAS and DFT calculations. Using thiolate (RS(-))-, sulfenate (RSO(-))-, and sulfinate (RSO(2)(-))-ligated model complexes to provide benchmark spectral parameters, the results show that the S K-edge XAS is sensitive to the oxidation state of S-containing ligands and that the spectrum of the RSO(-) species changes upon protonation as the S-O bond is elongated (by approximately 0.1 A). These signature features are used to identify the three cysteine residues coordinated to the low-spin Fe(III) in the active site of NHase as CysS(-), CysSOH, and CysSO(2)(-) both in the NO-bound inactive form and in the photolyzed active form. These results are correlated to geometry-optimized DFT calculations. The pre-edge region of the X-ray absorption spectrum is sensitive to the Z(eff) of the Fe and reveals that the Fe in [FeNO](6) NHase species has a Z(eff) very similar to that of its photolyzed Fe(III) counterpart. DFT calculations reveal that this results from the strong pi back-bonding into the pi antibonding orbital of NO, which shifts significant charge from the formally t(2)(6) low-spin metal to the coordinated NO.

Binding Sites↗

PubMed2005

MXAN analysis of the XANES energy region of a mononuclear copper complex: applications to bioinorganic systems.

The near edge XAS spectra of the mononuclear copper complex [Cu(TMPA)(OH(2))](ClO(4))(2) (1) have been simulated using the multiple scattering edge simulation package MXAN (or Minuit XANes). These simulations, which employ the muffin-tin (MT) approximation, have been compared to simulations generated using the finite-difference method (FDM) to evaluate the effect of MT corrections. The sensitivity of the MXAN method was tested using structural models that included several different variations on the bond angles and bond distances for the first-shell atoms of 1. The sensitivity to small structural changes was also evaluated by comparing MXAN simulations of 1 and of structurally modified [Cu(TMPA)(L)](n)(+) complexes [where L = -O-(F(8)TPP)Fe(III), -F, -OPO(2)(O-p-nitrophenyl)Zn(II)(TMPA), and -NCMe] to the experimental data. The accuracy of the bond distances obtained from the MXAN simulations was then examined by comparison to the metrics of the crystal structures. The results show that MXAN can successfully extract geometric information from the edge structure of an XAS spectrum. The systematic application of MXAN to 1 indicates that this approach is sensitive to small structural changes in the molecule that are manifested in the XAS edge spectrum. These results represent the first step toward the application of this methodology to bioinorganic and biological systems.

Chemical Phenomena↗

PubMed2005

Sulfur K-edge XAS and DFT calculations on [Fe4S4]2+ clusters: effects of H-bonding and structural distortion on covalency and spin topology.

Sulfur K-edge X-ray absorption spectroscopy of a hydrogen-bonded elongated [Fe4S4]2+ cube is reported. The data show that this synthetic cube is less covalent than a normal compressed cube with no hydrogen bonding. DFT calculations reveal that the observed difference in electronic structure has significant contributions from both the cluster distortion and from hydrogen bonding. The elongated and compressed Fe4S4 structures are found to have different spin topologies (i.e., orientation of the delocalized Fe2S2 subclusters which are antiferromagnetically coupled to each other). It is suggested that the H-bonding interaction with the counterion does not contribute to the cluster elongation. A magneto-structural correlation is developed for the Fe4S4 cube that is used to identify the redox-active Fe2S2 subclusters in active sites of HiPIP and ferredoxin proteins involving these clusters.

Bacterial Proteins↗

PubMed2005

Nitrogenase reactivity with P-cluster variants.

Nitrogenase is a multicomponent metalloenzyme that catalyzes the conversion of atmospheric dinitrogen to ammonia. For decades, it has been generally believed that the [8Fe-7S] P-cluster of nitrogenase component 1 is indispensable for nitrogenase activity. In this study, we identified two catalytically active P-cluster variants by activity assays, metal analysis, and EPR spectroscopic studies. Further, we showed that both P-cluster variants resemble [4Fe-4S]-like centers based on x-ray absorption spectroscopic experiments. We believe that our findings challenge the dogma that the standard P-cluster is the only cluster species capable of supporting substrate reduction at the FeMo cofactor and provide important insights into the general mechanism of nitrogenase catalysis and assembly.

Azotobacter vinelandii↗