PubMed Health⌕ Search

Biomedical subjects

Chunhai Fan

Publications and source records attributed to Chunhai Fan.

At least 19 recordsLinked to original sources
PubMed2026

Decoding mechanoregulation in immunological synapses using biomimetic artificial cells.

Mechanical force-driven signaling has emerged as a key regulator of cell-cell interactions (CCIs), which can enhance immune cell function. However, current biochemical approaches for studying CCIs offer minimal direct control over cellular bulk phenotypes, while synthetic biomaterial systems fail to mimic the dynamic complexity of cells. Here we introduce kpiCells, a biomaterial-based platform that uses a biomimetic membrane-endoplasmic architecture to enable finely tuned phenocopying of cellular states via modular mechanical, chemical and topographical inputs. We demonstrate that kpiCells can engage in physiological CCIs and reproduce critical subcellular features. In T cell systems, kpiCells enable integrated interrogation of afferent mechanosensing pathways and efferent force-exertion pathways, and support measurement of piconewton-scale forces at individual T cell antigen receptors as well as single cell-cell force fingerprints that define activation thresholds. This work establishes kpiCells as a bionic model that enables synthetic material design with the level of functional complexity approaching living cell systems.

Artificial Cells↗
PubMed2006

Electrochemically controlled formation and growth of hydrogen nanobubbles.

Electrogenerated microscale bubbles that are confined at the electrode surface have already been extensively studied because of their significant influence on electrochemistry. In contrast, as far as we know, whether nanoscale bubbles exist on the electrode surface has not been experimentally confirmed yet. Here, we report the observation of electrochemically controlled formation and growth of hydrogen nanobubbles on bare highly oriented pyrolytic graphite (HOPG) surface via in-situ tapping mode atomic force microscopy (TMAFM). By using TMAFM imaging, we observed that electrochemically generated hydrogen gas led to the formation of nanobubbles at the HOPG surface. We then employed a combination of techniques, including phase imaging, ex-situ degassing, and tip perturbation, to confirm the gas origin of such observed nanobubbles. We further demonstrated that the formation and growth of nanobubbles could be well controlled by tuning either the applied voltage or the reaction time. Remarkably, we could also monitor the evolution process of nanobubbles, that is, formation, growth, coalescence, as well as the eventual release of merged microbubbles from the HOPG surface.

Electrochemistry↗
PubMed2006

Sequence-specific detection of femtomolar DNA via a chronocoulometric DNA sensor (CDS): effects of nanoparticle-mediated amplification and nanoscale control of DNA assembly at electrodes.

We herein report a novel nanoparticle-based electrochemical DNA detection approach. This DNA sensor is based on a "sandwich" detection strategy, which involves capture probe DNA immobilized on gold electrodes and reporter probe DNA labeled with gold nanoparticles that flank the target DNA sequence. Electrochemical signals are generated by chronocoulometric interrogation of [Ru(NH(3))(6)](3+) that quantitatively binds to surface-confined capture probe DNA via electrostatic interactions. We demonstrated that the incorporation of a gold nanoparticle in this sensor design significantly enhanced the sensitivity and the selectivity. Nanoscale control of the self-assembly process of DNA probes at gold electrodes further increased the sensor performance. As a result of these two combined effects, this DNA sensor could detect as low as femtomolar (zeptomoles) DNA targets and exhibited excellent selectivity against even a single-base mismatch. In addition, this novel DNA sensor showed fairly good reproducibility, stability, and reusability.

DNA↗
PubMed2005

Electrochemical interrogation of DNA monolayers on gold surfaces.

In this report, we systematically investigated DNA immobilization at gold surfaces with electrochemical techniques. Comparative cyclic voltammetric and chronocoulometric studies suggested that DNA monolayers immobilized at gold surfaces were not homogeneous. Nonspecific Au-DNA interactions existed even with the treatment of mercaptohexanol, which was known to competitively remove loosely bound DNA at gold surfaces. While both thiolated and nonthiolated DNA formed monolayers on gold surfaces, their hybridization abilities were distinctly different. In contrast to thiolated DNA probes, nonthiolated DNA probes immobilized at gold surfaces were essentially nonhybridizable. The experimental results presented here might be useful for the design of high-performance electrochemical DNA sensors.

DNA↗
PubMed2005

Magnetically assisted DNA assays: high selectivity using conjugated polymers for amplified fluorescent transduction.

We report a strategy for conjugated polymer (CP)-based optical DNA detection with improved selectivity. The high sensitivity of CP-based biosensors arises from light harvesting by the CP and the related amplified fluorescent signal transduction. We demonstrate that the use of magnetic microparticles significantly improves the selectivity of this class of DNA sensors. Compared with previously reported DNA sensors with CP amplification, this novel sensing strategy displays excellent discrimination against non-cognate DNA in the presence of a protein mixture or even human serum. We also demonstrate that the magnetically assisted DNA sensor can conveniently identify even a single-nucleotide mismatch in the target sequence.

Base Pair Mismatch↗
PubMed2005

Electrochemical investigation of redox thermodynamics of immobilized myoglobin: ionic and ligation effects.

In this study, we investigated redox thermodynamics of myoglobin as well as the ionic (phosphate ions) and ligation (imidazole) effects via a dynamic electrochemical approach. We employed a previously established system that features nonmediated, direct electrochemistry of myoglobin and myoglobin in an immobilized state (i.e., diffusionless electrochemistry). Thermodynamics parameters were obtained by measuring redox potential (E degrees ') of myoglobin at varied temperature (T), in the presence and in the absence of specific ions or axial ligands. As a step further, we evaluated contributions from allosteric effect and axial iron ligation by partitioning E degrees ' changes into entropic and enthalpic terms. Compensation phenomena between the entropic and enthalpic changes were observed in all these cases. On the basis of these studies, we also correlated these phenomena to possible structural variations.

Allosteric Regulation↗
PubMed2005

Biosensors based on binding-modulated donor-acceptor distances.

The promising recognition characteristics exhibited by biomolecules have caused significant interest in biomolecule-based sensor strategies. Here we review several emerging biosensor designs that use modulated electron or energy transfer to a bio-specific ligand as the signaling mechanism. The efficiencies of both electron transfer and energy transfer are strongly dependent on donor-acceptor distance. When coupled with the large conformational changes sometimes associated with biomolecular recognition, these distance-dependent processes provide a robust means for generating optical and electronic signals.

Biosensing Techniques↗
PubMed2004

Tuning the redox and enzymatic activity of glucose oxidase in layered organic films and its application in glucose biosensors.

Glucose oxidase was embedded in organic films through a layer-by-layer approach, where the enzyme demonstrated significantly enhanced electron-transfer reactivity and finely tuned enzymatic activity. An unmediated, reagentless glucose biosensor was accordingly prepared with two polyethylenimine/glucose oxidase bilayers-modified pyrolytic graphite electrode. A calibration linear range of glucose was 0.5-8.9 mM with a detection limit of 50 microM and sensitivity of 0.76 microA mM(-1).

Aspergillus niger↗
PubMed2004

Electrochemical investigations of baicalin and DNA-baicalin interactions.

Baicalin is an anti-HIV drug purified from the traditional Chinese medicinal plant Scutellaria Baicalensis Georgi. Baicalin has proven to be electroactive at pyrolytic graphite (PG) electrodes. We thus studied its interaction with DNA via the electrochemical approach. We observed that the peak currents corresponding to the baicalin reduction-oxidation (redox) reaction significantly decrease upon the addition of DNA. With complementary ultraviolet/visible (UV/Vis) spectroscopic evidence, we suggest that baicalin binds to DNA through intercalation. This feature has enabled baicalin to discriminate between double-stranded DNA (dsDNA) and single-stranded DNA (ssDNA).

Animals↗
PubMed2004

Electrochemical investigation of the chloride effect on hemoglobin.

Direct electron transfer between hemoglobin and gold electrode is achieved at both a bare and a 4, 4'-bipyridine-modified gold electrode in the presence of chloride ions. The addition of chloride to hemoglobin solution also increases the reversibility of the direct electrochemistry and shifts the formal potential of hemoglobin to the negative direction. While the existence of chloride does not significantly change the tertiary structure of the protein, it might induce a slight variation of the structure, which is beneficial to the electrochemical response. It is suggested that the chloride binding to hemoglobin is a combination of specific and unspecific bindings.

Animals↗
PubMed2003

A nitric oxide biosensor based on the multi-assembly of hemoglobin/montmorillonite/polyvinyl alcohol at a pyrolytic graphite electrode.

Direct electron transfer of hemoglobin (Hb) can be achieved in a Hb/montmorillonite (MMT)/polyvinyl alcohol multi-assembly at a pyrolytic graphite (PG) electrode. Accordingly, a novel nitric oxide (NO) biosensor is proposed. The reduction of NO is observed at a potential of approximately -783 mV (vs. SCE) at pH 5.5. At optimum pH, this biosensor shows a wide linear range of 1.0x10(-6)-2.5x10(-4) mol/l with a detection limit of 5.0x10(-7) mol/l. The sensor-to-sensor reproducibility is good consideringmacr; a relative standard deviation of 3.5% in five independent determinations at 5.0x10(-5) mol/l NO. The modified electrode is conveniently constructed and durable in long-term operations.

Bentonite↗
PubMed2003

An easy and rapid method to determine aristolochic acids I and II with high sensitivity.

Aristolochic acid (AA), a natural component in some Chinese medicinal plants, is nephrotoxic and carcinogenic, and is involved in a specific type of renal fibrosis, called Chinese herbs nephropathy (CHN). In this paper, we report the electrochemistry of AA and a novel method to detect the species based on the electrochemical studies. The detection limit is estimated to be 1.0x10(-8) M with a linear range from 5.0x10(-8) M to 1.3x10(-6) M. Meanwhile, this method is applicable in detection in real samples, such as Caulis Aristolochiae Manshuriensis (CAM), Radix Aristolochiae (RA), Fructus Aristolochiae (FA) and Radix Stephaniae Tetrandrae (RST). The concentration of AA in the CAM sample was 3.50 +/- 0.12x10(-4) M. Consistent results have been obtained from both the electrochemical approach described here and the previously reported HPLC method.

Aristolochia↗
PubMed2003

An electrochemical investigation of ligand-binding abilities of film-entrapped myoglobin.

Film-entrapped myoglobin exhibits well-defined electrochemistry which, upon ligand binding, displays a titratable redox potential shift. This effect has been observed to be highly dependent on the charged state of involved films. We have demonstrated that this approach may act as a model system for studies of molecular recognition between proteins and ligands.

Cetrimonium↗
PubMed2003

Direct electrochemical characterization of Vitreoscilla sp. hemoglobin entrapped in organic films.

The redox properties of a prokaryotic, Vitreoscilla sp. hemoglobin (VHb) in fuzzy organic films are studied with electrochemistry. This VHb exhibits irreversible electrochemical response at bare pyrolytic graphite (PG) electrode surfaces. However, upon being entrapped in organic films, the heterogeneous electron transfer rate of VHb will be sufficiently high to produce a quasi-reversible electrochemical response. The observation of electrocatalysis (reduction of O2) by hemes suggests that the protein can retain its biological activity under these conditions.

Bacterial Proteins↗