PubMed Health⌕ Search

Biomedical subjects

Clemens Burda

Publications and source records attributed to Clemens Burda.

14 recordsLinked to original sources

Observation of non-Förster-type energy-transfer behavior in quantum dot-phthalocyanine conjugates.

The effect of linker chain length on the energy transfer from CdSe quantum dots (QDs) to silicon phthalocyanine (Pc) photodynamic therapy agents was investigated by steady-state and femtosecond time-resolved spectroscopy with 500 nm light for the specific excitation of the QD energy donor. The conjugation between the QD and the Pc was achieved with linker chains varying from 4 to 9 bond lengths by incorporating 1-6 methylene groups into the axial ligand of the Pc. With increasing chain length, the energy-transfer efficiency increased, which appears to be opposed to a purely Förster-type resonance energy-transfer behavior that is commonly discussed for the energy transfer in QD conjugates. The obtained results provide strong evidence for a capping-layer-mediated energy transfer in the QD-based donor-acceptor conjugates.

Energy Transfer↗

Copper oxide nanocrystals.

It is well-known that inorganic nanocrystals are a benchmark model for nanotechnology, given that the tunability of optical properties and the stabilization of specific phases are uniquely possible at the nanoscale. Copper (I) oxide (Cu(2)O) is a metal oxide semiconductor with promising applications in solar energy conversion and catalysis. To understand the Cu/Cu(2)O/CuO system at the nanoscale, we have developed a method for preparing highly uniform monodisperse nanocrystals of Cu(2)O. The procedure also serves to demonstrate our development of a generalized method for the synthesis of transition metal oxide nanocrystals. Cu nanocrystals are initially formed and subsequently oxidized to form highly crystalline Cu(2)O. The volume change during phase transformation can induce crystal twinning. Absorption in the visible region of the spectrum gave evidence for the presence of a thin, epitaxial layer of CuO, which is blue-shifted, and appears to increase in energy as a function of decreasing particle size. XPS confirmed the thin layer of CuO, calculated to have a thickness of approximately 5 A. We note that the copper (I) oxide phase is surprisingly well-stabilized at this length scale.

Journal Article↗

Investigation of the crystallization process in 2 nm CdSe quantum dots.

Investigation of the growth of CdSe nanocrystals ( approximately 160 atoms) to the uniquely stable size of 2 nm allows the monitoring of the crystallization process in semiconductor quantum dots. By using a combination of optical techniques, high-resolution transmission electron microscopy (HRTEM), and powder X-ray diffractometry (XRD), new phenomena were explored during the CdSe nanocrystal growth process, which involved significant morphological reconstruction and crystallization of the initially formed amorphous nanoparticles. During the crystallization, the absorption onset of the CdSe quantum dots blue shifted toward higher energies at 3 eV (414 nm), while the photoluminescence red shifted to lower energies. Furthermore, an apparent increasing Stokes shift was observed during the formation of small CdSe nanoparticles. On the other hand, the photoluminescence excitation spectra showed constant features over the reaction time. Additionally, results from HRTEM and XRD studies show that the CdSe nanoparticles were amorphous at early reaction stages and became better crystallized after longer reaction times, while the particle size remained the same during the crystallization process. These observations demonstrate the important role of the surface on the optical properties of small CdSe quantum dots and facilitated the spectroscopic monitoring of the crystallization process in quantum dots.

Journal Article↗

Doped semiconductor nanomaterials.

The development and properties of doped nanomaterials including doped titanium dioxide, doped silicon, and doped cadmium telluride are reviewed, as well as their ultrafast dynamics. Doping nanomaterials provides a flexible way to tune to the properties of the materials while maintaining their high surface areas. The electronic, optical, photochemical, photoelectrochemical, photocatalytic and photoexcited relaxation properties can be tuned towards the desired direction by doping different elements. The materials can be engineered towards specific applications through careful selection of the dopants.

Crystallization↗

Heterostructured Bi2Se3 nanowires with periodic phase boundaries.

Single and multijunction nanowires with diameters of 10-40 nm were synthesized by an electrically assisted sonochemical method in aqueous solution at room temperature. By properly controlling the reaction conditions and reactants, this method opens a new strategy towards the fabrication of one-dimensional superlattices in nanowires under ambient conditions. Such a chemical approach provides a promising and simple way to synthesize high-performance building blocks for device applications.

Journal Article↗

Semiconductor quantum dots for photodynamic therapy.

The applicability of semiconductor QDs in photodynamic therapy (PDT) was evaluated by studying the interaction between CdSe QDs with a known silicon phthalocyanine PDT photosensitizer, Pc4. The study revealed that the QDs could be used to sensitize the PDT agent through a fluorescence resonance energy transfer (FRET) mechanism, or interact directly with molecular oxygen via a triplet energy-transfer process (TET). Both mechanisms result in the generation of reactive singlet oxygen species that can be used for PDT cancer therapy.

Cadmium Compounds↗

Fluorescence resonance energy transfer reveals a binding site of a photosensitizer for photodynamic therapy.

Phthalocyanine (Pc) 4, like many photosensitizers for photodynamic therapy (PDT), localizes to intracellular membranes, especially mitochondria. Pc 4-PDT photodamages Bcl-2 and Bcl-xL, antiapoptotic proteins interacting with the permeability transition pore complex that forms at contact sites between the inner and outer mitochondrial membranes. These complexes and the inner membrane are unique in containing the phospholipid cardiolipin. Nonyl-acridine orange (NAO) is a specific probe of cardiolipin. Here we show evidence for fluorescence resonance energy transfer from NAO to Pc 4, defining a binding site for the photosensitizer. This observation establishes an innovative tool for exploring the localization of other photosensitizers and additional fluorescent, mitochondrion-localizing drugs having appropriate spectral properties.

Acridine Orange↗

X-ray structures, photophysical characterization, and computational analysis of geometrically constrained copper(I)--phenanthroline complexes.

A series of three geometrically constrained C(2)-symmetric Cu(I) mono-phenanthroline complexes were characterized by X-ray structural analysis, and their photophysical properties were investigated by absorption and emission spectroscopy. Visible light excitation yielded metal-to-ligand charge-transfer (MLCT) excited states with luminescence lifetimes up to 155 ns. Ultrafast transient absorption spectroscopy provided further insights into the excited-state dynamics and suggests for all three complexes the formation of a phenanthroline radical anion. In agreement with electrochemical measurements, the data further indicate that coordinative rearrangements are involved in nonradiative deactivation of the excited states. According to time-dependent density functional theory calculations (B3LYP/6-31G), the major MLCT transitions are polarized along the C(2) axis of the complex and originate predominantly from the copper d(xz) orbital. The computational analysis identifies an excited-state manifold with a number of close-lying, potentially emissive triplet states and is in agreement with the multiexponential decay kinetics of the MLCT luminescence. The relationship between structural and photophysical data of the studied Cu(I) mono-phenanthroline complexes agrees well with current models describing the photophysics of the related Cu(I) bis-diimine complexes.

Journal Article↗

Experimental evidence for the photoisomerization of higher fullerenes.

The initial relaxation dynamics of the photoexcited fullerenes C60, C70, C76, C84, C86, and C90 were investigated by dispersion-free femtosecond pump-probe spectroscopy. Under identical excitation conditions, the formation of the lowest excited state slows down for the larger fullerenes. This trend in dynamics, monitored throughout the visible and NIR range, is found to correlate with the number of isomers in accordance with the isomerization mechanism suggested by Stone and Wales. The Stone-Wales isomerization was calculated as thermally inaccessible but photoinduced barrierless. The energy difference of the isomers is in the 1 meV range, and back-isomerization is observed on the picosecond time scale. The characteristic spectrally broad transient absorption of the investigated fullerenes is promising for fast optical gating applications.

Journal Article↗

The quenching of CdSe quantum dots photoluminescence by gold nanoparticles in solution.

The photoluminescence (PL) of CdSe quantum dots (QD) in aqueous media has been studied in the presence of gold nanoparticles (NP) with different shapes. The steady state PL intensity of CdSe QD (1.5-2 nm in size) is quenched in the presence of gold NP. Picosecond bleach recovery and nanosecond time-resolved luminescence measurements show a faster bleach recovery and decrease in the lifetime of the emitting states of CdSe QD in the presence of quenchers. Surfactant-capped gold nanorods (NR) with aspect ratio of 3 and surfactant-capped and citrate-capped nanospheres (NS) of 12 nm diameter were used as quenchers in order to study the effect of shape and surface charge on the quenching rates. The Stern-Volmer kinetics model is used to examine the observed quenching behavior as a function of the quencher concentration. It was found that the quenching rate of NR is more than 1000 times stronger than that of NS with the same capping material. We also found that the quenching rate decreases as the length of the NR decreases, although the overlap between the CdSe emission and the NR absorption increases. This suggests that the quenching is a result of electron transfer rather than long-range (Forster-type) energy transfer processes. The quenching was attributed to the transfer of electron with energies below the Fermi level of gold to the trap holes of CdSe QD. The observed large difference between NR and NS quenching efficiencies was attributed to the presence of the [110] facets only in the NR, which have higher surface energy.

Cadmium↗

Quantum dot-based energy transfer: perspectives and potential for applications in photodynamic therapy.

Quantum dots have emerged as an important class of material that offers great promise to a diverse range of applications ranging from energy conversion to biomedicine. Here, we review the potential of using quantum dots and quantum dot conjugates as sensitizers for photodynamic therapy (PDT). The photophysics of singlet oxygen generation in relation to quantum dot-based energy transfer is discussed and the possibility of using quantum dots as photosensitizer in PDT is assessed, including their current limitations to applications in biological systems. The biggest advantage of quantum dots over molecular photosensitizers that comes into perspective is their tunable optical properties and surface chemistries. Recent developments in the preparation and photophysical characterization of quantum dot energy transfer processes are also presented in this review, to provide insights on the future direction of quantum dot-based photosensitization studies from the viewpoint of our ongoing research.

Energy Transfer↗