PubMed Health⌕ Search

Biomedical subjects

D J Valentino

Publications and source records attributed to D J Valentino.

17 recordsLinked to original sources
PubMed2001

Automatic skeleton generation for visualizing 3D, time-dependent fluid flows: application to the virtual aneurysm.

Intracranial aneurysms are the primary cause of non-traumatic subarachnoid hemorrhage. Difficulties in identifying which aneurysms will grow and rupture arise because the physicians lack important anatomic and hemodynamic information. Through simulation, this data can be captured, but visualization of large simulated data sets becomes cumbersome, often resulting in visual clutter and ambiguity. To address these visualization issues, we developed an algorithm that extracts a skeleton of the patterns in 3D, time-dependent blood flow. The algorithm decomposes the blood flow into "bare-bones" components that can be visualized individually or superimposed together to formulate an understanding of the flow patterns in the aneurysm.

Cerebrovascular Circulation↗
PubMed2001

Disease specific intelligent pre-fetch and hanging protocol for diagnostic neuroradiology workstations.

Clinical data sets for neuroradiological cases can be quite large. A typical brain tumor patient at UCLA will undergo 8-10 separate studies over a 2 year period, each study will produce 60-100 magnetic resonance (MR) images. Gathering and sorting through a patient s imaging events during the course of treatment can be both overwhelming and time consuming. The purpose of this research is to develop an intelligent pre-fetch and hanging protocol that automatically gathers the relevant prior examinations from a picture archiving, and communication systems (PACS) archive and sends the pertinent historical images to the diagnostic display station where the new examination is subsequently read out. The intelligent hanging protocol describes the type of layout and sequence for image display. We have developed a classification scheme to organize the pertinent patient information to selectively pre-fetch and intelligently present the images to review brain tumor cases for a diagnostic neuroradiology workstation.

Databases as Topic↗
PubMed2000

Web-based video for real-time monitoring of radiological procedures.

A web-based video transmission of images from CT and MRI consoles was implemented in an Intranet environment for real-time monitoring of ongoing procedures. Images captured from the consoles are compressed to video resolution and broadcast through a web server. When called upon, the attending radiologists can view these live images on any computer within the secured Intranet network. With adequate compression, these images can be displayed simultaneously in different locations at a rate of 2 to 5 images/s through a standard local-area network. While the quality of the images was insufficient for diagnostic purposes, our users survey showed that they were suitable for supervising a procedure, positioning the imaging slices, and for routine quality checking before completion of a study. The system was implemented at UCLA to monitor nine CT's and six MRI's distributed in four different buildings. This system significantly improved the radiologists productivity by saving valuable time spent in trips between reading rooms and examination rooms. It also improved patient care and throughput by reducing the time spent waiting for the radiologists to check a study before removing the patient from the scanner.

Internet↗
PubMed2000

X-ray videodensitometric methods for blood flow and velocity measurement: a critical review of literature.

Blood flow rate and velocity are important parameters for the study of vascular systems, and for the diagnosis, monitoring and evaluation of treatment of cerebro- and cardiovascular disease. For rapid imaging of cerebral and cardiac blood vessels, digital x-ray subtraction angiography has numerous advantages over other modalities. Roentgen-videodensitometric techniques measure blood flow and velocity from changes of contrast material density in x-ray angiograms. Many roentgen-videodensitometric flow measurement methods can also be applied to CT, MR and rotational angiography images. Hence, roentgen-videodensitometric blood flow and velocity measurement from digital x-ray angiograms represents an important research topic. This work contains a critical review and bibliography surveying current and old developments in the field. We present an extensive survey of English-language publications on the subject and a classification of published algorithms. We also present descriptions and critical reviews of these algorithms. The algorithms are reviewed with requirements imposed by neuro- and cardiovascular clinical environments in mind.

Algorithms↗
PubMed1999

Teleradiology in the operating room of the future.

Recent advances in magnetic resonance imaging (MRI) are rapidly making this modality the imaging method of choice for image-guided neurosurgical operations. However, to be ready for its prime time in the operating room (OR), utilization of MRI in the OR requires development of better techniques for image-guided navigation, as well as interactive real-time teleradiologic methods that will allow tele-collaboration between the surgeon and the radiologist. This presentation describes our work in progress toward achievement of teleradiology in the OR.

Computer Systems↗
PubMed1999

Comparison of methods for instantaneous angiographic blood flow measurement.

Several different algorithms have been reported for measurement of blood flow rates and velocities from digital x-ray angiograms. We compare four videodensitometric methods: (1) distance-density curve matching (DDCM), (2) distance-density curve matching with curve-fitting (DDCM-F), (3) bolus mass tracking with curve-fitting (BMT-F) and (4) fluid continuity method (FCM). We tested the flow algorithms with simulated angiograms and with images obtained from a programmable flow phantom under clinically realistic flow and contrast injection conditions including imperfect mixing. All methods perform well for simulated angiograms. On phantom angiograms with constant flow, all methods tended to underestimate flow velocities by at least 7% and demonstrate high variability between consecutive measurements. The FCM demonstrated relatively low variability, but a large negative bias. The DDCM method was moderately biased and had the highest variability. The BMT-F method demonstrated the lowest bias (-7.1%) and the lowest variability both within (27%) and between (27%) studies. No method yields reliable measurements near the peak contrast opacification, when little or no gradient of contrast is present. The extrapolating version of the BMT-F method was also the most robust for estimation of interframe displacements longer than the field of view.

Algorithms↗
PubMed1999

Interactive visualization of 3D fields and images on inexpensive workstations using VRML.

The visualization of volumetric medical images and static or time-dependent vector fields is performed on personal computers over the Web using an interactive 3D interface based on VRML and Java. The VRML client obtains field information and the surface models of examined objects from a server accessible over the Internet. Various virtual tools enable radiologists and referring physicians to visualize and manipulate complex data sets using a simple interface on low-cost computers.

Humans↗
PubMed1997

Assessment of intraaxial and extraaxial brain lesions with digitized computed tomographic images versus film: ROC analysis.

RATIONALE AND OBJECTIVES: The authors evaluated the diagnostic accuracy of viewing computed tomographic (CT) scans as film versus soft-copy images at a workstation. METHODS: Receiver operating characteristic analysis of the interpretation of 202 CT scans (103 were normal, 99 were abnormal) by five neuroradiologists was performed. Abnormal images contained high- or low-attenuation intraaxial lesions or extraaxial fluid (subdural, subarachnoid, or epidural hemorrhage). Hard copies were read on a standard light box, and digital images were examined at a 1,024 x 1,250 workstation. Lesion location and type and confidence ratings were recorded on a worksheet. RESULTS: There were no statistically significant differences in diagnostic accuracy between the two display modes. Reader performance was slightly better with the workstation in the assessment of low-attenuation lesions. CONCLUSION: Diagnostic accuracy is similar for CT scans displayed at a workstation and those displayed as hard copy in the assessment of subtle intra- and extraaxial brain lesions.

Brain↗
PubMed1996

Architectural design and tools to support the transparent access to hospital information systems, radiology information systems, and picture archiving and communication systems.

The fragmentation of the electronic patient record among hospital information systems (HIS), radiology information systems (RIS), and picture archiving and communication systems (PACS) makes the viewing of the complete medical patient record inconvenient. The purpose of this report is to describe the system architecture, development tools, and implementation issues related to providing transparent access to HIS, RIS, and PACS information. A client-mediator-server architecture was implemented to facilitate the gathering and visualization of electronic medical records from these independent heterogeneous information systems. The architecture features intelligent data access agents, run-time determination of data access strategies, and an active patient cache. The development and management of the agents were facilitated by data integration CASE (computer-assisted software engineering) tools. HIS, RIS, and PACS data access and translation agents were successfully developed. All pathology, radiology, medical, laboratory, admissions, and radiology reports for a patient are available for review from a single integrated workstation interface. A data caching system provides fast access to active patient data. New network architectures are evolving that support the integration of heterogeneous software subsystems. Commercial tools are available to assist in the integration procedure.

Computer Systems↗
PubMed1996

Ultrafast networks (ATM): first clinical experiences.

Ultrafast networks using asynchronous transfer mode (ATM) technology can provide the bandwidth and throughput that may be sufficient to satisfy the medical imaging community. Several trials are underway to assess the effect of ATM network capabilities on the clinical practice of radiology, by providing immediate interactive radiology consultations between subspecialists and general radiologists at affiliated academic institutions. The hardware to build such networks is now commercially available and its cost is decreasing steadily, but the monthly charges for ATM bandwidth use are still high. Nevertheless, given the tremendous increase in communication capability and data transfer rates possible with ATM networks, cost alone should not be the determining factor for selecting this technology. The ATM concept in general is first reviewed, followed by a description of early clinical ATM network installation in four medical environments worldwide. These medical clusters include: the UCLA affiliated hospitals (UCLA Medical Center, West LA VAMC and Olive-View UCLA Medical Center), the UCSF affiliated hospitals, Duke University Hospitals and a cluster of medical centers in Berlin which have all been connected via ATM networks. The use of ATM technology in these realistic clinical environments is discussed and evaluated for its potential impact on patient care and clinical teaching within radiology departments. From this preliminary study it is concluded that image communications over a regional PACS using an ATM network can allow interactive consultations between different subspecialist and general radiologists or other specialized radiologists spread over different medical centers.

Computer Systems↗
PubMed1996

The virtual aneurysm. Virtual reality in endovascular therapy.

Image guided therapies, such as new endovascular procedures for treating brain aneurysms are now in clinical use. To plan these procedures, physicians currently use angiography to view projectional images of anatomy and blood flow. There are currently no available tools for visualizing the details of complex blood flow or predicting the effects of specific treatments. To address this problem, we have created a virtual environment for the visualization of blood flow and the simulated effects of therapy in brain aneurysms. The "Virtual Aneurysm" is composed using a combination of image processing, flow simulation, scientific visualization, and virtual reality techniques.

Angiography, Digital Subtraction↗
PubMed1994

A nonlinear mathematical model for the development and rupture of intracranial saccular aneurysms.

Mathematical models of aneurysms are typically based on Laplace's law which defines a linear relation between the circumferential tension and the radius. However, since the aneurysm wall is viscoelastic, a nonlinear model was developed to characterize the development and rupture of intracranial spherical aneurysms within an arterial bifurcation and describes the aneurysm in terms of biophysical and geometric variables at static equilibrium. A comparison is made between mathematical models of a spherical aneurysm based on linear and nonlinear forms of Laplace's law. The first form is the standard Laplace's law which states that a linear relation exists between the circumferential tension, T, and the radius, R, of the aneurysm given by T = PR/2t where P is the systolic pressure. The second is a 'modified' Laplace's law which describes a nonlinear power relation between the tension and the radius defined by T = ARP/2At where A is the elastic modulus for collagen and t is the wall thickness. Differential expressions of these two relations were used to describe the critical radius or the radius prior to aneurysm rupture. Using the standard Laplace's law, the critical radius was derived to be Rc = 2Et/P where E is the elastic modulus of the aneurysm. The critical radius from the modified Laplace's law was R = [2Et/P]2At/P. Substituting typical values of E = 1.0 MPa, t = 40 microns, P = 150 mmHg, and A = 2.8 MPa, the critical radius is 4.0 mm using the standard Laplace's law and 4.8 mm for the modified Laplace's law.(ABSTRACT TRUNCATED AT 250 WORDS)

Aneurysm, Ruptured↗
PubMed1994

A nonlinear mathematical model for the development and rupture of intracranial fusiform aneurysms.

Laplace's law, which describes a linear relation between the tension and the radius, is often used to characterize the mechanical response of the aneurysm wall to distending pressures. However, histopathological studies have confirmed that the wall of the fully developed aneurysm consists primarily of collagen and is subject to large increases in tension for small increases in the radius, i.e., a nonlinear relationship exists between the tension within the aneurysm wall and the radius. Thus, a nonlinear version of Laplace's law is proposed to accurately describe the development and rupture of a fusiform saccular aneurysm. The fusiform aneurysm was modelled as a thin-walled ellipsoidal shell with a major axis radius, Ra, minor axis radius, Rb, circumferential tension, S0, and meridional tension, S phi, with phi defining the angle from the surface normal. Using both linear and nonlinear models, differential expressions of the volume distensibility evaluated at 90 degrees were used to determine the critical radius of the aneurysm along the minor axis from S0 and S phi in terms of the following geometric and biophysical variables; A, elastic modulus of collagen; E, elastic modulus of the aneurysm (elastin and collagen); t, wall thickness; P, systolic pressure; and Ra. For typical physiological values of A = 2.8 MPa, E = 1.0 MPa, T = 40 microns, P = 150 mmHg, and Ra = 4Rb, the linear model yielded critical radii of 4.0 mm from S phi and 2.2 mm from S0. The resultant critical radius was 4.56 mm. Using the same values, the critical radii from the tension components of the nonlinear model were 3.5 mm from S phi and 1.9 mm from S0.(ABSTRACT TRUNCATED AT 250 WORDS)

Aneurysm, Ruptured↗
PubMedDate not supplied

Computer-aided design and modeling of workstations and radiology reading rooms for the new millennium.

Three-dimensional (3D) computer modeling, simulation, and rendering techniques were used to redesign the diagnostic workstations and radiology reading rooms for a proposed hospital with particular attention given to lighting conditions, noise reduction, and optimal use of limited workspace. The results were presented to a panel of multidisciplinary experts and iteratively improved and redesigned with the development or addition of new design criteria or requirements. These 3D techniques allowed faster, more efficient design and presentation of multiple options than is possible with traditional two-dimensional drawings, thereby expediting decision making and resulting in significant savings. The current workstation designs can easily be developed and implemented with available technology at a reasonable cost. They can also accommodate anticipated advances in computer and display technology as well as new imaging paradigms (eg, changes in keyboard and control ergonomics such as adjustable virtual keys on touch-sensitive screens, digital drawing tablets for annotations and controls, direct film digitizing, personal identification devices, offline media readers such as compact disks and digital videodisks, and speech recognition and voice activation). Use of 3D techniques in designing other parts of the radiology department (eg, examination rooms, technologists' areas, physicians' offices) could greatly improve and facilitate the design and implementation of complex settings in these work areas.

Computer Simulation↗
PubMedDate not supplied

An alternative to synthetic aortic grafts using jejunum.

Synthetic materials currently used for arterial grafts can provoke serious complications such as infection, rejection, and incomplete reendothelialization. Porcine small intestinal submucosa (SIS) allografts (homografts) may not share these disadvantages yet still may provide an effective graft alternative. This study was designed to provide additional information concerning the performance of this material when used as an allo-patch graft. A porcine model was selected to enable hemodynamic comparisons to the adult human physiology. Slaughterhouse small intestine was used to prepare the SIS graft material. A well-vascularized section ofjejunum was resected, rinsed, and maintained in 0.9% NaCl solution containing 10% gentamicin. The graft was prepared by removing the serosal layer, inverting the material, and discarding the mucosal surface in a similar manner. The remaining submucosa and stratum compactum constituted the graft material and was subdivided into sizes from 1.5 to 3.0 cm2 tacked to foil for manageability, and was returned to the gentamicin solution. The surgery was initiated with a femoral arterial line in the anesthetized swine, followed by isolation and preparation of the infrarenal aorta for grafting. Cross-clamps were applied and a 1.0 x 1.5-cm section of aortic wall was resected. Two sides of allograft were freed from the foil and sewn into the aorta. Then the remaining sides were removed from the foil and final graft placement was completed. The graft was harvested at postoperative day 28 and presented for microscopic examination. Results confirmed that reendothelialization with neovascularization had occurred during this interval.

Animals↗