Biomedical subjects

Daeyeon Lee

Publications and source records attributed to Daeyeon Lee.

7 recordsLinked to original sources

PubMed2007

Heterostructured magnetic nanotubes.

Heterostructured magnetic tubes with submicrometer dimensions were assembled by the layer-by-layer deposition of polyelectrolytes and nanoparticles in the pores of track-etched polycarbonate membranes. Multilayers composed of poly(allylamine hydrochloride) and poly(styrene sulfonate) assembled at high pH (pH > 9.0) were first assembled into the pores of track-etched polycarbonate membranes, and then multilayers of magnetite (Fe3O4) nanoparticles and PAH were deposited. Transmission electron microscopy (TEM) confirmed the formation of multilayer nanotubes with an inner shell of magnetite nanoparticles. These tubes exhibited superparamagnetic characteristics at room temperature (300 K) as determined by a SQUID magnetometer. The surface of the magnetic nanotubes could be further functionalized by adsorbing poly(ethylene oxide)-b-poly(methacrylic acid) block copolymers. The separation and release behavior of low molecular weight anionic molecules (i.e., ibuprofen, rose bengal, and acid red 8) by/from the multilayer nanotubes were studied because these tubes could potentially be used as separation or targeted delivery vehicles. The magnetic tubes could be successfully used to separate (or remove) a high concentration of dye molecules (i.e., rose bengal) from solution by activating the nanotubes in acidic solution. The release of the anionic molecules in physiologically relevant buffer solution showed that whereas bulky molecules (e.g., rose bengal) release slowly, small molecules (i.e., ibuprofen) release rapidly from the multilayers. The combination of the template method and layer-by-layer deposition of polyelectrolytes and nanoparticles provides a versatile means to create functional nanotubes with heterostructures that can be used for separation as well as targeted delivery.

Journal Article↗

PubMed2006

Two-level antibacterial coating with both release-killing and contact-killing capabilities.

Using a combination of an aqueous layer-by-layer deposition technique, nanoparticle surface modification chemistry, and nanoreactor chemistry, we constructed thin film coatings with two distinct layered functional regions: a reservoir for the loading and release of bactericidal chemicals and a nanoparticle surface cap with immobilized bactericides. This results in dual-functional bactericidal coatings bearing both chemical-releasing bacteria-killing capacity and contact bacteria-killing capacity. These dual-functional coatings showed very high initial bacteria-killing efficiency due to the release of Ag ions and retained significant antibacterial activity after the depletion of embedded Ag because of the immobilized quaternary ammonium salts.

Anti-Bacterial Agents↗

PubMed2006

pH-induced hysteretic gating of track-etched polycarbonate membranes: swelling/deswelling behavior of polyelectrolyte multilayers in confined geometry.

pH-induced hysteretic gating of track-etched polycarbonate membranes (TEPC) has been achieved by depositing layer-by-layer assembled polyelectrolyte multilayers comprising poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS) at a high pH condition (pH > 9.0). Scanning electron microscopy and transmission electron microscopy showed that the average bilayer thickness of multilayers was greater within the cylindrical pores of track-etched polycarbonate membranes compared to the multilayers on planar substrates (e.g., Si wafers and the face of TEPC membranes). Swelling/deswelling properties of multilayers and gating properties of the multilayer-modified TEPC membranes were studied by measuring the flux of pH-adjusted deionized water. Large discontinuous changes in the transmembrane flux were observed, indicating that the multilayers within the cylindrical pores of TEPC membranes exhibit the discontinuous swelling/deswelling behavior observed previously for planar systems. The degree of swelling as estimated by simple models, however, showed that (PAH/PSS) multilayers in the confined geometry swelled to smaller extents compared to the same multilayers on planar substrates under the same conditions. Multilayer-modified membranes showed reversible gating properties as the pH condition of feed solution was alternated between pH 2.5 and 10.5. In situ atomic force microscopy (AFM) was used to visualize the closing of the pores as a function of time. The hysteretic gating property of the multilayer-modified TEPC membrane was utilized to achieve either a "closed" or "open" state at one pH condition depending on the pretreatment history, thereby enabling either the retention or passage of high-molecular weight polymers by varying the membrane pretreatment condition.

Journal Article↗

PubMed2006

All-nanoparticle thin-film coatings.

All-nanoparticle thin-film coatings that exhibit antireflection, antifogging (superhydrophilicity), and self-cleaning properties have been prepared via layer-by-layer deposition of TiO(2) and SiO(2) nanoparticles. The porosity and chemical composition of the coatings were determined using a simple method that is based on ellipsometry and does not require any assumptions about the refractive indices of the constituent nanoparticles. The presence of nanopores in the TiO(2)/SiO(2) nanoparticle coatings results in superhydrophilicity as well as antireflection properties. The superhydrophilicity of contaminated coatings could also be readily recovered and retained after ultraviolet irradiation.

Adsorption↗

PubMed2005

Antibacterial properties of Ag nanoparticle loaded multilayers and formation of magnetically directed antibacterial microparticles.

Antibacterial coatings based on hydrogen-bonded multilayers containing in situ synthesized Ag nanoparticles were created on planar surfaces and on magnetic colloidal particles. We report the antibacterial properties of these coatings, determined using a disk-diffusion (Kirby-Bauer) test, as a function of the film thickness and the concentration of Ag nanoparticles in the hydrogen-bonded multilayers. The zone of inhibition (ZoI) determined by the disk-diffusion test increases as the thickness of the multilayer film is increased. Results obtained for the values of the ZoI as a function of film thickness can be described adequately with a simple diffusion model (i.e., the square of the zone of inhibition (ZoI) depended linearly on the logarithm of the thickness of the silver-loaded films). This observation suggests that, in order to incrementally increase the ZoI, an exponentially increasing amount of Ag is required within the multilayers. In general, there was no statistically significant correlation between the zone of inhibition and the number of Ag loading and reduction cycles. The duration of sustained release of antibacterial Ag ions from these coatings, however, could be prolonged by increasing the total supply of zerovalent silver in the films via multiple loading and reduction cycles. These results indicate that the release of silver is controlled by an oxidation mechanism at the surface of the nanoparticles and that repeated loading and reduction of silver leads preferentially to growth of the existing silver nanoparticles in the film as opposed to nucleation of new Ag nanoparticles. We also show that magnetic microspheres coated with silver nanoparticle loaded hydrogen-bonded multilayer thin films can be used to deliver antibacterial agents to specific locations. The minimum inhibitory concentration (MIC) of nanocomposite coated microspheres was determined by the agar dilution technique: antibacterial magnetic microspheres with higher concentrations of Ag nanoparticles exhibited lower MIC values.

Acrylic Resins↗

PubMed2004

Bioinert solution-cross-linked hydrogen-bonded multilayers on colloidal particles.

Bioinert polyelectrolyte multilayers comprised of poly(acrylic acid) and polyacrylamide were deposited on colloidal particles (1.7 microm in diameter) at low pH conditions by layer-by-layer assembly using hydrogen-bonding interactions. The multilayer films were coated uniformly on the colloidal particles without causing any flocculation of the colloids, and the deposited films were subsequently cross-linked by a single treatment of a carbodiimide aqueous solution. The lightly cross-linked multilayer films show excellent stability at physiological conditions (pH 7.4, phosphate-buffered saline), whereas untreated multilayer films dissolved. The multilayer-coated surfaces, both on flat substrates and on colloidal particles, exhibit excellent resistance toward mammalian cell adhesion. With this new solution-based cross-linking method, bioinert H-bonded multilayer coatings offer potential for biomedical applications.

Acrylic Resins↗

PubMed2003

Identification and characterization of a novel cancer/testis antigen gene CAGE-1.

Serological analysis of cDNA expression library (SEREX) was employed to identify cancer-associated genes. By screening cDNA expression libraries with sera of patients with lung cancers, we identified a total of 49 genes that specifically reacted with the sera of patients with lung cancers. Among these, we characterized a novel gene with expression pattern similar to that of cancer/testis antigens. Its open reading frame is 1920 bp in size and encodes for putative protein composed of 639 amino acids. Southern blot analysis reveals that this gene exists as single copy. In vitro transcription/translation and Western blot analysis confirm that this gene encodes a protein of 73 kDa in size. The comparison of cDNA and genomic sequences reveals that it is composed of 11 exons and 10 introns. This gene displays testis-specific expression among normal tissues, and wide expression among various cancer tissues and cancer cell lines. A study using GFP fusion construct reveals mainly nuclear localization of CAGE-1 protein. The expression of this clone is relatively higher in cancer tissues compared with their surrounding non-cancerous tissues. This suggests that overexpression of CAGE-1 may be associated with the progression of tumor. Because of its association with cancer, this gene was named cancer-associated gene-1 (CAGE-1). Given the fact that several cancer/testis antigens reportedly induce cytolytic T lymphocyte (CTL) reactions, it is reasonable that this gene will be a valuable target for cancer immunotherapy. The exact functional role of CAGE-1 in tumorigenesis remains to be seen.

Amino Acid Sequence↗