PubMed Health⌕ Search

Biomedical subjects

David Milstein

Publications and source records attributed to David Milstein.

At least 19 recordsLinked to original sources
PubMed2007

Synthesis and characterisation of nonclassical ruthenium hydride complexes containing chelating bidentate and tridentate phosphine ligands.

The synthesis and characterisation of nonclassical ruthenium hydride complexes containing bidentate PP and tridentate PCP and PNP pincer-type ligands are described. The mononuclear and dinuclear ruthenium complexes presented have been synthesised in moderate to high yields by the direct hydrogenation route (one-pot synthesis) or in a two-step procedure. In both cases [Ru(cod)(metallyl)(2)] served as a readily available precursor. The influences of the coordination geometry and the ligand framework on the structure, binding, and chemical properties of the M--H(2) fragments were studied by X-ray crystal structure analysis, spectroscopic methods, and reactivity towards N(2), D(2), and deuterated solvents.

Journal Article↗
PubMed2007

Osmium-mediated C--H and C--C bond cleavage of a phenolic substrate: p-quinone methide and methylene arenium pincer complexes.

The diphosphine 2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)OH (1) reacts with [OsCl(2)(PPh(3))(3)] in presence of an excess of triethylamine to yield the isomeric para-quinone methide derivatives [Os{4-(CH(2))-1-(O)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))] (2 and 3), which differ in the positions of the mutually trans hydride and chloride ligands. Complex 2 reacts with CO to afford the dicarbonyl species [Os{1-(O)-2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(CO)(2)] (4), which results from hydride insertion into the quinonic double bond. Protonation of 2 and 3 leads to the formation of the methylene arenium derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))][OSO(2)CF(3)] (5 a). The diphosphine 1 reacts with [OsCl(2)(PPh(3))(3)] at 100 degrees C under H(2) to afford [Os{1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H(2))(PPh(3))] (6), a PCP pincer complex resulting formally from C(sp(2))--C(sp(3)) cleavage of the C--CH(3) group in 1. C--C hydrogenolysis resulting in the same complex is achieved by heating 2 under H(2) pressure. Reaction of the diphosphine substrate with [OsCl(2)(PPh(3))(3)] under H(2) at lower temperature allows the observation of a methylene arenium derivative resulting from C--H activation, [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(2)(H)] (7). This compound reacts with PPh(3) in toluene to afford the ionic derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))]Cl (5 b). X-ray diffraction studies have been carried out on compounds 2, 3, 4, 5 b, 6, and 7, which allows the study of the structural variations when going from methylene arenium to quinone methide derivatives.

Journal Article↗
PubMed2006

Synthesis and reactivity of the methylene arenium form of a benzyl cation, stabilized by complexation.

Benzyl cations are unstable intermediates involved in various chemical and biological processes. Two extreme resonance forms of these cations include positive charge localization at the methylene carbon or delocalization in the ring, the latter, nonaromatic form, termed "methylene arenium". The preparation of the discrete methylene arenium compound, stabilized by coordination to a metal (palladium) center, is described. It was fully characterized, including by X-ray diffraction. Reactivity patterns, resulting from charge distribution in the ring, were observed. Upon controlled release of the methylene arenium compound into solution, it demonstrates aromatic benzyl cation reactivity.

Benzene Derivatives↗
PubMed2006

Metal-ligand cooperation in C-H and H2 activation by an electron-rich PNP Ir(I) system: facile ligand dearomatization-aromatization as key steps.

Unusual reactions are reported, in which the aromatic PNP ligand (PNP = 2,6-bis-(di-tert-butylphosphinomethyl)pyridine) acts in concert with the metal in the activation of H2 and benzene, via facile aromatization/dearomatization processes of the ligand. A new, dearomatized electron-rich (PNP*)Ir(I) complex 2 (PNP* = deprotonated PNP) activates benzene to form the aromatic (PNP)Ir(I)Ph 4, which upon treatment with CO undergoes a surprising oxidation process to form (PNP*)Ir(III)(H)CO 6, involving proton migration from the ligand "arm" to the metal, with concomitant dearomatization. 4 undergoes stereoselective activation of H2 to exclusively form the trans-dihydride 7, rather than the expected cis-dihydride complex. Our evidence, including D-labeling, suggests the possibility that the Ir(I)-Ph complex is transformed to the dearomatized Ir(III)(Ph)(H) (independently prepared at low temperature), which may be the actual intermediate undergoing H2 activation.

Journal Article↗
PubMed2006

Electron-rich, bulky PNN-type ruthenium complexes: synthesis, characterization and catalysis of alcohol dehydrogenation.

Reaction of the electron-rich, bulky tridentate PNN ligand (PNN=2-di-tert-butylphosphinomethyl-6-diethylaminomethylpyridine) with Ru(PPh3)3Cl2 at 65 degrees C resulted in formation of the mononuclear dinitrogen complex (PNN)Ru(Cl)2N2 (minor) and the N2 bridged Ru(II) dinuclear complex [(PNN)Ru(Cl)2]2(micro-N2) (major). These complexes can be interconverted; passing argon through a solution of the mixture resulted in formation of pure . The cationic square-pyramidal [(PNN)Ru(PPh3)Cl]OTf was obtained by the reaction of complex with silver triflate followed by PPh3. Reaction of complex with CO yielded (PNN)Ru(CO)Cl2, which upon reaction with one equiv. of AgBF4 gave the cationic [(PNN)Ru(CO)Cl]BF4. The dicationic [(PNN)Ru(CO)(H2O)(acetone)](BF4)2 was obtained from with 2 equiv. of AgBF4 in acetone solution. Complexes , and were structurally characterized by X-ray crystallography. Complexes and upon addition of an equivalent of base, catalyzed the dehydrogenation of secondary alcohols to the corresponding ketones and primary alcohols to esters in good yields and high selectivity accompanied with the evolution of hydrogen gas.

Journal Article↗
PubMed2006

Selective sp3 C-H activation of ketones at the beta position by Ir(I). Origin of regioselectivity and water effect.

The reaction of the cationic (PNP)Ir(I)(cyclooctene) complex (1) (PNP = 2,6-bis-(di-tert-butylphosphinomethyl)pyridine) with 2-butanone or 3-pentanone results in the selective, quantitative activation of a beta C-H bond, yielding O,C-chelated complexes. Calculations show that the selectivity is both kinetically (because of steric reasons in the rate determingin step (RDS)) and thermodynamically controlled, the latter as a result of carbonyl oxygen coordination in the product. The RDS is formation of the eta2-C,H intermediates from the complexed ketone intermediates. Water has a strong influence on the regioselectivity, and in its presence, reaction of 1 with 2-butanone gives also the alpha terminal C-H activation product. Computational studies suggest that water can stabilize the terminal alpha C-H activation product by hydrogen bonding, forming a six-membered ring with the ketone, as experimentally observed in the X-ray structure of the acetonyl hydride aqua complex.

Journal Article↗
PubMed2006

Direct observation of reductive elimination of methyl iodide from a rhodium(III) pincer complex: the importance of sterics.

A rare case of directly observed alkyl halide reductive elimination from rhodium is reported. Treatment of the naphthyl-based PCP-type Rh(III) methyl complexes 2a,b [(C10H5(CH2PR2)2)Rh(CH3)(I)] (R = iPr 2a, R = tBu 2b) with CO resulted in facile reductive elimination of methyl iodide in the case of 2b, yielding the Rh(I) carbonyl complex [(C10H5(CH2PR2)2)Rh(CO)] 3b (R = tBu), while the less bulky 2a formed CO adducts and did not undergo reductive elimination, contrary to expectations based on electron density considerations. Moreover, 3b oxidatively added methyl iodide, while 3a did not. CD3I/CH3I exchange studies in the absence of CO indicate that reversible formation of (ligated) methyl iodide takes place in both systems. Subsequently, when CO is present, it displaces methyl iodide in the bulkier tBu system, whereas with the iPr system formation of the Rh(III) CO adducts is favored. Iodide dissociation followed by its attack on the rhodium-methyl group is unlikely.

Journal Article↗
PubMed2006

Metal-controlled reactivity of a pincer-type, sigma-coordinated naphthyl radical anion.

Reduction of the new, naphthalene-based pincer complex [(C10H5(CH2PiPr2)2)Rh(eta1-N2)] with potassium metal gave the corresponding sigma-coordinated naphthyl radical anion complex, with a ring-centered radical and no change in the formal metal oxidation state. This paramagnetic complex can be reoxidized to the diamagnetic one with [Cp2Fe][BF4], the structural integrity being retained. Unexpectedly, treatment of a THF solution of the reduced complex with water leads to the immediate evolution of dihydrogen, with reoxidation to the starting complex. This is in striking contrast with the well-known reactivity of the naphthide radical anion, which undergoes ring protonation by water to form 1,4-dihydronaphthalene and naphthalene in a 1:1 ratio.

Journal Article↗
PubMed2005

A general method for preparation of metal carbenes via solution- and polymer-based approaches.

A new general, synthetically simple, and safe method for the preparation of metal carbene complexes, which is based on diphenyl sulfonium salts as carbenoid precursors, has been developed, and its scope and applications were studied. In general, deprotonation of a sulfonium salt with a base results in a sulfur ylide, which, in turn, reacts with an appropriate metal precursor to give the corresponding metal carbene complex. Thus, starting from benzyldiphenylsulfonium salt, the complexes (PCX)Rh=CHPh (X = P, N) were prepared in quantitative yield. Syntheses of Grubbs' catalyst, (PCy(3))(2)Cl(2)Ru=CHPh, and of Werner's carbene, [Os(=CHPh)HCl(CO)(P(i)Pr(3))(2)], were achieved by this method. Novel trans-bisphosphine Rh and Ir carbenes, ((i)Pr(3)P)(2)(Cl)M=CHPh, which could not be prepared by other known methods, were synthesized by the sulfur ylide approach. The method is not limited to metal benzylidenes, as demonstrated by the preparation of the Ru vinyl-alkylidene, (PCy(3))(2)Cl(2)Ru=CH-CH=CH(2), methoxycarbonyl-alkylidene, (PCy(3))(2)Cl(2)Ru=CH(CO(2)Me), and alkylidene (PCy(3))(2)Cl(2)Ru=CH(CH(3)), (PCy(3))(2)Cl(2)Ru=CH(2) compounds. The problem of recycling of starting materials as well as the issue of facile purification of the product metal carbene complex were addressed by the synthesis of a polymer-supported diarylsulfide, the carrier of the carbenoid unit in the process. Based on the sulfur ylide route, a methodology for the synthesis of metallocarbenes anchored to a polymer via the carbene ligand, using a commercial Merrifield resin, was developed.

Journal Article↗
PubMed2005

Facile conversion of alcohols into esters and dihydrogen catalyzed by new ruthenium complexes.

An efficient, environmentally benign method for the preparation of esters from alcohols under mild, neutral conditions without the need for carboxylic acid derivatives and condensing agents was developed. Catalyst design, based on new Ru(II) hydrido carbonyl complexes incorporating electron-rich PNP and PNN ligands has resulted in the novel complex (I) which is an outstanding catalyst for the dehydrogenation of primary alcohols to esters and H(2) under neutral conditions.

Journal Article↗
PubMed2005

Reactivity of rhodium-triflate complexes with diphenylsilane: evidence for silylene intermediacy in stoichiometric and catalytic reactions.

Addition of Ph2SiH2 to [Rh(iPr3P)2(OTf)] (1) yielded the thermally unstable RhIII adduct [Rh(iPr3P)2(OTf)(H)(SiPh2H)] (2), which decomposed to [Rh(iPr3P)2(H)2(OTf)] (3), liberating (unobserved) silylene. The silylene was trapped by 1, resulting in the RhI-silyl complex [Rh(iPr3P)2(SiPh2OTf)]. Complex 3 was converted to 2 by addition of diphenylsilane, providing a basis for a possible catalytic cycle. The last reaction did not involve a RhI intermediate, as shown by a labeling study. Complex 1 catalyzed the dehydrogenative coupling of Ph2SiH2 to Ph2HSi--SiHPh2. A mechanism involving a silylene intermediate in this catalytic cycle is proposed. The mechanism is supported by complete lack of catalysis in the case of the tertiary silanes Ph2MeSiH and PhMe2SiH, and by a study of individual steps of the catalytic cycle. The outcome of the reaction of Ph2SiH2 with styrene in the presence of 1 depends on the complex/substrate ratio; under stoichiometric conditions olefin hydrogenation prevailed over hydrosilylation, whereas with excess of substrates hydrosilylation prevailed. Catalytic hydrosilylation resulted in double addition giving Ph2Si(CH2CH2Ph)2. Mechanistic aspects of the reported processes are discussed, and a new hydrosilylation mechanism based on silylene intermediacy is proposed.

Journal Article↗
PubMed2005

Pi-accepting-pincer rhodium complexes: an unusual coordination mode of PCP-type systems.

The novel pi-accepting, pincer-type ligand, dipyrrolylphoshinoxylene (DPyPX), is introduced. This ligand has the strongest pi-accepting phosphines used so far in the PCP family of ligands and this results in some unusual coordination chemistry. The rhodium(I) complex, [(DPyPX)Rh(CO)(PR3)] (4, R=Ph, Et, pyrrolyl) is prepared by treating the relevant [(DPyPX)Rh(PR3)] (3) complex with CO and is remarkably resistant to loss of either ligand. X-ray crystallographic analysis of complex 4 b (R=Et) reveals an unusual cisoid coordination of the PCP phosphine ligands. These observations are supported by density functional theory (DFT) calculations.

Journal Article↗
PubMed2004

New ligand systems incorporating two and three 4,4'-bipyridine units. Characterization of bi- and trimetallic rhodium and iridium complexes.

The synthesis of new ligand systems based on the bipyridine unit for bi- and trimetallic complexes, including a rare example of a chiral bimetallic complex, is presented. Ligands BBPX (bis-bipyridine-xylene, 3) and TBPBX (tris-bipyridine-bis-xylene, 4) were prepared in one step by reacting alpha,alpha'-dibromo-o-xylene (2) with 2 equiv of the monolithiated derivative of 4,4'-dimethyl-2,2'-bipyridine. Dilithium (S)-binaphtholate (5) reacted with 2 equiv of 4-bromomethyl-4'-methyl-2,2'-bipyridine (6), affording ligand (S)-BBPBINAP (bis-bipyridine-binaphtholate, 7). These ligands reacted cleanly with 1, 1.5, and 1 equiv of the rhodium dimer [Rh(2)Cl(2)(HD)(2)] (HD = 1,5-hexadiene), respectively. Chloride abstraction led to the isolation of the cationic complexes BBPX[Rh(HD)BF(4)](2) (8), TBPBX[Rh(HD)BF(4)](3) (10), and (S)-BBPBINAP[Rh(HD)BF(4)](2) (12). When BBPX (3), TBPBX (4), and (S)-BBPBINAP (7) were added to 2, 3, and 2 equiv of [Rh(NBD)(2)]BF(4) or [Rh(NBD)(CH(3)CN)(2)]BF(4) (NBD = norbornadiene), respectively, clean formation of BBPX[Rh(NBD)BF(4)](2) (9), TBPBX[Rh(NBD)BF(4)](3) (11), and (S)-BBPBINAP[Rh(NBD)BF(4)](2) (13) was observed. The neutral iridium complex (S)-BBPBINAP[IrCl(COD)](2) (14) was obtained by reaction of (S)-BBPBINAP (7) with 1 equiv of [Ir(2)Cl(2)(COD)(2)] (COD = cyclooctadiene). The complexes were fully characterized including X-ray structural studies of 8, 9, and 13, and preliminary studies on their catalytic activity were performed.

Journal Article↗
PubMed2004

Nucleophilic de-coordination and electrophilic regeneration of "hemilabile" pincer-type complexes: formation of anionic dialkyl, diaryl, and dihydride Pt(II) complexes bearing no stabilizing pi-acceptors.

Novel anionic dialkyl, diaryl, and dihydride platinum(II) complexes based on the new "long-arm" hemilabile PCN-type ligand C6H4[CH2P(tBu)2](CH2)2N(CH3)2 with the general formula Li+[Pt(PCN)(R)2]- (R=Me (4), Ph (6) and H (9)) were prepared by reaction of [Pt(PCN)(R)] complexes (obtained from the corresponding chlorides) with an equivalent of RLi, as a result of the opening of the chelate ring. Alkylating agents based on other metals produce less stable products. These anionic d8 complexes are thermally stable although they bear no stabilizing pi acceptors. They were characterized by 1H, 31P[1H], 13C, and 7Li NMR spectroscopy; complex 9 was also characterized by single crystal X-ray crystallography, showing that the Li+ ion is coordinated to the nitrogen atom of the open amine arm and to the hydride ligand (trans to the P atom) of a neighboring molecule (H--Li=2.15 A), resulting in a dimeric structure. Complexes 4 and 9 exhibit high nucleophilic reactivity, upon which the pincer complex is regenerated. Reaction of 4 with water, methyl iodide, and iodobenzene resulted in the neutral complex [Pt(PCN)(CH3)] (3) and methane, ethane, or toluene, respectively. Labeling studies indicate that the reaction proceeds by direct electrophilic attack on the metal center, rather than attack on the alkyl ligand. The anionic dihydride complex 9 reacted with water and methyl iodide to yield [Pt(PCN)(H)] (8) and H2 or methane, respectively.

Journal Article↗
PubMed2003

Metal-stabilized phenoxonium cation.

An unprecedented metal-stabilized phenoxonium cation was prepared by a process involving dearomatization of a phenoxy complex. The unique eta2 C=O-metal (iridium) coordination mode leaves the positive charge delocalized within the former aromatic ring. The X-ray structure and conversion into eta2 C=O-coordinated metal-quinone complex are described.

Cations↗