Biomedical subjects

David Tsukada

Publications and source records attributed to David Tsukada.

4 recordsLinked to original sources

PubMed2005

Distribution and mass inventory of total dichlorodiphenyldichloroethylene in the water column of the southern California bight.

A large-scale survey on the area and depth stratified distribution of dichlorodiphenyltrichloroethane (DDT; mainly p,p'- and o,p'-dichlorodiphenyldichloroethylene (DDE)) contamination in the water column of the Southern California Bight (SCB) was conducted in 2003-2004 using a solid-phase microextraction-based sampling technique. Dissolved-phase DDEs were clearly widespread, with the central SCB containing the highest levels, and the Palos Verdes Shelf sediments have remained the dominant source of DDT compounds to the SCB. The p,p'- and o,p'-DDE concentrations ranged from < 0.073 to 2.6 ng/L and from < 0.043 to 0.26 ng/L, respectively, clearly elevated with respect to measured values from across the globe. DDEs were hypothesized to have been transported from the historically contaminated zone on the Palos Verdes Shelf to other areas via a repeated process of sediment resuspension/deposition and short-range advection. Total mass inventories were estimated at 14 and 0.86 kg for p,p'- and o,p'-DDE, respectively, for the sampled area, resulting in p,p'- and o,p'-DDE mass inventories for the entire SCB of 230 and 14 kg, respectively. Furthermore, total fluxes of p,p'-DDE were estimated to be in the range of 0.8 to 2.3 metric tons per year. These results suggest that the SCB has been and continues to be a significant source of DDT contamination to the global oceans.

California↗

PubMed2005

Determination of polydimethylsiloxane-seawater distribution coefficients for polychlorinated biphenyls and chlorinated pesticides by solid-phase microextraction and gas chromatography-mass spectrometry.

Applications of solid-phase microextraction (SPME) in the measurement of very hydrophobic organic compounds (VHOCs) are limited, partly due to the difficulty of calibrating SPME fibers for VHOCs. This study used a static SPME strategy with a large sample volume (1.6 L) and a five-point calibration procedure to determine the distribution coefficients for a large suite of polychlorinated biphenyls (PCBs) and chlorinated pesticides between a polydimethylsiloxane (PDMS) phase (100 microm thickness) coated on a glass fiber and seawater. An extraction time of 12 days was deemed adequate for equilibrium calibration from kinetic experiments. Two groups of randomly selected fibers divided into three batches (up to nine fibers in each batch) were processed separately with two gas chromatography-mass spectrometry (GC-MS) systems. Matrix effects arising from losses of the analytes to glass container walls and stirring bars were corrected. Relative standard deviations within the same batch were generally smaller than those for the entire group. Furthermore, KfVf (Kf and Vf are the distribution coefficient of an analyte between the polymer-coated fiber and aqueous phase and the fiber volume, respectively) values determined with two GC-MS systems were statistically different. These results indicate the calibrated KfVf values were less affected by the random selection of SPME fibers than by other experimental conditions, and therefore average KfVf values may be used for the same type of commercially available SPME fibers. The relative accuracy of our calibration method was similar to that of a previous study [P. Mayer. W.H.J. Vaes, J.L.M. Hermens, Anal. Chem. 72 (2000) 459] employing different coating thickness and calibration procedure. The present study also obtained a bell-shaped relationship between log Kf and log Kow (octanol-water partition coefficient) for PCB congeners with the maximum log Kf corresponding to log Kow approximately 6.5. This bell-shaped relationship was attributed mainly to steric effects arising from the interplay between the PDMS thickness and molecular sizes of the target analytes.

Chemistry Techniques, Analytical↗

PubMed2004

Development of a solid-phase microextraction-based method for sampling of persistent chlorinated hydrocarbons in an urbanized coastal environment.

Solid-phase microextraction (SPME) has been used as an in situ sampling technique for a wide range of volatile organic chemicals, but SPME field sampling of nonvolatile organic pollutants has not been reported. This paper describes the development of an SPME-based sampling method employing a poly(dimethylsiloxane) (PDMS)-coated (100-microm thickness) fiber as the sorbent phase. The laboratory-calibrated PDMS-coated fibers were used to construct SPME samplers, and field tests were conducted at three coastal locations off southern California to determine the equilibrium sampling time and compare the efficacy of the SPME samplers with that of an Infiltrex 100 water pumping system (Axys Environmental Systems Ltd., Sidney, British Columbia, Canada). p,p'-DDE and o,p'-DDE were the components consistently detected in the SPME samples among 42 polychlorinated biphenyl congeners and 17 chlorinated pesticidestargeted. SPME samplers deployed attwo locations with moderate and high levels of contamination for 18 and 30 d, respectively, attained statistically identical concentrations of p,p'-DDE and o,p'-DDE. In addition, SPME samplers deployed for 23 and 43 d, respectively, at a location of low contamination also contained statistically identical concentrations of p,p'-DDE. These results indicate that equilibrium could be reached within 18 to 23 d. The concentrations of p,p'-DDE, o,p'-DDE, or p,p'-DDD obtained with the SPME samplers and the Infiltrex 100 system were virtually identical. In particular, two water column concentration profiles of p,p'-DDE and o,p'-DDE acquired by the SPME samplers at a highly contaminated site on the Palos Verdes Shelf overlapped with the profiles obtained by the Infiltrex 100 system in 1997. The field tests not only reveal the advantages of the SPME samplers compared to the Infiltrex 100 system and other integrative passive devices but also indicate the need to improve the sensitivity of the SPME-based sampling technique.

Chromatography, Gas↗

PubMed2002

In situ measurement of polychlorinated biphenyls in the waters of San Diego Bay, California.

Sediments of San Diego Bay (SDB) are known to contain elevated levels of polychlorinated biphenyls (PCBs). While numerous efforts have been made to monitor the spatial or temporal trends of contamination in SDB, no studies have been directed toward measurements of water column contamination. We measured PCB concentrations in the water column of SDB with an in situ sampling system. Except for one sample collected near the bay mouth, all other samples contained higher PCB concentrations than the 30-day average discharge limit established by the California Ocean Plan. The highest concentrations of water column PCBs occurred in the Central Bay, consistent with the previous findings that sediments in the Central Bay contained higher PCB levels than those in the North and South Bays. Based on the water volume of 2.2 x 10(8) cm3 at a lower water level, it was estimated that approximately 1,000 g of PCBs is transported out of SDB via tidal exchange annually. This indicates that water column transport driven by tidal exchange is a viable mechanism reducing PCB contamination within SDB.

California↗