Biomedical subjects

Don C Lamb

Publications and source records attributed to Don C Lamb.

10 recordsLinked to original sources

PubMed2006

Double-labelled HIV-1 particles for study of virus-cell interaction.

Human immunodeficiency virus (HIV) delivers its genome to a host cell through fusion of the viral envelope with a cellular membrane. While the viral and cellular proteins involved in entry have been analyzed in detail, the dynamics of virus-cell fusion are largely unknown. Single virus tracing (SVT) provides the unique opportunity to visualize viral particles in real time allowing direct observation of the dynamics of this stochastic process. For this purpose, we developed a double-coloured HIV derivative carrying a green fluorescent label attached to the viral matrix protein combined with a red label fused to the viral Vpr protein designed to distinguish between complete virions and subviral particles lacking MA after membrane fusion. We present here a detailed characterization of this novel tool together with exemplary live cell imaging studies, demonstrating its suitability for real-time analyses of HIV-cell interaction.

Biological Transport↗

PubMed2006

A new photostable terrylene diimide dye for applications in single molecule studies and membrane labeling.

A new terrylene diimide-based dye (WS-TDI) that is soluble in water has been synthesized, and its photophysical properties are characterized. WS-TDI forms nonfluorescing H-aggregates in water that show absorption bands being blue-shifted with respect to those of the fluorescing monomeric form. The ratio of monomeric WS-TDI to aggregated WS-TDI was determined to be 1 in 14 400 from fluorescence correlation spectroscopy (FCS) measurements, suggesting the presence of a large amount of soluble, nonfluorescent aggregates in water. The presence of a surfactant such as Pluronic P123 or CTAB leads to the disruption of the aggregates due to the formation of monomers in micelles. This is accompanied by a strong increase in fluorescence. A single molecule study of WS-TDI in polymeric films of PVA and PMMA reveals excellent photostability with respect to photobleaching, far above the photostability of other common water-soluble dyes, such as oxazine-1, sulforhodamine-B, and a water-soluble perylenediimide derivative. Furthermore, labeling of a single protein such as avidin is demonstrated by FCS and single molecule photostability measurements. The high tendency of WS-TDI to form nonfluorescent aggregates in water in connection with its high affinity to lipophilic environments is used for the fluorescence labeling of lipid membranes and membrane containing compartments such as artificial liposomes or endosomes in living HeLa cells. The superior fluorescence imaging quality of WS-TDI in such applications is demonstrated in comparison to other well-known membrane staining dyes such as Alexa647 conjugated with dextran and FM 4-64 lipophilic styryl dye.

Cell Membrane↗

PubMed2006

Conformational heterogeneity in RNA polymerase observed by single-pair FRET microscopy.

Kinetic, structural, and single-molecule transcription measurements suggest that RNA polymerase can adopt many different conformations during elongation. We have measured the geometry of the DNA and RNA in ternary elongation complexes using single-pair fluorescence resonance energy transfer. Six different synthetic transcription elongation complexes were constructed from DNA containing an artificial transcription bubble, an RNA primer, and core RNA polymerase from Escherichia coli. Two different RNA primers were used, an 8-mer and a 5'-extended 11-mer. Fluorescent dye labels were attached at one of three positions on the DNA and at the RNA primer 5'-end. Structurally, the upstream DNA runs perpendicular to the proposed RNA exit channel. Upon nucleoside-triphosphate addition, DNA/RNA hybrid separation occurs readily in the 11-mer complexes but not in the 8-mer complexes. Clear evidence was obtained that RNA polymerase exists in multiple conformations among which it fluctuates.

Computer Simulation↗

PubMed2006

A single-molecule Förster resonance energy transfer analysis of fluorescent DNA-protein conjugates for nanobiotechnology.

The development of nanobiotechnological devices requires the ability to build various components with nanometer accuracy. DNA is a well-established nanoscale building block that self assembles due to specific interactions that are encoded in its sequence. Recently, it has become possible to couple proteins to DNA, thereby expanding the capabilities of DNA for use with molecular photonics and bioelectronics. Here, we present the design and characterization of a supramolecular Förster resonance energy transfer (FRET) system by using a fluorescent protein bound to single-stranded DNA (ssDNA), a fluorophore attached to a second ssDNA molecule, and a complementary strand for hybridizing the two fluorophores together. The FRET efficiency was studied by using both ensemble and single-pair FRET measurements. The distance between the two fluorophores was determined from the single-pair FRET efficiency and could be described by a simple cylindrical model for the DNA. Hence, DNA can be used as a scaffold for positioning fluorescent proteins, as well as traditional fluorophores, with nanometer accuracy and shows great potential for use in the future of nanobiotechnology.

Biotechnology↗

PubMed2006

Single-pair FRET characterization of DNA tweezers.

The self-assembly properties of DNA make it an ideal choice for the construction of nanomachines such as DNA tweezers. Because nanomachines function as individual units, they need to be studied on the single-molecule level. From single-pair FRET investigations, we show that "open" tweezers exist in a single conformation with minimal FRET efficiency, whereas upon addition of a "closing strand", three conformations are observed, which are averaged out in ensemble measurements.

DNA↗

PubMed2005

Pulsed interleaved excitation.

In this article, we demonstrate the new method of pulsed interleaved excitation (PIE), which can be used to extend the capabilities of multiple-color fluorescence imaging, fluorescence cross-correlation spectroscopy (FCCS), and single-pair fluorescence resonance energy transfer (spFRET) measurements. In PIE, multiple excitation sources are interleaved such that the fluorescence emission generated from one pulse is complete before the next excitation pulse arrives. Hence, the excitation source for each detected photon is known. Typical repetition rates used for PIE are between approximately 1 and 50 MHz. PIE has many applications in various fluorescence methods. Using PIE, dual-color measurements can be performed with a single detector. In fluorescence imaging with multicolor detection, spectral cross talk can be removed, improving the contrast of the image. Using PIE with FCCS, we can eliminate spectral cross talk, making the method sensitive to weaker interactions. FCCS measurements with complexes that undergo FRET can be analyzed quantitatively. Under specific conditions, the FRET efficiency can be determined directly from the amplitude of the measured correlation functions without any calibration factors. We also show the application of PIE to spFRET measurements, where complexes that have low FRET efficiency can be distinguished from those that do not have an active acceptor.

Biophysics↗

PubMed2004

Structural dynamics of myoglobin: an infrared kinetic study of ligand migration in mutants YQR and YQRF.

Recombination of carbon monoxide to myoglobin mutants YQR and YQRF was studied using transient infrared absorption spectroscopy and Fourier transform infrared-temperature derivative spectroscopy (FTIR-TDS). Photoproduct states B, C', C" and D associated with ligands residing in different protein cavities have been identified. After photolysis, ligands migrate to primary docking site B and subsequently rebind or escape to a secondary site (C) within the Xe4 cavity. For YQR, a global analysis of the isothermal rebinding kinetics below 160 K and the TDS data reveal a correlation between the enthalpy barriers governing the two processes. Above 120 K, a protein conformational change in both YQR and YQRF converts photoproduct C' into C" with markedly slowed kinetics. Above approximately 180 K, ligands migrate to the proximal Xe1 site (D) and also exit into the solvent, from where they rebind in a bimolecular reaction.

Carbon Monoxide↗

PubMed2002

Ligand binding to somatostatin receptors induces receptor-specific oligomer formation in live cells.

Heptahelical receptors (HHRs) are generally thought to function as monomeric entities. Several HHRs such as somatostatin receptors (SSTRs), however, form homo- and heterooligomers when activated by ligand binding. By using dual fluorescent ligands simultaneously applied to live cells monotransfected with SSTR5 (R5) or SSTR1 (R1), or cotransfected with R5 and R1, we have analyzed the ligand receptor stoichiometry and aggregation states for the three receptor systems by fluorescence resonance energy transfer and fluorescence correlation spectroscopy. Both homo- and heterooligomeric receptors are occupied by two ligand molecules. We find that monomeric, homooligomeric, and heterooligomeric receptor species occur in the same cell cotransfected with two SSTRs, and that oligomerization of SSTRs is regulated by ligand binding by a selective process that is restricted to some (R5) but not other (R1) SSTR subtypes. We propose that induction by ligand of different oligomeric states of SSTRs represents a unique mechanism for generating signaling specificity not only within the SSTR family but more generally in the HHR family.

Animals↗

PubMed2002

Structural dynamics of myoglobin: ligand migration among protein cavities studied by Fourier transform infrared/temperature derivative spectroscopy.

Fourier transform infrared (FTIR) spectroscopy in the CO stretch bands combined with temperature derivative spectroscopy (TDS) was used to characterize intermediate states obtained by photolysis of two sperm whale mutant myoglobins, YQR (L29(B10)Y, H64(E7)Q, T67(E10)R) and YQRF (with an additional I107(G8)F replacement). Both mutants assume two different bound-state conformations, A(0) and A(3), which can be distinguished by their different CO bands near 1965 and 1933 cm(-1). They most likely originate from different conformations of the Gln-64 side chain. Within each A substate, a number of photoproduct states have been characterized on the basis of the temperature dependence of recombination in TDS experiments. Different locations and orientations of the ligand within the protein can be distinguished by the infrared spectra of the photolyzed CO. Recombination from the primary docking site, B, near the heme dominates below 50 K. Above 60 K, ligand rebinding occurs predominantly from a secondary docking site, C', in which the CO is trapped in the Xe4 cavity on the distal side, as shown by crystallography of photolyzed YQR and L29W myoglobin CO. Another kinetic state (C") has been identified from which rebinding occurs around 130 K. Moreover, a population appearing above the solvent glass transition at approximately 180 K (D state) is assigned to rebinding from the Xe1 cavity, as suggested by the photoproduct structure of the L29W sperm whale myoglobin mutant. For both the YQR and YQRF mutants, rebinding from the B sites near the heme differs for the two A substates, supporting the view that the return of the ligand from the C', C", and D states is not governed by the recombination barrier at the heme iron but rather by migration to the active site. Comparison of YQR and YQRF shows that access to the Xe4 site (C') is severely restricted by introduction of the bulky Phe side chain at position 107.

Animals↗

PubMed2002

The effect of ligand dynamics on heme electronic transition band III in myoglobin.

Band III is a near-infrared electronic transition at ~13,000 cm(-1) in heme proteins that has been studied extensively as a marker of protein conformational relaxation after photodissociation of the heme-bound ligand. To examine the influence of the heme pocket structure and ligand dynamics on band III, we have studied carbon monoxide recombination in a variety of myoglobin mutants after photolysis at 3 K using Fourier transform infrared temperature-derivative spectroscopy with monitoring in three spectral ranges, (1) band III, the mid-infrared region of (2) the heme-bound CO, and (3) the photodissociated CO. Here we present data on mutant myoglobins V68F and L29W, which both exhibit pronounced ligand movements at low temperature. From spectral and kinetic analyses in the mid-infrared, a small number of photoproduct populations can be distinguished, differing in their distal heme pocket conformations and/or CO locations. We have decomposed band III into its individual photoproduct contributions. Each photoproduct state exhibits a different "kinetic hole-burning" (KHB) effect, a coupling of the activation enthalpy for rebinding to the position of band III. The analysis reveals that the heme pocket structure and the photodissociated CO markedly affect the band III transition. A strong kinetic hole-burning effect results only when the CO ligand resides in the docking site on top of the heme group. Migration of CO away from the heme group leads to an overall blue shift of band III. Consequently, band III can be used as a sensitive tool to study ligand dynamics after photodissociation in heme proteins.

Animals↗