Biomedical subjects

Dorota Antos

Publications and source records attributed to Dorota Antos.

4 recordsLinked to original sources

PubMed2003

Concentration dependence of lumped mass transfer coefficients linear versus non-linear chromatography and isocratic versus gradient operation.

The general rate model provides a reliable platform to predict elution bands in both linear and non-linear chromatography provided the required equilibrium functions and the coefficients quantifying the mass transfer in and around the particles are available. If further the variation of the equilibrium functions with changes in the mobile phase composition is known, this model is also able to predict gradient elution chromatography. Significant disadvantages of the model are the need to specify three kinetic coefficients and the amount of computing time required for the numerical solution of the underlying equations. Thus, several simplified models have been suggested lumping mass transfer resistances together. In this work the accuracy of predicting chromatographic bands based on the numerical solution of two lumped models has been analyzed. Elution profiles calculated by (a) the transport-dispersive and (b) the equilibrium-dispersive models were compared between each other and with the solution of the more detailed general rate model. In the analysis performed both linear and non-linear chromatography was considered under isocratic and gradient conditions.

Chromatography↗

PubMed2003

Study of the competitive isotherm model and the mass transfer kinetics for a BET binary system.

The competitive adsorption behavior of the binary mixture of phenetole (ethoxy-benzene) and propyl benzoate in a reversed-phase system was investigated. The adsorption equilibrium data of the single-component systems were acquired by frontal analysis. The same data for binary mixtures were acquired by the perturbation method. For both compounds, the single-component isotherm data fit best to the multilayer BET model. The experimental overloaded band profiles are in excellent agreement with the profiles calculated with either the general rate model or the modified transport-dispersive models. The competitive adsorption data were modeled using the ideal adsorbed solution (IAS) theory. The numerical values of the coefficients were derived by fitting the retention times of the perturbation pulses to those calculated using the IAS theory compiled with the coherence conditions. Finally, the elution profiles of binary mixtures were recorded. They compared very well with those calculated. As a characteristic feature of this case, an unusual retainment effect of the chromatographic band of the more retained component by the less retained one was observed. The combination of the General Rate Model and the adsorption isotherm model allowed an accurate prediction of the band profiles.

Adsorption↗

PubMed2003

Modeling of preparative chromatography processes with slow intraparticle mass transport kinetics.

Mathematical modeling of the preparative chromatography process accompanied with complex intraparticle mass transport mechanism involving surface diffusion is discussed. As an experimental base for the analysis two steroid compounds, methyl esters of hydroxycholanic acids (bile acids), deoxycholic and cholic acids were selected. For these compounds surface diffusion kinetics were found to have a marked influence on the band broadening. The isocratic chromatography process was performed in a normal-phase preparative system with ternary mixture of solvents containing hexane, ethyl acetate and methanol as a modifier under different operating conditions, e.g., at various mobile phase compositions and inlet concentrations. The efficiency of the system was found to be dependent on the mass of sample injected as well as on the contents of the modifier. Such a phenomenon was suggested to originate from the contribution of the surface diffusion kinetics to the overall mass transport mechanism. For identifying the general trends and concentration dependencies of the surface diffusion coefficient the simplified approach was proposed. The set of chromatographic band profiles registered at different inlet concentration and mobile phase composition were used for determining the influence of the local solid-phase concentration on the mass transport mechanism. For the simulations the transport-dispersive model was used, in which all sources of mass transport resistances were lumped in the properly adjusted mass transport coefficient. The accuracy of this model was verified by comparing its predictions to the solutions of the general rate model.

Chromatography, Liquid↗

PubMed2002

Two-step solvent gradients in simulated moving bed chromatography. Numerical study for linear equilibria.

The application of gradients in simulated moving bed (SMB) chromatography has recently attracted interest as a method for further improving the performance of this continuous separation process. One possible implementation of gradients consists in setting the solvent strength in the desorbent stream higher than that in the feed stream. As a result, the components to be separated are more retained in the zones upstream of the feed position and more easily eluted in the zones downstream of the feed position. If a liquid mobile phase is used, gradients can be created by dosing different solvents into the feed and desorbent ports. In a closed-loop gradient SMB arrangement the solvent strength within the unit will depend on the two feed compositions and on the characteristic flow-rates of the process. In this work an equilibrium stage model describing a true moving bed process is used to analyze numerically the main features of a two-step gradient SMB process. The adsorption isotherms are assumed to be always linear under isocratic conditions. The relevant Henry constants depend in a nonlinear manner on the composition of the solvent. Based on numerical simulations the impact of the two inlet solvent compositions is demonstrated in terms of the size and shape of regions of applicable flow-rates. Different strategies of designing the process are discussed and compared with respect to maximizing productivities and minimizing desorbent requirements.

Chromatography, Liquid↗