PubMed Health⌕ Search

Biomedical subjects

F García-Godoy

Publications and source records attributed to F García-Godoy.

At least 73 records · Page 4Linked to original sources

Cleft lip and cleft palate in Santo Domingo.

The purpose of this study was to analyze the occurrence of isolated cleft lip (CL), cleft lip with cleft palate (CL+CP) and isolated cleft palate (CP) and their distribution according to sex and laterality in Santo Domingo, Dominican Republic, located in the Caribbean Archipelago. The sample consisted of 439 hospital records (204 males and 235 females) of patients attending a children's public hospital in Santo Domingo over the period of May 1973 to December 1976. Of all facial clefts, the highest percentage (36.4%) was presented by CL, followed by CP (32.1%) and CL+CP (31.4%). Of all facial clefts, males presented the highest percentage (53.5%). For both sexes, there was an equal number of cases with (17.54%) but more males had CL+CP (0.20 > P > 0.10) and more females presented CP (P < 0.001). The left-sided defects were almost twice as common as the right-sided defects. The ratio of unilateral clefts-to-bilateral clefts was 5.4:1.

Cleft Lip↗

A radiographic technique for maxillary third molars.

To obtain an accurate radiographic image of the maxillary third molars with roots and without the superimposition of the zygomatic arch is sometimes difficult. A simple, fast, and effective technique to obtain such an image is described. The technique could be useful also in the practice for handicapped patients as it requires little cooperation from the patient.

Humans↗

Caries-preventive effect of topical amine fluoride in children with high and low salivary levels of mutans streptococci.

The aim of the study was to assess the relationship between the salivary mutans streptococci (SMS) level and the effectiveness of a preventive intervention based on a biannual application of an amine fluoride solution (AmF). A total of 284 schoolchildren aged 6 years were recruited from eleven classes of a primary school in Milan and randomly assigned to an experimental (A) and a control group (B). SMS counts were obtained at baseline and caries incidence data (diseased, missing, filled teeth, DMFT) were recorded every 6 months for 5 years. The participants of the experimental group received application of an AmF 1% F(-) solution twice a year on the enamel surfaces of the first permanent molars for 5 years. Control group subjects received application of a placebo solution twice a year on the enamel surfaces of the first molars for the same period. The mean DMFT in the experimental and control groups were 0.56 and 0.22, respectively, at the beginning and 1.14 and 2.06 after 5 years. SMS data allowed children to be classified into low- (0-10(5) CFU/ml of saliva) and high- (>10(5) CFU/ml of saliva) SMS subjects. Survival analysis, performed on the first molar data split by SMS group, showed a significantly higher caries reduction in low-SMS experimental group subjects compared to low-SMS control group subjects after 5 years. No significant differences were found between the two high-SMS experimental and control groups. These findings indicate that the preventive effects of the treatment were significantly lower in subjects who had high SMS. It is concluded that the effectiveness of a simple and economical topical fluoride intervention applicable at a community level is significantly influenced by the SMS level of the subjects involved. Simple AmF preventive interventions, applied on low-SMS subjects, can give significant results in terms of caries reduction.

Administration, Topical↗

Mechanical properties of compomer restorative materials.

The purpose of this study was to measure the compressive strength, flexural strength, microhardness, and surface roughness of three compomers (Compoglass, Dyract, and Hytac) and compare the values to the ones obtained for a resin-modified glass-ionomer cement (Vitremer) and a resin composite (Z100). All materials were handled according to the manufacturers' instructions. There was a significant difference (P < 0.01) among Vitremer, Hytac and Z100 composite with regard to yield strength. Vitremer values were lower than for Hytac, which were lower than for Z100. The yield strength values for Compoglass and Dyract were significantly lower than for Hytac and Z100 composite and significantly higher than for Vitremer (P < 0.01). There was no significant difference in the strain at yield among Vitremer, Hytac, and Z100, but their values were significantly higher than for Compoglass and Dyract (P < 0.01). The flexural strength data displayed a significant difference between Vitremer and Hytac (P < 0.05). Z100 was significantly stronger than the other products tested. The values of strain at break for Vitremer, Hytac, and Z100 were significantly lower than for Compoglass and Dyract (P < 0.01). The compressive strength results showed significantly higher values for Dyract, Compoglass, and Hytac than for Vitremer (P < 0.01). Z100 displayed higher values than the other products tested (P < 0.01). Hytac strength was significantly higher than for Dyract (P < 0.01). The microhardness of Compoglass and Dyract was not significantly different (P < 0.05). Hytac displayed microhardness values higher than for Vitremer, Compoglass, and Dyract (P < 0.01). However, all products tested showed values significantly lower than for Z100 (P < 0.01). The surface roughness values for Compoglass, Dyract, Hytac, and Z100 were not significantly different. Vitremer displayed a significantly higher value than Dyract, Hytac, and Z100 (P < 0.05).

Analysis of Variance↗

Fracture strength of adhesively restored pulpotomized primary molars.

PURPOSE: To evaluate the cuspal fracture resistance of primary teeth restored with different adhesive techniques. METHODS: Eighty primary molars were selected for pulpotomy preparations. The molars were matched according to molar type (upper or lower, 1st or 2nd), and divided into four groups: Group 1: Pulpotomy cavity restored with IRM, Dispersalloy amalgam (Control); Group 2: IRM, Hydroxyline, Amalgambond Plus and Dispersalloy; Group 3: IRM, Hydroxyline, Prime & Bond 2.1 and Dyract; Group 4: IRM, Hydroxyline, Single Bond and Z100 resin composite. In Groups 2,3 & 4, Hydroxyline was placed over the IRM to avoid direct contact of the adhesives and resin with the IRM. All specimens were thermocycled (1000 cycles, 5-55 degrees C), and mounted in acrylic 2 mm apical to the CEJ. The molars were then tested for cuspal fracture strength using an Instron machine with tapered steel balls made to match the occlusal area of the primary molars tested. Repeated measures ANOVA and paired t-test were used to test the statistical significance of the results. RESULTS: Mean fracture loads in Newtons + S.D.) were as follows: G1: 1087 + 284; G2: 1371 + 434; G3: 1336 + 320; G4: 1404 + 312. The three bonded procedures significantly (P < 0.001) increased the resistance of the primary molars to fracture compared to the control group. There was no significant difference between the three bonded procedures. CONCLUSIONS: Bonded restorations of pulpotomized primary molars may be an alternative restorative procedure to stainless steel crowns.

Acid Etching, Dental↗

Compomers adaptation to Class I and V cavities in permanent teeth.

This study evaluated the adaptation of Compoglass, Dyract and Hytac to Class I and V cavities and the effect of etching on that adaptation. Sixty molars were used, divided for the three compomers used, which were subdivided for Class I and V and redivided into etched and nonetched cavities (5 each). Standard Class I and V cavities were prepared. The adhesives were applied and the cavities restored with the compomers. The restoration was finished and the cavosurface margins examined under the light microscope for any gap formation. The restored cavity was sectioned in two halves, which were fixed in glutaraldehyde and polished. The restoration-tooth interface was examined under the light microscope for any existent gap. Then one half from each tooth was prepared for SEM examination. The results revealed good adaptation of the compomers at the cavosurface margins except nonetched Class V cavities restored with Dyract. Restorations in Class V were more adapted than Class 1. Dyract and Compoglass showed better adaptation inside the cavity than Hytac. Cementum wall displayed good adaptation with all restorative materials. Etched cavities showed consistent hybrid layer formation whereas nonetched cavities showed interrupted hybrid layer with poor resin penetration.

Acid Etching, Dental↗