PubMed Health⌕ Search

Biomedical subjects

F Lescure

Publications and source records attributed to F Lescure.

At least 19 recordsLinked to original sources
PubMed1999

Taste masking as a consequence of the organisation of powder mixes.

Usually, chemical or technological operations are used to mask the taste of unpleasant-tasting drugs. To reduce the development cost of such drugs, we propose a new approach which does not require the modification of the existing formulation nor the use of additional costly technological operations. Different particle size fractions of two unpleasant-tasting drugs (niflumic acid and ibuprofen) were blended in binary mixes with different particle size fractions of two non-tasting excipients (ethyl cellulose and hydroxypropyl methylcellulose). By selecting the appropriate mixes of identical composition but different organisations, as predicted from surface energy data, it was possible to use the different organisations to modify the taste of the mixes for a panel of 10 healthy volunteers.

Adolescent↗
PubMed1998

Can the organization of a binary mix be predicted from the surface energy, cohesion parameter and particle size of its components?

PURPOSE: The aim of this study was to relate the organization of several binary mixes with three physical parameters (surface energy, cohesion parameter, and particle size) of various materials blended with each other. METHODS: Four pharmaceutical compounds were selected for their surface energies and cohesion parameters. Binary mixes were prepared from different sieved fractions. The frequency and nature of the interactions between the particles were observed by scanning electron microscopy. RESULTS: As expected, interactions were determined by both the energetics and the relative particle size of the two compounds blended, the latter determining the mode of interaction. However, particle size was not the only factor influencing the organization of the blends as, sometimes, small particles of a material would not adhere to the coarser particles of the other. Thus, a surface energy derived parameter ¿(B/A)lambda - (A/B)lambda¿ appears to be a valuable estimating tool of the potentiality of interaction between the particles blended. No correlation between the cohesion parameters of the compounds and the organization of the resulting blends could be found. CONCLUSIONS: Surface energy and particle size play a major role in the organization of a binary blend. However, they cannot explain separately the interactions observed between the fractions blended as reliable predictions require the use of both characteristics.

Adhesiveness↗
PubMed1997

The expanded Hansen approach to solubility parameters. Paracetamol and citric acid in individual solvents.

In this study two solubility-parameter models have been compared using as dependent variables the logarithm of the mole fraction solubility, lnX2e, and ln(alpha)/U (originally used in the extended Hansen method), where alpha is the activity coefficient and U is a function of the molar volume of the solute and the volume fraction of the solvent. The results show for the first time the proton-donor and -acceptor hydrogen-bonding capacities of paracetamol, as measured by the acidic and basic partial-solubility parameters. The influence of solvents on the differential scanning calorimetry (DSC) pattern of the solid phases was also studied in relation to the solubility models tested. Citric acid was chosen as a test substance because of its high acidity and its proton donor capacity to form hydrogen bonds with basic solvents. The partial acidic and basic solubility parameters obtained from multiple regression were consistent with this property, validating the model chosen. The results show that the more direct lnX2e variable was more suitable for fitting both models, and the four-parameter model seemed better for describing the interactions between solvent and solute.

Acetaminophen↗
PubMed1996

Immunochemical characterization of antibody-coated nanoparticles.

A new method using surface plasmon resonance (SPR) through the BIAcore was used to demonstrate the specific interaction between an anti-CD4 monoclonal antibody (IOT4a), adsorbed on poly(methylidene malonate 2.1.2) (PMM 2.1.2) nanoparticles, and the CD4 molecule. The results obtained were compared with the interaction of the same immunonanoparticles with rabbit anti-mouse Fc antibodies. The molar ratio (Fc)/(Fab) was 1, suggesting that the same number of epitopes on the Fc and the Fab fragments were accessible after IOT4a adsorption onto nanoparticles. Comparing the observed association rates of free antibody and antibody adsorbed on nanoparticles, the number of molecules of IOT4a antibody on PMM 2.1.2 nanoparticles was estimated as between 2.6 and 3 per nanoparticle. The properties of the antibody-coated nanoparticles are compatible with their use as antibody-targeted pharmacophores.

Adsorption↗
PubMed1996

Folding of the HDV antigenomic ribozyme pseudoknot structure deduced from long-range photocrosslinks.

A trans-acting system has been designed in order to explore the three-dimensional structure of the anti-genomic HDV ribozyme. In this system, the substrate (SANT) is associated by base-pairing to the catalytic RNA (RzANT) forming helix H1. RzANT is able to cleave specifically the RNA substrate as well as a deoxysubstrate analogue containing a single ribocytidine at the cleavage site (position -1). This demonstrates that such deoxysubstrate analogues are valuable tools for structural studies of this ribozyme domain. They form however weak complexes with RzANT which is due in part to their ability to fold as stable hairpins unlike the RNA substrate. Using a set of full deoxy or of mixed deoxy-ribo substrate analogues site-specific substituted with the photoaffinity probe deoxy-4-thiouridine, ds4U, at a defined position, we were able to determine a number of long range contacts between the substrate and the ribozyme core. In particular, crosslinks between substrate position -1 and position -2 with residues C15, G19 and C67, thought to be involved in the ribozyme catalytic site, were detected. A three dimensional model of the antigenomic ribozyme system, derived from the structure proposed by Tanner et al. [Current Biol (1994) 4, 488-498] for the genomic system was constructed. Apart from residue deletion or insertion, only minor accommodations were needed to account for all photocrosslinks but one which is attributed to an alternative hybridization of the substrate with the ribozyme. This study therefore further supports the structure proposed by Tanner et al. for the pseudoknot model.

Base Sequence↗
PubMed1996

Influence of surface free energies and cohesion parameters on pharmaceutical material interaction parameters-theoretical simulations.

PURPOSE: The aim of this study was to perform simulations of the influence of surface free energies and cohesion parameters on various interaction parameters within binary systems. METHODS: Using predictive equations derived from surface free energies and cohesion parameters originally proposed by Wu (2, 3) and by Rowe (4), values of interfacial tension, spreading and reduced spreading coefficients, interaction parameter and strength of interaction were simulated by means of a data processor. The influence of polar and disperse fractions of the two interacting materials was also examined. RESULTS: From the simulations, boundary conditions could be drawn: minimum interfacial tension, positive spreading coefficient, reduced spreading coefficient superior to unity, maximum value of the interaction parameter or of the strength of interaction. CONCLUSIONS: Simulations of the various parameters will help the formulator to select proper materials, eg. an agent that will efficiently bind some powdered substrate, a film-forming agent that will properly coat given cores or a material that will enhibit high interaction with a substrate.

Biocompatible Materials↗
PubMed1995

Analysis of human CD4-antibody interaction using the BIAcore system.

Interaction between CD4 cell surface protein and HIV-bearing gp120 has been described as the initial step for HIV entry into host cells. Some anti-CD4 antibodies were shown to inhibit this interaction. Biosensor studies using the BIAcore were performed to determine kinetic and thermodynamic parameters of the interaction of one of these antibodies (i.e. IOT4a, clone 13B8-2) with immobilized recombinant soluble CD4 (rsCD4). A non-linear regression method was used to analyze the sensorgrams, showing the existence of a double exponential time curve. A KA of 5.2 x 10(7) M-1 was calculated at 25 degrees C. The complex formation was exothermic (-4.5 kcal.mol-1( and entropically positive (+20 cal.mol-1.K-1). The reaction rate (0.234 x 10(5) M-1.s-1 at 25 degrees C) as well as the enthalpy change of the activated complex (+9.7 kcal.mol-1) are not compatible with a diffusion controlled reaction. The thermodynamic values calculated from equilibrium data corresponded to those calculated from kinetic data confirming the validity of the theoretical approach. As for most antigen-antibody interactions, complex formation was enthalpy driven. The overall positive entropy contribution to the stabilization of the complex is in contrast to that observed for the lysozyme-anti-lysozyme model and is probably due to electrostatic interaction between the epitope and the antibody combining site.

Antibodies, Monoclonal↗
PubMed1995

In vitro and in vivo evaluation of progesterone implants based on new biodegradable poly(glutamic and glutamate esters) copolymers.

New biodegradable polypeptidic copolymers of glutamic acid and tert-butyloxycarbonylmethyl glutamate were evaluated as implantable drug delivery systems. Three copolymers varying in degrees of esterification, which is inversely proportional to the number of glutamic residues, were selected for their range of hydrophilicity and biodegradation rates. Progesterone-containing implants were then prepared by means of an extrusion process and both in vitro and in vivo evaluations were performed. The effects of drug loading, nature, and pH of release medium were investigated. In vitro/in vivo correlations were established for some types of implants. Finally, mathematical fitting of the data, using published models, helped to better understand the mechanisms governing release.

Animals↗
PubMed1994

Preparation and characterization of novel poly(methylidene malonate 2.1.2.)-made nanoparticles.

Poly(methylidene malonate 2.1.2.) (PMM 2.1.2.) nanoparticles were prepared in phosphate buffer through emulsion polymerization of monomeric units; the kinetics of the reaction was monitored by spectrophotometry at 400 nm. Average nanoparticle sizes, molecular weights, and biodegradability of this potential drug carrier were determined under various conditions. As previously demonstrated for other similar monomers, i.e. IHCA or IBCA, pH influenced the physico-chemical characteristics of the nanoparticles obtained. Ethanol release from the ester-bearing side chains indicated that the polymers were susceptible to hydrolysis when incubated in basic pH or in rat plasma. A secondary degradation pathway, yielding formaldehyde through a reverse Knoevenagel's reaction, was minimal. Cytotoxicity studies of this new vector, in vitro, against L929 fibroblast cells demonstrated that PMM 2.1.2. nanoparticles were better tolerated than other poly(alkylcyanoacrylate) (PACA) carriers. Pharmacokinetic studies were also carried out to observe the fate of 14C-labelled PMM 2.1.2. nanoparticles after intravenous administration to rats. Forty eight hour post-injection, more than 80% of the radioactivity was recovered in urine and faeces. The body distribution of the polymer was estimated by measuring the radioactivity associated with liver, spleen, lung and kidneys. Five minutes after injection, a maximum of 24 +/- 2% of the total radioactivity was detected in the liver and less than 0.4% in the spleen. The liver-associated radioactivity decreased according to a biphasic profile and less than 8% of the total radioactivity remained after 6 days.

Animals↗
PubMed1992

Long-term histopathological study of new polypeptidic biomaterials.

The long-term histopathological evaluation of a new class of synthetic polypeptides, the poly(tert-butyloxycarbonylmethyl glutamates), as implantable drug delivery systems is addressed. This evaluation was performed in rat muscles over one year. The histological analysis included the measurement of many parameters, such as the type and thickness of the collagen capsule. The influence of the presence of progesterone, the selected active drug, could also be monitored over time.

Animals↗
PubMed1991

Self-cleavage of a 71 nucleotide-long ribozyme derived from hepatitis delta virus genomic RNA.

Self-cleavage efficiency of ribozymes derived from hepatitis delta virus (HDV) has been shown to depend on the RNA structure, which in turn may be determined by the length of the considered sequences. Here we describe the construction and functional analysis of a 71 nucleotide-long RNA genomic fragment, Rz71, which carries an 18 nucleotide deletion in a very stable GC-rich stem-loop (stem IV), predicted to be present in several computer-derived secondary structure models. Rz71 is able to undergo self-cleavage under non-denaturing conditions (the t1/2 of the reaction at 37 degrees C is 3 min). The deletion, however, is not neutral, since under the same conditions the non-deleted ribozyme cleaves to 50% in less than 15 sec. Therefore, stem-loop IV seems to play a structural role, not being directly involved in the catalytic reaction, but contributing to the correct positioning of the catalytic core of the HDV ribozyme. Rz71 is the smallest self-cleaving sub-fragment of HDV genomic RNA reported so far.

Base Sequence↗
PubMed1989

Acute histopathological response to a new biodegradable polypeptidic polymer for implantable drug delivery system.

This article deals with the in vivo evaluation of a new class of synthetic polypeptides, the poly[(tert-butyloxycarbonylmethyl) glutamates], POMEG, as an injectable or implantable drug delivery system. Three different polymers, varying in their degree of esterification, were extruded either with or without progesterone, and finally implanted in rats up to 14 days. Histologic evaluation of the implant sites show evidence of the good biocompatibility of these polymers. In addition, the description of their in vivo behavior, based on microscopic observation of the implanted POMEG rods, enables one to appreciate their potential as a drug delivery system for short- or long-term therapy.

Animals↗
PubMed1989

[Use of principles of iontophoresis and electrophoresis for controlled release of medical substances].

The present review describes work done over the past twenty years on the controlled release of drugs using iontophoresis or electrophoresis techniques. Following a description of therapeutic applications, in vivo and in vitro studies have been discussed with emphasis on the potentials of such techniques to control drug release. Different mathematical models have been reviewed and an attempt has been made to combine them to explain the various configurations of systems currently used.

Chemistry, Pharmaceutical↗