PubMed Health⌕ Search

Biomedical subjects

F Tjerneld

Publications and source records attributed to F Tjerneld.

12 recordsLinked to original sources
PubMed1992

Interactions in affinity partition studied using fluorescence spectroscopy.

Fluorescence titration has been used to determine the binding constant and number of binding sites for the textile triazine dye Procion Yellow HE-3G to lactate dehydrogenase from rabbit muscle (E.C. 1.1.1.27). Triazine dye was either free in solution or attached to one of the polymer carriers, polyethylene glycol or dextran. Titrations were performed in solutions of buffer, dextran, and polyethylene glycol. Aqueous two-phase systems composed of polyethylene glycol and dextran were prepared and the binding constant and number of binding sites for ligand polyethylene glycol-Procion Yellow to lactate dehydrogenase were determined in both upper and lower phases of these systems. Affinity partition of lactate dehydrogenase in a PEG-dextran system was also performed using PEG-Procion Yellow as ligand, and partition coefficients of lactate dehydrogenase showed good agreement with theoretical partition coefficients calculated from the binding constant and number of binding sites obtained from fluorescence titration. The advantage of using fluorescence titration to determine affinity of a polymer ligand for a protein is that measurement of binding strength can be made in the actual environment encountered by protein-ligand complex during the purification process.

Algorithms↗
PubMed1992

Synthesis of dye conjugates of ethylene oxide-propylene oxide copolymers and application in temperature-induced phase partitioning.

Synthesis of conjugates of the ethylene oxide/propylene oxide copolymer UCON 50-HB-5100 and the triazine dyes Cibacron Blue F3G-A and Procion Yellow HE-3G is described. The UCON-dye conjugate of Procion Yellow HE-3G is used as a ligand for affinity partitioning of glucose-6-phosphate dehydrogenase from bakers' yeast. The enzyme is first partitioned in a two-phase system composed of UCON, UCON-ligand and dextran, and the two phases isolated in separate containers. A small amount of salt is then added to the upper phase, which contains the UCON-ligand-enzyme complex, and the temperature increased above the cloud point of the UCON polymer to give a new two-phase system. The new two-phase system consists of an upper salt/water phase containing free enzyme and a lower UCON/water phase containing free UCON-ligand. Temperature-induced phase partitioning is thus seen to be of much assistance in dissociating enzyme-ligand complex, recovering enzyme and recycling UCON-ligand.

Chemical Phenomena↗
PubMed1991

Enzyme purification using temperature-induced phase formation.

A new type of aqueous two-phase system composed of an ethylene oxide and propylene oxide random co-polymer, UCON 50-HB-5100, as the upper phase polymer and either dextran or hydroxypropyl starch as the lower phase polymer has been characterized and used to purify 3-phosphoglycerate kinase (EC 2.7.2.3) and hexokinase (EC 2.7.1.1) from bakers' yeast. The UCON 50-HB-5100 polymer has a cloud point of 55 degrees C at which temperature it phase separates from water. This cloud point can be lowered to 40 degrees C by the addition of 0.2 M sodium sulfate salt. The low cloud point of this UCON polymer makes it possible to obtain the target enzymes in a water and buffer solution, and to recover and recycle the UCON 50-HB-5100 polymer. The phase diagrams for the systems UCON 50-HB-5100/Dextran T500 and UCON 50-HB-5100/hydroxypropyl starch have been determined. Yeast homogenate was first partitioned in a system composed of a top phase containing UCON 50-HB-5100 and a bottom phase containing either dextran or hydroxypropyl starch. The top phase containing the enzyme free of cell debris was removed and the temperature increased above the cloud point of the UCON until a new two phase system composed of water as the top phase and a concentrated liquid UCON 50-HB-5100 bottom phase was formed. The water phase containing the enzyme was removed and the bottom phase containing the UCON 50-HB-5100 could be recycled to perform a second extraction.

Hexokinase↗
PubMed1991

Preparation of benzoyl dextran and its use in aqueous two-phase systems.

The graft modification of dextran with benzoyl groups has been studied. The factors that affect the degree of substitution of benzoyl dextran were investigated. Phase diagrams for aqueous two-phase systems composed of polyethylene glycol/benzoyl dextran and dextran/benzoyl dextran have been determined. Phase separation was also obtained in aqueous solution of two benzoyl dextran polymers with different degrees of substitution. A four-phase system was obtained with a mixture of polyethylene glycol, dextran and two kinds of benzoyl dextrans. The partitioning of methylene blue and a Procion yellow HE-3G dextran derivative were studied in polyethylene glycol/benzoyl dextran and dextran/benzoyl dextran two-phase systems and in systems of two benzoyl dextrans differing in degree of substitution. The proteins bovine serum albumin and glucose-6-phosphate dehydrogenase were partitioned in polyethylene glycol/benzoyl dextran aqueous two-phase systems and the effect of the degree of substitution of benzoyl dextran was studied. Chlorella pyrenoidosa, thylakoid membrane vesicles, plasma membrane vesicles and chloroplasts were partitioned in polyethylene glycol/benzoyl dextran and dextran/benzoyl dextran two-phase systems, and in a polyethylene glycol/dextran/benzoyl dextran four-phase system.

Cell Membrane↗
PubMed1990

Partition of macromolecules and cell particles in aqueous two-phase systems based on hydroxypropyl starch and poly(ethylene glycol).

The partition behavior of proteins, nucleic acids, cell membranes, cell organelles and whole cells has been studied in liquid-liquid two-phase systems composed of water, poly-(ethylene glycol), and an hydroxypropyl starch. The properties of the systems are in many respects comparable with the traditional poly(ethylene glycol)-dextran systems, but the cost is reduced to around one-fifth.

Cell Fractionation↗
PubMed1990

Separation processes in biotechnology. Aqueous two-phase separations.

Aqueous two-phase systems are useful for separation of a wide range of water-compatible substances (from peptides to cells). The selectivity of the separation normally increases with the size of the partitioned molecules or particles. The partition and separation capacity can be influenced in a number of ways, including electric charge, hydrophobicity, or specific ligand binding. Because of the simpleness in operation and high capacity, aqueous two-phase systems are well suited for large-scale purification of biomaterials such as enzymes and other specific proteins.

Animals↗
PubMed1990

Aqueous two-phase systems for biotechnical use.

The different kinds of aqueous two-phase systems for accepted or potential use in biotechnology are summarized. Some properties of interest for the extractive use are discussed.

Biotechnology↗
PubMed1978

Linear dichroism studies of binding site structures in solution. Complexes between DNA and basic arylmethane dyes.

The interaction between B-form DNA and twelve cationic triaryl-methane dyes was studied with respect to optical properties and stabilities, using linear dichroism (LD) and aqueous two-phase partition techniques. Monovalent dyes derived from crystal violet as a rule form a single strong complex (K1 ca 10(5) M-1; site density per nucleotide base n1 ca 0.1 at 0.1M ionic strength) in which the plane of the dye is at an angle of less than 50 degrees to the local DNA helix axis. The complex with fuchsin is weaker (10(4) M-1) but can be explained by a similar orientation. For some of the dyes (those with pseudo-C2v symmetry) the angular orientations of two molecule-fixed axes can be obtained. For the divalent methyl green a second complex appears to be formed at low ionic strength. Methyl green (and to some extent 2-thiophene green and malachite green) show exciton splitting in the LD spectrum and circular dichroism assignable to exciton coupling between transition dipoles roughly parallel to the helical strands, indicating a dye-dye interaction. The optical data, supported by fitting experiments with space-filling models, suggests a general structure for the binding site. The dye is not intercalated but is bound to exposed hydrophobic regions in the major groove. The ligand is in part (the charged amino groups) in contact with the phosphoribose chain but its main surface lies against the hydrophobic base-pair stack. For a diphenylmethane dye, Michler's hydro blue, a perpendicular orientation was observed, possibly due to intercalation.

Binding Sites↗
PubMed1976

High-sensitivity linear dichroism as a tool for equilibrium analysis in biochemistry. Stability constant of DNA--ethidiumbromide complex.

A stoichiometrical application of a sensitive method for linear dichroism (LD) detection is suggested for biochemical purposes. The complex formation between a binding site on a polynucleotide and a ligand may be studied with high precision if the following conditions are fulfilled: (1) The polymer can be given a fixed degree of orientation. (2) The site has a specific orientation with respect to the orientation axis of the polymer (e.g., intercalation). (3) The ligand has an anisotropic optical absorption property. The method was applied to studying the complex between DNA and ethidiumbromide, which was detected by LD with precision of +/- 0.5 X 10(-7) M in a 4 X 10(-4) M DNA solution, i.e., 0.1% occupation of the total site concentration can be detected. The complexation could be explained by a single type of site (n = 0.14 +/- 0.01 sites per nucleotide residue) and a stability constant K1 = (2.5 +/- 1) X 10(5) M-1 at 0.2 M ionic strength. From the specific LD an average angle 60 degrees was concluded between the helix axis and the long axis of the ethidiumbromide molecule. This value formally contradicts the Watson-Crick model or the intercalation model but may be explained by extension and deformation effects on the xhain by the flow.

Binding Sites↗