Degradable polyelectrolyte capsules filled with oligonucleotide sequences.
Explore the source record for details and available documents.
Drug Carriers↗
Biomedical subjects
Frank Caruso
Publications and source records attributed to Frank Caruso.
Approaches to quantifying and visualizing polyelectrolyte multilayer film formation on particles.
Colloidal particles prepared by using the layer-by-layer technique are increasingly finding application in diagnostics, drug delivery, and sensing. Herein, we outline methods for applying three established techniques, confocal laser scanning microscopy (CLSM), flow cytometry, and differential interference contrast (DIC) microscopy, to characterize ultrathin films of poly(styrenesulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) assembled on silica particles. Both CLSM and flow cytometry require the use of fluorescently labeled polyelectrolytes (PEs). The film homogeneity can be assessed using CLSM, while flow cytometry allows analysis at unparalleled speed (thousands of particles per second) with unprecedented sensitivity (<0.5 fg of adsorbed polymer) of polydispersed particles of different size ( approximately 300 nm to tens of micrometers). Using CLSM and flow cytometry measurements, in conjunction with quartz crystal microgravimetry measurements on planar supports, allows quantification of PSS/PAH layer buildup on the particles. Furthermore, flow cytometry and DIC microscopy were used to unequivocally distinguish between silica-core PSS/PAH-shell particles and hollow PSS/PAH capsules obtained following core removal. The techniques outlined here are not limited to measuring PE deposition on solid particles but, in principle, are equally applicable to quantifying the adsorption of other materials (such as DNA, proteins, or nanoparticles) on a variety of particulate systems, including hollow capsules, emulsions, and cells.
Journal Article↗
Nanoporous block copolymer micelle/micelle multilayer films with dual optical properties.
We introduce a novel and versatile approach for preparing self-assembled nanoporous multilayered films with tunable optical properties. Protonated polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) and anionic polystyrene-block-poly(acrylic acid) (PS-b-PAA) block copolymer micelles (BCM) were used as building blocks for the layer-by-layer assembly of BCM multilayer films. BCM film growth is governed by electrostatic and hydrogen-bonding interactions between the opposite BCMs. Both film porosity and film thickness are dependent upon the charge density of the micelles, with the porosity of the film controlled by the solution pH and the molecular weight (M(w)) of the constituents. PS(7K)-b-P4VP(28K)/PS(2K)-b-PAA(8K) films prepared at pH 4 (for PS(7K)-b-P4VP(28K)) and pH 6 (for PS(2K)-b-PAA(8K)) are highly nanoporous and antireflective. In contrast, PS(7K)-b-P4VP(28K)/PS(2K)-b-PAA(8K) films assembled at pH 4/4 show a relatively dense surface morphology due to the decreased charge density of PS(2K)-b-PAA(8K). Films formed from BCMs with increased PS block and decreased hydrophilic block (P4VP or PAA) size (e.g., PS(36K)-b-P4VP(12K)/PS(16K)-b-PAA(4K) at pH 4/4) were also nanoporous. This is attributed to a decrease in interdigitation between the adjacent corona shells of the low M(w) BCMs, thus creating more void space between the micelles. Multilayer films with antireflective and photochromic properties were obtained by incorporating a water-insoluble photochromic dye (spiropyran) into the hydrophobic PS core of the BCMs assembled in the films. The optical properties of these films can be modulated by UV irradiation to selectively and reversibly control the transmission of light. Light transmission of higher than 99% was observed with accompanying photochromism in the (PS(7K)-b-P4VP(28K)/PS(2K)-b-PAA(8K)) multilayer films assembled at pH 4/6. Our approach highlights the potential to incorporate a range of materials, ranging from conventional hydrophilic materials with specific interactions to hydrophobic compounds, into the assembled BCMs to yield multifunctional nanoporous films.
Journal Article↗
Assembly of ultrathin polymer multilayer films by click chemistry.
Layer-by-layer (LbL) assembly is a versatile and robust technique for fabricating tailored thin films of diverse composition. Herein we report a new method of covalent coupling, click chemistry, to facilitate the LbL assembly of thin films. Linear film growth was observed using both UV-vis and FTIR spectroscopy, and film thicknesses were determined by ellipsometry and atomic force microscopy. The assembled films are shown to be stable in a wide pH range. This technique offers the potential to enable the synthesis of new types of stable and responsive LbL films from a variety of polymers.
Journal Article↗
Surface interactions during polyelectrolyte multilayer build-up. 2. The effect of ionic strength on the structure of preformed multilayers.
Interactions between surfaces bearing multilayer films of poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate sodium salt) (PSS) were investigated across a range of aqueous KBr solutions. Three layer films (PAH/PSS/PAH) were preassembled on mica surfaces, and the resulting interactions were measured with the interferometric surface force apparatus (SFA). Increasing the ionic strength of the medium resulted in a progressive swelling of the multilayer films. Interactions in solutions containing more than 10(-3) M KBr were dominated by a long-ranged steric repulsion originating from compression of polyelectrolyte segments extending into solution. In 10(-1) M KBr, repeated measurements at the same contact position showed a considerable reduction of the range and the strength of the steric force, indicating a flattening of the film during initial approach. Furthermore, this flattening was irreversible on the time scale of the experiments, and measurements performed up to 72 h after the initial compression showed no signs of relaxation. These studies aid in understanding the dominant interactions between polyelectrolyte multilayers, including polyelectrolyte films deposited on colloidal particles, which is important for the preparation of colloidally stable nanoengineered particles.
Journal Article↗
Nanoassembly of biocompatible microcapsules for urease encapsulation and their use as biomimetic reactors.
Biocompatible polypeptide capsules with high enzyme loading and activity prepared by templating mesoporous silica spheres were used as biomimetic reactors for performing CaCO3 synthesis exclusively inside the capsule interior via urease-catalyzed urea hydrolysis.
Biocompatible Materials↗
Compositional and structural engineering of DNA multilayer films.
We report the layer-by-layer (LbL) preparation of multilayered thin films that consist solely of DNA. The properties of the films were varied by assembling the layers from different oligonucleotide building blocks, which are composed of repeating homopolymeric units of nucleotides [adenosine (A), cytosine (C), guanine (G), and thymidine (T)] or "random" sequences. Films assembled from oligonucleotides with a single complementary unit did not show continual layer buildup. To form a repeating multilayer system, it was necessary for single-stranded DNA to be available for subsequent layers to hybridize. By using oligonucleotides with multiple nucleotide units, multilayer films were successfully assembled. We demonstrate that the thickness and swellability of the films can be controlled by the extent of hydrogen bonding (the G/C content of the oligonucleotide) and orientation of the oligomers. We have examined the stability and swellability of the films in solutions of varying salt concentration as well as in a denaturing urea solution. Stable, hollow DNA capsules were also formed by preparing the films on sacrificial colloidal templates, followed by removal of the core. The assembly of propagating structures through DNA hybridization paves the way for the engineering of DNA films with tailored composition, structure, and permeability, making them likely to find application in drug/gene delivery and biomolecular sensing.
Base Composition↗
Modulating the pattern quality of micropatterned multilayer films prepared by layer-by-layer self-assembly.
Patterned multilayer films composed of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS) were prepared using dip and spin self-assembly (SA) methods. A silicon substrate was patterned with a photoresist thin film using conventional photolithography, and PAH/PSS multilayers were then deposited onto the substrate surface using dip or spin SA. For spin SA, the photoresist on the substrate was retained, despite the high centrifugal forces involved in depositing the polyelectrolytes (PEs). The patterned multilayer films were formed by immersing the PE-coated substrates in acetone for 10 min. The effect of ionic strength on the pattern quality in dip and spin multilayer patterns (line-edge definition and surface roughness of the patterned region) was investigated by increasing the salt concentration in the PE solution (range 0-1 M). In dip multilayer patterns, the presence of salt increased the film surface roughness and pattern thickness without any deformation of pattern shape. The spin multilayer patterns formed without salt induced a height profile of about 130 nm at the pattern edge, whereas the patterns formed with high salt content (1 M) were extensively washed off the substrates. Well-defined pattern shapes of spin SA multilayers were obtained at an ionic strength of 0.4 M NaCl. Multilayer patterns prepared using spin SA and lift-off methods at the same ionic strength had a surface roughness of about 2 nm, and those prepared using the dip SA and lift-off method had a surface roughness of about 5 nm. The same process was used to prepare well-defined patterns of organic/metallic multilayer films consisting of PE and gold nanoparticles. The spin SA process yielded patterned multilayer films with various lengths and shapes.
Journal Article↗
Disulfide cross-linked polymer capsules: en route to biodeconstructible systems.
Hydrogen-bonded multilayer thin films were constructed using poly(vinylpyrrolidone) and poly(methacrylic acid) functionalized with cysteamine. The resulting films included thiol moieties that were cross-linked to render the films stable at physiological pH. Film buildup was followed using quartz crystal microgravimetry, which was also used to demonstrate the improved stability imparted by reacting the thiol moieties to form disulfide bonds. Films without disulfide bonds were readily deconstructed at physiological pH, while those with disulfide bonds were swollen upon exposure to this pH (7) but remained intact. Addition of a common thiol-disulfide exchange reagent, dithiothreitol (DTT) at pH 7 led to disassembly of the multilayer films. The films were also prepared on colloidal substrates (as demonstrated using confocal microscopy) and were used to retain a model drug (fluorescently labeled transferrin) and release this molecule when triggered by the addition of DTT. This approach has potential for the in vivo applications of hollow capsules, as thiol-disulfide exchange leading to deconstruction of the capsules can occur with the assistance of intracellular proteins.
Biodegradation, Environmental↗
Tailoring the interfaces between nematic liquid crystal emulsions and aqueous phases via layer-by-layer assembly.
We report the assembly of polyelectrolyte multilayer (PEM) films at the interfaces of thermotropic liquid crystal (LC) droplets dispersed in an aqueous phase. Exposure of PEM-coated droplets to surfactant slowed the bipolar-to-radial ordering transition of the LCs by 2 orders of magnitude relative to naked droplets. This shows that PEMs can be used to influence the interactions of analytes with the LC cores of the droplets, allowing tuning of the LC emulsion sensing properties.
Crystallization↗
Homogeneous, competitive fluorescence quenching immunoassay based on gold nanoparticle/polyelectrolyte coated latex particles.
This study reports a homogeneous and competitive fluorescence quenching immunoassay based on gold nanoparticle/polyelectrolyte (Au(NP)/PE) coated latex particles prepared by the layer-by-layer (LbL) technique. First, the resonant energy transfer from a layer of fluorescent PEs to Au(NP) in LbL assembled films on planar substrates was investigated. The quenching efficiency (QE) for the planar films depended on the cube of the distance between the two layers. A QE of 50% was achieved at a distance of ca. 15 nm, indicating that the Au(NP)/PE system is suitable for detecting binding/release events for antibodies. A homogeneous, competitive binding immunoassay for biotin was designed based on Au(NP)/PE-coated polystyrene particles of 488 nm diameter as quenching agents for a fluorescein isothiocyanate labeled anti-biotin immunoglobulin (FITC-anti-biotin IgG). Biotin molecules were localized on the Au(NP)/PE-coated latexes by depositing a layer of biotinylated poly(allylamine hydrochloride) (B-PAH), and FITC-anti-biotin IgGs were subsequently bound to the particles through interaction with the biotin on B-PAH. Transmission electron microscopy and quartz crystal microgravimetry confirmed the multilayer formation on latex particles and planar gold surfaces, respectively. The biotin-functionalized Au(NP)/PE-coated latexes terminated by FITC-anti-biotin IgG exhibited a dynamic sensing range of 1-50 nmol. These results indicate that Au(NP)/PE-coated latexes can be readily used as dynamic range tunable sensors.
Algorithms↗
Assembly of multilayer films from polyelectrolytes containing weak and strong acid moieties.
Multilayer films were assembled from a copolymer containing both weakly and strongly charged pendant groups, poly(4-styrenesulfonic acid-co-maleic acid) (PSSMA), deposited in alternation with poly(allylamine hydrochloride) (PAH). The strongly charged groups (styrene sulfonate, SS) are expected to form electrostatic linkages (to enhance film stability), while the weakly charged groups (maleic acid, MA) can alter multilayer film properties because they are responsive to external pH changes. In this study, we varied several assembly conditions such as pH, SS/MA ratio in PSSMA, and the ionic strength of the polyelectrolyte solutions. The multilayer films were also treated by immersion into pH 2 and 11 solutions after assembly. Quartz crystal microgravimetry and UV-visible spectrophotometry showed that the thickness of PSSMA/PAH multilayers decreases with increasing assembly pH regardless of whether salt was present in the polyelectrolyte solutions. When no salt was added, the multilayers are thinner, smoother, and grow less regularly. Atomic force microscopy images indicate that the presence of salt in polyelectrolyte solutions results in rougher surface morphologies, and this effect is especially significant in multilayers assembled at pH 2 and pH 11. When both polyelectrolytes are adsorbed at conditions where they are highly charged, salt was necessary to promote regular multilayer growth. Fourier transform infrared spectroscopy studies show that the carboxylic acids in the multilayers are essentially ionized when assembled from different pHs in 0.5 M sodium chloride solutions, whereas some carboxylic acids remain protonated in the multilayers assembled from solutions with no added salt. This resulted in different pH stability regimes when the multilayers were exposed to different pH solutions, post assembly.
Electrolytes↗
A molecular beacon approach to measuring the DNA permeability of thin films.
A new method for determining the permeability of thin films has been developed. A molecular beacon immobilized inside a porous silica particle that is subsequently encapsulated within a thin film can be used to determine the size of DNA that can permeate through the film. Using this technique, it has been determined that over 3 h, molecules larger than 4.7 nm do not permeate 15-nm thick polyelectrolyte multilayers and after 75 h molecules larger than 6 nm were excluded. This technique has applications for determining the permeability of films used for controlled drug and gene delivery.
Base Sequence↗
Colloid surface engineering via deposition of multilayered thin films from polyelectrolyte blend solutions.
Multilayer thin films were constructed on polystyrene colloidal particles by depositing alternating layers of poly(allylamine hydrochloride) (PAH) at pH 7.5 and varying composition blends of poly(acrylic acid) (PAA) and poly(styrenesulfonate) (PSS) at pH 3.5. Following the deposition of each layer, microelectrophoresis experiments showed alternating zeta-potentials, suggesting the formation of multilayered films on the particles. Scanning and transmission electron microscopy were used to examine the surface morphology of the colloidal particles, with homogeneous surface coatings apparent for films deposited from PAA/PSS blend solutions containing up to 90 wt % PAA. The colloidal stability of these particles is greater than those coated with individual PAH and PAA layers. In the case of the blend PAA/PSS = 25:75 wt %, up to 20 layers were assembled without compromising the colloidal stability of the dispersion. The results demonstrate that the deposition of layers from PE blend solutions containing a strong and weak PE can be used as a facile method for controlling the surface properties and hence the colloidal stability of core-shell particles, as well as the thickness and morphology of the coatings. Control of these parameters is important for subsequent processing and application of these particles in controlled delivery, photonics, catalytic, and separation applications.
Journal Article↗
Nanoporous polyelectrolyte spheres prepared by sequentially coating sacrificial mesoporous silica spheres.
Explore the source record for details and available documents.
Electrolytes↗
Light-responsive polyelectrolyte/gold nanoparticle microcapsules.
We report the preparation and characterization of light-responsive delivery vehicles, microcapsules composed of multiple polyelectrolyte layers and light-absorbing gold nanoparticles. The nanostructured capsules were loaded with macromolecules (fluorescein isothiocyanate-labeled dextran) by exploiting the pH-dependence of the shell permeability, and the encapsulated material was released on demand upon irradiation with short (10 ns) laser pulses in the near-infrared (1064 nm). In addition, the polyelectrolyte multilayer shell was modified with lipids (dilauroylphosphatidylethanolamine) and then functionalized with ligands (monoclonal immunoglobulin G antibodies) for the purposes of enhanced stability and targeted delivery, respectively. We anticipate that these capsules will find application in a range of areas where controlled delivery is desirable.
Capsules↗
Optical properties of nanoparticle-based metallodielectric inverse opals.
Metallodielectric inverse opals were prepared by co-crystallizing silica-coated gold nanoparticles and polymer spheres, followed by removal of the crystal template. The inverse opals exhibit a distinct reflectance peak, which results from Bragg diffraction due to the highly ordered 3D macroporous structure. Photonic band-structure calculations indicate that the characteristic reflectance peaks observed are signatures of the directional gap at the L point. It is demonstrated that the optical properties (the position and magnitude of the electromagnetic bandgaps) of the gold-silica nanocomposite inverse opals can be engineered by varying the nanoparticle morphology (core size and shell thickness) and/or the nanoparticle volume-filling ratio of the composite. The use of metallodielectric nanoparticles to form inverse opals offers a versatile approach to prepare photonic materials that may exhibit absolute bandgaps.
Crystallization↗
DNA multilayer films on planar and colloidal supports: sequential assembly of like-charged polyelectrolytes.
Multilayer films comprising solely negatively charged polyelectrolytes were sequentially assembled based on DNA hybridization. Films prepared from alternating layers of two-block homopolymeric nucleotides (polyA(20)G(20)/polyT(20)C(20)) grew linearly with increasing layer number, as verified by quartz crystal microgravimetry, UV-vis spectrophotometry and optical microscopy. Urea treatment of the films induced morphological changes, while exposure to low ionic strength solutions resulted in film disassembly. DNA multilayer films were also formed on silica particles, and DNA hollow capsules were obtained following dissolution of the template core.
Adsorption↗