PubMed Health⌕ Search

Biomedical subjects

G Daculsi

Publications and source records attributed to G Daculsi.

At least 19 recordsLinked to original sources

Noninvasive bone replacement with a new injectable calcium phosphate biomaterial.

The use of injectable calcium phosphate (CaP) biomaterials in noninvasive surgery should provide efficient bone colonization and implantation. Two different kinds of injectable biomaterials are presently under development: ionic hydraulic bone cements that harden in vivo after injection, and an association of biphasic calcium phosphate (BCP) ceramic granules and a water-soluble polymer vehicle (a technique particularly investigated by our group), providing an injectable CaP bone substitute (IBS). In our study, we compared these two approaches, using physicochemical characterizations and in vivo evaluations in light microscopy, scanning electron microscopy, and three-dimensional microtomography with synchrotron technology. Three weeks after implantation in rabbit bone, both biomaterials showed perfect biocompatibility and bioactivity, but new bone formation and degradation of the biomaterial were significantly greater for BCP granules than for ionic cement. Newly formed bone developed, binding the BCP granules together, whereas new bone grew only on the surface of the cement, which remained dense, with no obvious degradation 3 weeks after implantation. This study confirms that BCP granules carried by a cellulosic polymer conserve bioactivity and are conducive to earlier and more extensive bone substitution than a carbonated-hydroxyapatite bone cement. The presence of intergranular spaces in the BCP preparation, as shown on microtomography imaging, seems particularly favorable, allowing body fluids to reach each BCP granule immediately after implantation. Thus, the IBS functions as a completely interconnected ceramic with total open macroporosity. This new bone replacement approach should facilitate microinvasive bone surgery and local delivery of bone therapy agents.

Animals↗

Calcium-deficient apatite: a first in vivo study concerning bone ingrowth.

Biphasic calcium phosphate (BCP) materials are increasingly used to restore bone loss in surgery. Calcium-deficient apatites (CDA), the precursors of BCP, are closer in structure to biological apatites and can be associated with therapeutic agents to form drug-delivery systems. The purpose of this first in vivo study of CDA was to evaluate the osteoconductive properties of two composites, consisting of 40-80 microm granules carried by a cellulose-derived polymer, used to fill critical size bone defects in rabbit femoral ends. Animals were sacrificed 2 or 3 weeks after implantation. Histomorphometric analysis of scanning electron microscopy implant surface files was performed using gray level threshold that distinguish between bone or materials (white) and noncalcified tissue (black). Quantitative results for new bone formation showed no significant differences between the composites or the implantation periods. However, nearly all of the CDA disappeared early while supporting more extensive bone colonization than biphasic calcium phosphates implanted in the same conditions.

Animals↗

Compactibility study of calcium phosphate biomaterials.

This study investigated the micromechanism responsible for the densification and consolidation of powders during dynamic compaction, an experimental process in which ceramic is formed without heating. Three calcium-deficient apatites (CDA: two powders and a fibrous compound) and a biphasic calcium phosphate (BCP) were studied to determine their aptitude (rheological and physical properties) for compactibility under various dynamic compaction pressures. Powders were investigated for their physicochemistry, particle size, and flow time, and compacts for their compaction rate, density, specific area, mechanical characteristics, and disintegration time. Powder particles showed different morphological features depending on the synthesis protocol used, specific area and rheological behaviour. Compacts were not obtained with BCP, regardless of the gas pressure used, whereas CDA produced compacts with good mechanical properties (high hardness and compression stress), particularly for the fibrous compound. The poor compressibility and compactibility of BCP powders were confirmed, whereas fibrous CDA powders showed good compactibility conducive to high-quality filling of biomaterials.

Biocompatible Materials↗

Vancomycin encapsulation in biodegradable poly(epsilon-caprolactone) microparticles for bone implantation. Influence of the formulation process on size, drug loading, in vitro release and cytocompatibility.

Vancomycin encapsulation in biodegradable poly(epsilon-caprolactone) microparticles (200 microm mean diameter) was most efficient with a simple emulsion technique that dispersed 122.5 mg/g of polymer. Scanning electron micrographs showed smooth or pitted particles. Dissolution studies were correlated with microparticle morphology, indicating higher release with pitted particles when vancomycin was encapsulated in a dissolved state. The cytocompatibility of these poly(epsilon-caprolactone) microparticles was demonstrated by a direct contact cytotoxic assay. This material can be considered as an efficient drug delivery system for bone implantation.

Absorbable Implants↗

Calcium-deficient apatite: influence of granule size and consolidation mode on release and in vitro activity of vancomycin.

The use of dynamic compaction and isostatic compression to consolidate calcium phosphate powder loaded with a therapeutic agent avoids a sintering step that could destroy the drug. The present study applied these consolidation methods to vancomycin-loaded calcium-deficient apatite powder, using three granulometric fractions (40-80, 80-200 and 200-500 micrometer). In vitro release profiles were determined via an original system derived from low-pressure liquid chromatography. The biological activity of vancomycin was measured by an in vitro standardized bacteriologic assay, which showed that the drug is completely active after association with calcium phosphate. Regardless of the consolidation method and granulometric fraction used, release profiles were not significantly different and therefore adaptable to injectable suspensions.

Anti-Bacterial Agents↗

Synchrotron X-ray microtomography (on a micron scale) provides three-dimensional imaging representation of bone ingrowth in calcium phosphate biomaterials.

This study used synchrotron X-ray microtomography on a micron scale to compare three-dimensional (3D) bone ingrowth after implantation of various calcium phosphate bone substitutes in a rabbit model. The advantage of using this new method for the study of biomaterials was then compared with histomorphometry for analysis of interconnection and bone ingrowth. The study focused on the newly formed bone-biomaterial interface. Macroporous Biphasic Calcium Phosphate (MBCP) ceramic blocks and two different injectable calcium phosphate biomaterials [an injectable bone substitute (IBS) consisting of a biphasic calcium phosphate granule suspension in hydrosoluble polymer and a calcium phosphate cement material (CPC)] were studied after in vivo implantation. Absorption or phase-contrast microtomography was performed with the dedicated set-up at beamline ID22. Experimental spatial resolution was between 1 and 1.4 microm, depending on experimental radiation. All calcium phosphates tested showed osteoconduction. IBS observations after 3D reconstruction showed interconnected bioactive biomaterial with total open macroporosity and complete bone ingrowth as early as 3 weeks after implantation. This experimentation was consistent with two-dimensional histomorphometric analysis, which confirmed its suitability for biomaterials. This 3D study relates the different types of bone substitution to biomaterial architecture. As porosity and interconnection increase, bone ingrowth becomes greater at the expense of the bone substitute: IBS>MBCP>CPC.

Animals↗

Modification of gene expression induced in human osteogenic and osteosarcoma cells by culture on a biphasic calcium phosphate bone substitute.

Bone hybrids made of bioceramics seeded with mesenchymal or osteoblastic cells are very promising alternatives to autologous bone graft. Along this line, the development of in vitro models, dedicated to analyze the influence of these biomaterials on osteogenic cells, will help to improve the performance of these bone substitutes. In the present work we analyzed the effects of a macroporous biphasic calcium phosphate ceramic (BCP, Triosite) on three different human osteosarcoma cell lines and on human primary osteogenic cells and compared this culture substratum to traditional culture on plastic. We showed that all these osteoblastic cells adhere and proliferate on the trabecular BCP blocks, with a different spatial organization for osteosarcoma cells compared to normal osteogenic cells. We also demonstrated that osteoblastic marker genes such as Cbfa1, type I collagen, osteonectin, osteopontin, and osteocalcin were expressed at similar levels by these cells cultured on either substratum, suggesting that adhesion to BCP does maintain the osteoblastic phenotype of these cells. Next, we provided the first evidence of differences of cytokine expression profiles revealed on this Ca-P ceramic as compared to expression in classical culture. These modifications affected the expression of cytokines such as TGF-beta1, G-CSF, and IL-3 and were quantitatively different between osteosarcoma cells and normal osteogenic cells. Given the role of these cytokines in bone biology and in hematopoiesis, these results obtained in vitro suggest that the BCP ceramic studied here could stimulate osteogenesis in vivo by activating cellular processes during bone formation and healing. This study highlights the notion that the nature of the culture substratum must be taken into account when studying bone cell biology in vitro. Owing to the nature and spatial organization of the BCP, our hypothesis is that culture on BCP is closer to the physiological situation than culture on plastic.

Adolescent↗

Phosphate is a specific signal for ATDC5 chondrocyte maturation and apoptosis-associated mineralization: possible implication of apoptosis in the regulation of endochondral ossification.

UNLABELLED: Involvement of Pi and Ca in chondrocyte maturation was studied because their levels increase in cartilage growth plate. In vitro results showed that Pi increases type X collagen expression, and together with Ca, induces apoptosis-associated mineralization, which is similar to that analyzed in vivo, thus suggesting a role for both ions and apoptosis during endochondral ossification. INTRODUCTION: During endochondral ossification, regulation of chondrocyte maturation governs the growth of the cartilage plate. The role of inorganic phosphate (Pi), whose levels strongly increase in the hypertrophic zone of the growth plate both in intra- and extracellular compartments, on chondrocyte maturation and mineralization of the extracellular matrix has not yet been deciphered. MATERIALS AND METHODS: The murine chondrogenic cell line ATDC5 was used. Various Pi and calcium concentrations were obtained by adding NaH2PO4/Na2HPO4 and CaCl2, respectively. Mineralization was investigated by measuring calcium content in cell layer by atomic absorption spectroscopy and by analyzing crystals with transmission electron microscopy and Fourier transform infrared microspectroscopy. Cell differentiation was investigated at the mRNA level (reverse transcriptase-polymerase chain reaction [RT-PCR] analysis). Cell viability was assessed by methyl tetrazolium salt (MTS) assay and staining with cell tracker green (CTG) and ethidium homodimer-(EthD-1). Apoptosis was evidenced by DNA fragmentation and caspase activation observed in confocal microscopy, as well as Bcl-2/Bax mRNA ratio (RT-PCR analysis). RESULTS: We showed that Pi increases expression of the hypertrophic marker, type X collagen. When calcium concentration is slightly increased (like in cartilage growth plate), Pi also induces matrix mineralization that seems identical to that observed in murine growth plate cartilage and stimulates apoptosis of differentiated ATDC5 cells, with a decrease in Bcl-2/Bax mRNA ratio, DNA fragmentation, characteristic morphological features, and caspase-3 activation. In addition, the use of a competitive inhibitor of phosphate transport showed that these effects are likely dependent on Pi entry into cells through phosphate transporters. Finally, inhibition of apoptosis with ZVAD-fmk reduces pi-induced mineralization. CONCLUSIONS: These findings suggest that Pi regulates chondrocyte maturation and apoptosis-associated mineralization, highlighting a possible role for Pi in the control of skeletal development.

Animals↗

Fourier transform infrared microspectroscopic investigation of the organic and mineral constituents of peritubular dentin: a horse study.

Peritubular dentin (PTD) is a relatively dense mineralized tissue surrounding tooth dentin tubules, whose composition and mode of formation are still unclear. Fourier transform infrared microspectroscopic studies of the organic and mineral components of the highly developed horse PTD indicate that the peritubular matrix is less abundant than the intertubular matrix but is also mainly composed of collagen, which is more hydrated. These data suggest that most of the crystals are located outside the collagen fibrils and probably not associated with protein components. The crystals in PTD have nearly the same crystallinity as those in intertubular spaces, showing comparable amounts of carbonate ions, although some PO4 groups have different nonapatitic environments. Horse PTD composition is very similar to that of ITD, with collagen as the main protein component and carbonated apatite as the mineral fraction but the different proportions of these constituents and the greater water content in PTD suggest a different organization.

Animals↗

In vitro characterization and in vivo properties of a carbonated apatite bone cement.

This study evaluated the in vivo behavior of an injectable calcium phosphate bone cement implanted in bone defects at the distal end of rabbit femora. After 3 weeks, samples were harvested and processed for undecalcified sectioning. Scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared microspectroscopy showed direct contact of bone and cement without soft tissue interposition, biocompatibility, and bioactivity with osteoconductive properties.

Animals↗

Crystallization at the polymer/calcium-phosphate interface in a sterilized injectable bone substitute IBS.

Calcium phosphate (CaP) ceramics are the main raw materials used to elaborate blocks or granules for bone substitutes. In this study, injectable bone substitutes (IBS) were developed for applications in orthopedic or dental surgery. Sterile, ready-to-use composite containing CaP granules (biphasic calcium phosphate, BCP) and polymer (hydroxypropylmethylcellulose, HPMC) was prepared. Steam sterilization produced new phenomena at the CaP/polymer interface, resulting in crystal growth. These phenomena may constitute a model for the biomineralization study. Scanning electron microscopy showed that the formed crystallites organize themselves into a three-dimensional structure. Currently, the mechanisms of crystal growth are unknown and have been observed with only one combination of polymer/BCP ceramics after steam sterilization.

Biocompatible Materials↗

Association of vancomycin and calcium phosphate by dynamic compaction: in vitro characterization and microbiological activity.

Dynamic compaction has rarely been used to produce drug-delivery devices in granule form. This report considered four processes associating vancomycin and compared dynamic compaction with wet granulation, a classical method. In the wet granulation study, vancomycin was associated with biphasic calcium-phosphate (BCP) granules either by adsorption or incorporation with a new granulation. In the dynamic compaction study, BCP powder was compacted at 1.1, 1.5 and 1.9 MPa. The compacts obtained were crushed and sieved (200-500 microm), and the vancomycin solution was adsorbed on the resulting granules. After crushing and sieving, the compaction of BCP and vancomycin powders produced vancomycin-loaded granules. In each study, 4.76% of vancomycin was associated with BCP. Granules were characterized in terms of porosity, vancomycin release and vancomycin biological activity. Physicochemical studies of BCP and vancomycin showed their structural integrity after dynamic compaction, which prolonged vancomycin release time from 1 to 6 days. However, a microbiological assay indicated that vancomycin had been altered since only 27.7% was found to be active.

Anti-Bacterial Agents↗

A new injectable bone substitute combining poly(epsilon-caprolactone) microparticles with biphasic calcium phosphate granules.

Previous studies have shown the effectiveness of an injectable bone substitute (IBS) composed of biphasic calcium phosphate in 2% hydroxypropyl methylcellulose gel (50/50 w/w). A therapeutic agent in the form of a drug can be added to the biomaterial by encapsulation into microparticles to protect the active agent, control its release and preserve the material rheological properties. Poly(epsilon-caprolactone) was used in this study because of its biocompatibility and resorbability, as tested in orthopaedic implants and surgical sutures. Particles (80-200 microm) were manufactured by a solvent evaporation-extraction process (1 g of polymer, 11-15 ml methylene chloride, with a stirring speed of 400-600 rpm) and introduced into the IBS in a 5-50% (V/V) range. Injectability was evaluated by texture analysis. With less than 45% of particles, the material had rheological properties similar to those of the reference IBS, whereas injectability decreased markedly with more than 45% of particles. A preliminary in vitro release study showed that this type of triphasic IBS could be efficient for drug delivery systems with osteoconduction properties.

Anti-Bacterial Agents↗

Fourier transform infrared microspectroscopic investigation of the maturation of nonstoichiometric apatites in mineralized tissues: a horse dentin study.

Fourier transform infrared microspectroscopy (FTIRM) was used to study carbonated apatite/collagen interactions and maturation in horse secondary dentin. Unlike human dentin, this model contains no peritubular material around the odontoblastic processes and is thus quite similar to bone in composition, but not subject to tissue turnover. Crystals close to the mineralization front were very immature, showing high HPO(4) and very low CO(3) levels. Carbonate ions were located essentially in very labile, reactive environments, probably on the crystal surface. Removal of some of the HPO(4) ions from crystals during maturation was linked to an increase in total carbonate content. The CO(3) ions in labile environments decreased, probably after incorporation into more organized regions of the lattice. However, this increase of total carbonate content was associated with greater mineral crystallinity, confirming findings in other studies of synthetic apatite maturation in vitro. The good correlation between these results and those of in vitro experiments suggests that crystal maturation is essentially due to physicochemical processes and that the organic matrix controls only crystal size, multiplication, and/or organization.

Animals↗

Interaction between hydroxypropyl methylcellulose and biphasic calcium phosphate after steam sterilisation: capillary gas chromatography studies.

The purpose of this study was to check the chemical stability of an injectable bone substitute (IBS) composed of a 50/50 w/w mixture of 2.92% hydroxypropyl methylcellulose (HPMC) solution in deionized water containing biphasic calcium phosphate (BCP) granules (60% hydroxyapatite/40% beta-tricalcium phosphate w/w). After separation of the organic and mineral phases, capillary gas chromatography (GC) was used to study the possible modification of HPMC due to the contact with BCP granules following steam sterilisation and 32 days storage at room temperature. HPMC was extracted from IBS in aqueous medium, and a dialytic method was then used to extract calcium phosphate salts from the HPMC. The percentage of HPMC extracted from BCP was 98.5%+/-0.5%, as measured by UV. GC showed no chemical modifications after steam sterilisation and storage.

Biocompatible Materials↗

Study of the maturation of the organic (type I collagen) and mineral (nonstoichiometric apatite) constituents of a calcified tissue (dentin) as a function of location: a Fourier transform infrared microspectroscopic investigation.

Fourier transform infrared microspectroscopy (FTIRM) was used to investigate the organic and mineral phases of a calcified tissue (dentin) as a function of its location from predentin toward enamel. Thin dentin slices (decalcified or not) were fixed in formaldehyde and embedded in glycolmethylmethacrylate (GMA). Fixation did not denature collagen, and GMA did not interact with organic or mineral constituents of dentin. The v1v3 PO4 domain was studied in particular in order to estimate mineral maturity and amide I, II, A, and B to obtain data on protein conformation. The results showed that dentin apatite became increasingly mature (stoichiometric) from the mineralization front toward the enamel, especially through loss of HPO4(2-) groups and vacancies. Moreover, collagen fibrils became less and less hydrated, suggesting that intrafibrillar mineralization partially dehydrated the collagen. Combined study of the organic and mineral fractions of calcified tissues may help clarify their relationships in physiological and pathological tissues.

Adolescent↗

[Autografts versus biomaterials for ossiculoplasty with normal stapes; a comparative analysis of functional outcome in 100 cases].

Ossicular graft is usually considered as the reference for surgical substitution in ossiculoplasties. Nevertheless, according to the infectious risks, nothing but autografts or synthetic prosthetic substitutes should be used nowadays. Authors compare hearing results for 100 patients after ossiculoplasty with either ossicular autograft or calcium-phospathe chain reconstruction. Audiometric results were retreived using both Glasgow Benefit Plot study and post-operative air-bone gap thresholds closure. Significant hearing improvement was statistically demonstrated in both conditions, and 60% of the patients had a post-operative hearing gain. Autograft ossicular reconstructions did not show to provide higher results. Biocompatibility and functionnal properties of calcium-phosphate materials retreived in this study, indicate that those ceramic substitutes should be considered as the best alternative to autografts.

Adolescent↗

Scanning electron microscopic description of cellular activity and mineral changes in feline odontoclastic resorptive lesions.

The cellular activity and changes in mineral composition of dental tissues involved in feline odontoclastic resorptive lesions were investigated. Teeth with at least 1 lesion (n = 10) were extracted from 10 different cats that were presented primarily for chronic gingivostomatitis and/or severe periodontal disease. Scanning electron microscopic methods were used to determine the presence of resorptive cells in 8 teeth while 2 teeth were evaluated for pathologic changes in dental mineral composition. Observations were complicated by the presence of organic wear on the dental surfaces, however resorptive cells could be clearly identified in feline odontoclastic resorptive lesions. Resorptive cells had morphologic features indicative of "osteoclast-like" cells or odontoclasts. Resorptive cell activity created a resorption area of darker dentin continuous with physiologic dentin. The darker dentin area seemed poorly mineralized and showed a significantly lower calcium/phosphorous ratio compared with adjacent physiologic denting in 1 tooth. A significantly higher level of magnesium combined with available carbonate ions may have increased the solubility in areas of darker dentin.

Animals↗