Biomedical subjects

Guy Daculsi

Publications and source records attributed to Guy Daculsi.

At least 19 recordsLinked to original sources

PubMed2007

Hybrid composites of calcium phosphate granules, fibrin glue, and bone marrow for skeletal repair.

Synthetic bone substitutes, such as calcium phosphate ceramics, give good results in clinical applications. In order to adapt to surgical sites, bioceramics come in the form of blocks or granules, and are either dense or porous. Combining these bioceramics with fibrin glue provides a mouldable and self-hardening composite biomaterial with the biochemical properties of each component. Critical-sized defects in the femoral condyle of rabbits were filled with TricOs/fibrin glue/bone marrow hybrid/composite material. The TricOs granules (1-2 mm) were composed of hydroxyapatite and beta tricalcium phosphate (60/40 in weight). The fibrin glue was composed of fibrinogen, thrombin and other biological factors and mixed with MBCP granules either simultaneously or sequentially. Bone marrow was also added to the MBCP/fibrin composite prior to filling the defects. After 3, 6, 12, and 24 weeks of implantation, the newly-formed bone was analysed with histology, histomorphometry and mechanical tests. The newly-formed bone had grown centripetally. Simultaneous application of fibrin glue showed better results for mechanical properties than sequential application after 6 weeks. Around 40% of bone had formed after 24 weeks in the three groups. Although the addition of bone marrow did not improve bone formation, the MBCP/fibrin material could be used in clinical bone filling applications.

Animals↗

PubMed2007

Calcium-deficient apatite synthesized by ammonia hydrolysis of dicalcium phosphate dihydrate: influence of temperature, time, and pressure.

In this work, calcium-deficient apatites (CDA) were synthesized by ammonia hydrolysis reaction of dicalcium phosphate dihydrate (DCPD; CaHPO4 x 2 H2O) to obtain biphasic calcium phosphates (BCP) without any extraionic substitution. The influence of three parameters was studied: temperature of the reaction (70 and 100 degrees C), time of the reaction (4 and 18 h), and the pressure (open and closed system). Experiments were made according to a factorial design method (FDM) allowing optimization of the number of samples as well as statistical analysis of results. Moreover, the influence of temperature (until 200 degrees C) was investigated. The crystal size of CDA was determined according to the Scherrer's formula and from Rietveld refinements taking the CDA anisotropy into account. The last method seems to be a reliable method to determine crystallite sizes of CDA, since crystallite sizes of CDA along <00l> and directions were accessible. The results describe the hydroxyapatite % (HA%) in BCP by a first-order polynomial equation in the experimental area studied and the HA content was found to increase by raising time and temperature of the reaction. Moreover, the type of reaction system (open/closed vessel) appeared to have little influence on HA%.

Ammonia↗

PubMed2006

Physico-chemical-mechanical and in vitro biological properties of calcium phosphate cements with doped amorphous calcium phosphates.

Calcium phosphate cements (CPCs) are successfully used as bone substitutes in dentistry and orthopaedic applications. This study investigated the physico-chemical-mechanical properties of and in vitro biological properties (cell response) of CPCs prepared with amorphous calcium carbonate phosphate (ACCP) doped with magnesium (ACCP-Mg), zinc (ACCp-Zn) or fluoride (ACCP-F) ions. The experimental CPC consisted of alpha-TCP, doped ACCP, and MPCM powders as matrix and biphasic calcium phosphate (BCP) granules. X-ray diffraction analysis showed that the matrix converted to apatite with poor crystallinity (reflecting small crystal size) after setting for 24 h, while BCP remained apparently unchanged. Cements with ACCP-F (F-CPC) had shorter setting times and greater compressive strength compared to cements with ACCP-Mg (Mg-CPC) or ACCP-Zn (Zn-CPC). Scanning electron microscopy (SEM) showed that crystals set on Mg-CPC and Zn-CPC were smaller compared to those on F-CPC. The total porosity of Mg-CPC was greater compared to Zn-CPC or F-CPC. Osteoblast-like cells, MC3T3-E1, remained viable and maintained their ability to express alkaline phosphatase in contact with the CPCs with doped ACCPs.

3T3 Cells↗

PubMed2006

VEGF and VEGF receptors are differentially expressed in chondrocytes.

During long bone development, cartilage replacement by bone is governed in part by angiogenesis. Although it has been demonstrated that vascular endothelial growth factor (VEGF-A) is crucial during endochondral ossification, little is known about the involvement of the other VEGF family members. Thus, we examined the expression and production of these members on primary chondrocytes and ATDC5 chondrogenic cells. VEGF-A, VEGF-B, VEGF-C and VEGF-D were shown to be expressed and synthesized demonstrating that numerous angiogenic factors can be produced by chondrocytes. In ATDC5 VEGF-A, VEGF-B and VEGF-C were over-expressed in the presence of chondrogenic and bone morphogenetic protein (BMP)-2 treatment suggesting that these factors play an important role during chondrogenesis. In addition, neuropilin-1, VEGF receptor-2 and VEGF receptor-3 gene expression were observed with an increase in VEGF-R2 expression under chondrogenic and BMP-2 treatment, suggesting that VEGF proteins could act in an autocrine/paracrine manner in addition to their angiogenic function. In conclusion, we demonstrated for the first time that chondrocytes secreted the four members of the VEGF family. We also showed that VEGF-B, VEGF-C and VEGF-D were secreted as processed proteins. The up-regulation of VEGF-B and VEGF-C at the mRNA and protein levels under chondrogenic stimulation strongly suggests a major role for these proteins in growth plate physiology.

Animals↗

PubMed2006

Injectable calcium phosphate scaffold and bone marrow graft for bone reconstruction in irradiated areas: an experimental study in rats.

The purpose of this study was to assess the possibilities for bone reconstruction of an injectable calcium phosphate scaffold (ICPS) associated with a bone marrow (BM) graft after irradiation in a rat model. External irradiation was delivered to 12 out of 27 inbred rats. Three weeks later, four osseous defects were created per animal and were kept empty or filled with either ICPS alone, BM graft alone or with a mixture of BM and ICPS. Three weeks after implantation, bone specimens were studied under light microscopy and by scanning electron microscopy. Filling irradiated defects with ICPS alone was not accompanied by the formation of new bone. The BM graft associated with ICPS significantly increased ceramic degradation (p<0.01) and bone ingrowth (p<0.01) in the irradiated areas. The results are evidence for the meaning of the BM in driving the bone repair in irradiated animals.

Animals↗

PubMed2006

Ectopic bone formation using an injectable biphasic calcium phosphate/Si-HPMC hydrogel composite loaded with undifferentiated bone marrow stromal cells.

We have used a new synthetic injectable composite constituted of hydroxyapatite/tricalcium phosphate (HA/TCP) particles in suspension in a self-hardening Si-hydroxypropylmethylcellulose (HPMC) hydrogel. The aim of this study was to evaluate in vivo the biocompatibility and the new bone formation efficacy of this scaffold loaded with undifferentiated bone marrow stromal cells (BMSCs). This biomaterial was mixed extemporaneously with BMSCs prepared from C57BL/6 mice, injected in subcutaneous and intramuscular sites and retrieved 4 and 8 weeks after implantation. Dissection of the implants revealed a hard consistency and the absence of a fibrous capsule reflecting a good integration into the host tissues. Histological analysis showed mineralized woven bone in the granule inter-space with numerous active osteoclasts attached to the particles as assessed by the presence of multinucleated cells positively stained for TRAP activity and for the a3 subunit of the V-ATPase. Small vessels were homogenously distributed in the whole implants. Similar results were obtained in SC and IM sites and no bone formation was observed in the control groups when cell-free and particle-free transplants were injected. These results indicate that this injectable biphasic calcium phosphate-hydrogel composite mixed with undifferentiated BMSCs is a new promising osteoinductive bone substitute. It also provides with an original in vivo model of osteoclast differentiation and function.

Animals↗

PubMed2006

The modulation of gene expression in osteoblasts by thrombin coated on biphasic calcium phosphate ceramic.

For many years, fibrin sealants were associated with bone substitutes to promote bone healing. However, the osteoblastic response to fibrin sealant components remains poorly documented. In this study, MC3T3-E1 osteoblastic cells were cultured on biphasic calcium phosphate ceramic (MBCP) coated with Tissucol components (thrombin and fibrinogen). Analysis of osteoblastic differentiation markers by RT-PCR revealed that MBCP coated with Tissucol stimulated mRNA levels for osteocalcin and alkaline phosphatase (ALP). Of all the components of Tissucol, thrombin has been reported to affect osteoblastic behavior. Our results demonstrated that low thrombin concentrations (0.5-5 U/ml) stimulated mRNA levels for ALP, whereas high thrombin concentrations (50-100 U/ml) decreased mRNA levels for ALP and PTH/PTHrP receptor and also increased mRNA level for the osteoclastogenesis inhibitor OPG. As thrombin stimulated angiogenesis, we then wondered whether thrombin could influence the expression of angiogenic factors. Low thrombin concentrations were shown to up-regulate mRNA levels for VEGF-B and VEGF-R1, suggesting an autocrine/paracrine role for VEGF-B. Higher thrombin concentrations also up-regulated mRNA for VEGF-A and neuropilin-1. In conclusion, the association of MBCP with thrombin and fibrinogen appears to be a convenient scaffold for bone cell differentiation. Thrombin could also acts at the cellular level by increasing the angiogenic potential of osteoblasts as well as their responsiveness to thrombin and VEGF.

Animals↗

PubMed2006

Quantitative and reliable in vitro method combining scanning electron microscopy and image analysis for the screening of osteotropic modulators.

The increased generation and up-regulated activity of bone resorbing cells (osteoclasts) play a part in the impairment of bone remodeling in many bone diseases. Numerous drugs (bisphosphonates, calcitonin, selective estrogen receptor modulators) have been proposed to inhibit this increased osteoclastic activity. In this report, we describe a pit resorption assay quantified by scanning electron microscopy coupled with image analysis. Total rabbit bone cells with large numbers of osteoclasts were cultured on dentin slices. The whole surface of the dentin slice was scanned and both the number of resorption pits and the total resorbed surface area were measured. Resorption pits appeared at 48 h and increased gradually up to 96 h. Despite the observation of a strong correlation between the total resorption area and the number of pits, we suggest that area measurement is the most relevant marker for osteoclastic activity. Osteotropic factors stimulating or inhibiting osteoclastic activity were used to test the variations in resorption activity as measured with our method. This reproducible and sensitive quantitative method is a valuable tool for screening for osteoclastic inhibitors and, more generally, for investigating bone modulators.

Animals↗

PubMed2006

Bone repair using a new injectable self-crosslinkable bone substitute.

A new injectable and self-crosslinkable bone substitute (IBS2) was developed for filling bone defects. The IBS2 consisted of a chemically modified polymer solution mixed with biphasic calcium phosphate (BCP) ceramic particles. The polymer hydroxypropylmethyl cellulose was functionalized with silanol groups (Si-HPMC) and formed a viscous solution (3 wt %) in alkaline medium. With a decrease in pH, self-hardening occurred due to the formation of intermolecular -Si-O- bonds. During setting, BCP particles, 40 to 80 microm in diameter, were added to the polymer solution at a weight ratio of 50/50. The resulting injectable material was bilaterally implanted into critically sized bone defects at the distal femoral epiphyses of nine New Zealand White rabbits. The IBS2 filled the bone defects entirely and remained in place. After 8 weeks, bone had grown centripetally and progressed towards the center of the defects. Newly formed bone, ceramic, and nonmineralized tissue ratios were 24.6% +/- 5.6%, 21.6% +/- 5.8%, and 53.7% +/- 0.1%, respectively. Mineralized and mature bone was observed between and in contact with the BCP particles. The bone/ceramic apposition was 73.4% +/- 10.6%. The yield strength for the IBS2-filled defects was 16.4 +/- 7.2 MPa, significantly higher than for the host trabecular bone tissue (2.7 +/- 0.4 MPa). This study showed that BCP particles supported the bone healing process by osteoconduction while the Si-HPMC hydrogel created intergranular space for bone ingrowth. This new injectable and self-crosslinkable bone substitute could be used conveniently in orthopedic surgery for filling critical-size bone defects.

Animals↗

PubMed2005

Micro-architecture of calcium phosphate granules and fibrin glue composites for bone tissue engineering.

Calcium phosphate ceramics are currently used as bone graft substitutes in various types of clinical applications. Fibrin glue is also used in surgery due to its haemostatic, chemotactic and mitogenic properties. By combining these two biomaterials, new composite scaffolds were prepared. In this study, we attempt to analyse whether thrombin concentration in the fibrin glue could influence the properties of the composite. The association between fibrin glue and calcium phosphate ceramic granules was characterized at the ultra structural level. Micro and macroporous biphasic calcium phosphate ceramic granules with a diameter of 1-2mm composed of hydroxyapatite and beta-tricalcium phosphate (60/40) were associated to fibrin glue. The composites were observed by scanning and transmission electron microscopy and microcomputed tomography. Fibre thickness, porosity and homogeneity of the fibrin clot were modified by increased the thrombin concentration. Mixing fibrin glue with calcium phosphate granules (1:2) did not modify the microstructure of the fibrin clot in the composite. Nevertheless, thrombin interacted with the bioceramic by inducing the nucleation of crystalline precipitate at the ceramic/fibrin glue interface. Combining fibrin sealant and calcium phosphate ceramics could lead to new scaffolds for bone tissue engineering with the synergy of the properties of the two biomaterials.

Bone Substitutes↗

PubMed2005

Osteointegration of femoral stem prostheses with a bilayered calcium phosphate coating.

Our purpose was to evaluate the osteointegration of bilayered calcium phosphate (CaP)-coated femoral hip stems in a canine model. A first layer of hydroxyapatite (HA) 20 microm thick and a superficial layer of Biphasic Calcium Phosphate (BCP) 30 microm thick were plasma-sprayed on to the proximal region of sandblasted Ti6Al4V prostheses. Bilayered CaP-coated and non-coated canine femoral stems were implanted bilaterally under general anesthesia in 6 adult female Beagle dogs. After 6 and 12 months, a significant degradation of the bilayered coating occurred with a remainder of 33.1+/-12.4 and 23.6+/-9.2 microm in thickness, respectively. Lamellar bone apposition was observed on bilayered coated implants while fibrous tissue encapsulation was observed on non-coated femoral stems. The bone-implant contacts (BIC) were 91+/-3% and 81+/-8% for coated and 7+/-8% and 8+/-12% for non-coated implants, at 6 and 12 months, respectively. Our study supports the concept of a direct relationship between the biodegradation of CaP coating and the enhanced osteointegration of titanium prostheses. A bilayered CaP coating might therefore enhance bone apposition in the early stages because of the superior bioactivity of the BCP layer while the more stable HA layer might sustain bone bonding over long periods.

Animals↗

PubMed2005

Dexamethasone stimulates differentiation of odontoblast-like cells in human dental pulp cultures.

Regenerative dental pulp strategies require the identification of precursors able to differentiate into odontoblast-like cells that secrete reparative dentin after injury. Pericytes have the ability to give rise to osteoblasts, chondrocytes, and adipocytes, a feature that has led to the suggestion that odontoblast-like cells could derive from these perivascular cells. In order to gain new insights into this hypothesis, we investigated the effects of dexamethasone (Dex), a synthetic glucocorticoid employed to induce osteogenic differentiation in vitro, in a previously reported model of human dental pulp cultures containing pericytes as identified by their expression of smooth muscle actin (SMA) and their specific ultrastructural morphology. Our data indicated that Dex (10(-8) M) significantly inhibited cell proliferation and markedly reduced the proportion of SMA-positive cells. Conversely, Dex strongly stimulated alkaline phosphatase (ALP) activity and induced the expression of the transcript encoding the major odontoblastic marker, dentin sialophosphoprotein. Nevertheless, parathyroid hormone/parathyroid hormone-related peptide receptor, core-binding factor a1/osf 2, osteonectin, and lipoprotein lipase mRNA levels were not modified by Dex treatment. Dex also increased the proportion of cells expressing STRO-1, a marker of multipotential mesenchymal progenitor cells. These observations indicate that glucocorticoids regulate the commitment of progenitors derived from dental pulp cells to form odontoblast-like cells, while reducing the proportion of SMA-positive cells. These results provide new perspectives in deciphering the cellular and molecular mechanisms leading to reparative dentinogenesis.

Actins↗

PubMed2005

In vivo biological performance of composites combining micro-macroporous biphasic calcium phosphate granules and fibrin sealant.

INTRODUCTION: Fibrin glues are currently used by surgeons and can facilitate the handling of biomaterials. Combining fibrin glue with calcium phosphate bioceramics gives a mouldable composite that cements the granules into the implantation site. In addition to the mechanical aspect of the composite, it has been suggested that the mixture also promotes wound healing. These human blood derivatives contain natural (aprotinin) or synthetic (tranexamic acid) antifibrinolytic substances. We compared the bioactivity of two composites combining calcium phosphate granules with two different types of fibrin glue, one with aprotinin and the other with tranexamic acid. MATERIALS AND METHODS: The composite was composed of fibrin glue (Tissucol) and 1 to 2 mm granules of biphasic calcium phosphate granules (MBCP) with a volume ratio of 1 for 2. Bone cavities were drilled in 12 New Zealand rabbits and filled with a composite with aprotinin-fibrin glue on the right condyle and one with tranexamic acid-fibrin glue on the left condyle. The rabbits were randomized into two groups: 3 and 6 weeks of delay. Light microscopy, scanning electron microscopy and image analysis were performed. RESULTS: No adverse reactions were observed in either sample. Bony ingrowth associated with bioceramic resorption by osteoclastic TRAP-positive cells was noted. No significant difference was observed between the two composites. The bony ingrowth and ceramic resorption were qualitatively and quantitatively similar with both composites. CONCLUSION: This study demonstrated that the choice of a natural (aprotinin) or synthetic (tranexamic acid) antifibrinolytic agent in the fibrin sealant associated with calcium phosphate granules and used as a bone substitute had no effect on the bioactivity of the composite. It remained efficient in bone reconstruction, no adverse effects were observed, and the bony ingrowth was qualitatively and quantitatively equivalent with the two types of fibrin sealant.

Animals↗

PubMed2005

MBCP biphasic calcium phosphate granules and tissucol fibrin sealant in rabbit femoral defects: the effect of fibrin on bone ingrowth.

An ageing population implies an increase in bone and dental diseases, which are in turn a source of numerous handicaps. These pathologies are an expensive burden for the European health system. As no specific bioactive materials are efficient enough to cope with this burden, we have to develop an injectable, mouldable, self-hardening bone substitute to support bone tissue reconstruction and augmentation. New, highly bioactive and suitable biomaterials have been developed to replace bone grafts in orthopedic revision and maxillofacial surgery for bone augmentation. These mouldable, self-hardening materials are based on the association of MBCP Biphasic Calcium Phosphate Granules and Tissucol Fibrin Sealant. The in vivo evaluation of ingrowth in relation to the composite was made in an experiment on rabbits. The results indicate that in the presence of fibrin sealant, newly-formed bone developed at a small distance from the surface of the calcium phosphate ceramic. Two different bone apposition processes were identified. Without the fibrin component (MBCP group), bone rested directly on the surface of the granules. This observation is commonly described as osteoconduction in calcium phosphate materials. On the contrary, the presence of the fibrinogen component seemed to modify this standard osteoconduction phenomenon: the newly-formed bone essentially grew at a distance from the surface of the granules, on the fibrillar network, and could be considered as an inductive phenomenon for osteogenic cell differentiation from mesenchymal stem cells.

Animals↗

PubMed2005

In vitro biological effects of titanium rough surface obtained by calcium phosphate grid blasting.

Surface roughness modulates the osseointegration of orthopaedic and dental titanium implants. High surface roughness are currently obtained by blasting of titanium implants with silica or aluminium oxide abrasive particles. This process may cause the release of cytotoxic silicium or aluminium ions in the peri-implant tissue. To generate a biocompatible roughened titanium surface, we currently develop an innovative grid-blasting process using biphasic calcium phosphate (BCP) particles. Titanium alloy (Ti6Al4V) discs were either polished, BCP grid-blasted or left as-machined. BCP grid-blasting created an average surface roughness of 1.57 +/- 0.07 microm compared to the original machined surface of 0.58 +/- 0.05 microm. X-ray photoelectron spectroscopy indicated traces of calcium and phosphorus and relatively less aluminium on the BCP grid-blasted surface than on the initial titanium specimen. Scanning electronic microscopy observations and measurement of mitochondrial activity (MTS assay) showed that osteoblastic MC3T3-E1 cells were viable in contact with the BCP grid-blasted titanium surface. In addition, our results indicate that MC3T3-E1 cells expressed ALP activity and conserved their responsiveness to bone morphogenetic protein BMP-2. The overall results clearly indicate that this calcium phosphate grid-blasting technique increases the roughness of titanium implants and provides a non-cytotoxic surface with regard to mouse osteoblasts.

3T3 Cells↗

PubMed2005

Novel biomaterials for bisphosphonate delivery.

One type of gem-bisphosphonate (Zoledronate) has been chemically associated onto calcium phosphate (CaP) compounds of various compositions. For that purpose, CaP powders of controlled granulometry have been suspended in aqueous Zoledronate solutions of variable concentrations. Using mainly (31)P NMR spectroscopy, two different association modes have been observed, according to the nature of the CaP support and/or the initial concentration of the Zoledronate solution. beta-tricalcium phosphate (beta-TCP) and mixtures of hydroxyapatite and beta-TCP (BCPs) appear to promote Zoledronate-containing crystals formation. On the other hand, at concentrations <0.05 mol l(-1) CDAs (calcium deficients apatites) seem to undergo chemisorption of the drug through a surface adsorption process, due to PO(3) for PO(4) exchange, that is well described by Freundlich equations. At concentrations >0.05 mol l(-1), crystalline needles of a Zoledronate complex form onto the CDAs surface. The ability of such materials to release Zoledronate, resulting in the inhibition of osteoclastic activity, was shown using a specific in vitro bone resorption model.

Animals↗

PubMed2005

In vivo bone regeneration with injectable calcium phosphate biomaterial: a three-dimensional micro-computed tomographic, biomechanical and SEM study.

This in vivo study investigated the efficiency of an injectable calcium phosphate bone substitute (IBS) for bone regenerative procedures through non-destructive three-dimensional (3D) micro-tomographic (microCT) imaging, biomechanical testing with a non-destructive micro-indentation technique and 2D scanning electron microscopy (SEM) analysis. The injectable biomaterial was obtained by mixing a biphasic calcium phosphate (BCP) ceramic mineral phase and a cellulosic polymer. The BCP particles were 200-500 microm or 80-200 microm in diameter. The injectable material was implanted for 6 weeks into critical-sized bone defects at the distal end of rabbit femurs. Extensive new bone apposition was noted with both 2D and 3D techniques. Micro-CT showed that newly formed bone was in perfect continuity with the trabecular host bone structure and demonstrated the high interconnectivity of the restored bone network. For both IBS formulations, SEM and microCT gave very close measurements. The only detected significant difference concerned the amount of newly formed bone obtained with IBS 80-200 that appeared significantly higher with microCT analysis than with SEM (p=0.00007). Student t-tests did not show any significant difference in the amount of newly formed bone and remaining ceramic obtained from microCT analysis or SEM. Regression analysis showed satisfactory correlation between both the amount of newly formed bone and remaining ceramic obtained from microCT or SEM. For IBS 200-500, the newly formed bone rate inside the defect was 28.0+/-5.2% with SEM and yield strength of the samples was 18.8+/-5.4 MPa. For IBS 80-200, the newly formed bone rate inside the defect was 31.7+/-5.1% with SEM and yield strength of the samples was 26.8+/-4.5 MPa. Yield strength appeared well correlated with the amount of newly formed bone, specially observed with microCT. This study showed the ability of non-destructive techniques to investigate biological and mechanical aspects of bone replacement with injectable biomaterials.

Animals↗

PubMed2005

Three-dimensional culture and differentiation of human osteogenic cells in an injectable hydroxypropylmethylcellulose hydrogel.

The present work evaluates a newly developed silated hydroxypropylmethylcellulose (Si-HPMC)-based hydrogel as a scaffold for 3D culture of osteogenic cells. The pH variation at room temperature catalyzes the reticulation and self-hardening of the viscous polymer solution into a gelatine state. We designed reticulation time, final consistency and pH in order to obtain an easy handling matrice, suitable for in vitro culture and in vivo injection. Three human osteogenic cell lines and normal human osteogenic (HOST) cells were cultured in 3D inside this Si-HPMC hydrogel. We show here that osteosarcoma cells proliferate as clonogenic spheroids and that HOST colonies survive for at least 3 weeks. Mineralization assay and gene expression analysis of osteoblastic markers and cytokines, indicate that all the cells cultured in 3D into this hydrogel, exhibited a more mature differentiation status than cells cultured in monolayer on plastic. This study demonstrates that this Si-HPMC hydrogel is well suited to support osteoblastic survival, proliferation and differentiation when used as a new scaffold for 3D culture and represents also a potential basis for an innovative bone repair material.

Bone Substitutes↗