Biomedical subjects

Guy Daculsi

Publications and source records attributed to Guy Daculsi.

27 records · Page 2Linked to original sources

PubMed2005

Calcium phosphate scaffold and bone marrow for bone reconstruction in irradiated area: a dog study.

Squamous cell carcinomas (SCC) of the upper aero-digestive tract are characterized by a high incidence of bone invasion; their treatment often requires large and damaging surgical resections and radiotherapy. Surgical and radiotherapeutic procedures generate irreversible effects on normal tissues, involving injuries on their reparation properties, especially on bone. The quality of life of patients undergoing major surgery and radiotherapy in maxillary and mandible areas is often reduced but could be improved by bone reconstructions. Bone reconstructions are rarely performed because surgery is complex and unsafe in irradiated bone. The aim of the study was to evaluate the bone reconstruction possibilities of macroporous biphasic calcium phosphate (MBCP) associated to autologous bone marrow (BM) graft injected after irradiation. MBCP hollowed blocks were specially designed and implanted in tibia and femur bone before irradiation in a dog model. Implants were removed after 18 weeks. This is the first report of experiments performed after radiation delivery using high fractionated doses approximating usual treatment of SCC in human. The quality of the bone adjacent to implanted MBCP and the bone ingrowth's rates were evaluated. The qualitative and quantitative role of BM grafts associated with the MBCP implants was determined, using scanning electron microscopy linked to quantitative image analysis. A direct contact between newly formed bone and MBCP implants associated to BM graft was observed, without fibrous interposition. The new-bone formation was statistically increased inside the MBCP (P=0.0126) by BM grafts. This study demonstrates that BM graft added to MBCP constitute an appropriate material to be considered in case of bone defect occurring in irradiated tissue, and could be foreseen for use after bone removal for oncologic obligations.

Animals↗

PubMed2005

Ectopic bone formation by microporous calcium phosphate ceramic particles in sheep muscles.

Calcium phosphate ceramics are widely used in bone reconstructive surgery because of their osteconductive properties. However, these materials generally lack osteoinductive properties required to support bone healing in large defects. In this article, we study the osteoinductive potential of calcium phosphate ceramic particles implanted for 6 months into the dorsal muscles of eight adult female sheep. Microporous biphasic calcium phosphate (MBCP) granules of 1-2 mm composed of hydroxyapatite and beta-tricalcium phosphate (60/40) had macropores of 450 microm, micropores of 0.43 microm, and a specific surface area of 1.8 m(2)/g. After 6 months in the back muscles of sheep, the explants composed of MBCP granules were hard and encapsulated by normal muscle tissue. Ectopic bone formation with Haversian structures was observed in close contact with the MBCP granules in histological sections. Back-scattered electron microscopy and micro-computed tomography indicated that approximately 10% of well-mineralized bone with mature osteocytes had formed between or upon the granules. The ectopic bone showed trabeculae bridging the MBCP granules. Both the number and thickness of the trabeculae formed between the MBCP particles were comparable to those measured in spongious bone. The overall results therefore confirmed the presence of mature bone after intramuscular implantation of MBCP granules. The different hypotheses explaining ectopic bone formation induced by MBCP granules are discussed. Synthetic bone substitutes with osteoinductive properties could be used in bone reconstructive surgery.

Animals↗

PubMed2005

In vitro and in vivo bactericidal activities of vancomycin dispersed in porous biodegradable poly(epsilon-caprolactone) microparticles.

Treatment of methicillin-resistant Staphylococcus aureus osteomyelitis requires a prolonged antibiotic therapy with vancomycin. Because of its weak diffusion, the in situ implantation of vancomycin could be interesting. The activity of vancomycin encapsulated in microparticles was evaluated in vitro and in vivo on rabbit osteomyelitis and showed a good activity compared to intravenous administration.

Animals↗

PubMed2004

Biphasic ceramics and fibrin sealant for bone reconstruction in ear surgery.

Bone reconstruction is still a matter of concern in middle ear surgery despite the large number of surgical techniques proposed. A composite made of biphasic calcium phosphate ceramic granules mixed with human fibrin sealant, forming a moldable material that is easy to set for bone reconstruction, has been used with success over a 16-year period for reconstruction of the posterior canal wall or for mastoid obliteration. In a retrospective series of 72 ears with long-term follow-up (average follow-up of 46 months), regular microscopic examination, and computed tomographic controls, we have evaluated this bone reconstruction technique for radical mastoidectomy cavities or the closed technique. The bone reconstruction material provided an immediate anatomic reconstruction that remains stable and is well tolerated over the long term. A slight leakage of granules in the meatus was initially observed in several patients with transient aseptic otorrhea. Fifty-seven ears were followed up for 1 year or more. Satisfactory clinical results with complete regression of the mucous membrane disease were found in 82.4% of the patients, with perfect stability of the material in 65%. We did not observe any cases of recurrent cholesteatoma in or behind the filling material. Eighteen biopsies were performed between 8 and 84 months after surgery during a second surgical step performed for functional purposes or for recurrent cholesteatoma; 17 of the 18 cases showed osteointegration of the filling material. After a 16-year experiment, we consider this technique to be a highly satisfactory procedure that could be extended to other situations of bone reconstruction.

Adolescent↗

PubMed2004

Alveolar bone regeneration for immediate implant placement using an injectable bone substitute: an experimental study in dogs.

BACKGROUND: The aim of the present study was to assess the efficacy of a ready-to-use injectable bone substitute for bone regeneration around dental implants placed into fresh extraction sockets. METHODS: Third and fourth mandibular premolars were extracted from three beagle dogs and the interradicular septa were surgically reduced to induce a mesial bone defect. Thereafter, titanium implants were immediately placed. On the left side of the jaw, mesial bone defects were filled with an injectable bone substitute (IBS), obtained by combining a polymer and biphasic calcium phosphate ceramic granules. The right defects were left unfilled as controls. After 3 months of healing, specimens were prepared for histological and histomorphometric evaluations. RESULTS: No post-surgical complications were observed during the healing period. In all experimental conditions, histological observations revealed a lamellar bone formation in contact with the implant. Histomorphometric analysis showed that IBS triggers a significant (P<0.05) increase in terms of the number of threads in contact with bone, bone-to-implant contact, and peri-implant bone density of approximately 8.6%, 11.0%, and 14.7%, respectively. In addition, no significant difference was observed when number of threads, bone-to-implant contact, and bone density in the filled defects were compared to the no-defect sites. CONCLUSION: It is concluded that an injectable bone substitute composed of a polymeric carrier and calcium phosphate significantly increases bone regeneration around immediately placed implants.

Alveolar Process↗

PubMed2003

Current state of the art of biphasic calcium phosphate bioceramics.

We have developed 15 years ago, with the collaboration of Lynch, Nery, and LeGeros in the USA, a bioactive concept based on biphasic calcium phosphate (BCP) ceramics. The concept is determined by an optimum balance of the more stable phase of HA and more soluble TCP. The material is soluble and gradually dissolves in the body, seeding new bone formation as it releases calcium and phosphate ions into the biological medium. The bioactive concept based on the dissolution/transformation processes of HA and TCP has been applied to both Bulk, Coating and Injectable Biomaterials. The events at the calcium phosphate (CaP) biomaterial/bone interface represent a dynamic process, including physico-chemical processes, crystal/proteins interactions, cells and tissue colonization, bone remodeling, finally contributing to the unique strength of such interfaces. An important literature and numerous techniques have been used for the evaluation of the fundamental physico chemical and biological performance of BCP concept. This type of artificial bone used from a long time in preclinical and in clinical trial, revealed the efficiency for bone filling, performance for bone reconstruction and efficacy for bone ingrowth at the expense of the micro macroporous BCP bioceramics.

Journal Article↗

PubMed2002

Synthesis and general properties of silated-hydroxypropyl methylcellulose in prospect of biomedical use.

Synthesis of grafting silane on a hydro soluble cellulose ether (HPMC) was described. In alkaline medium, this derivate is under gel form. With a decrease of the pH, a self-hardening occurs due to the silanol condensation. For potential biomedical use, we described the silated-HPMC synthesis, the gel behavior after steam sterilization and the parameters of the silanol condensation i.e. pH, silane percentage and temperature. Minimum kinetic of the condensation was observed for pH between 5.5 and 6.5. So temperature catalyzed the reaction and the self-hardening speed was increased by silane percentage.

Animals↗

PubMed2002

General properties of silated hydroxyethylcellulose for potential biomedical applications.

The general properties of hydroxyethylcellulose (HEC) grafted with 3-glycidoxypropyltrimethoxysilane (GPTMS) or 3-glycidoxypropylmethyldiethoxysilane (GPDMS) were studied for potential biomedical applications. The graft involved a Williamson reaction between the free hydroxyl function of HEC and the epoxy function of the two silanes. As the grafted silanes are in ionic form (sodium silanolate), this product remains in gel form at basic pH (>12.3) in aqueous solution. When pH decreases, sodium silanolate is transformed into silanol (2 or 3 silanol functions are carried by silicon, depending on the silane grafted). The silanols interreact, and the gel is transformed into a cross-linking form at room or body temperature. Studies were conducted to optimise this product for specific uses. Steam sterilization was used to compare self-hardening as a function of the silane grafted. Our previous work indicated that HEC grafted with GPTMS has good reactivity, but requires high pH for dissolution, whereas dissolution occurs at lower pH with GPMDS. The rate of silanol condensation for silated HEC was then determined as a function of pH, temperature, type of silane, and the percentage grafted. Condensation rates were ascertained by the viscosity method, and gels were neutralized by different solutions to obtain buffered forms at various pH. The time required to obtain 10(5) mPa x s, with an initial state of 2500 mPa x s, was then calculated. Condensation was catalysed in acid or basic medium at a lower rate at pH 5.5-6.5, and a temperature rise increased the condensation rate, regardless of the pH or silane studied. Silanetriol was more reactive than silanediol. However, as HEC lost considerable viscosity after sterilization, further studies will be conducted to develop new polysaccharides grafted with silane.

Biocompatible Materials↗

PubMed2002

[Non-invasive evaluation of an injectable bone substitute].

Despite the increasing number of techniques for the preservation of bone ridges after dental avulsion, no precise evaluation of alveolar filling has been performed to date. The criteria of available measurement techniques (probes, retroalveolar or panoramic radiography, and lateral teleradiography) are not sufficiently reliable and precise. This study investigated the reliability of evaluation based on CT images in comparison with retroalveolar radiography (the most precise radiographic technique, providing standardised images), direct measurements, and images obtained in scanning electron microscopy. After a preliminary investigation ex vivo, a study was performed in vivo on three beagles. Mandibular premolars were extracted, and the corresponding alveoli were filled with an injectable bone substitute composed of a calcium phosphate mineral load associated with hydroxypropyl methylcellulose. Measurements performed on CT images relative to visual and automatic detection of density changes and studies of density curves provided better precision than those obtained by retroalveolar radiography.

Animals↗