PubMed Health⌕ Search

Biomedical subjects

H Planck

Publications and source records attributed to H Planck.

At least 19 recordsLinked to original sources
PubMed2006

Suprathel-an innovative, resorbable skin substitute for the treatment of burn victims.

Autologous split skin grafts are the most reliable method for closing third degree burns. Under this scheme, donor sites as well as second degree burns under conservative treatment, however, would benefit from rapid wound closure. For this treatment, biological as well as synthetic materials are available. For the improvement of these materials, primary goals are pain reduction and easy handling in the absence of biological risk. From a synthetic copolymer mainly based on DL-lactic acid a new skin substitute was developed, marketed as Suprathel. Within the scope of a bicentric study Suprathel was compared versus paraffin gauze intraindividually applied on split skin donor sites. Wound pain was measured on the Visual Pain Analog Scale over a period of 10 days as the critical criterion. Accordingly Suprathel versus Omiderm were compared on second degree burns (degree 2a, partial thickness burns). In both study parts, Suprathel significantly reduced pain. Its easy handling was superior compared to other materials. The Suprathel membrane adhered rapidly to the wound thus protecting against infections and promoting wound healing. No allergic reactions were observed. The ability of the material to resorb ensured pain-free removal after complete healing of the wound.

Adult↗
PubMed2004

Acoustomechanical properties of open TTP titanium middle ear prostheses.

OBJECTIVE: The purpose of the study was to identify acoustcomechanical properties of various biostable and biocompatible materials to create a middle ear prosthesis with the following properties: (i) improved handling including a good view of the head of the stapes or footplate and adjustable length, (ii) improved acoustical characteristics that are adequate for ossiculoplastic. The identified material should serve to build CE and FDA approved prostheses for clinical use in patients. METHODS: Test models made of Teflon, polyetheretherketone, polyethylenterephtalate, polysulfone, gold, Al2O3 ceramics, carbon and titanium were investigated for their potential to fulfill the requirements. Acoustical properties were investigated by laser Doppler velocimetry (LDV) in mechanical middle ear models (MMM). Measured data were fed in to a recently created computer model of the middle ear (multibody systems approach, MBS). Using computer-aided design (CAD) measured and computed data allowed creation and fine precision of titanium prostheses (Tübingen Titanium Protheses, TTP). Their handling was tested in temporal bones. Acoustomechanical properties were investigated using the MBS and mechanical middle ear models. MAIN OUTCOME MEASURES: Input impedance, mass, stiffness, and geometry of test models and prostheses were determined. Furthermore, their influence on the intraprosthetic transfer functions and on coupling to either tympanic membrane or stapes was investigated. RESULTS: Final results were FDA- and CE-approved filigreed titanium prostheses with an open head that fulfilled the four requirements detailed above. The prostheses (TTP) were developed in defined lengths of between 1.75 and 3.5 mm (partial) and 3.0 and 6.5 mm (total) as well as in adjustable lengths (TTP-Vario). CONCLUSIONS: The results suggest acoustomechanical advantages of TTPs because they combine a significantly low mass with high stiffness. In contrast to closed prostheses, the open head and filigreed design allow an excellent view of the prosthesis foot during coupling to the head or footplate of stapes, contributing to an improved intraoperative reliability of prosthesis coupling.

Acoustics↗
PubMed2002

Cultivation of porcine hepatocytes in polyurethane nonwovens as part of a biohybrid liver support system.

Many patients suffering from end-stage liver disease cannot be transplanted within reasonable time due to the shortage of donor organs. Bioartificial liver support systems may contribute to the liver regeneration or bridging the time until a liver graft for transplantation becomes available. Nonwovens with integrated oxygenation capacity have been developed and manufactured by melt blow technology using thermoplastic polyurethane. Capillary membranes for oxygenation were integrated into the nonwoven during the processing. The polyurethane nonwoven structures with adapted pore size and high pore volume allow high cell densities in the hepatocyte culture. The three-dimensional cell culture was housed by a flow bioreactor system and was integrated in a closed loop circulation with monitoring possibilities for pressure, pH, temperature, ammonia, and oxygen. Hepatocytes were isolated from rats or pigs by collagenase perfusion and infused into the medium-perfused circulation. Cells showed high viability and hepatocyte specific cytochrome P450-dependent metabolic function in culture (MEGX test).

Albumins↗
PubMed2001

Resorbable polymer fibers for ligament augmentation.

Resorbable augmentation devices for cruciate ligament surgery have been developed to temporarily protect healing tendon grafts or sutured ligaments against high tensile loads during the postoperative healing period. Materials available at present [e.g., polydioxanone (PDS)] show a half-life tensile strength of only 4-6 weeks, whereas the process of revitalization and recovering of the transplanted tendon graft can take up to 12 months. Therefore, a device that provides gradually decreasing mechanical properties with a half-time strength of at least 6 months would be desirable. In order to obtain a suitable material, we investigated the degradation kinetics of a variety of different resorbable fibers made of poly(L-lactide) and poly(L-lactide-co-glycolide). The fiber materials differed in processing and treatment parameters like thermal posttreatment, irradiation, and fiber diameter. The fibers were degraded in vitro and were tested for mechanical properties and molecular weight at various time points up to 72 weeks. The half-time strength of the materials ranged between 5 and 64 weeks, depending on their treatment parameters. In contrast, the stiffness did not decrease adequately. However, an augmentation stiffness that does not change much versus time could not provide a gradual increase in graft load, which is important to stimulate the orientation of the collagenous tissue. Therefore, design of an augmentation construct braided out of more than one quickly degrading fiber materials is suggested. After the breakdown of the faster-degrading fiber components the stiffness would automatically decrease by the diminution of the load-carrying fiber volume.

Absorbable Implants↗
PubMed2001

Macroencapsulation of rat islets without alteration of insulin secretion kinetics.

Transplantation of encapsulated islets may restore endogenous insulin secretion in type 1 diabetics with no need of lifetime immunosuppression of the recipient. A biomaterial should be developed which combined immunoisolation with rapid and efficient diffusion of glucose and insulin. Rat islets were macroencapsulated in capillaries (molecular cut off 50 kD) of differently modified polysulphone. Macroencapsulated islets were perifused to study the kinetics of glucose induced insulin secretion into the perifusion medium. Blending polysulphone (PSU) with poly vinyl pyrrolidone or sodium dodecyl sulphate was not suited for islet macroencapsulation since glucose induced insulin release was absent after encapsulation. Hydroxy methylation (CH2OH) of PSU improved the secretory behaviour of macroencapsulated islets depending on the degree of substitution (DS). At 0.8 DS glucose induced insulin secretion was delayed and inefficient. At maximal degrees of PSU-substitution (1.8) the kinetics of insulin release and the efficiency of insulin release were very similar to that observed of free floating islets. In conclusion, highly substituted hydroxy methylated polysulphone allows a rapid and efficient insulin release after macroencapsulation and is suited for the further development of a bioartificial pancreas.

Animals↗
PubMed2001

In vitro test of new biomaterials for the development of a bioartificial pancreas.

The implantation of macroencapsulated islets has the potential to restore endogenous insulin secretion in type 1 diabetics, with no need for lifetime immunosuppression. To match the physiological fluctuations of blood glucose concentrations with appropriate insulin release, the macroencapsulation material must combine immunoprotection with optimal diffusion properties for glucose and insulin. The impact of chemical modifications of polysulphone (PSU) capillary polymers with a cutoff of 50 kD on glucose-induced insulin secretion of macroencapsulated rat islets was studied in perifusion experiments. The insulin release of free-floating islets showed the typical rapid response to glucose stimulation. Total insulin release (AUC between minute 30 and 120 of perifusion) reached 117+/-22 ng/ml. Blending PSU with polyvinylpyrrolidone or sodium-dodecyl-sulfate was not suitable for islet macroencapsulation, since glucose-induced insulin release was absent or disturbed. Hydroxy-methylation (CH2OH) of PSU improved the secretory behavior of macroencapsulated islets depending on the degree of PSU substitution (DS 0.8, AUC 62+/-15 ng/ml; DS 1.8, 111+/-24 ng/ml). In highly substituted PSU-capillaries the kinetics of glucose-induced insulin release was very similar to that observed in free-floating islets. Two consecutive glucose stimulations potentiated insulin release of free-floating islets during the second period of stimulation. Furthermore, freshly isolated macroencapsulated islets responded with more efficient insulin secretion after the initial priming. In conclusion, in vitro membrane screening identified highly substituted hydroxy-methylated PSU as the material of choice for islet encapsulation in a bioartificial pancreas.

Animals↗
PubMed2001

High density culturing of porcine hepatocytes immobilized on nonwoven polyurethane-based biomatrices.

OBJECTIVE: Hepatocytes are increasingly used as functional units in bioartificial liver devices. The objective of the present study was to investigate the feasibility of culturing porcine hepatocytes in high density on a novel polyurethane-based nonwoven three-dimensional matrix. We investigated (1) the optimal cell density within this culture configuration, (2) the maintenance of liver-specific morphology and cell functions over long-term periods and (3) the necessity to apply an additional extracellular matrix component (collagen gel). METHODS: Nonwoven polyurethane matrices were manufactured by a specially developed fiber extrusion technology. Pig hepatocytes were cultured at various cell densities of 0.1, 0.25, 0.5, 0.75, 1 and 2 x 10(6) cells/cm(2) on three-dimensional networks of nonwoven polyurethane matrices and cell adhesion as well as functional parameters (DNA of nonattached/attached cells, lactate dehydrogenase release and cytochrome P450 activity) were determined. To assess the performance of cells within this configuration albumin and urea excretion was measured over 8 days. The potentially beneficial effect of an additional extracellular matrix configuration was evaluated by comparing the average albumin synthesis in groups of identical cell numbers. RESULTS: The optimal cell density in this three-dimensional culture configuration was 1 x 10(6) cells/cm(2). The functional capacity of hepatocytes was stable for 8 days at an average level of 53.7 +/- 5.6 ng/h/microg DNA and of 1.8 +/- 0.14 microg/h/microg DNA for albumin and urea excretion, respectively. The supplementation of an extracellular matrix configuration did not improve functional activity of cells. Average albumin synthesis was 35.6 ng/h/microg DNA (28.7, 42.8) and 32.7 ng/h/microg DNA (23.4, 49.2) for collagen-immobilized and control cultures, respectively. CONCLUSION: The results of the study indicate that nonwoven polyurethane sheets supply a biocompatible support structure for functionally active high density cultures. Thus, nonwoven polyurethane matrices should be further investigated on with respect to their role in the development, optimization and design of bioartificial liver systems.

Animals↗
PubMed2000

New non-woven polyurethane-based biomaterials for the cultivation of hepatocytes: expression of differentiated functions.

A new non-woven polyetherurethane support suitable to host cultured hepatocytes has been developed. Prior to its use in bioreactors and artificial liver devices, the biocompatibility of this new material was investigated. The experiments have shown that the survival and functionality of hepatocytes entrapped in the non-woven polymer were longer than that of monolayer cultured hepatocytes, under serum-free culture conditions. Hepatic specific metabolic functions, namely, synthesis of urea and synthesis and secretion of plasma proteins, were well maintained by hepatocytes entrapped in non-woven polyetherurethane sheets. Cells also retained the expression of biotransformation activities of 7-ethoxycoumarin-O-deethylase as well as CYP2A1, CYP2B1 and CYP3A1. The results presented in this paper point to non-woven polyetherurethane sheets as a suitable biocompatible support for functional, three-dimensional hepatocyte cultures.

Journal Article↗
PubMed2000

Guided bone regeneration around endosseous implants using a resorbable membrane vs a PTFE membrane.

The aim of the present experimental pilot study was to assess bone regeneration underneath resorbable barrier membranes vs non-resorbable extended polytetrafluoroethylene (ePTFE) membranes in peri-implant defects. Two implants were inserted into surgically created defects on each side of the mandibles of 6 adult beagle dogs 3 months after extraction of all premolar teeth. One implant on each side was covered with a porous polylactic acid membrane or a ePTFE membrane, respectively, while the second implant served as control. Fluorochrome labelling was administered during the 1st, 5th, 12th and the 18th week. Three animals each were evaluated after 3 and 6 months. Bone regeneration was assessed by measuring the distance from the first fluorochrome label to the level of the regenerated bone immediately adjacent to the implant surface and to the top of the newly formed alveolar contour both on the lingual and buccal side. The increase in bone height was significantly higher compared to the controls under both barrier membranes after 3 months at the top of the alveolar crest but not immediately adjacent to the implant surface. After 6 months, bone height was significantly increased only at the top of the alveolar contour underneath the ePTFE membranes, while bone underneath the polylactic acid membranes showed signs of superficial resorption. It is concluded that guided bone regeneration underneath barrier membranes can restore alveolar bone contour but is not necessarily associated with a higher bone/implant contact. The use of resorbable membranes may be associated with untoward biological effects at later stages, when membrane degradation starts due to degradation products of the polymer material or decreasing membrane stability. Future efforts have to refine the relation between degradation kinetics, membrane porosity and mechanical properties of degradable barrier membranes to improve membrane performance.

Absorbable Implants↗
PubMed1999

Biohybride nerve guide for regeneration: degradable polylactide fibers coated with rat Schwann cells.

The restricted capacity of the nervous system to regenerate calls for novel therapeutic concepts. We have tested biocompatible polylactide fibers as potential nerve guides that could bridge proximal nerve stumps and synaptic target regions after nerve lesion. Polylactides have the great advantage that they degrade and resorb after completion of regeneration. Material surface properties were optimized three-fold by oxygen plasma treatment, polyanion coating and the seeding of Schwann cells from rat sciatic nerve. Immunocytochemistry and scanning electron microscopy revealed that in vitro axonal outgrowth of dorsal root ganglia on two specifically synthesized lactide polymers can be greatly improved by these surface treatments. The approach aims to develop an 'intelligent neuroprosthesis' that in vivo facilitates directed axonal regrowth in the first place and disappears thereafter.

Animals↗
PubMed1998

Cartilage reconstruction in head and neck surgery: comparison of resorbable polymer scaffolds for tissue engineering of human septal cartilage.

New cell culture techniques raise the possibility of creating cartilage in vitro with the help of tissue engineering. In this study, we compared two resorbable nonwoven cell scaffolds, a polyglycolic acid/poly-L-lactic acid (PGA/PLLA) (90/10) copolymer (Ethisorb) and pure PLLA (V 7-2), with different degradation characteristics in their aptitude for cartilage reconstruction. Chondrocytes were isolated enzymatically from human septal cartilage. The single cells were resuspended in agarose and transferred into the polymer scaffolds to create mechanical stability and retain the chondrocyte-specific phenotype. The cell-polymer constructs were then kept in perfusion culture for 1 week prior to subcutaneous transplantation into thymusaplastic nude mice. After 6, 12, and 24 weeks, the specimens were explanted and analyzed histochemically on the presence of collagen (azan staining), proteoglycans (Alcian blue staining), and calcification areas (von Kossa staining). Furthermore, different collagen types (collagen type I, which is found in most tissues, but not in hyaline cartilage matrix; and collagen type II, which is cartilage specific) were differentiated immunohistochemically by the indirect immunoperoxidase technique. Vascular ingrowth was investigated by a factor VIII antibody, which is a endothelial marker. Quantification of several matrix components was performed using the software Photoshop. Significant differences were found between both nonwoven structures concerning matrix synthesis and matrix quality as well as vascular ingrowth. Ethisorb, with a degradation time of approximately 3 weeks in vitro, showed no significant differences from normal human septal cartilage in the amount of collagen types I and II 24 weeks after transplantation. Thin fibrous tissue layers containing blood vessels encapsulated the transplants. V 7-2 constructs, which did not show strong signs of degradation even 24 weeks after transplantation, contained remarkably smaller amounts of cartilage-specific matrix components. At the same time, there was vascular ingrowth even in central parts of the transplants. In conclusion, polymer scaffolds with a short degradation time are suitable materials for the development of cartilage matrix products, while longer stability seems to inhibit matrix synthesis. Thus, in vitro engineering of human cartilage can result in a cartilage-like tissue when appropriate nonwovens are used. Therefore, this method could be the ideal cartilage replacement method without the risk of infection and with the possibility of reconstructing large defects with different configurations.

Adult↗
PubMed1998

Resorbable continuous-fibre reinforced polymers for osteosynthesis.

Four institutes from three countries in the European Union have collaborated under the BRITE-EURAM framework programme for the development of processing technologies for resorbable osteosynthesis devices. The devices should be continuous-fibre reinforced, and the technology should offer the possibility of orienting the fibres in the main trajectories. Poly-L-lactide and poly-L-DL-lactides have been synthesized for reinforcement fibres and matrix material, respectively. Melt-spun P-L-LA fibres of a strength of 800 MPa have been embedded in an amorphous P-L-DL-LA 70 : 30 matrix by compression moulding. Ethyleneoxide sterilized samples have been tested in vitro and in vivo. A satisfying bending modulus has been reached (6 GPa). Yet with 50% strength retention after ten weeks, fast degradation occurred that could be related to residual monomers. By this fast degradation 70% resorption after one year could be observed in the non-functional animal studies in rabbits. There was only a mild inflammatory reaction, which confirmed the good biocompatibility of the materials even during the resorption period. Further effort has to concentrate on the reduction of initial monomer content. The great advantage of the processing method to orient fibres in the device will be utilized in prototype samples, e.g. an osteosynthesis plate with fixation holes.

Journal Article↗
PubMed1996

Resorbable polyesters in cartilage engineering: affinity and biocompatibility of polymer fiber structures to chondrocytes.

The resorbable polymers polyglycolic acid (PGA) and polylactic acid (PLA) are gaining increasing importance in tissue engineering and cell transplantation. The present investigation was focused on the biocompatibility and cell retaining behavior of PGA/poly-L-lactide (PLLA) (90/10) and PLLA nonwoven structures for the in vitro development of chondrocyte-polymer constructs. The effect of the relevant monomers to chondrocytes was analyzed. Type II collagen and poly-L-lysine were compared to improve loading of PGA/PLLA and PLLA polymer nonwovens with chondrocytes. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetra-zoliumbrom ide (MTT) test was applied for quantification. At concentrations above 2 mg/mL, glycolic acid was more cytotoxic than lactic acid. As shown by pH equilibration, the cytotoxic effect is not due merely to the acidity of the alpha-hydroxy acids. Regarding the degradation products, glycolic acid, and L(+) lactic acid, nonwovens of PLLA are more biocompatible with chondrocytes than nonwovens of polyglycolide. Collagen type II and poly-L-lysine generally improved cell seeding on resorbable polymers in tissue engineering; however, their efficiency varies depending on the type of fiber structure.

Adult↗
PubMed1995

[Epithelialization of porous biomaterials with isolated respiratory epithelial cells in vivo].

Extensive tracheal defects after prolonged assisted ventilation, trauma or large resections in tumor surgery are a challenge in plastic and reconstructive surgery. Defects which cannot be satisfactorily repaired reguine near of an alloplastic tracheal replacement. Previous experimental and clinical experiences in the development of an alloplastic tracheal prosthesis have demonstrated that the main cause for failure is the lack of an epithelial lining of luminal surfaces and inadequate biophysical properties of the prosthesis. With the use of a cell-seeding technique tested in vitro on biomaterials epithelialization of tracheal prostheses can be tested in vivo. In animal experiments isolated respiratory cells were seeded into implanted tubular prostheses of porous polyurethane or expanded polytetrafluorethylene. Light and scanning microscopic investigations then showed the tendency of epithelialization to occur on the luminal surfaces. Vigorous squamous epithelium cell layers that were single and (predominantly) multiple layers were found. Differentiated cilated or mucous cells were not detected in any case. The present results have shown that epithelialization of incorporated porous implants is possible. The realization of usable tracheal replacement for clinical practice must still be tested in further experiments.

Animals↗
PubMed1990

Protection of islets of Langerhans from interleukin-1 toxicity by artificial membranes.

Recently it has been reported that interleukin 1 may play a central role in the immune destruction of islets. Since the mass weight of interleukin-1 is close to that of insulin, destruction of transplanted islets may be possible although they are enclosed in membranes that prevent penetration by immune-competent cells and cyto-toxic antibodies. The present in vitro study showed that the encapsulated rat islets are protected from high doses of IL-1 (1000 ng) inside a hollow fiber membrane with a cutoff of 50,000 D. The function of islets in a free-floating culture, however, was suppressed in a dose-dependent manner (1000 ng/L; 20-30% of controls). Histologically, no damage of the free-floating or encapsulated islets was observed at 1000 ng of IL-1-containing medium. Islets washed out of the devices after 2 days of exposure to IL-1 showed no difference in glucose-stimulated insulin release when compared with islets not exposed that were kept in free-floating culture. It is suggested that an unspecific coating of the membranes by serum proteins (containing physiological IL-1 antagonists) may cause the protective effect.

Animals↗
PubMed1990

Experiments on a new hollow fiber membrane for immuno isolated transplantation of islets of Langerhans.

Immunoisolated transplantation of xenogeneic islets could solve problems concerning the immunology of islet transplantation. This study presents results from in vitro and in vivo experiments in rodents by the use of a PEEK-hollow fiber. Glucagon secretion of encapsulated islets during a 48-hour-culture period sustained on the same level from day 2 to 28. There were no significant differences in glucose (16.7 mmol/l)-stimulated insulin release after 6, 14 or 28 days in culture. Contrary, intraperitoneal transplantation of 800 encapsulated islets resulted in a normoglycemia of 3.8 days (medium survival time) which was similar to that of not encapsulated controls. It was concluded that a more open ultrastructure of the membrane tested could result in a minimization of the diffusion distance and overcome principle geometric problems of the hollow fiber model.

Animals↗