Biomedical subjects

Hanfa Zou

Publications and source records attributed to Hanfa Zou.

80 records · Page 5Linked to original sources

PubMed2002

Study of competitive binding of enantiomers to protein by affinity capillary electrochromatography.

Affinity capillary electrochromatography (CEC) with zonal elution method was used to probe the competitive interactions of enantiomers with protein. In this approach, a known concentration of a competing agent is continuously applied to a CEC column with bovine serum albumin (BSA) physically adsorbed on SAX packing while injections of a small amount of analyte are made. The binding sites of solutes on the BSA molecule were determined by the changes in the retention factors of the solutes resulted from the addition of competitive agent. By using D- or L-tryptophan as competitive agents and D-, L-tryptophan and benzoin enantiomers as injected analytes showed that BSA molecule has a primary site to strongly bind L-tryptophan, but D-tryptophan dose not bind at this site; D- and L-tryptophan share a weak binding site on the BSA molecule. Benzoin enantiomers do not share any binding sites with either D- or L-tryptophan. Non-chiral compounds of trichloroacetic acid and n-hexanoic acid were applied as the competitive agents to study the binding of warfarin enantiomers to BSA, it was observed that trichloroacetic acid and n-hexanoic acid had a same binding site for warfarin enantiomers binding to BSA molecule.

Binding, Competitive↗

PubMed2002

Separation of peptides on mixed mode of reversed-phase and ion-exchange capillary electrochromatography with a monolithic column.

The mixed mode of reversed phase (RP) and strong cation-exchange (SCX) capillary electrochromatography (CEC) based on a monolithic capillary column has been developed. The capillary monolithic column was prepared by in situ copolymerization of 2-(sulfooxy)ethyl methacrylate (SEMA) and ethylene dimethacrylate (EDMA) in the presence of porogens. The sulfate group provided by the monomer SEMA on the monolithic bed is used for the generation of the electroosmotic flow (EOF) from the anode to the cathode, but at the same time serves as a SCX stationary phase. A mixed-mode (RP/SCX) mechanism for separation of peptides was observed in the monolithic column, comprising hydrophobic and electrostatic interaction as well as electrophoretic migration at a low pH value of mobile phase. A column efficiency of more than 280,000 plates/m for the unretained compound has been obtained on the prepared monoliths. The relative standard deviations observed for t(0) and retention factors of peptides were about 0.32% and less than 0.71% for ten consecutive runs, respectively. Effects of mobile phase compositions on the EOF of the monolithic column and on the separation of peptides were investigated. The selectivity on separation of peptides in the monolithic capillary column could be easily manipulated by varying the mobile phase composition.

Chromatography, High Pressure Liquid↗

PubMed2002

Separation of enantiomers by nanoliquid chromatography and capillary electrochromatography using a bonded cellulose trisphenylcarbamate stationary phase.

A cellulose trisphenylcarbamate-bonded chiral stationary phase was applied to nano-liquid chromatography (nano-LC) and capillary electrochromatography (CEC) with nonaqueous and aqueous solutions as the mobile phases. Several chiral compounds were successfully resolved on the prepared phase by nano-LC. The applicability of nonaqueous CEC on a cellulose derivative stationary phase was investigated with the organic solvents methanol, hexane, 2-propanol, and tetrahydrofuran (THF) containing acetic acid, as well as triethylamine as the mobile phases. Enantiomers of warfarin and praziquantel were baseline-resolved with plate numbers of 82,300 and 38,800 plates/m, respectively, for the first eluting enantiomer. The influence of applied voltage, concentration of nonpolar solvent, apparent pH, and buffer concentration in the mobile phase on the electroosmotic flow (EOF) and the mobility of the enantiomers was evaluated. Enantioseparations of trans-stilbene oxide and praziquantel were also achieved in aqueous CEC with plate numbers of 111,100 and 107,400 plates/m, respectively, for the first eluting enantiomer. A comparison between nonaqueous CEC and aqueous CEC based on a cellulose trisphenylcarbamate stationary phase was discussed. Pressure-assisted CEC was examined for the chiral separation of praziquantel and faster analysis with high enantioselectivity was acquired with the proper pressurization of the inlet vial.

Carbamates↗

PubMed2002

Recent progress in adsorbed stationary phases for capillary electrochromatography.

This review surveys the recent progress in the adsorbed stationary phases for capillary electrochromatography (CEC). Adsorption-based methods for preparation of stationary phase are novel approaches in CEC, which allow rapid and facile preparing stationary phases with desirable selectivity onto an open-tubular fused-silica capillary, a bare-silica or ion-exchange packed column or a monolithic silica or polymer column. A variety of adsorbing agents have been developed as adsorbed stationary phases, including ionic long-chain surfactant, protein, peptide, amino acid, charged cyclodextrin (CD), basic compound, aliphatic ionene, and ion-exchange latex particle. The adsorbed stationary phases have been applied to separation of neutral, basic and acidic organic compounds, inorganic anions and enantiomers. They have also been applied to on-line sample concentration, fast separation and study of the competitive binding of enantiomers with protein.

Adsorption↗

PubMed2002

Synthesis of chemically bonded cellulose trisphenylcarbamate chiral stationary phases for enantiomeric separation.

Cellulose trisphenylcarbamate is regioselectively bonded to 3-aminopropyl silica gel and underivatized silica gel, respectively, at the 6-position of the primary hydroxyl group on the glucose unit of cellulose with 4,4'-diphenylmethane diisocyanate (DPDI) as a spacer. Enantioseparations are evaluated on these prepared chiral stationary phases (CSPs) with several organic acids as the modifiers in the mobile phase by high-performance liquid chromatography. The influence of the amount of DPDI used on chiral resolution is investigated. Also, the corresponding coated-type phase is also prepared for the aim of comparison. It is observed that the bonded-type phase shows a lower chiral recognition power but a better column efficiency than the coated-type phase under the liquid chromatographic mobile phase with hexane-alcohol. However, the bonded-type CSPs are compatible with a wider number of solvents such as tetrahydrofuran (THF) or chloroform, which generally result in the solubility or swelling of the cellulose derivatives on the coated-type CSPs. The results obtained from this study indicate that the bonded-type CSP may provide complementary enantioselectivity over the coated-type phase by adopting THF as a component in the mobile phase.

Journal Article↗

PubMedDate not supplied

Molecular imprinting of nitrophenol and hydroxybenzoic acid isomers: effect of molecular structure and acidity on imprinting.

Three nitrophenol isomer-imprinted polymers were prepared under the same conditions using 4-vinylpyridine as a functional monomer. Different recognition capacities for template molecules were observed for the three polymers. Another imprinting system with stronger acidity than nitrophenol isomers, 2-hydroxybenzoic acid (salicylic acid) and 4-hydroxybenzoic acid, was imprinted using 4-vinylpyridine or acrylamide as functional monomer respectively. Both 4-hydroxybenzoic acid-imprinted polymers using the two monomers showed recognition ability for the template molecule. However, when acrylamide was chosen as functional monomer, the salicylic acid-imprinted polymer showed very weak recognition for the template molecule, whereas strong recognition ability of the resultant polymer for salicylic acid was observed with 4-vinylpyridine as functional monomer. It seems that the structure and acidity of template molecules is responsible for the difference in recognition, by influencing the formation and strength of interaction between template molecule and functional monomer during the imprinting process. An understanding of the mechanism of molecular imprinting and molecular recognition of MIPs will help to predict the selectivity of MIPs on the basis of template molecule properties.

Chromatography, High Pressure Liquid↗

PubMedDate not supplied

Application of cross-linked beta-cyclodextrin polymer for adsorption of aromatic amino acids.

Beta-cyclodextrin (beta-CyD) was cross-linked by hexamethylene diisocyanate and the polymer was investigated for adsorption of aromatic amino acids (AAA) from phosphate buffer. High adsorption rates were observed at the beginning and the adsorption equilibrium was then gradually achieved in about 45 min. The adsorption of AAA decreased with the increase of initial concentration and also temperature. Under the same conditions, the adsorption efficiencies of AAA were in the order of L-tryptophan (L-Trp) > L-phenylalanine (L-Phe) > L-tyrosine (L-Tyr). Much higher adsorption values, up to 52.4 and 43.0 mg/g for L-Trp and L-Phe, respectively, at 50 mmol/L and 3.2 mg/g for L-Tyr at 2 mmol/L, were obtained with the beta-CyD polymer at 37 degrees C. It was shown that the adsorption of AAA on the beta-CyD polymer was consistent with the Freundlich isotherm equation. The adsorption of mixed aromatic amino acids and branched-chain amino acids (BCAA) showed that AAA were preferentially adsorbed with adsorption efficiencies 10-24%, while those of BCAA were lower than 2%. It seems that the structure and hydrophobicity of amino acid molecules are responsible for the difference in adsorption, by influencing the strength of interactions between amino acid molecule and the polymer.

Adsorption↗

PubMedDate not supplied

Biological fingerprinting analysis by liquid chromatography/mass spectrometry for evaluation of DNA structural selectivity of multiple compounds in natural products.

A method by combination of centrifugal ultrafiltration (CUF) sampling with liquid chromatography-mass spectrometry (LC-MS) analysis was established to evaluate the DNA structure and sequence selectivity of the multiple compounds in a small molecule library. The developed method was applied to analyze the extracts of natural products Coptis chinensis Franch and Rheum palmatum (L.). From the obtained biological fingerprinting chromatograms, 7 compounds in C. chinensis Franch and 11 in R. palmatum (L.) were screened out as DNA binding agents. Most of these compounds were identified by standards and LC-MS analysis after the sample pretreatment with the DNA immobilized cartridge. DNA structural binding preference of the multiple active compounds in these two extracts was then evaluated simultaneously without purification.

Binding Sites↗