PubMed Health⌕ Search

Biomedical subjects

Insung S Choi

Publications and source records attributed to Insung S Choi.

At least 19 recordsLinked to original sources

Formation of superhydrophobic surfaces by biomimetic silicification and fluorination.

The amazing water repellency of many biological surfaces, exemplified by lotus leaves, has recently received a great deal of interest. These surfaces, called superhydrophobic surfaces, exhibit water contact angles larger than 150 degrees and a low contact angle hysteresis because of both their low surface energy and heterogeneously rough structures. In this paper, we suggest a biomimetic method, "biosilicification", for generating heterogeneously rough structures and fabricating superhydrophobic surfaces. The superhydrophobic surface was prepared by a combination of the formation of heterogeneously rough, nanosphere-like silica structures through biosilicification and the formation of self-assembled monolayers of fluorosilane on the surface. The resulting surface exhibited the water contact angle of 160.1 degrees and the very low water contact angle hysteresis of only 2.3 degrees, which are definite characteristics of superhydrophobic surfaces. The superhydrophobic property of our system probably resulted from the air trapped in the rough surface. The wetting behavior on the surface was in the heterogeneous regime, which was totally supported by Cassie-Baxter equation.

Biomimetic Materials↗

Protein nanopatterns and biosensors using gold binding polypeptide as a fusion partner.

An efficient strategy for immobilizing proteins on a gold surface was developed by employing the gold binding polypeptide (GBP) as a fusion partner. Using the enhanced green fluorescent protein (EGFP), severe acute respiratory syndrome coronavirus (SARS-CoV) envelope protein (SCVme), and core streptavidin (cSA) of Streptomyces avidinii as model proteins, specific immobilization of the GBP-fusion proteins onto the gold nanoparticles and generation of protein nanopatterns on the bare gold surface were demonstrated. The GBP-fused SCVme bound to gold nanoparticles successfully interacted with its antibody and showed changes in absorbance and color, allowing efficient diagnosis of SARS-CoV. The fusion proteins could be successfully immobilized on the gold surface by nanopatterning and microcontact printing as examined by atomic force microscopy and surface plasmon resonance analysis. The poly(dimethylsiloxane) microfluidic channels were created on the gold surface and were used for antigen-antibody and DNA-DNA interaction studies. Specific immobilization of GBP-EGFP fusion protein and its interaction with the antibody in the microchannels could be demonstrated. By immobilizing the DNA probe through the use of GBP-fused cSA, specific hybridization of the target DNA prepared from Salmonella could also be achieved. The GBP-fusion method allows immobilization of proteins onto the gold surface without surface modification and in bioactive forms suitable for studying protein-protein, DNA-DNA, and other biomolecular interaction studies. Furthermore, these studies can be carried out in a microfluidic system, which allows high-throughput analysis of biomolecular interactions.

Biological Assay↗

Fluoro-N,N,N',N'-tetramethylformamidinium hexafluorophosphate: a reagent for formation of interchain carboxylic anhydrides on self-assembled monolayers.

In this paper, we report the reactivity of fluoro-N,N,N',N'-tetramethylformamidinium hexafluorophosphate (TFFH), a reagent for transformation of carboxylic acids into acid fluorides in solution, toward self-assembled monolayers (SAMs) of 16-mercaptohexadecanoic acid on gold. Contrary to the solution-based reactions, we found that only interchain carboxylic anhydrides (ICAs), not acid fluorides (AFs), were obtained at surfaces by the facile interchain reaction under most reaction conditions studied. AFs were found to be formed only when tetrabutylammonium fluoride, a reagent inducing fast decomposition of ICAs, was added to the reaction mixture. The reactivity of TFFH toward carboxylic acid-terminated SAMs was different from that of cyanuric fluoride, which has been reported previously (Langmuir 2005, 21, 11765-11772). This study provides more insight into the role of the proximity effect in SAM-based reactions as well as another approach to the formation of ICAs from carboxylic acid-terminated SAMs.

Journal Article↗

Reactivity control of carboxylic acid-terminated self-assembled monolayers on gold: acid fluoride versus interchain carboxylic anhydride.

Reactions that occur at interfaces often show different behaviors from their solution analogues. In this paper, we demonstrated how proximity effect, one of the unique phenomena at interfaces, could control the product distributions of interfacial reactions. Self-assembled monolayers (SAMs) of 16-mercaptohexadecanoic acid on gold surfaces were treated with cyanuric fluoride and pyridine, which are generally used for forming acid fluorides from carboxylic acids in the solution-based reaction. After the treatment, two different products, acid fluorides (AFs) and interchain carboxylic anhydrides (ICAs), were controllably obtained at surfaces under different reaction conditions with keeping the reagents the same. Various factors, such as the concentrations of reagents, reaction time, and additives, affected the product distribution (or the reaction pathway) at surfaces. We found that one of the key factors in controlling the reaction pathway was a relative contribution from the proximity effect of adjacent carboxylic acid chains in the SAMs (kinetic control) and the equilibrium shift (thermodynamic control). The relative reactivity of AF- and ICA-presenting surfaces toward primary amines, such as undecylamine and [((6-aminohexyl)amino)carbonyl]ferrocene, was also investigated, in terms of the number and the ordering of the amines coupled onto the surfaces.

Journal Article↗

In-plane enyne metathesis and subsequent Diels-Alder reactions on self-assembled monolayers.

We report in-plane enyne metathesis and subsequent Diels-Alder reactions on self-assembled monolayers (SAMs) terminating in vinyl and acetylenyl groups on gold. After the formation of SAMs of vinyl and acetylenyl group-containing dithiols on gold, in-plane enyne metathesis of the vinyl and acetylenyl groups, leading to the formation of 1,3-diene, was achieved on the SAMs, and Diels-Alder reactions were then successfully performed with tetracyanoethylene, maleic anhydride, and maleimide. The reactions were confirmed by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and time-of-flight secondary-ion mass spectrometry. In-plane enyne metathesis developed herein would offer a versatile platform for the functionalization of surfaces with mild reaction conditions and a high compatibility in functional groups.

Letter↗

Micropatterning proteins on polyhydroxyalkanoate substrates by using the substrate binding domain as a fusion partner.

A novel strategy for micropatterning proteins on the surface of polyhydroxyalkanoate (PHA) biopolymer by microcontact printing (microCP) is described. The substrate binding domain (SBD) of the Pseudomonas stutzeri PHA depolymerase was used as a fusion partner for specifically immobilizing proteins on PHA substrate. Enhanced green fluorescent protein (EGFP) and red fluorescent protein (RFP) fused to the SBD could be specifically immobilized on the micropatterns of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate). Laser scanning confocal microscopic studies suggested that two fusion proteins were micropatterned in their functionally active forms. Also, antibody binding assay by surface plasmon resonance suggested that protein-protein interaction studies could be carried out using this system.

Adsorption↗

Anion exchange-promoted Ru3+/2+ redox switch in self-assembled monolayers of imidazolium ions on a gold electrode.

1,3-Dialkylimidazolium salts, known as one of the ionic liquids, are very attractive molecules because their physicochemical properties can easily be tuned by the variation of the alkyl appendages of the imidazolium cations and counteranions. In this paper we report that the self-assembled monolayers (SAMs) terminating in 1,3-dialkylimidazolium salts with various counteranions [except Fe(CN)6(3-)] on a gold substrate exhibited a selective electron-transfer toward redox-probe molecules: the electron transfer occurred in the presence of Fe(CN)6(3-) (anionic redox-probe molecule) but did not occur in the presence of Ru(NH3)6(3+) (cationic redox-probe molecule). The SAM having Fe(CN)6(3-) as an anion showed the electron-transfer toward Ru(NH3)6(3+), and the Ru3+/2+ redox-switchable SAM was generated by reversible anion exchange between Fe(CN)6(3-) and SCN (or OCN-).

Letter↗

Surface-initiated growth of poly d(A-T) by Taq DNA polymerase.

In this paper, we report surface-initiated d(A-T) polymerization by Taq DNA polymerase as a method for constructing DNA-tethered surfaces using an enzyme. The enzymatic polymerization was conducted successfully via two steps: tethering of oligo d(A-T)s onto the surface presenting carboxylic acids by amide coupling and surface-initiated polymerization using Taq DNA polymerase. In this enzymatic polymerization process, the design and construction of carboxylic acid-presenting surfaces were found to be an important factor: DNA growth did not occur on the gold surface coated only with the self-assembled monolayer (SAM) of 16-mercaptohexadecanoic acid (MHDA), but effectively proceeded on the surfaces presenting mixed SAMs of MHDA and 1-pentadecanethiol. The coupling of oligo d(A-T)s and the subsequent DNA polymerization reaction were characterized by polarized infrared external reflectance spectroscopy, ellipsometry, X-ray photoelectron spectroscopy, and atomic force microscopy.

Gold↗

Biomimetic micropatterning of silica by surface-initiated polymerization and microcontact printing.

Micropatterns of silica on a gold substrate were generated by a biomimetic approach, namely, the biosilicification of silicic acids. The procedure consists of three simple steps: pattern generation of a polymerization initiator, (BrC(CH(3))(2)COO(CH(2))(11)S)(2), by microcontact printing; surface-initiated, atom-transfer radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) from the patterned area; and polycondensation of silicic acids. The tertiary amine-containing polymer, pDMAEMA, aided in the spatially controlled polycondensation of silicic acids on surfaces in the presence of phosphate ions, and micropatterns of silica on a gold substrate were successfully generated in combination with the technique of microcontact printing. The procedure could be extended to the controlled fabrication of silica patterns with any size, shape, or thickness.

Biocompatible Materials↗

Biomimetic formation of silica thin films by surface-initiated polymerization of 2-(dimethylamino)ethyl methacrylate and silicic acid.

Biosilicification in diatoms is achieved by specific interactions between silaffins, composed of polypeptides and long-chain polyamines, and silicic acid derivatives. The polycondensation of silicic acids is reported to be catalyzed by the long-chain polyamines that mainly contain tertiary N-methylpropyleneimine moieties. In this report, we utilized a tertiary amine-containing polymer, poly(2-(dimethylamino)ethyl methacrylate) (poly(DMAEMA)), as a surface-grafted, biomimetic counterpart of the long-chain polyamines in silaffins and demonstrated that the surface-initiated polycondensation of silicic acids, leading to the formation of silica thin films, proceeded smoothly on surfaces presenting poly(DMAEMA), where poly(DMAEMA) was grown from gold surfaces by surface-initiated, atom transfer radical polymerization. The formed silica film was characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, and scanning electron microscopy.

Gold↗

Micropatterns of spores displaying heterologous proteins.

Micropatterns of Bacillus thuringiensis spores were generated by a combination of surface chemistry, microcontact printing, and spore surface display technique. The outermost layers of B. thuringiensis spores were engineered to present enhanced green fluorescent protein (EGFP), and the biospecific interaction between biotin and streptavidin was utilized to spatially direct the EGFP-presenting spores onto the micropatterned surfaces. The viability of the micropatterned spores was confirmed by the pattern generation of vegetative cells after the germination.

Bacillus thuringiensis↗

Reactivity of acetylenyl-terminated self-assembled monolayers on gold: triazole formation.

We report the reactivity of acetylenyl-terminated self-assembled monolayers (SAMs) on gold toward "click" chemistry, Huisgen 1,3-dipolar addition, leading to the formation of triazoles. After the formation of acetylenyl-terminated SAMs, the triazole formation was performed on the SAMs and the reaction was confirmed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ellipsometry, and contact angle goniometry. "Click" chemistry has offered a versatile strategy for the functionalization in solution chemistry with mild reaction conditions and a high compatibility in functional groups, and our result shows that the reaction could be applied to acetylenyl-terminated SAMs for the introduction of useful functional groups to the surfaces.

Letter↗

Pattern generation of biological ligands on a biodegradable poly(glycolic acid) film.

The micropatterns of biological ligands (biotin and RGD peptides) were generated on a flat surface of biodegradable polymer, poly(glycolic acid) (PGA). The immobilization of biological ligands onto the surface of biodegradable polymers (especially aliphatic polyesters) is usually hampered by the absence of functionalizable groups on the polymer backbone. We demonstrate herein that PGA polymer films were modified by surface hydrolysis to introduce carboxylic acid groups on the film surfaces, which were subsequently used for patterning amine-terminated ligands by microcontact printing. Fluorescence microscopy was used to verify the pattern of biotin on the surface of the PGA films after complexation with fluorescein-conjugated streptavidin. In addition, the cellular micropatterns were obtained from micropatterns of RGD peptides on the surface-hydrolyzed PGA films.

Biodegradation, Environmental↗

Imidazolium ion-terminated self-assembled monolayers on Au: effects of counteranions on surface wettability.

Self-assembled monolayers presenting imidazolium ions at the tail ends (SAMIMs) having different counteranions have been prepared on Au, and the measurement of water contact angles of the surfaces proved to be an extremely valuable simple technique for quantifying the effects of counteranions on hydrophilicity and hydrophobicity of SAMIMs, which will be extrapolated to the water miscibility of the related ionic liquids.

Journal Article↗