PubMed Health⌕ Search

Biomedical subjects

James R Heath

Publications and source records attributed to James R Heath.

At least 37 records · Page 2Linked to original sources

Bridging dimensions: demultiplexing ultrahigh-density nanowire circuits.

A demultiplexer is an electronic circuit designed to separate two or more combined signals. We report on a demultiplexer architecture for bridging from the submicrometer dimensions of lithographic patterning to the nanometer-scale dimensions that can be achieved through nanofabrication methods for the selective addressing of ultrahigh-density nanowire circuits. Order log2(N) large wires are required to address N nanowires, and the demultiplexer architecture is tolerant of low-precision manufacturing. This concept is experimentally demonstrated on submicrometer wires and on an array of 150 silicon nanowires patterned at nanowire widths of 13 nanometers and a pitch of 34 nanometers.

Journal Article↗

The first studies of a tetrathiafulvalene-sigma-acceptor molecular rectifier.

Langmuir-Blodgett monolayers of a donor-acceptor diad TTF-sigma-(trinitrofluorene) (8) with an extremely low HOMO-LUMO gap (0.3 eV) have been used to create molecular junction devices that show rectification behavior. By virtue of structural similarities and position of molecular orbitals, 8 is the closest well-studied analogue of the model Aviram-Ratner unimolecular rectifier (TTF-sigma-TCNQ). Compressing the monolayer results in aligning the molecules, and is followed by a drastic increase in the rectification ratio. The direction of rectification depends on the electrodes used and is different in n-Si/8/Ti and Au/8/C16H33S-Hg junctions. The molecular nature of such behavior was corroborated by control experiments with fatty acids and by reversing the rectification direction with changing the molecular orientation (Au/D-sigma-A versus Au/A-sigma-D).

Journal Article↗

Structures and properties of self-assembled monolayers of bistable [2]rotaxanes on Au (111) surfaces from molecular dynamics simulations validated with experiment.

Bistable [2]rotaxanes display controllable switching properties in solution, on surfaces, and in devices. These phenomena are based on the electrochemically and electrically driven mechanical shuttling motion of the ring-shaped component, cyclobis(paraquat-p-phenylene) (CBPQT(4+)) (denoted as the ring), between a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) ring system located along a dumbbell component. When the ring is encircling the TTF unit, this co-conformation of the rotaxane is the most stable and thus designated the ground-state co-conformer (GSCC), whereas the other co-conformation with the ring surrounding the DNP ring system is less favored and so designated the metastable-state co-conformer (MSCC). We report here the structure and properties of self-assembled monolayers (SAMs) of a bistable [2]rotaxane on Au (111) surfaces as a function of surface coverage based on atomistic molecular dynamics (MD) studies with a force field optimized from DFT calculations and we report several experiments that validate the predictions. On the basis of both the total energy per rotaxane and the calculated stress that is parallel to the surface, we find that the optimal packing density of the SAM corresponds to a surface coverage of 115 A(2)/molecule (one molecule per 4 x 4 grid of surface Au atoms) for both the GSCC and MSCC, and that the former is more stable than the latter by 14 kcal/mol at the optimum packing density. We find that the SAM retains hexagonal packing, except for the case at twice the optimum packing density (65 A(2)/molecule, the 3 x 3 grid). For the GSCC and MSCC, investigated at the optimum coverage, the tilt of the ring with respect to the normal is theta = 39 degrees and 61 degrees, respectively, while the tilt angle of the entire rotaxane is psi = 41 degrees and 46 degrees , respectively. Although the tilt angle of the ring decreases with decreasing surface coverage, the tilt angle of the rotaxane has a maximum at 144 A(2)/molecule (the 4 x 5 grid/molecule) of 50 degrees and 51 degrees for the GSCC and MSCC, respectively. The hexafluorophosphate counterions (PF(6)(-)) stay localized around the ring during the 2 ns MD simulation. On the basis of the calculated density profile, we find that the thickness of the SAM is 40.5 A at the optimum coverage for the GSCC and 40.0 A for MSCC, and that the thicknesses become less with decreasing surface coverage. The calculated surface tension at the optimal packing density is 45 and 65 dyn/cm for the GSCC and MSCC, respectively. This difference suggests that the water contact angle for the GSCC is larger than for the MSCC, a prediction that is verified by experiments on Langmuir-Blodgett monolayers of amphiphilic [2]rotaxanes.

Journal Article↗

Low-temperature STM images of methyl-terminated Si(111) surfaces.

Low-temperature scanning tunneling microscopy (STM) has been used to image CH(3)-terminated Si(111) surfaces that were prepared through a chlorination/alkylation procedure. The STM data revealed a well-ordered structure commensurate with the atop sites of an unreconstructed 1 x 1 overlayer on the silicon (111) surface. Images collected at 4.7 K revealed bright spots, separated by 0.18 +/- 0.01 nm, which are assigned to adjacent H atoms on the same methyl group. The C-H bonds in each methyl group were observed to be rotated by 7 +/- 3 degrees away from the center of an adjacent methyl group and toward an underlying Si atom. Hence, the predominant interaction that determines the surface structure arises from repulsions between hydrogen atoms on neighboring methyl groups, and secondary interactions unique to the surface are also evident.

Hydrocarbons↗

The role of physical environment on molecular electromechanical switching.

The influences of different physical environments on the thermodynamics associated with one key step in the switching mechanism for a pair of bistable catenanes and a pair of bistable rotaxanes have been investigated systematically. The two bistable catenanes are comprised of a cyclobis(paraquat-p-phenylene) (CBPQT4+) ring, or its diazapyrenium-containing analogue, that are interlocked with a macrocyclic polyether component that incorporates the strong tetrathiafulvalene (TTF) donor unit and the weaker 1,5-dioxynaphthalene (DNP) donor unit. The two bistable rotaxanes are comprised of a CBPQT4+ ring, interlocked with a dumbbell component in which one incorporates TTF and DNP units, whereas the other incorporates a monopyrrolotetrathiafulvalene (MPTTF) donor and a DNP unit. Two consecutive cycles of a variable scan rate cyclic voltammogram (10-1500 mV s(-1)) performed on all of the bistable switches (approximately 1 mM) in MeCN electrolyte solutions (0.1 M tetrabutylammonium hexafluorophosphate) across a range of temperatures (258-303 K) were recorded in a temperature-controlled electrochemical cell. The second cycle showed different intensities of the two features that were observed in the first cycle when the cyclic voltammetry was recorded at fast scan rates and low temperatures. The first oxidation peak increases in intensity, concomitant with a decrease in the intensity of the second oxidation peak. This variation changed systematically with scan rate and temperature and has been assigned to the molecular mechanical movements within the catenanes and rotaxanes of the CBPQT4+ ring from the DNP to the TTF unit. The intensities of each peak were assigned to the populations of each co-conformation, and the scan-rate variation of each population was analyzed to obtain kinetic and thermodynamic data for the movement of the CBPQT4+ ring. The Gibbs free energy of activation at 298 K for the thermally activated movement was calculated to be 16.2 kcal mol(-1) for the rotaxane, and 16.7 and 19.2 kcal mol(-1) for the bipyridinium- and diazapyrenium-based bistable catenanes, respectively. These values differ from those obtained for the shuttling and circumrotational motions of degenerate rotaxanes and catenanes, respectively, indicating that the detailed chemical structure influences the rates of movement. In all cases, when the same bistable compounds were characterized in an electrolyte gel, the molecular mechanical motion slowed down significantly, concomitant with an increase in the activation barriers by more than 2 kcal mol(-1). Irrespective of the environment--solution, self-assembled monolayer or solid-state polymer gel--and of the molecular structure--rotaxane or catenane--a single and generic switching mechanism is observed for all bistable molecules.

Journal Article↗

Electrochemically programmed, spatially selective biofunctionalization of silicon wires.

A method for the spatially selective biofunctionalization of silicon micro- and nanostructures is reported, and results are presented for both single-crystal silicon (111) or (100) surfaces. An electroactive monolayer of hydroquinone was formed on the surface of H-terminated silicon working electrodes via an olefin reaction with UV-generated surface radicals. Molecules presenting either cyclopentadiene or a thiol group can be immobilized onto the regions where the hydroquinone has been oxidized. Molecular size and crystal orientation are evaluated as important factors that dictate the electrode stability in aqueous solution under anodic potentials. Monolayers composed of smaller molecules on (111) surfaces exhibit the highest packing density and are more effective in preventing anodic oxidation of the underlying substrate. Voltammetry, X-ray photoelectron spectroscopy, and atomic force and fluorescence microscopy are utilized to interrogate the kinetic rates of biofunctionalization, the extent of surface coverage, monolayer quality, and the spatial selectivity of the process.

Alkenes↗

Systems biology and new technologies enable predictive and preventative medicine.

Systems approaches to disease are grounded in the idea that disease-perturbed protein and gene regulatory networks differ from their normal counterparts; we have been pursuing the possibility that these differences may be reflected by multiparameter measurements of the blood. Such concepts are transforming current diagnostic and therapeutic approaches to medicine and, together with new technologies, will enable a predictive and preventive medicine that will lead to personalized medicine.

Biomarkers↗

Silicon chip-based patch-clamp electrodes integrated with PDMS microfluidics.

We report on a silicon wafer-based device that can be used for recording macroscopic ion channel protein activities across a diverse group of cell-types. Gigaohm seals were achieved for CHO-K1 and RIN m5F cells, and both cell-attached and whole-cell mode configurations were also demonstrated. Two distinct intrinsic potassium ion channels were recorded in whole-cell mode for HIT-T15 and RAW 264.7 cells. Polydimethylsiloxane (PDMS) microfluidics were also coupled with the micromachined silicon chips in order to demonstrate that a single cell could be selectively directed to a micropore, and membrane protein currents could subsequently be recorded. These silicon chip-based devices have significant advantages over traditional micropipette approaches, and may serve as combinatorial tools for investigating membrane biophysics, pharmaceutical screening, and other bio-sensing tasks.

Animals↗

Single-walled carbon nanotube based molecular switch tunnel junctions.

This article describes two-terminal molecular switch tunnel junctions (MSTJs) which incorporate a semiconducting, single-walled carbon nanotube (SWNT) as the bottom electrode. The nanotube interacts noncovalently with a monolayer of bistable, nondegenerate [2]catenane tetracations, self-organized by their supporting amphiphilic dimyristoylphosphatidyl anions which shield the mechanically switchable tetracations from a two-micrometer wide metallic top electrode. The resulting 0.002 micron 2 area tunnel junction addresses a nanometer wide row of approximately 2000 molecules. Active and remnant current-voltage measurements demonstrated that these devices can be reconfigurably switched and repeatedly cycled between high and low current states under ambient conditions. Control compounds, including a degenerate [2]catenane, were explored in support of the mechanical origin of the switching signature. These SWNT-based MSTJs operate like previously reported silicon-based MSTJs, but differently from similar devices incorporating bottom metal electrodes. The relevance of these results with respect to the choice of electrode materials for molecular electronics devices is discussed.

Journal Article↗

Ultrahigh-density nanowire lattices and circuits.

We describe a general method for producing ultrahigh-density arrays of aligned metal and semiconductor nanowires and nanowire circuits. The technique is based on translating thin film growth thickness control into planar wire arrays. Nanowires were fabricated with diameters and pitches (center-to-center distances) as small as 8 nanometers and 16 nanometers, respectively. The nanowires have high aspect ratios (up to 10(6)), and the process can be carried out multiple times to produce simple circuits of crossed nanowires with a nanowire junction density in excess of 10(11) per square centimeter. The nanowires can also be used in nanomechanical devices; a high-frequency nanomechanical resonator is demonstrated.

Journal Article↗

Two-dimensional molecular electronics circuits.

Addressing an array of bistable [2]rotaxanes through a two-dimensional crossbar arrangement provides the device element of a current-driven molecular electronic circuit. The development of the [2]rotaxane switches through an iterative, evolutionary process is described. The arrangement reported here allows both memory and logic functions to use the same elements.

Journal Article↗