PubMed Health⌕ Search

Biomedical subjects

John F Hartwig

Publications and source records attributed to John F Hartwig.

At least 37 records · Page 2Linked to original sources
PubMed2006

A highly active palladium catalyst for intermolecular hydroamination. Factors that control reactivity and additions of functionalized anilines to dienes and vinylarenes.

We report a catalyst for intermolecular hydroamination of vinylarenes that is substantially more active for this process than catalysts published previously. With this more reactive catalyst, we demonstrate that additions of amines to vinylarenes and dienes occur in the presence of potentially reactive functional groups, such as ketones with enolizable hydrogens, free alcohols, free carboxylic acids, free amides, nitriles, and esters. The catalyst for these reactions is generated from [Pd(eta(3)-allyl)Cl](2) (with or without added AgOTf) or [Pd(CH(3)CN)(4)](BF(4))(2) and Xantphos (9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene), which generates complexes with large P-Pd-P bite angles. Studies on the rate of the C-N bond-forming step that occurs by attack of amine on an eta(3)-phenethyl and an eta(3)-allyl complex were conducted to determine the effect of the bite angle on the rate of this nucleophilic attack. Studies on model eta(3)-benzyl complexes containing various bisphosphines showed that the nucleophilic attack was faster for complexes containing larger P-Pd-P bite angles. Studies of substituted unsymmetrical and unsubstituted symmetrical model eta(3)-allyl complexes showed that nucleophilic attack on complexes ligated by Xantphos was faster than on complexes bearing ligands with smaller bite angles and that nucleophilic attack on unsymmetrical allyl complexes with larger bite angle ligands was faster than on unsymmetrical allyl complexes with smaller bite angle ligands. However, monitoring of catalytic reactions of dienes by (31)P NMR spectroscopy showed that the concentration of active catalyst was the major factor that controlled rates for reactions of symmetrical dienes catalyzed by complexes of phosphines with smaller bite angles. The identity of the counterion also affected the rate of attack: reactions of allylpalladium complexes with chloride counterion occurred faster than reactions of allylpalladium complexes with triflate or tetrafluoroborate counterion. As is often observed, the dynamics of the allyl and benzyl complexes also depended on the identity of the counterion.

Alkenes↗
PubMed2005

Iridium-catalyzed regio- and enantioselective allylation of ketone enolates.

The regio- and enantioselective alpha-allylation of unstabilized ketone enolates with unsymmetrical allylic carbonates to form the branched substitution products in the presence of metallacyclic iridium catalysts is reported. The products, branched gamma,delta-unsaturated ketones, were obtained from readily available silyl enol ethers and achiral Boc-protected allylic alcohols in high regioselectivities and enantioselectivities (91-96% ee). The combination of CsF and ZnF2 was shown to promote this reaction and suppress the formation of diallylation byproducts. In addition, iridium complexes derived from simple phosphoramidite ligands were shown to catalyze this reaction with excellent selectivities, and spectroscopic data show that a cyclometalated Ir precatalyst is formed in situ. This process provides an enantioselective access to synthetically important bifunctional compounds, which are generally accessible, but in racemic form, through Claisen rearrangements. Ten examples of the reactions of aromatic, as well as aliphatic, substrates are reported.

Catalysis↗
PubMed2005

Mild palladium-catalyzed selective monoarylation of nitriles.

Two new palladium-catalyzed procedures for the arylation of nitriles under less basic conditions than previously reported have been developed. The selective monoarylation of acetonitrile and primary nitriles has been achieved using alpha-silyl nitriles in the presence of ZnF2. This procedure is compatible with a variety of functional groups, including cyano, keto, nitro, and ester groups, on the aryl bromide. The arylation of secondary nitriles occurred in high yield by conducting reactions with zinc cyanoalkyl reagents. These reaction conditions tolerated base-sensitive functional groups, such as ketones and esters. The combination of these two methods, one with alpha-silyl nitriles and one with zinc cyanoalkyl reagents, provides a catalytic route to a variety of benzylic nitriles, which have not only biological significance but utility as synthetic intermediates. The utility of these new coupling reactions has been demonstrated by a synthesis of verapamil, a clinically used drug for the treatment of heart disease, by a three-step route from commercial materials that allows convenient variation of the aryl group.

Anti-Arrhythmia Agents↗
PubMed2005

Kumada coupling of aryl and vinyl tosylates under mild conditions.

[Reaction: see text]. Aryl and alkenyl tosylates are easily prepared, inexpensive and, thus, attractive for transition-metal-catalyzed couplings, but their reactivity is low. We report examples of mild, palladium-catalyzed coupling of aryl, alkenyl, and alkyl Grignard reagents with aryl and alkenyl tosylates. The resulting biaryls, vinylarenes, and alkylarenes were isolated in good to excellent yield. These couplings were conducted with a nearly equimolar ratio of the two reactants, and many examples were conducted at room temperature.

Catalysis↗
PubMed2005

A simple iridium catalyst with a single resolved stereocenter for enantioselective allylic amination. Catalyst selection from mechanistic analysis.

A study of the relationship between the stereochemical elements of a phosphoramidite ligand and the stereoselectivity of iridium-catalyzed amination of allylic carbonates is reported. During catalyst activation, a complex of a phosphoramidite ligand possessing one axial chiral binaphtholate group and two resolved phenethyl substituents converts to a more reactive cyclometalated complex containing one distal chiral substituent at nitrogen, one substituent that becomes part of the metalacycle, and one unperturbed binaphtholate group. Systematic changes were made to the different stereochemical elements. Replacement of the distal chiral phenethyl substituent with a large achiral cycloalkyl group led to a catalyst that reacts with rates and enantioselectivities that are similar to those of the original catalyst with the phenethyl group. Studies of the reactions of diastereomeric ligands containing (R) or (S) binaphtholate groups on phosphorus, along with one (R)-phenethyl and one achiral cyclododecyl group on nitrogen, show that the complexes of the two diastereomeric ligands undergo cyclometalation at much different rates. To access both diastereomeric catalysts and to determine if the reaction can occur selectively with an even simpler ligand containing a phenethyl substituent at nitrogen as the only resolved stereochemical element, the catalyst derived from a phosphoramidite containing a biphenolate group was studied. Catalysts generated from this ligand were shown to react in all cases examined with nearly the same rates, regioselectivities, and enantioselectivities as catalysts derived from the original more elaborate ligand. The absolute stereochemistry of the product implies that the major enantiomer is formed from the (R(a),R(c))-atropisomer of the catalyst containing the biphenolate group.

Journal Article↗
PubMed2005

Mechanism of the mild functionalization of arenes by diboron reagents catalyzed by iridium complexes. Intermediacy and chemistry of bipyridine-ligated iridium trisboryl complexes.

This paper describes mechanistic studies on the functionalization of arenes with the diboron reagent B(2)pin(2) (bis-pinacolato diborane(4)) catalyzed by the combination of 4,4'-di-tert-butylbipyridine (dtbpy) and olefin-ligated iridium halide or olefin-ligated iridium alkoxide complexes. This work identifies the catalyst resting state as [Ir(dtbpy)(COE)(Bpin)(3)] (COE = cyclooctene, Bpin = 4,4,5,5-tetramethyl-1,3,2-dioxaborolanyl). [Ir(dtbpy)(COE)(Bpin)(3)] was prepared by independent synthesis in high yield from [Ir(COD)(OMe)](2), dtbpy, COE, and HBpin. This complex is formed in low yield from [Ir(COD)(OMe)](2), dtbpy, COE, and B(2)pin(2). Kinetic studies show that this complex reacts with arenes after reversible dissociation of COE. An alternative mechanism in which the arene reacts with the Ir(I) complex [Ir(dtbpy)Bpin] after dissociation of COE and reductive elimination of B(2)pin(2) does not occur to a measurable extent. The reaction of [Ir(dtbpy)(COE)(Bpin)(3)] with arenes and the catalytic reaction of B(2)pin(2) with arenes catalyzed by [Ir(COD)(OMe)](2) and dtbpy occur faster with electron-poor arenes than with electron-rich arenes. However, both the stoichiometric and catalytic reactions also occur faster with the electron-rich heteroarenes thiophene and furan than with arenes, perhaps because eta(2)-heteroarene complexes are more stable than the eta(2)-arene complexes and the eta(2)-heteroarene or arene complexes are intermediates that precede oxidative addition. Kinetic studies on the catalytic reaction show that [Ir(dtbpy)(COE)(Bpin)(3)] enters the catalytic cycle by dissociation of COE, and a comparison of the kinetic isotope effects of the catalytic and stoichiometric reactions shows that the reactive intermediate [Ir(dtbpy)(Bpin)(3)] cleaves the arene C-H bond. The barriers for ligand exchange and C-H activation allow an experimental assessment of several conclusions drawn from computational work. Most generally, our results corroborate the conclusion that C-H bond cleavage is turnover-limiting, but the experimental barrier for this bond cleavage is much lower than the calculated barrier.

Benzene Derivatives↗
PubMed2005

Transfer of amido groups from isolated rhodium(I) amides to alkenes and vinylarenes.

The reaction of monomeric and dimeric rhodium(I) amido complexes with unactivated olefins to generate imines is reported. Transamination of {(PEt(3))(2)RhN(SiMePh(2))(2)} (1a) or its -N(SiMe(3))(2) analogue 1b with p-toluidine gave the dimeric [(PEt(3))(2)Rh(mu-NHAr)](2) (Ar = p-tolyl) (2a) in 80% isolated yield. Reaction of 2a with PEt(3) generated the monomeric (PEt(3))(3)Rh(NHAr) (Ar = p-tolyl) (3a). PEt(3)-ligated arylamides 2a and 3a reacted with styrene to transfer the amido group to the olefin and to form the ketimine Ph(Me)C=N(p-tol) (4a) in 48-95% yields. The dinuclear amido hydride (PEt(3))(4)Rh(2)(mu-NHAr)(mu-H) (Ar = p-tolyl) (5a) was formed from reaction of 2a in 95% yield, and a mixture of this dimeric species and the (PEt(3))(n)RhH complexes with n = 3 and 4 was formed from reaction of 3a in a combined 75% yield. Propene reacted with 2a to give Me(2)C=N(p-tol) (4b) and 5a in 90 and 57% yields. Propene also reacted with 3a to give 4b and 5a in 65 and 94% yields. Analogues of 2a and 3a with varied electronic properties also reacted with styrene to form the corresponding imines, and moderately faster rates were observed for reactions of electron-rich arylamides. Kinetic studies of the reaction of 3a with styrene were most consistent with formation of the imine by migratory insertion of olefin into the rhodium-amide bond to generate an aminoalkyl intermediate that undergoes beta-hydrogen elimination to generate a rhodium hydride and an enamine that tautomerizes to the imine.

Journal Article↗
PubMed2005

Beta-aryl eliminations from Rh(I) iminyl complexes.

beta-Aryl eliminations from a series of iminyl complexes to form rhodium aryl complexes and free nitriles are reported. Iminyl complexes [Rh(PEt3)3(N=CArAr')] were prepared from [Rh(COE)Cl]2, PEt3, LiN(SiMe3)2, and the imines HN=CArAr'. One example of these complexes was characterized by X-ray diffraction. Heating of these complexes in cyclohexane generated the rhodium aryl complexes and free nitriles in high yields; heating in benzene formed the same products in slightly lower yields. Complexes with varied aryl groups on the imine were studied to assess the migratory aptitudes of the aryl groups. Migration of the o-anisyl group occurred much faster than migration of a phenyl group; migration of a phenyl group occurred slightly faster than migration of the more electron-rich p-anisyl group; and migration of a phenyl group occurred slightly faster than migration of the more hindered o-tolyl group. Kinetic studies showed that the reaction was inverse first-order in the concentration of added phosphine and zero-order in added nitrile. These results show that the beta-aryl elimination most likely occurs by dissociation of phosphine from the starting complex and carbon-carbon bond cleavage of the resulting 14-electron intermediate.

Crystallography, X-Ray↗
PubMed2005

Distinct mechanisms for the oxidative addition of chloro-, bromo-, and iodoarenes to a bisphosphine palladium(0) complex with hindered ligands.

We report an example of a bisphosphine palladium(0) complex with hindered ligands that undergoes oxidative addition of chloro-, bromo-, and iodoarenes in high yield. Addition of PhX (X = I, Br, Cl) to [Pd(Q-phos-tol)2] produced [Pd(Q-phos-tol)(Ph)(I)], [Pd(Q-phos-tol)(Ph)(Br)], and [Pd(Q-phos-tol)(Ph)(Cl)]2. To study the mechanisms of the oxidative addition of the three haloarenes to [Pd(Q-phos-tol)2], we determined the order of the reaction on the concentration of ligand and haloarene. The different haloarenes reacted through different mechanistic pathways. Addition of iodobenzene occurred by irreversible associative displacement of a phosphine. Addition of bromobenzene occurred by rate-limiting dissociation of phosphine. Addition of chlorobenzene occurred by reversible dissociation of phosphine, followed by rate-limiting oxidative addition. The mechanism of exchange of ligands from the Pd(0)L2 was also studied. The rate constant value for dissociation of ligand calculated from ligand exchange experiments is in agreement with the value calculated through experiments on oxidative addition.

Benzene Derivatives↗
PubMed2005

Mechanistic Studies of Ruthenium-Catalyzed Anti-Markovnikov Hydroamination of Vinylarenes: Intermediates and Evidence for Catalysis through pi-Arene Complexes.

Studies are described that reveal the steps of the anti-Markovnikov hydroamination of vinylarenes with alkylamines catalyzed by Ru(COD)(2-methylallyl)2, bis(diphenylphosphino)pentane, and TfOH. Treatment of the catalyst components with an excess of styrene under the catalytic reaction conditions afforded a new ruthenium eta6-styrene complex with an ancillary tridentate PCP ligand. This ruthenium complex was active as catalyst for the hydroamination of styrene with morpholine to give the anti-Markovnikov adduct as a single regioisomer in high yield. Studies of the reactivity of the eta6-styrene complex revealed two reactions that comprise a catalytic cycle for anti-Markovnikov hydroamination: nucleophilic addition of morpholine to the ruthenium eta6-styrene complex to afford a ruthenium eta6-(2-aminoethyl)benzene complex and arene exchange of the ruthenium eta6-(2-aminoethyl)benzene complex with styrene to regenerate the ruthenium eta6-styrene complex. The addition of morpholine and the exchange of arene occurred with comparable rates. These results strongly suggest that the ruthenium-catalyzed anti-Markovnikov addition of alkylamines to vinylarenes occurs by a new reaction mechanism for hydroamination involving nucleophilic attack on the eta6-vinylarene complex and exchange of the aminoalkylarene complex product with free vinylarene. This mechanism is a rare example of catalytic chemistry through pi-arene complexes. These mechanistic data were used to select derivatives of the DPPP ligand that improve the rates of the catalytic process.

Amination↗
PubMed2005

Intermolecular and intramolecular, platinum-catalyzed, acceptorless dehydrogenative coupling of hydrosilanes with aryl and aliphatic methyl C-H bonds.

Intermolecular acceptorless dehydrogenative coupling of silanes with arene C-H bonds and intramolecular coupling of silanes with aryl and alkyl C-H bonds occur in good yield in the presence of 5 mol % of TpMe2PtMe2H (TpMe2 = hydridotris(3,5-dimethylpyrazolyl)borate) and related platinum(IV) complexes. The intermolecular reactions of arenes occurred with both trialkyl and dialkylaryl silanes. Intramolecular reactions of dialkylsilylalkylarenes occurred at aryl C-H bonds, and reactions of tributylsilane or dibutylphenylsilane occurred intramolecularly at the aliphatic, primary C-H bond. The reactions of arenes occurred preferentially at the least sterically hindered C-H bonds and preferentially with more electron-poor arenes. Crossover experiments and the lack of reactivity of the arylsilanes with H2 imply that the dehydrogenative silylation of arenes can be irreversible, even in a closed reaction vessel.

Journal Article↗
PubMed2005

Effects of catalyst activation and ligand steric properties on the enantioselective allylation of amines and phenoxides.

[reaction: see text] The yields, enantioselectivities, and regioselectivities of the reactions of amines and phenoxides with allylic carbonates in the presence of a metallacyclic iridium catalyst were compared. These data show that both preactivation of the catalyst and the size of the ligand affect the yield, enantioselectivity, and regioselectivity. With the activated catalyst containing a bis-naphthethylamino group, the allylic amination and etherification of a broad range of allylic carbonates occurred in high yields and with high regioselectivities and enantioselectivities.

Journal Article↗
PubMed2005

Zinc trimethylsilylamide as a mild ammonia equivalent and base for the amination of aryl halides and triflates.

[reaction: see text] We report that Zn[N(SiMe(3))(2)](2) is a mild ammonia equivalent and base for the palladium-catalyzed amination of aryl halides and triflates. In contrast to LiN(SiMe(3))(2), the combination of Zn[N(SiMe(3))(2)](2) and LiCl coupled with aryl halides and triflates containing base-sensitive functionality in high yields. In addition, aryl bromides coupled with aryl and alkylamines with the combination of Zn[N(SiMe(3))(2)](2) and LiCl as base. These aminations occurred without racemization of the enolizable stereocenter of an optically active ester.

Amination↗
PubMed2005

Rhodium boryl complexes in the catalytic, terminal functionalization of alkanes.

A series of studies have been conducted by experimental and theoretical methods on the synthesis, structures, and reactions of CpRh boryl complexes that are likely intermediates in the rhodium-catalyzed regioselective, terminal functionalization of alkanes. The photochemical reaction of CpRh(eta(6)-C(6)Me(6)) with pinacolborane (HBpin) generates the bisboryl complex CpRh(H)(2)(Bpin)(2) (2), which reacts with neat HBpin to generate CpRh(H)(Bpin)(3) (3). X-ray diffraction, density functional theory (DFT) calculations, and NMR spectroscopy suggest a weak, but measurable, B-H bonding interaction. Both 2 and 3 dissociate HBpin and coordinate PEt(3) or P(p-Tol)(3) to generate the conventional rhodium(III) species CpRh(PEt(3))(H)(Bpin) (4) and CpRh[P(p-tol)(3)](Bpin)(2) (5). Compounds 2 and 3 also react with alkanes and arenes to form alkyl- and arylboronate esters at temperatures similar to or below those of the catalytic borylation of alkanes and arenes. Further, these compounds were observed directly in catalytic reactions. The enthalpies and free energies for generation of the 16-electron intermediate and for the C-H bond cleavage and B-C bond formation have been calculated with DFT. These results strongly suggest that the C-H bond cleavage process occurs by a metal-assisted sigma-bond metathesis mechanism to generate a borane complex that isomerizes if necessary to place the alkyl group cis to the boryl group. This complex with cis boryl and alkyl groups then undergoes B-C bond formation by a second sigma-bond metathesis to generate the final functionalized product.

Journal Article↗
PubMed2005

Oxidative addition of ammonia to form a stable monomeric amido hydride complex.

The insertion of an iridium complex into an N-H bond in ammonia leads to a stable monomeric amido hydride complex in solution at room temperature. This reaction advances the transition-metal coordination chemistry of ammonia beyond its role for more than a century as an ancillary ligand. The precursor for this insertion reaction is an iridium(I) olefin complex with an aliphatic ligand containing one carbon and two phosphorus donor atoms. Kinetic and isotopic labeling studies indicate that olefin dissociates to give a 14-electron iridium(I) fragment, which then reacts with ammonia. This cleavage of the N-H bond under neutral conditions provides a foundation on which to develop future mild catalytic transformations of ammonia, such as olefin hydroamination and arene oxidative amination.

Journal Article↗
PubMed2005

Catalytic hydroxylation of polypropylenes.

The regioselective functionalization of both model and commercial polypropylenes of varying tacticity has been conducted by a rhodium-catalyzed functionalization of the methyl C-H bonds of the polymer with diboron reagents. Rhodium-catalyzed borylation of the polypropylenes, followed by oxidation of the boron-containing material, produced polymers containing 0.2-1.5% hydroxymethyl side chains. Both the number-average molecular weights and molecular weight distributions of the polypropylenes were essentially unchanged after the catalytic and oxidative functionalization process. The efficiency of the borylation process was affected by the molecular weight of the polymer, the steric hindrance around the methyl groups, and the ratio of the diboron reagent to the monomer repeat unit. The hydroxylated derivative of the commercial isotactic polypropylene was used as macroinitiator for the aluminum-mediated ring-opening polymerization of epsilon-caprolactone to prepare polypropylene-graft-polycaprolactone. This graft copolymer was an effective compatibilizer for melt blends of polypropylene and polycaprolactone.

Journal Article↗